| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165 |
- #
- # Multifunction miscellaneous devices
- #
- menu "Multifunction device drivers"
- depends on HAS_IOMEM
- config MFD_CORE
- tristate
- default n
- config MFD_SM501
- tristate "Support for Silicon Motion SM501"
- ---help---
- This is the core driver for the Silicon Motion SM501 multimedia
- companion chip. This device is a multifunction device which may
- provide numerous interfaces including USB host controller, USB gadget,
- asynchronous serial ports, audio functions, and a dual display video
- interface. The device may be connected by PCI or local bus with
- varying functions enabled.
- config MFD_SM501_GPIO
- bool "Export GPIO via GPIO layer"
- depends on MFD_SM501 && GPIOLIB
- ---help---
- This option uses the gpio library layer to export the 64 GPIO
- lines on the SM501. The platform data is used to supply the
- base number for the first GPIO line to register.
- config MFD_ASIC3
- bool "Support for Compaq ASIC3"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
- ---help---
- This driver supports the ASIC3 multifunction chip found on many
- PDAs (mainly iPAQ and HTC based ones)
- config HTC_EGPIO
- bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
- help
- This driver supports the CPLD egpio chip present on
- several HTC phones. It provides basic support for input
- pins, output pins, and irqs.
- config HTC_PASIC3
- tristate "HTC PASIC3 LED/DS1WM chip support"
- help
- This core driver provides register access for the LED/DS1WM
- chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
- HTC Magician devices, respectively. Actual functionality is
- handled by the leds-pasic3 and ds1wm drivers.
- config UCB1400_CORE
- tristate "Philips UCB1400 Core driver"
- help
- This enables support for the Philips UCB1400 core functions.
- The UCB1400 is an AC97 audio codec.
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_core.
- config TWL4030_CORE
- bool "Texas Instruments TWL4030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
- help
- Say yes here if you have TWL4030 family chip on your board.
- This core driver provides register access and IRQ handling
- facilities, and registers devices for the various functions
- so that function-specific drivers can bind to them.
- These multi-function chips are found on many OMAP2 and OMAP3
- boards, providing power management, RTC, GPIO, keypad, a
- high speed USB OTG transceiver, an audio codec (on most
- versions) and many other features.
- config MFD_TMIO
- bool
- default n
- config MFD_T7L66XB
- bool "Support Toshiba T7L66XB"
- depends on ARM
- select MFD_CORE
- select MFD_TMIO
- help
- Support for Toshiba Mobile IO Controller T7L66XB
- config MFD_TC6387XB
- bool "Support Toshiba TC6387XB"
- depends on ARM
- select MFD_CORE
- select MFD_TMIO
- help
- Support for Toshiba Mobile IO Controller TC6387XB
- config MFD_TC6393XB
- bool "Support Toshiba TC6393XB"
- depends on GPIOLIB && ARM
- select MFD_CORE
- select MFD_TMIO
- help
- Support for Toshiba Mobile IO Controller TC6393XB
- config MFD_WM8400
- tristate "Support Wolfson Microelectronics WM8400"
- help
- Support for the Wolfson Microelecronics WM8400 PMIC and audio
- CODEC. This driver adds provides common support for accessing
- the device, additional drivers must be enabled in order to use
- the functionality of the device.
- config MFD_WM8350
- tristate
- config MFD_WM8350_CONFIG_MODE_0
- bool
- depends on MFD_WM8350
- config MFD_WM8350_CONFIG_MODE_1
- bool
- depends on MFD_WM8350
- config MFD_WM8350_CONFIG_MODE_2
- bool
- depends on MFD_WM8350
- config MFD_WM8350_CONFIG_MODE_3
- bool
- depends on MFD_WM8350
- config MFD_WM8350_I2C
- tristate "Support Wolfson Microelectronics WM8350 with I2C"
- select MFD_WM8350
- depends on I2C
- help
- The WM8350 is an integrated audio and power management
- subsystem with watchdog and RTC functionality for embedded
- systems. This option enables core support for the WM8350 with
- I2C as the control interface. Additional options must be
- selected to enable support for the functionality of the chip.
- endmenu
- menu "Multimedia Capabilities Port drivers"
- depends on ARCH_SA1100
- config MCP
- tristate
- # Interface drivers
- config MCP_SA11X0
- tristate "Support SA11x0 MCP interface"
- depends on ARCH_SA1100
- select MCP
- # Chip drivers
- config MCP_UCB1200
- tristate "Support for UCB1200 / UCB1300"
- depends on MCP
- config MCP_UCB1200_TS
- tristate "Touchscreen interface support"
- depends on MCP_UCB1200 && INPUT
- endmenu
|
