| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475 |
- How to set up the Technisat/B2C2 Flexcop devices
- ================================================
- 1) Find out what device you have
- ================================
- First start your linux box with a shipped kernel:
- lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
- 02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
- dmesg | grep frontend may show you for example:
- DVB: registering frontend 0 (Conexant CX24123/CX24109)...
- 2) Kernel compilation:
- ======================
- If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
- "Multimedia devices" => "Customise analog and hybrid tuner modules to build"
- In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
- Then please activate:
- 2a) Main module part:
- a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
- b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
- OR
- c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
- d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
- Notice: d.) is helpful for troubleshooting
- 2b) Frontend module part:
- 1.) SkyStar DVB-S Revision 2.3:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
- 2.) SkyStar DVB-S Revision 2.6:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
- 3.) SkyStar DVB-S Revision 2.7:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
- c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
- d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
- 4.) SkyStar DVB-S Revision 2.8:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
- c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
- d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
- 5.) AirStar DVB-T card:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
- 6.) CableStar DVB-C card:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
- 7.) AirStar ATSC card 1st generation:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
- 8.) AirStar ATSC card 2nd generation:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
- c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
- 9.) AirStar ATSC card 3rd generation:
- a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
- b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
- c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
- Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
|
