| 1234567891011121314151617181920212223242526272829303132333435363738394041424344 |
- #ifndef __PLAT_PXA_GPIO_H
- #define __PLAT_PXA_GPIO_H
- struct irq_data;
- /*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- * GPLR GPDR GPSR GPCR GRER GFER GEDR
- * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
- * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
- * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
- *
- * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
- * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
- * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
- *
- * NOTE:
- * BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
- */
- #define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
- #define GPLR_OFFSET 0x00
- #define GPDR_OFFSET 0x0C
- #define GPSR_OFFSET 0x18
- #define GPCR_OFFSET 0x24
- #define GRER_OFFSET 0x30
- #define GFER_OFFSET 0x3C
- #define GEDR_OFFSET 0x48
- /* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
- extern int pxa_last_gpio;
- typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
- extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
- #endif /* __PLAT_PXA_GPIO_H */
|
