tmp102.c 8.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293
  1. /* Texas Instruments TMP102 SMBus temperature sensor driver
  2. *
  3. * Copyright (C) 2010 Steven King <sfking@fdwdc.com>
  4. *
  5. * This program is free software; you can redistribute it and/or modify
  6. * it under the terms of the GNU General Public License as published by
  7. * the Free Software Foundation; either version 2 of the License, or
  8. * (at your option) any later version.
  9. *
  10. * This program is distributed in the hope that it will be useful,
  11. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13. * GNU General Public License for more details.
  14. *
  15. * You should have received a copy of the GNU General Public License
  16. * along with this program; if not, write to the Free Software
  17. * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
  18. */
  19. #include <linux/module.h>
  20. #include <linux/init.h>
  21. #include <linux/slab.h>
  22. #include <linux/i2c.h>
  23. #include <linux/hwmon.h>
  24. #include <linux/hwmon-sysfs.h>
  25. #include <linux/err.h>
  26. #include <linux/mutex.h>
  27. #include <linux/device.h>
  28. #define DRIVER_NAME "tmp102"
  29. #define TMP102_TEMP_REG 0x00
  30. #define TMP102_CONF_REG 0x01
  31. /* note: these bit definitions are byte swapped */
  32. #define TMP102_CONF_SD 0x0100
  33. #define TMP102_CONF_TM 0x0200
  34. #define TMP102_CONF_POL 0x0400
  35. #define TMP102_CONF_F0 0x0800
  36. #define TMP102_CONF_F1 0x1000
  37. #define TMP102_CONF_R0 0x2000
  38. #define TMP102_CONF_R1 0x4000
  39. #define TMP102_CONF_OS 0x8000
  40. #define TMP102_CONF_EM 0x0010
  41. #define TMP102_CONF_AL 0x0020
  42. #define TMP102_CONF_CR0 0x0040
  43. #define TMP102_CONF_CR1 0x0080
  44. #define TMP102_TLOW_REG 0x02
  45. #define TMP102_THIGH_REG 0x03
  46. struct tmp102 {
  47. struct device *hwmon_dev;
  48. struct mutex lock;
  49. u16 config_orig;
  50. unsigned long last_update;
  51. int temp[3];
  52. };
  53. /* convert left adjusted 13-bit TMP102 register value to milliCelsius */
  54. static inline int tmp102_reg_to_mC(s16 val)
  55. {
  56. return ((val & ~0x01) * 1000) / 128;
  57. }
  58. /* convert milliCelsius to left adjusted 13-bit TMP102 register value */
  59. static inline u16 tmp102_mC_to_reg(int val)
  60. {
  61. return (val * 128) / 1000;
  62. }
  63. static const u8 tmp102_reg[] = {
  64. TMP102_TEMP_REG,
  65. TMP102_TLOW_REG,
  66. TMP102_THIGH_REG,
  67. };
  68. static struct tmp102 *tmp102_update_device(struct i2c_client *client)
  69. {
  70. struct tmp102 *tmp102 = i2c_get_clientdata(client);
  71. mutex_lock(&tmp102->lock);
  72. if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
  73. int i;
  74. for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
  75. int status = i2c_smbus_read_word_swapped(client,
  76. tmp102_reg[i]);
  77. if (status > -1)
  78. tmp102->temp[i] = tmp102_reg_to_mC(status);
  79. }
  80. tmp102->last_update = jiffies;
  81. }
  82. mutex_unlock(&tmp102->lock);
  83. return tmp102;
  84. }
  85. static ssize_t tmp102_show_temp(struct device *dev,
  86. struct device_attribute *attr,
  87. char *buf)
  88. {
  89. struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
  90. struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev));
  91. return sprintf(buf, "%d\n", tmp102->temp[sda->index]);
  92. }
  93. static ssize_t tmp102_set_temp(struct device *dev,
  94. struct device_attribute *attr,
  95. const char *buf, size_t count)
  96. {
  97. struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
  98. struct i2c_client *client = to_i2c_client(dev);
  99. struct tmp102 *tmp102 = i2c_get_clientdata(client);
  100. long val;
  101. int status;
  102. if (kstrtol(buf, 10, &val) < 0)
  103. return -EINVAL;
  104. val = SENSORS_LIMIT(val, -256000, 255000);
  105. mutex_lock(&tmp102->lock);
  106. tmp102->temp[sda->index] = val;
  107. status = i2c_smbus_write_word_swapped(client, tmp102_reg[sda->index],
  108. tmp102_mC_to_reg(val));
  109. mutex_unlock(&tmp102->lock);
  110. return status ? : count;
  111. }
  112. static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0);
  113. static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp,
  114. tmp102_set_temp, 1);
  115. static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp,
  116. tmp102_set_temp, 2);
  117. static struct attribute *tmp102_attributes[] = {
  118. &sensor_dev_attr_temp1_input.dev_attr.attr,
  119. &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
  120. &sensor_dev_attr_temp1_max.dev_attr.attr,
  121. NULL
  122. };
  123. static const struct attribute_group tmp102_attr_group = {
  124. .attrs = tmp102_attributes,
  125. };
  126. #define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
  127. #define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
  128. static int __devinit tmp102_probe(struct i2c_client *client,
  129. const struct i2c_device_id *id)
  130. {
  131. struct tmp102 *tmp102;
  132. int status;
  133. if (!i2c_check_functionality(client->adapter,
  134. I2C_FUNC_SMBUS_WORD_DATA)) {
  135. dev_err(&client->dev, "adapter doesn't support SMBus word "
  136. "transactions\n");
  137. return -ENODEV;
  138. }
  139. tmp102 = devm_kzalloc(&client->dev, sizeof(*tmp102), GFP_KERNEL);
  140. if (!tmp102)
  141. return -ENOMEM;
  142. i2c_set_clientdata(client, tmp102);
  143. status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
  144. if (status < 0) {
  145. dev_err(&client->dev, "error reading config register\n");
  146. return status;
  147. }
  148. tmp102->config_orig = status;
  149. status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
  150. TMP102_CONFIG);
  151. if (status < 0) {
  152. dev_err(&client->dev, "error writing config register\n");
  153. goto fail_restore_config;
  154. }
  155. status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
  156. if (status < 0) {
  157. dev_err(&client->dev, "error reading config register\n");
  158. goto fail_restore_config;
  159. }
  160. status &= ~TMP102_CONFIG_RD_ONLY;
  161. if (status != TMP102_CONFIG) {
  162. dev_err(&client->dev, "config settings did not stick\n");
  163. status = -ENODEV;
  164. goto fail_restore_config;
  165. }
  166. tmp102->last_update = jiffies - HZ;
  167. mutex_init(&tmp102->lock);
  168. status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group);
  169. if (status) {
  170. dev_dbg(&client->dev, "could not create sysfs files\n");
  171. goto fail_restore_config;
  172. }
  173. tmp102->hwmon_dev = hwmon_device_register(&client->dev);
  174. if (IS_ERR(tmp102->hwmon_dev)) {
  175. dev_dbg(&client->dev, "unable to register hwmon device\n");
  176. status = PTR_ERR(tmp102->hwmon_dev);
  177. goto fail_remove_sysfs;
  178. }
  179. dev_info(&client->dev, "initialized\n");
  180. return 0;
  181. fail_remove_sysfs:
  182. sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
  183. fail_restore_config:
  184. i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
  185. tmp102->config_orig);
  186. return status;
  187. }
  188. static int __devexit tmp102_remove(struct i2c_client *client)
  189. {
  190. struct tmp102 *tmp102 = i2c_get_clientdata(client);
  191. hwmon_device_unregister(tmp102->hwmon_dev);
  192. sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
  193. /* Stop monitoring if device was stopped originally */
  194. if (tmp102->config_orig & TMP102_CONF_SD) {
  195. int config;
  196. config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
  197. if (config >= 0)
  198. i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
  199. config | TMP102_CONF_SD);
  200. }
  201. return 0;
  202. }
  203. #ifdef CONFIG_PM
  204. static int tmp102_suspend(struct device *dev)
  205. {
  206. struct i2c_client *client = to_i2c_client(dev);
  207. int config;
  208. config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
  209. if (config < 0)
  210. return config;
  211. config |= TMP102_CONF_SD;
  212. return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
  213. }
  214. static int tmp102_resume(struct device *dev)
  215. {
  216. struct i2c_client *client = to_i2c_client(dev);
  217. int config;
  218. config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
  219. if (config < 0)
  220. return config;
  221. config &= ~TMP102_CONF_SD;
  222. return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
  223. }
  224. static const struct dev_pm_ops tmp102_dev_pm_ops = {
  225. .suspend = tmp102_suspend,
  226. .resume = tmp102_resume,
  227. };
  228. #define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
  229. #else
  230. #define TMP102_DEV_PM_OPS NULL
  231. #endif /* CONFIG_PM */
  232. static const struct i2c_device_id tmp102_id[] = {
  233. { "tmp102", 0 },
  234. { }
  235. };
  236. MODULE_DEVICE_TABLE(i2c, tmp102_id);
  237. static struct i2c_driver tmp102_driver = {
  238. .driver.name = DRIVER_NAME,
  239. .driver.pm = TMP102_DEV_PM_OPS,
  240. .probe = tmp102_probe,
  241. .remove = __devexit_p(tmp102_remove),
  242. .id_table = tmp102_id,
  243. };
  244. module_i2c_driver(tmp102_driver);
  245. MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
  246. MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver");
  247. MODULE_LICENSE("GPL");