ehci-orion.c 6.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302
  1. /*
  2. * drivers/usb/host/ehci-orion.c
  3. *
  4. * Tzachi Perelstein <tzachi@marvell.com>
  5. *
  6. * This file is licensed under the terms of the GNU General Public
  7. * License version 2. This program is licensed "as is" without any
  8. * warranty of any kind, whether express or implied.
  9. */
  10. #include <linux/kernel.h>
  11. #include <linux/module.h>
  12. #include <linux/platform_device.h>
  13. #include <linux/mbus.h>
  14. #include <asm/plat-orion/ehci-orion.h>
  15. #define rdl(off) __raw_readl(hcd->regs + (off))
  16. #define wrl(off, val) __raw_writel((val), hcd->regs + (off))
  17. #define USB_CMD 0x140
  18. #define USB_MODE 0x1a8
  19. #define USB_CAUSE 0x310
  20. #define USB_MASK 0x314
  21. #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
  22. #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
  23. #define USB_IPG 0x360
  24. #define USB_PHY_PWR_CTRL 0x400
  25. #define USB_PHY_TX_CTRL 0x420
  26. #define USB_PHY_RX_CTRL 0x430
  27. #define USB_PHY_IVREF_CTRL 0x440
  28. #define USB_PHY_TST_GRP_CTRL 0x450
  29. /*
  30. * Implement Orion USB controller specification guidelines
  31. */
  32. static void orion_usb_setup(struct usb_hcd *hcd)
  33. {
  34. /*
  35. * Clear interrupt cause and mask
  36. */
  37. wrl(USB_CAUSE, 0);
  38. wrl(USB_MASK, 0);
  39. /*
  40. * Reset controller
  41. */
  42. wrl(USB_CMD, rdl(USB_CMD) | 0x2);
  43. while (rdl(USB_CMD) & 0x2);
  44. /*
  45. * GL# USB-10: Set IPG for non start of frame packets
  46. * Bits[14:8]=0xc
  47. */
  48. wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
  49. /*
  50. * GL# USB-9: USB 2.0 Power Control
  51. * BG_VSEL[7:6]=0x1
  52. */
  53. wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
  54. /*
  55. * GL# USB-1: USB PHY Tx Control - force calibration to '8'
  56. * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
  57. */
  58. wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
  59. /*
  60. * GL# USB-3 GL# USB-9: USB PHY Rx Control
  61. * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
  62. * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
  63. */
  64. wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
  65. /*
  66. * GL# USB-3 GL# USB-9: USB PHY IVREF Control
  67. * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
  68. */
  69. wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
  70. /*
  71. * GL# USB-3 GL# USB-9: USB PHY Test Group Control
  72. * REG_FIFO_SQ_RST[15]=0
  73. */
  74. wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
  75. /*
  76. * Stop and reset controller
  77. */
  78. wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
  79. wrl(USB_CMD, rdl(USB_CMD) | 0x2);
  80. while (rdl(USB_CMD) & 0x2);
  81. /*
  82. * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
  83. * TBD: This need to be done after each reset!
  84. * GL# USB-4 Setup USB Host mode
  85. */
  86. wrl(USB_MODE, 0x13);
  87. }
  88. static int ehci_orion_setup(struct usb_hcd *hcd)
  89. {
  90. struct ehci_hcd *ehci = hcd_to_ehci(hcd);
  91. int retval;
  92. retval = ehci_halt(ehci);
  93. if (retval)
  94. return retval;
  95. /*
  96. * data structure init
  97. */
  98. retval = ehci_init(hcd);
  99. if (retval)
  100. return retval;
  101. hcd->has_tt = 1;
  102. ehci_reset(ehci);
  103. ehci_port_power(ehci, 0);
  104. return retval;
  105. }
  106. static const struct hc_driver ehci_orion_hc_driver = {
  107. .description = hcd_name,
  108. .product_desc = "Marvell Orion EHCI",
  109. .hcd_priv_size = sizeof(struct ehci_hcd),
  110. /*
  111. * generic hardware linkage
  112. */
  113. .irq = ehci_irq,
  114. .flags = HCD_MEMORY | HCD_USB2,
  115. /*
  116. * basic lifecycle operations
  117. */
  118. .reset = ehci_orion_setup,
  119. .start = ehci_run,
  120. .stop = ehci_stop,
  121. .shutdown = ehci_shutdown,
  122. /*
  123. * managing i/o requests and associated device resources
  124. */
  125. .urb_enqueue = ehci_urb_enqueue,
  126. .urb_dequeue = ehci_urb_dequeue,
  127. .endpoint_disable = ehci_endpoint_disable,
  128. /*
  129. * scheduling support
  130. */
  131. .get_frame_number = ehci_get_frame,
  132. /*
  133. * root hub support
  134. */
  135. .hub_status_data = ehci_hub_status_data,
  136. .hub_control = ehci_hub_control,
  137. .bus_suspend = ehci_bus_suspend,
  138. .bus_resume = ehci_bus_resume,
  139. .relinquish_port = ehci_relinquish_port,
  140. };
  141. static void __init
  142. ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
  143. struct mbus_dram_target_info *dram)
  144. {
  145. int i;
  146. for (i = 0; i < 4; i++) {
  147. wrl(USB_WINDOW_CTRL(i), 0);
  148. wrl(USB_WINDOW_BASE(i), 0);
  149. }
  150. for (i = 0; i < dram->num_cs; i++) {
  151. struct mbus_dram_window *cs = dram->cs + i;
  152. wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
  153. (cs->mbus_attr << 8) |
  154. (dram->mbus_dram_target_id << 4) | 1);
  155. wrl(USB_WINDOW_BASE(i), cs->base);
  156. }
  157. }
  158. static int __init ehci_orion_drv_probe(struct platform_device *pdev)
  159. {
  160. struct orion_ehci_data *pd = pdev->dev.platform_data;
  161. struct resource *res;
  162. struct usb_hcd *hcd;
  163. struct ehci_hcd *ehci;
  164. void __iomem *regs;
  165. int irq, err;
  166. if (usb_disabled())
  167. return -ENODEV;
  168. pr_debug("Initializing Orion-SoC USB Host Controller\n");
  169. irq = platform_get_irq(pdev, 0);
  170. if (irq <= 0) {
  171. dev_err(&pdev->dev,
  172. "Found HC with no IRQ. Check %s setup!\n",
  173. pdev->dev.bus_id);
  174. err = -ENODEV;
  175. goto err1;
  176. }
  177. res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  178. if (!res) {
  179. dev_err(&pdev->dev,
  180. "Found HC with no register addr. Check %s setup!\n",
  181. pdev->dev.bus_id);
  182. err = -ENODEV;
  183. goto err1;
  184. }
  185. if (!request_mem_region(res->start, res->end - res->start + 1,
  186. ehci_orion_hc_driver.description)) {
  187. dev_dbg(&pdev->dev, "controller already in use\n");
  188. err = -EBUSY;
  189. goto err1;
  190. }
  191. regs = ioremap(res->start, res->end - res->start + 1);
  192. if (regs == NULL) {
  193. dev_dbg(&pdev->dev, "error mapping memory\n");
  194. err = -EFAULT;
  195. goto err2;
  196. }
  197. hcd = usb_create_hcd(&ehci_orion_hc_driver,
  198. &pdev->dev, pdev->dev.bus_id);
  199. if (!hcd) {
  200. err = -ENOMEM;
  201. goto err3;
  202. }
  203. hcd->rsrc_start = res->start;
  204. hcd->rsrc_len = res->end - res->start + 1;
  205. hcd->regs = regs;
  206. ehci = hcd_to_ehci(hcd);
  207. ehci->caps = hcd->regs + 0x100;
  208. ehci->regs = hcd->regs + 0x100 +
  209. HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
  210. ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
  211. hcd->has_tt = 1;
  212. ehci->sbrn = 0x20;
  213. /*
  214. * (Re-)program MBUS remapping windows if we are asked to.
  215. */
  216. if (pd != NULL && pd->dram != NULL)
  217. ehci_orion_conf_mbus_windows(hcd, pd->dram);
  218. /*
  219. * setup Orion USB controller
  220. */
  221. orion_usb_setup(hcd);
  222. err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
  223. if (err)
  224. goto err4;
  225. return 0;
  226. err4:
  227. usb_put_hcd(hcd);
  228. err3:
  229. iounmap(regs);
  230. err2:
  231. release_mem_region(res->start, res->end - res->start + 1);
  232. err1:
  233. dev_err(&pdev->dev, "init %s fail, %d\n",
  234. pdev->dev.bus_id, err);
  235. return err;
  236. }
  237. static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
  238. {
  239. struct usb_hcd *hcd = platform_get_drvdata(pdev);
  240. usb_remove_hcd(hcd);
  241. iounmap(hcd->regs);
  242. release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  243. usb_put_hcd(hcd);
  244. return 0;
  245. }
  246. MODULE_ALIAS("platform:orion-ehci");
  247. static struct platform_driver ehci_orion_driver = {
  248. .probe = ehci_orion_drv_probe,
  249. .remove = __exit_p(ehci_orion_drv_remove),
  250. .shutdown = usb_hcd_platform_shutdown,
  251. .driver.name = "orion-ehci",
  252. };