gpio-mxs.c 8.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324
  1. /*
  2. * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
  3. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  4. *
  5. * Based on code from Freescale,
  6. * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License
  10. * as published by the Free Software Foundation; either version 2
  11. * of the License, or (at your option) any later version.
  12. * This program is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15. * GNU General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software
  19. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  20. * MA 02110-1301, USA.
  21. */
  22. #include <linux/init.h>
  23. #include <linux/interrupt.h>
  24. #include <linux/io.h>
  25. #include <linux/irq.h>
  26. #include <linux/gpio.h>
  27. #include <linux/of.h>
  28. #include <linux/of_address.h>
  29. #include <linux/of_device.h>
  30. #include <linux/platform_device.h>
  31. #include <linux/slab.h>
  32. #include <linux/basic_mmio_gpio.h>
  33. #include <linux/module.h>
  34. #define MXS_SET 0x4
  35. #define MXS_CLR 0x8
  36. #define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10)
  37. #define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10)
  38. #define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10)
  39. #define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10)
  40. #define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10)
  41. #define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10)
  42. #define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10)
  43. #define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10)
  44. #define GPIO_INT_FALL_EDGE 0x0
  45. #define GPIO_INT_LOW_LEV 0x1
  46. #define GPIO_INT_RISE_EDGE 0x2
  47. #define GPIO_INT_HIGH_LEV 0x3
  48. #define GPIO_INT_LEV_MASK (1 << 0)
  49. #define GPIO_INT_POL_MASK (1 << 1)
  50. #define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
  51. enum mxs_gpio_id {
  52. IMX23_GPIO,
  53. IMX28_GPIO,
  54. };
  55. struct mxs_gpio_port {
  56. void __iomem *base;
  57. int id;
  58. int irq;
  59. int virtual_irq_start;
  60. struct bgpio_chip bgc;
  61. enum mxs_gpio_id devid;
  62. };
  63. static inline int is_imx23_gpio(struct mxs_gpio_port *port)
  64. {
  65. return port->devid == IMX23_GPIO;
  66. }
  67. static inline int is_imx28_gpio(struct mxs_gpio_port *port)
  68. {
  69. return port->devid == IMX28_GPIO;
  70. }
  71. /* Note: This driver assumes 32 GPIOs are handled in one register */
  72. static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
  73. {
  74. u32 gpio = irq_to_gpio(d->irq);
  75. u32 pin_mask = 1 << (gpio & 31);
  76. struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
  77. struct mxs_gpio_port *port = gc->private;
  78. void __iomem *pin_addr;
  79. int edge;
  80. switch (type) {
  81. case IRQ_TYPE_EDGE_RISING:
  82. edge = GPIO_INT_RISE_EDGE;
  83. break;
  84. case IRQ_TYPE_EDGE_FALLING:
  85. edge = GPIO_INT_FALL_EDGE;
  86. break;
  87. case IRQ_TYPE_LEVEL_LOW:
  88. edge = GPIO_INT_LOW_LEV;
  89. break;
  90. case IRQ_TYPE_LEVEL_HIGH:
  91. edge = GPIO_INT_HIGH_LEV;
  92. break;
  93. default:
  94. return -EINVAL;
  95. }
  96. /* set level or edge */
  97. pin_addr = port->base + PINCTRL_IRQLEV(port);
  98. if (edge & GPIO_INT_LEV_MASK)
  99. writel(pin_mask, pin_addr + MXS_SET);
  100. else
  101. writel(pin_mask, pin_addr + MXS_CLR);
  102. /* set polarity */
  103. pin_addr = port->base + PINCTRL_IRQPOL(port);
  104. if (edge & GPIO_INT_POL_MASK)
  105. writel(pin_mask, pin_addr + MXS_SET);
  106. else
  107. writel(pin_mask, pin_addr + MXS_CLR);
  108. writel(1 << (gpio & 0x1f),
  109. port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
  110. return 0;
  111. }
  112. /* MXS has one interrupt *per* gpio port */
  113. static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
  114. {
  115. u32 irq_stat;
  116. struct mxs_gpio_port *port = irq_get_handler_data(irq);
  117. u32 gpio_irq_no_base = port->virtual_irq_start;
  118. desc->irq_data.chip->irq_ack(&desc->irq_data);
  119. irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) &
  120. readl(port->base + PINCTRL_IRQEN(port));
  121. while (irq_stat != 0) {
  122. int irqoffset = fls(irq_stat) - 1;
  123. generic_handle_irq(gpio_irq_no_base + irqoffset);
  124. irq_stat &= ~(1 << irqoffset);
  125. }
  126. }
  127. /*
  128. * Set interrupt number "irq" in the GPIO as a wake-up source.
  129. * While system is running, all registered GPIO interrupts need to have
  130. * wake-up enabled. When system is suspended, only selected GPIO interrupts
  131. * need to have wake-up enabled.
  132. * @param irq interrupt source number
  133. * @param enable enable as wake-up if equal to non-zero
  134. * @return This function returns 0 on success.
  135. */
  136. static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
  137. {
  138. struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
  139. struct mxs_gpio_port *port = gc->private;
  140. if (enable)
  141. enable_irq_wake(port->irq);
  142. else
  143. disable_irq_wake(port->irq);
  144. return 0;
  145. }
  146. static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port)
  147. {
  148. struct irq_chip_generic *gc;
  149. struct irq_chip_type *ct;
  150. gc = irq_alloc_generic_chip("gpio-mxs", 1, port->virtual_irq_start,
  151. port->base, handle_level_irq);
  152. gc->private = port;
  153. ct = gc->chip_types;
  154. ct->chip.irq_ack = irq_gc_ack_set_bit;
  155. ct->chip.irq_mask = irq_gc_mask_clr_bit;
  156. ct->chip.irq_unmask = irq_gc_mask_set_bit;
  157. ct->chip.irq_set_type = mxs_gpio_set_irq_type;
  158. ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
  159. ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
  160. ct->regs.mask = PINCTRL_IRQEN(port);
  161. irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
  162. }
  163. static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
  164. {
  165. struct bgpio_chip *bgc = to_bgpio_chip(gc);
  166. struct mxs_gpio_port *port =
  167. container_of(bgc, struct mxs_gpio_port, bgc);
  168. return port->virtual_irq_start + offset;
  169. }
  170. static struct platform_device_id mxs_gpio_ids[] = {
  171. {
  172. .name = "imx23-gpio",
  173. .driver_data = IMX23_GPIO,
  174. }, {
  175. .name = "imx28-gpio",
  176. .driver_data = IMX28_GPIO,
  177. }, {
  178. /* sentinel */
  179. }
  180. };
  181. MODULE_DEVICE_TABLE(platform, mxs_gpio_ids);
  182. static const struct of_device_id mxs_gpio_dt_ids[] = {
  183. { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
  184. { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
  185. { /* sentinel */ }
  186. };
  187. MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
  188. static int __devinit mxs_gpio_probe(struct platform_device *pdev)
  189. {
  190. const struct of_device_id *of_id =
  191. of_match_device(mxs_gpio_dt_ids, &pdev->dev);
  192. struct device_node *np = pdev->dev.of_node;
  193. struct device_node *parent;
  194. static void __iomem *base;
  195. struct mxs_gpio_port *port;
  196. struct resource *iores = NULL;
  197. int err;
  198. port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
  199. if (!port)
  200. return -ENOMEM;
  201. if (np) {
  202. port->id = of_alias_get_id(np, "gpio");
  203. if (port->id < 0)
  204. return port->id;
  205. port->devid = (enum mxs_gpio_id) of_id->data;
  206. } else {
  207. port->id = pdev->id;
  208. port->devid = pdev->id_entry->driver_data;
  209. }
  210. port->virtual_irq_start = MXS_GPIO_IRQ_START + port->id * 32;
  211. port->irq = platform_get_irq(pdev, 0);
  212. if (port->irq < 0)
  213. return port->irq;
  214. /*
  215. * map memory region only once, as all the gpio ports
  216. * share the same one
  217. */
  218. if (!base) {
  219. if (np) {
  220. parent = of_get_parent(np);
  221. base = of_iomap(parent, 0);
  222. of_node_put(parent);
  223. } else {
  224. iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  225. base = devm_request_and_ioremap(&pdev->dev, iores);
  226. }
  227. if (!base)
  228. return -EADDRNOTAVAIL;
  229. }
  230. port->base = base;
  231. /*
  232. * select the pin interrupt functionality but initially
  233. * disable the interrupts
  234. */
  235. writel(~0U, port->base + PINCTRL_PIN2IRQ(port));
  236. writel(0, port->base + PINCTRL_IRQEN(port));
  237. /* clear address has to be used to clear IRQSTAT bits */
  238. writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
  239. /* gpio-mxs can be a generic irq chip */
  240. mxs_gpio_init_gc(port);
  241. /* setup one handler for each entry */
  242. irq_set_chained_handler(port->irq, mxs_gpio_irq_handler);
  243. irq_set_handler_data(port->irq, port);
  244. err = bgpio_init(&port->bgc, &pdev->dev, 4,
  245. port->base + PINCTRL_DIN(port),
  246. port->base + PINCTRL_DOUT(port), NULL,
  247. port->base + PINCTRL_DOE(port), NULL, 0);
  248. if (err)
  249. return err;
  250. port->bgc.gc.to_irq = mxs_gpio_to_irq;
  251. port->bgc.gc.base = port->id * 32;
  252. err = gpiochip_add(&port->bgc.gc);
  253. if (err) {
  254. bgpio_remove(&port->bgc);
  255. return err;
  256. }
  257. return 0;
  258. }
  259. static struct platform_driver mxs_gpio_driver = {
  260. .driver = {
  261. .name = "gpio-mxs",
  262. .owner = THIS_MODULE,
  263. .of_match_table = mxs_gpio_dt_ids,
  264. },
  265. .probe = mxs_gpio_probe,
  266. .id_table = mxs_gpio_ids,
  267. };
  268. static int __init mxs_gpio_init(void)
  269. {
  270. return platform_driver_register(&mxs_gpio_driver);
  271. }
  272. postcore_initcall(mxs_gpio_init);
  273. MODULE_AUTHOR("Freescale Semiconductor, "
  274. "Daniel Mack <danielncaiaq.de>, "
  275. "Juergen Beisert <kernel@pengutronix.de>");
  276. MODULE_DESCRIPTION("Freescale MXS GPIO");
  277. MODULE_LICENSE("GPL");