123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263 |
- /*
- * Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
- #include <linux/types.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mtd/plat-ram.h>
- #include <linux/memory.h>
- #include <linux/gpio.h>
- #include <linux/smsc911x.h>
- #include <linux/interrupt.h>
- #include <linux/i2c.h>
- #include <linux/i2c/at24.h>
- #include <mach/hardware.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/time.h>
- #include <asm/mach/map.h>
- #include <mach/common.h>
- #include <mach/imx-uart.h>
- #include <mach/iomux-mx3.h>
- #include <mach/board-pcm037.h>
- #include <mach/mxc_nand.h>
- #include <mach/mmc.h>
- #ifdef CONFIG_I2C_IMX
- #include <mach/i2c.h>
- #endif
- #include "devices.h"
- static struct physmap_flash_data pcm037_flash_data = {
- .width = 2,
- };
- static struct resource pcm037_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
- };
- static struct platform_device pcm037_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm037_flash_data,
- },
- .resource = &pcm037_flash_resource,
- .num_resources = 1,
- };
- static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
- };
- static struct resource smsc911x_resources[] = {
- [0] = {
- .start = CS1_BASE_ADDR + 0x300,
- .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
- };
- static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
- SMSC911X_SAVE_MAC_ADDRESS,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- };
- static struct platform_device pcm037_eth = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
- };
- static struct platdata_mtd_ram pcm038_sram_data = {
- .bankwidth = 2,
- };
- static struct resource pcm038_sram_resource = {
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 512 * 1024 - 1,
- .flags = IORESOURCE_MEM,
- };
- static struct platform_device pcm037_sram_device = {
- .name = "mtd-ram",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_sram_data,
- },
- .num_resources = 1,
- .resource = &pcm038_sram_resource,
- };
- static struct mxc_nand_platform_data pcm037_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
- };
- #ifdef CONFIG_I2C_IMX
- static int i2c_1_pins[] = {
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
- };
- static int pcm037_i2c_1_init(struct device *dev)
- {
- return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
- "i2c-1");
- }
- static void pcm037_i2c_1_exit(struct device *dev)
- {
- mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
- }
- static struct imxi2c_platform_data pcm037_i2c_1_data = {
- .bitrate = 100000,
- .init = pcm037_i2c_1_init,
- .exit = pcm037_i2c_1_exit,
- };
- static struct at24_platform_data board_eeprom = {
- .byte_len = 4096,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
- };
- static struct i2c_board_info pcm037_i2c_devices[] = {
- {
- I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
- .platform_data = &board_eeprom,
- }, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563",
- }
- };
- #endif
- static int sdhc1_pins[] = {
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- };
- static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
- {
- return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
- "sdhc-1");
- }
- static void pcm970_sdhc1_exit(struct device *dev, void *data)
- {
- mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
- }
- /* No card and rw detection at the moment */
- static struct imxmmc_platform_data sdhc_pdata = {
- .init = pcm970_sdhc1_init,
- .exit = pcm970_sdhc1_exit,
- };
- static struct platform_device *devices[] __initdata = {
- &pcm037_flash,
- &pcm037_eth,
- &pcm037_sram_device,
- };
- static int uart0_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
- };
- static int uart2_pins[] = {
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3
- };
- /*
- * Board specific initialization.
- */
- static void __init mxc_board_init(void)
- {
- platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
- mxc_register_device(&mxc_w1_master_device, NULL);
- /* SMSC9215 IRQ pin */
- if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- "pcm037-eth"))
- gpio_direction_input(MX31_PIN_GPIO3_1);
- #ifdef CONFIG_I2C_IMX
- i2c_register_board_info(1, pcm037_i2c_devices,
- ARRAY_SIZE(pcm037_i2c_devices));
- mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
- #endif
- mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
- mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
- }
- static void __init pcm037_timer_init(void)
- {
- mx31_clocks_init(26000000);
- }
- struct sys_timer pcm037_timer = {
- .init = pcm037_timer_init,
- };
- MACHINE_START(PCM037, "Phytec Phycore pcm037")
- /* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
- .init_irq = mxc_init_irq,
- .init_machine = mxc_board_init,
- .timer = &pcm037_timer,
- MACHINE_END
|