| 1234567891011121314151617181920212223242526272829303132333435363738 |
- General note on [U]EFI x86_64 support
- -------------------------------------
- The nomenclature EFI and UEFI are used interchangeably in this document.
- Although the tools below are _not_ needed for building the kernel,
- the needed bootloader support and associated tools for x86_64 platforms
- with EFI firmware and specifications are listed below.
- 1. UEFI specification: http://www.uefi.org
- 2. Booting Linux kernel on UEFI x86_64 platform requires bootloader
- support. Elilo with x86_64 support can be used.
- 3. x86_64 platform with EFI/UEFI firmware.
- Mechanics:
- ---------
- - Build the kernel with the following configuration.
- CONFIG_FB_EFI=y
- CONFIG_FRAMEBUFFER_CONSOLE=y
- If EFI runtime services are expected, the following configuration should
- be selected.
- CONFIG_EFI=y
- CONFIG_EFI_VARS=y or m # optional
- - Create a VFAT partition on the disk
- - Copy the following to the VFAT partition:
- elilo bootloader with x86_64 support, elilo configuration file,
- kernel image built in first step and corresponding
- initrd. Instructions on building elilo and its dependencies
- can be found in the elilo sourceforge project.
- - Boot to EFI shell and invoke elilo choosing the kernel image built
- in first step.
- - If some or all EFI runtime services don't work, you can try following
- kernel command line parameters to turn off some or all EFI runtime
- services.
- noefi turn off all EFI runtime services
- reboot_type=k turn off EFI reboot runtime service
|
