Kconfig 75 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126
  1. #
  2. # File system configuration
  3. #
  4. menu "File systems"
  5. if BLOCK
  6. config EXT2_FS
  7. tristate "Second extended fs support"
  8. help
  9. Ext2 is a standard Linux file system for hard disks.
  10. To compile this file system support as a module, choose M here: the
  11. module will be called ext2.
  12. If unsure, say Y.
  13. config EXT2_FS_XATTR
  14. bool "Ext2 extended attributes"
  15. depends on EXT2_FS
  16. help
  17. Extended attributes are name:value pairs associated with inodes by
  18. the kernel or by users (see the attr(5) manual page, or visit
  19. <http://acl.bestbits.at/> for details).
  20. If unsure, say N.
  21. config EXT2_FS_POSIX_ACL
  22. bool "Ext2 POSIX Access Control Lists"
  23. depends on EXT2_FS_XATTR
  24. select FS_POSIX_ACL
  25. help
  26. Posix Access Control Lists (ACLs) support permissions for users and
  27. groups beyond the owner/group/world scheme.
  28. To learn more about Access Control Lists, visit the Posix ACLs for
  29. Linux website <http://acl.bestbits.at/>.
  30. If you don't know what Access Control Lists are, say N
  31. config EXT2_FS_SECURITY
  32. bool "Ext2 Security Labels"
  33. depends on EXT2_FS_XATTR
  34. help
  35. Security labels support alternative access control models
  36. implemented by security modules like SELinux. This option
  37. enables an extended attribute handler for file security
  38. labels in the ext2 filesystem.
  39. If you are not using a security module that requires using
  40. extended attributes for file security labels, say N.
  41. config EXT2_FS_XIP
  42. bool "Ext2 execute in place support"
  43. depends on EXT2_FS && MMU
  44. help
  45. Execute in place can be used on memory-backed block devices. If you
  46. enable this option, you can select to mount block devices which are
  47. capable of this feature without using the page cache.
  48. If you do not use a block device that is capable of using this,
  49. or if unsure, say N.
  50. config FS_XIP
  51. # execute in place
  52. bool
  53. depends on EXT2_FS_XIP
  54. default y
  55. config EXT3_FS
  56. tristate "Ext3 journalling file system support"
  57. select JBD
  58. help
  59. This is the journalling version of the Second extended file system
  60. (often called ext3), the de facto standard Linux file system
  61. (method to organize files on a storage device) for hard disks.
  62. The journalling code included in this driver means you do not have
  63. to run e2fsck (file system checker) on your file systems after a
  64. crash. The journal keeps track of any changes that were being made
  65. at the time the system crashed, and can ensure that your file system
  66. is consistent without the need for a lengthy check.
  67. Other than adding the journal to the file system, the on-disk format
  68. of ext3 is identical to ext2. It is possible to freely switch
  69. between using the ext3 driver and the ext2 driver, as long as the
  70. file system has been cleanly unmounted, or e2fsck is run on the file
  71. system.
  72. To add a journal on an existing ext2 file system or change the
  73. behavior of ext3 file systems, you can use the tune2fs utility ("man
  74. tune2fs"). To modify attributes of files and directories on ext3
  75. file systems, use chattr ("man chattr"). You need to be using
  76. e2fsprogs version 1.20 or later in order to create ext3 journals
  77. (available at <http://sourceforge.net/projects/e2fsprogs/>).
  78. To compile this file system support as a module, choose M here: the
  79. module will be called ext3.
  80. config EXT3_FS_XATTR
  81. bool "Ext3 extended attributes"
  82. depends on EXT3_FS
  83. default y
  84. help
  85. Extended attributes are name:value pairs associated with inodes by
  86. the kernel or by users (see the attr(5) manual page, or visit
  87. <http://acl.bestbits.at/> for details).
  88. If unsure, say N.
  89. You need this for POSIX ACL support on ext3.
  90. config EXT3_FS_POSIX_ACL
  91. bool "Ext3 POSIX Access Control Lists"
  92. depends on EXT3_FS_XATTR
  93. select FS_POSIX_ACL
  94. help
  95. Posix Access Control Lists (ACLs) support permissions for users and
  96. groups beyond the owner/group/world scheme.
  97. To learn more about Access Control Lists, visit the Posix ACLs for
  98. Linux website <http://acl.bestbits.at/>.
  99. If you don't know what Access Control Lists are, say N
  100. config EXT3_FS_SECURITY
  101. bool "Ext3 Security Labels"
  102. depends on EXT3_FS_XATTR
  103. help
  104. Security labels support alternative access control models
  105. implemented by security modules like SELinux. This option
  106. enables an extended attribute handler for file security
  107. labels in the ext3 filesystem.
  108. If you are not using a security module that requires using
  109. extended attributes for file security labels, say N.
  110. config EXT4DEV_FS
  111. tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
  112. depends on EXPERIMENTAL
  113. select JBD2
  114. select CRC16
  115. help
  116. Ext4dev is a predecessor filesystem of the next generation
  117. extended fs ext4, based on ext3 filesystem code. It will be
  118. renamed ext4 fs later, once ext4dev is mature and stabilized.
  119. Unlike the change from ext2 filesystem to ext3 filesystem,
  120. the on-disk format of ext4dev is not the same as ext3 any more:
  121. it is based on extent maps and it supports 48-bit physical block
  122. numbers. These combined on-disk format changes will allow
  123. ext4dev/ext4 to handle more than 16 TB filesystem volumes --
  124. a hard limit that ext3 cannot overcome without changing the
  125. on-disk format.
  126. Other than extent maps and 48-bit block numbers, ext4dev also is
  127. likely to have other new features such as persistent preallocation,
  128. high resolution time stamps, and larger file support etc. These
  129. features will be added to ext4dev gradually.
  130. To compile this file system support as a module, choose M here. The
  131. module will be called ext4dev.
  132. If unsure, say N.
  133. config EXT4DEV_FS_XATTR
  134. bool "Ext4dev extended attributes"
  135. depends on EXT4DEV_FS
  136. default y
  137. help
  138. Extended attributes are name:value pairs associated with inodes by
  139. the kernel or by users (see the attr(5) manual page, or visit
  140. <http://acl.bestbits.at/> for details).
  141. If unsure, say N.
  142. You need this for POSIX ACL support on ext4dev/ext4.
  143. config EXT4DEV_FS_POSIX_ACL
  144. bool "Ext4dev POSIX Access Control Lists"
  145. depends on EXT4DEV_FS_XATTR
  146. select FS_POSIX_ACL
  147. help
  148. POSIX Access Control Lists (ACLs) support permissions for users and
  149. groups beyond the owner/group/world scheme.
  150. To learn more about Access Control Lists, visit the POSIX ACLs for
  151. Linux website <http://acl.bestbits.at/>.
  152. If you don't know what Access Control Lists are, say N
  153. config EXT4DEV_FS_SECURITY
  154. bool "Ext4dev Security Labels"
  155. depends on EXT4DEV_FS_XATTR
  156. help
  157. Security labels support alternative access control models
  158. implemented by security modules like SELinux. This option
  159. enables an extended attribute handler for file security
  160. labels in the ext4dev/ext4 filesystem.
  161. If you are not using a security module that requires using
  162. extended attributes for file security labels, say N.
  163. config JBD
  164. tristate
  165. help
  166. This is a generic journalling layer for block devices. It is
  167. currently used by the ext3 and OCFS2 file systems, but it could
  168. also be used to add journal support to other file systems or block
  169. devices such as RAID or LVM.
  170. If you are using the ext3 or OCFS2 file systems, you need to
  171. say Y here. If you are not using ext3 OCFS2 then you will probably
  172. want to say N.
  173. To compile this device as a module, choose M here: the module will be
  174. called jbd. If you are compiling ext3 or OCFS2 into the kernel,
  175. you cannot compile this code as a module.
  176. config JBD_DEBUG
  177. bool "JBD (ext3) debugging support"
  178. depends on JBD && DEBUG_FS
  179. help
  180. If you are using the ext3 journaled file system (or potentially any
  181. other file system/device using JBD), this option allows you to
  182. enable debugging output while the system is running, in order to
  183. help track down any problems you are having. By default the
  184. debugging output will be turned off.
  185. If you select Y here, then you will be able to turn on debugging
  186. with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a
  187. number between 1 and 5, the higher the number, the more debugging
  188. output is generated. To turn debugging off again, do
  189. "echo 0 > /sys/kernel/debug/jbd/jbd-debug".
  190. config JBD2
  191. tristate
  192. select CRC32
  193. help
  194. This is a generic journaling layer for block devices that support
  195. both 32-bit and 64-bit block numbers. It is currently used by
  196. the ext4dev/ext4 filesystem, but it could also be used to add
  197. journal support to other file systems or block devices such
  198. as RAID or LVM.
  199. If you are using ext4dev/ext4, you need to say Y here. If you are not
  200. using ext4dev/ext4 then you will probably want to say N.
  201. To compile this device as a module, choose M here. The module will be
  202. called jbd2. If you are compiling ext4dev/ext4 into the kernel,
  203. you cannot compile this code as a module.
  204. config JBD2_DEBUG
  205. bool "JBD2 (ext4dev/ext4) debugging support"
  206. depends on JBD2 && DEBUG_FS
  207. help
  208. If you are using the ext4dev/ext4 journaled file system (or
  209. potentially any other filesystem/device using JBD2), this option
  210. allows you to enable debugging output while the system is running,
  211. in order to help track down any problems you are having.
  212. By default, the debugging output will be turned off.
  213. If you select Y here, then you will be able to turn on debugging
  214. with "echo N > /sys/kernel/debug/jbd2/jbd2-debug", where N is a
  215. number between 1 and 5. The higher the number, the more debugging
  216. output is generated. To turn debugging off again, do
  217. "echo 0 > /sys/kernel/debug/jbd2/jbd2-debug".
  218. config FS_MBCACHE
  219. # Meta block cache for Extended Attributes (ext2/ext3/ext4)
  220. tristate
  221. depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
  222. default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
  223. default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
  224. config REISERFS_FS
  225. tristate "Reiserfs support"
  226. help
  227. Stores not just filenames but the files themselves in a balanced
  228. tree. Uses journalling.
  229. Balanced trees are more efficient than traditional file system
  230. architectural foundations.
  231. In general, ReiserFS is as fast as ext2, but is very efficient with
  232. large directories and small files. Additional patches are needed
  233. for NFS and quotas, please see <http://www.namesys.com/> for links.
  234. It is more easily extended to have features currently found in
  235. database and keyword search systems than block allocation based file
  236. systems are. The next version will be so extended, and will support
  237. plugins consistent with our motto ``It takes more than a license to
  238. make source code open.''
  239. Read <http://www.namesys.com/> to learn more about reiserfs.
  240. Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
  241. If you like it, you can pay us to add new features to it that you
  242. need, buy a support contract, or pay us to port it to another OS.
  243. config REISERFS_CHECK
  244. bool "Enable reiserfs debug mode"
  245. depends on REISERFS_FS
  246. help
  247. If you set this to Y, then ReiserFS will perform every check it can
  248. possibly imagine of its internal consistency throughout its
  249. operation. It will also go substantially slower. More than once we
  250. have forgotten that this was on, and then gone despondent over the
  251. latest benchmarks.:-) Use of this option allows our team to go all
  252. out in checking for consistency when debugging without fear of its
  253. effect on end users. If you are on the verge of sending in a bug
  254. report, say Y and you might get a useful error message. Almost
  255. everyone should say N.
  256. config REISERFS_PROC_INFO
  257. bool "Stats in /proc/fs/reiserfs"
  258. depends on REISERFS_FS && PROC_FS
  259. help
  260. Create under /proc/fs/reiserfs a hierarchy of files, displaying
  261. various ReiserFS statistics and internal data at the expense of
  262. making your kernel or module slightly larger (+8 KB). This also
  263. increases the amount of kernel memory required for each mount.
  264. Almost everyone but ReiserFS developers and people fine-tuning
  265. reiserfs or tracing problems should say N.
  266. config REISERFS_FS_XATTR
  267. bool "ReiserFS extended attributes"
  268. depends on REISERFS_FS
  269. help
  270. Extended attributes are name:value pairs associated with inodes by
  271. the kernel or by users (see the attr(5) manual page, or visit
  272. <http://acl.bestbits.at/> for details).
  273. If unsure, say N.
  274. config REISERFS_FS_POSIX_ACL
  275. bool "ReiserFS POSIX Access Control Lists"
  276. depends on REISERFS_FS_XATTR
  277. select FS_POSIX_ACL
  278. help
  279. Posix Access Control Lists (ACLs) support permissions for users and
  280. groups beyond the owner/group/world scheme.
  281. To learn more about Access Control Lists, visit the Posix ACLs for
  282. Linux website <http://acl.bestbits.at/>.
  283. If you don't know what Access Control Lists are, say N
  284. config REISERFS_FS_SECURITY
  285. bool "ReiserFS Security Labels"
  286. depends on REISERFS_FS_XATTR
  287. help
  288. Security labels support alternative access control models
  289. implemented by security modules like SELinux. This option
  290. enables an extended attribute handler for file security
  291. labels in the ReiserFS filesystem.
  292. If you are not using a security module that requires using
  293. extended attributes for file security labels, say N.
  294. config JFS_FS
  295. tristate "JFS filesystem support"
  296. select NLS
  297. help
  298. This is a port of IBM's Journaled Filesystem . More information is
  299. available in the file <file:Documentation/filesystems/jfs.txt>.
  300. If you do not intend to use the JFS filesystem, say N.
  301. config JFS_POSIX_ACL
  302. bool "JFS POSIX Access Control Lists"
  303. depends on JFS_FS
  304. select FS_POSIX_ACL
  305. help
  306. Posix Access Control Lists (ACLs) support permissions for users and
  307. groups beyond the owner/group/world scheme.
  308. To learn more about Access Control Lists, visit the Posix ACLs for
  309. Linux website <http://acl.bestbits.at/>.
  310. If you don't know what Access Control Lists are, say N
  311. config JFS_SECURITY
  312. bool "JFS Security Labels"
  313. depends on JFS_FS
  314. help
  315. Security labels support alternative access control models
  316. implemented by security modules like SELinux. This option
  317. enables an extended attribute handler for file security
  318. labels in the jfs filesystem.
  319. If you are not using a security module that requires using
  320. extended attributes for file security labels, say N.
  321. config JFS_DEBUG
  322. bool "JFS debugging"
  323. depends on JFS_FS
  324. help
  325. If you are experiencing any problems with the JFS filesystem, say
  326. Y here. This will result in additional debugging messages to be
  327. written to the system log. Under normal circumstances, this
  328. results in very little overhead.
  329. config JFS_STATISTICS
  330. bool "JFS statistics"
  331. depends on JFS_FS
  332. help
  333. Enabling this option will cause statistics from the JFS file system
  334. to be made available to the user in the /proc/fs/jfs/ directory.
  335. config FS_POSIX_ACL
  336. # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
  337. #
  338. # NOTE: you can implement Posix ACLs without these helpers (XFS does).
  339. # Never use this symbol for ifdefs.
  340. #
  341. bool
  342. default n
  343. config FILE_LOCKING
  344. bool "Enable POSIX file locking API" if EMBEDDED
  345. default y
  346. help
  347. This option enables standard file locking support, required
  348. for filesystems like NFS and for the flock() system
  349. call. Disabling this option saves about 11k.
  350. source "fs/xfs/Kconfig"
  351. source "fs/gfs2/Kconfig"
  352. config OCFS2_FS
  353. tristate "OCFS2 file system support"
  354. depends on NET && SYSFS
  355. select CONFIGFS_FS
  356. select JBD
  357. select CRC32
  358. help
  359. OCFS2 is a general purpose extent based shared disk cluster file
  360. system with many similarities to ext3. It supports 64 bit inode
  361. numbers, and has automatically extending metadata groups which may
  362. also make it attractive for non-clustered use.
  363. You'll want to install the ocfs2-tools package in order to at least
  364. get "mount.ocfs2".
  365. Project web page: http://oss.oracle.com/projects/ocfs2
  366. Tools web page: http://oss.oracle.com/projects/ocfs2-tools
  367. OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
  368. For more information on OCFS2, see the file
  369. <file:Documentation/filesystems/ocfs2.txt>.
  370. config OCFS2_FS_O2CB
  371. tristate "O2CB Kernelspace Clustering"
  372. depends on OCFS2_FS
  373. default y
  374. help
  375. OCFS2 includes a simple kernelspace clustering package, the OCFS2
  376. Cluster Base. It only requires a very small userspace component
  377. to configure it. This comes with the standard ocfs2-tools package.
  378. O2CB is limited to maintaining a cluster for OCFS2 file systems.
  379. It cannot manage any other cluster applications.
  380. It is always safe to say Y here, as the clustering method is
  381. run-time selectable.
  382. config OCFS2_FS_USERSPACE_CLUSTER
  383. tristate "OCFS2 Userspace Clustering"
  384. depends on OCFS2_FS && DLM
  385. default y
  386. help
  387. This option will allow OCFS2 to use userspace clustering services
  388. in conjunction with the DLM in fs/dlm. If you are using a
  389. userspace cluster manager, say Y here.
  390. It is safe to say Y, as the clustering method is run-time
  391. selectable.
  392. config OCFS2_FS_STATS
  393. bool "OCFS2 statistics"
  394. depends on OCFS2_FS
  395. default y
  396. help
  397. This option allows some fs statistics to be captured. Enabling
  398. this option may increase the memory consumption.
  399. config OCFS2_DEBUG_MASKLOG
  400. bool "OCFS2 logging support"
  401. depends on OCFS2_FS
  402. default y
  403. help
  404. The ocfs2 filesystem has an extensive logging system. The system
  405. allows selection of events to log via files in /sys/o2cb/logmask/.
  406. This option will enlarge your kernel, but it allows debugging of
  407. ocfs2 filesystem issues.
  408. config OCFS2_DEBUG_FS
  409. bool "OCFS2 expensive checks"
  410. depends on OCFS2_FS
  411. default n
  412. help
  413. This option will enable expensive consistency checks. Enable
  414. this option for debugging only as it is likely to decrease
  415. performance of the filesystem.
  416. endif # BLOCK
  417. config DNOTIFY
  418. bool "Dnotify support"
  419. default y
  420. help
  421. Dnotify is a directory-based per-fd file change notification system
  422. that uses signals to communicate events to user-space. There exist
  423. superior alternatives, but some applications may still rely on
  424. dnotify.
  425. If unsure, say Y.
  426. config INOTIFY
  427. bool "Inotify file change notification support"
  428. default y
  429. ---help---
  430. Say Y here to enable inotify support. Inotify is a file change
  431. notification system and a replacement for dnotify. Inotify fixes
  432. numerous shortcomings in dnotify and introduces several new features
  433. including multiple file events, one-shot support, and unmount
  434. notification.
  435. For more information, see <file:Documentation/filesystems/inotify.txt>
  436. If unsure, say Y.
  437. config INOTIFY_USER
  438. bool "Inotify support for userspace"
  439. depends on INOTIFY
  440. default y
  441. ---help---
  442. Say Y here to enable inotify support for userspace, including the
  443. associated system calls. Inotify allows monitoring of both files and
  444. directories via a single open fd. Events are read from the file
  445. descriptor, which is also select()- and poll()-able.
  446. For more information, see <file:Documentation/filesystems/inotify.txt>
  447. If unsure, say Y.
  448. config QUOTA
  449. bool "Quota support"
  450. help
  451. If you say Y here, you will be able to set per user limits for disk
  452. usage (also called disk quotas). Currently, it works for the
  453. ext2, ext3, and reiserfs file system. ext3 also supports journalled
  454. quotas for which you don't need to run quotacheck(8) after an unclean
  455. shutdown.
  456. For further details, read the Quota mini-HOWTO, available from
  457. <http://www.tldp.org/docs.html#howto>, or the documentation provided
  458. with the quota tools. Probably the quota support is only useful for
  459. multi user systems. If unsure, say N.
  460. config QUOTA_NETLINK_INTERFACE
  461. bool "Report quota messages through netlink interface"
  462. depends on QUOTA && NET
  463. help
  464. If you say Y here, quota warnings (about exceeding softlimit, reaching
  465. hardlimit, etc.) will be reported through netlink interface. If unsure,
  466. say Y.
  467. config PRINT_QUOTA_WARNING
  468. bool "Print quota warnings to console (OBSOLETE)"
  469. depends on QUOTA
  470. default y
  471. help
  472. If you say Y here, quota warnings (about exceeding softlimit, reaching
  473. hardlimit, etc.) will be printed to the process' controlling terminal.
  474. Note that this behavior is currently deprecated and may go away in
  475. future. Please use notification via netlink socket instead.
  476. config QFMT_V1
  477. tristate "Old quota format support"
  478. depends on QUOTA
  479. help
  480. This quota format was (is) used by kernels earlier than 2.4.22. If
  481. you have quota working and you don't want to convert to new quota
  482. format say Y here.
  483. config QFMT_V2
  484. tristate "Quota format v2 support"
  485. depends on QUOTA
  486. help
  487. This quota format allows using quotas with 32-bit UIDs/GIDs. If you
  488. need this functionality say Y here.
  489. config QUOTACTL
  490. bool
  491. depends on XFS_QUOTA || QUOTA
  492. default y
  493. config AUTOFS_FS
  494. tristate "Kernel automounter support"
  495. help
  496. The automounter is a tool to automatically mount remote file systems
  497. on demand. This implementation is partially kernel-based to reduce
  498. overhead in the already-mounted case; this is unlike the BSD
  499. automounter (amd), which is a pure user space daemon.
  500. To use the automounter you need the user-space tools from the autofs
  501. package; you can find the location in <file:Documentation/Changes>.
  502. You also want to answer Y to "NFS file system support", below.
  503. If you want to use the newer version of the automounter with more
  504. features, say N here and say Y to "Kernel automounter v4 support",
  505. below.
  506. To compile this support as a module, choose M here: the module will be
  507. called autofs.
  508. If you are not a part of a fairly large, distributed network, you
  509. probably do not need an automounter, and can say N here.
  510. config AUTOFS4_FS
  511. tristate "Kernel automounter version 4 support (also supports v3)"
  512. help
  513. The automounter is a tool to automatically mount remote file systems
  514. on demand. This implementation is partially kernel-based to reduce
  515. overhead in the already-mounted case; this is unlike the BSD
  516. automounter (amd), which is a pure user space daemon.
  517. To use the automounter you need the user-space tools from
  518. <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
  519. want to answer Y to "NFS file system support", below.
  520. To compile this support as a module, choose M here: the module will be
  521. called autofs4. You will need to add "alias autofs autofs4" to your
  522. modules configuration file.
  523. If you are not a part of a fairly large, distributed network or
  524. don't have a laptop which needs to dynamically reconfigure to the
  525. local network, you probably do not need an automounter, and can say
  526. N here.
  527. config FUSE_FS
  528. tristate "Filesystem in Userspace support"
  529. help
  530. With FUSE it is possible to implement a fully functional filesystem
  531. in a userspace program.
  532. There's also companion library: libfuse. This library along with
  533. utilities is available from the FUSE homepage:
  534. <http://fuse.sourceforge.net/>
  535. See <file:Documentation/filesystems/fuse.txt> for more information.
  536. See <file:Documentation/Changes> for needed library/utility version.
  537. If you want to develop a userspace FS, or if you want to use
  538. a filesystem based on FUSE, answer Y or M.
  539. config GENERIC_ACL
  540. bool
  541. select FS_POSIX_ACL
  542. if BLOCK
  543. menu "CD-ROM/DVD Filesystems"
  544. config ISO9660_FS
  545. tristate "ISO 9660 CDROM file system support"
  546. help
  547. This is the standard file system used on CD-ROMs. It was previously
  548. known as "High Sierra File System" and is called "hsfs" on other
  549. Unix systems. The so-called Rock-Ridge extensions which allow for
  550. long Unix filenames and symbolic links are also supported by this
  551. driver. If you have a CD-ROM drive and want to do more with it than
  552. just listen to audio CDs and watch its LEDs, say Y (and read
  553. <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
  554. available from <http://www.tldp.org/docs.html#howto>), thereby
  555. enlarging your kernel by about 27 KB; otherwise say N.
  556. To compile this file system support as a module, choose M here: the
  557. module will be called isofs.
  558. config JOLIET
  559. bool "Microsoft Joliet CDROM extensions"
  560. depends on ISO9660_FS
  561. select NLS
  562. help
  563. Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
  564. which allows for long filenames in unicode format (unicode is the
  565. new 16 bit character code, successor to ASCII, which encodes the
  566. characters of almost all languages of the world; see
  567. <http://www.unicode.org/> for more information). Say Y here if you
  568. want to be able to read Joliet CD-ROMs under Linux.
  569. config ZISOFS
  570. bool "Transparent decompression extension"
  571. depends on ISO9660_FS
  572. select ZLIB_INFLATE
  573. help
  574. This is a Linux-specific extension to RockRidge which lets you store
  575. data in compressed form on a CD-ROM and have it transparently
  576. decompressed when the CD-ROM is accessed. See
  577. <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
  578. necessary to create such a filesystem. Say Y here if you want to be
  579. able to read such compressed CD-ROMs.
  580. config UDF_FS
  581. tristate "UDF file system support"
  582. select CRC_ITU_T
  583. help
  584. This is the new file system used on some CD-ROMs and DVDs. Say Y if
  585. you intend to mount DVD discs or CDRW's written in packet mode, or
  586. if written to by other UDF utilities, such as DirectCD.
  587. Please read <file:Documentation/filesystems/udf.txt>.
  588. To compile this file system support as a module, choose M here: the
  589. module will be called udf.
  590. If unsure, say N.
  591. config UDF_NLS
  592. bool
  593. default y
  594. depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
  595. endmenu
  596. endif # BLOCK
  597. if BLOCK
  598. menu "DOS/FAT/NT Filesystems"
  599. config FAT_FS
  600. tristate
  601. select NLS
  602. help
  603. If you want to use one of the FAT-based file systems (the MS-DOS and
  604. VFAT (Windows 95) file systems), then you must say Y or M here
  605. to include FAT support. You will then be able to mount partitions or
  606. diskettes with FAT-based file systems and transparently access the
  607. files on them, i.e. MSDOS files will look and behave just like all
  608. other Unix files.
  609. This FAT support is not a file system in itself, it only provides
  610. the foundation for the other file systems. You will have to say Y or
  611. M to at least one of "MSDOS fs support" or "VFAT fs support" in
  612. order to make use of it.
  613. Another way to read and write MSDOS floppies and hard drive
  614. partitions from within Linux (but not transparently) is with the
  615. mtools ("man mtools") program suite. You don't need to say Y here in
  616. order to do that.
  617. If you need to move large files on floppies between a DOS and a
  618. Linux box, say Y here, mount the floppy under Linux with an MSDOS
  619. file system and use GNU tar's M option. GNU tar is a program
  620. available for Unix and DOS ("man tar" or "info tar").
  621. The FAT support will enlarge your kernel by about 37 KB. If unsure,
  622. say Y.
  623. To compile this as a module, choose M here: the module will be called
  624. fat. Note that if you compile the FAT support as a module, you
  625. cannot compile any of the FAT-based file systems into the kernel
  626. -- they will have to be modules as well.
  627. config MSDOS_FS
  628. tristate "MSDOS fs support"
  629. select FAT_FS
  630. help
  631. This allows you to mount MSDOS partitions of your hard drive (unless
  632. they are compressed; to access compressed MSDOS partitions under
  633. Linux, you can either use the DOS emulator DOSEMU, described in the
  634. DOSEMU-HOWTO, available from
  635. <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
  636. <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
  637. intend to use dosemu with a non-compressed MSDOS partition, say Y
  638. here) and MSDOS floppies. This means that file access becomes
  639. transparent, i.e. the MSDOS files look and behave just like all
  640. other Unix files.
  641. If you have Windows 95 or Windows NT installed on your MSDOS
  642. partitions, you should use the VFAT file system (say Y to "VFAT fs
  643. support" below), or you will not be able to see the long filenames
  644. generated by Windows 95 / Windows NT.
  645. This option will enlarge your kernel by about 7 KB. If unsure,
  646. answer Y. This will only work if you said Y to "DOS FAT fs support"
  647. as well. To compile this as a module, choose M here: the module will
  648. be called msdos.
  649. config VFAT_FS
  650. tristate "VFAT (Windows-95) fs support"
  651. select FAT_FS
  652. help
  653. This option provides support for normal Windows file systems with
  654. long filenames. That includes non-compressed FAT-based file systems
  655. used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
  656. programs from the mtools package.
  657. The VFAT support enlarges your kernel by about 10 KB and it only
  658. works if you said Y to the "DOS FAT fs support" above. Please read
  659. the file <file:Documentation/filesystems/vfat.txt> for details. If
  660. unsure, say Y.
  661. To compile this as a module, choose M here: the module will be called
  662. vfat.
  663. config FAT_DEFAULT_CODEPAGE
  664. int "Default codepage for FAT"
  665. depends on MSDOS_FS || VFAT_FS
  666. default 437
  667. help
  668. This option should be set to the codepage of your FAT filesystems.
  669. It can be overridden with the "codepage" mount option.
  670. See <file:Documentation/filesystems/vfat.txt> for more information.
  671. config FAT_DEFAULT_IOCHARSET
  672. string "Default iocharset for FAT"
  673. depends on VFAT_FS
  674. default "iso8859-1"
  675. help
  676. Set this to the default input/output character set you'd
  677. like FAT to use. It should probably match the character set
  678. that most of your FAT filesystems use, and can be overridden
  679. with the "iocharset" mount option for FAT filesystems.
  680. Note that "utf8" is not recommended for FAT filesystems.
  681. If unsure, you shouldn't set "utf8" here.
  682. See <file:Documentation/filesystems/vfat.txt> for more information.
  683. config NTFS_FS
  684. tristate "NTFS file system support"
  685. select NLS
  686. help
  687. NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
  688. Saying Y or M here enables read support. There is partial, but
  689. safe, write support available. For write support you must also
  690. say Y to "NTFS write support" below.
  691. There are also a number of user-space tools available, called
  692. ntfsprogs. These include ntfsundelete and ntfsresize, that work
  693. without NTFS support enabled in the kernel.
  694. This is a rewrite from scratch of Linux NTFS support and replaced
  695. the old NTFS code starting with Linux 2.5.11. A backport to
  696. the Linux 2.4 kernel series is separately available as a patch
  697. from the project web site.
  698. For more information see <file:Documentation/filesystems/ntfs.txt>
  699. and <http://www.linux-ntfs.org/>.
  700. To compile this file system support as a module, choose M here: the
  701. module will be called ntfs.
  702. If you are not using Windows NT, 2000, XP or 2003 in addition to
  703. Linux on your computer it is safe to say N.
  704. config NTFS_DEBUG
  705. bool "NTFS debugging support"
  706. depends on NTFS_FS
  707. help
  708. If you are experiencing any problems with the NTFS file system, say
  709. Y here. This will result in additional consistency checks to be
  710. performed by the driver as well as additional debugging messages to
  711. be written to the system log. Note that debugging messages are
  712. disabled by default. To enable them, supply the option debug_msgs=1
  713. at the kernel command line when booting the kernel or as an option
  714. to insmod when loading the ntfs module. Once the driver is active,
  715. you can enable debugging messages by doing (as root):
  716. echo 1 > /proc/sys/fs/ntfs-debug
  717. Replacing the "1" with "0" would disable debug messages.
  718. If you leave debugging messages disabled, this results in little
  719. overhead, but enabling debug messages results in very significant
  720. slowdown of the system.
  721. When reporting bugs, please try to have available a full dump of
  722. debugging messages while the misbehaviour was occurring.
  723. config NTFS_RW
  724. bool "NTFS write support"
  725. depends on NTFS_FS
  726. help
  727. This enables the partial, but safe, write support in the NTFS driver.
  728. The only supported operation is overwriting existing files, without
  729. changing the file length. No file or directory creation, deletion or
  730. renaming is possible. Note only non-resident files can be written to
  731. so you may find that some very small files (<500 bytes or so) cannot
  732. be written to.
  733. While we cannot guarantee that it will not damage any data, we have
  734. so far not received a single report where the driver would have
  735. damaged someones data so we assume it is perfectly safe to use.
  736. Note: While write support is safe in this version (a rewrite from
  737. scratch of the NTFS support), it should be noted that the old NTFS
  738. write support, included in Linux 2.5.10 and before (since 1997),
  739. is not safe.
  740. This is currently useful with TopologiLinux. TopologiLinux is run
  741. on top of any DOS/Microsoft Windows system without partitioning your
  742. hard disk. Unlike other Linux distributions TopologiLinux does not
  743. need its own partition. For more information see
  744. <http://topologi-linux.sourceforge.net/>
  745. It is perfectly safe to say N here.
  746. endmenu
  747. endif # BLOCK
  748. menu "Pseudo filesystems"
  749. source "fs/proc/Kconfig"
  750. config SYSFS
  751. bool "sysfs file system support" if EMBEDDED
  752. default y
  753. help
  754. The sysfs filesystem is a virtual filesystem that the kernel uses to
  755. export internal kernel objects, their attributes, and their
  756. relationships to one another.
  757. Users can use sysfs to ascertain useful information about the running
  758. kernel, such as the devices the kernel has discovered on each bus and
  759. which driver each is bound to. sysfs can also be used to tune devices
  760. and other kernel subsystems.
  761. Some system agents rely on the information in sysfs to operate.
  762. /sbin/hotplug uses device and object attributes in sysfs to assist in
  763. delegating policy decisions, like persistently naming devices.
  764. sysfs is currently used by the block subsystem to mount the root
  765. partition. If sysfs is disabled you must specify the boot device on
  766. the kernel boot command line via its major and minor numbers. For
  767. example, "root=03:01" for /dev/hda1.
  768. Designers of embedded systems may wish to say N here to conserve space.
  769. config TMPFS
  770. bool "Virtual memory file system support (former shm fs)"
  771. help
  772. Tmpfs is a file system which keeps all files in virtual memory.
  773. Everything in tmpfs is temporary in the sense that no files will be
  774. created on your hard drive. The files live in memory and swap
  775. space. If you unmount a tmpfs instance, everything stored therein is
  776. lost.
  777. See <file:Documentation/filesystems/tmpfs.txt> for details.
  778. config TMPFS_POSIX_ACL
  779. bool "Tmpfs POSIX Access Control Lists"
  780. depends on TMPFS
  781. select GENERIC_ACL
  782. help
  783. POSIX Access Control Lists (ACLs) support permissions for users and
  784. groups beyond the owner/group/world scheme.
  785. To learn more about Access Control Lists, visit the POSIX ACLs for
  786. Linux website <http://acl.bestbits.at/>.
  787. If you don't know what Access Control Lists are, say N.
  788. config HUGETLBFS
  789. bool "HugeTLB file system support"
  790. depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \
  791. (S390 && 64BIT) || BROKEN
  792. help
  793. hugetlbfs is a filesystem backing for HugeTLB pages, based on
  794. ramfs. For architectures that support it, say Y here and read
  795. <file:Documentation/vm/hugetlbpage.txt> for details.
  796. If unsure, say N.
  797. config HUGETLB_PAGE
  798. def_bool HUGETLBFS
  799. config CONFIGFS_FS
  800. tristate "Userspace-driven configuration filesystem"
  801. depends on SYSFS
  802. help
  803. configfs is a ram-based filesystem that provides the converse
  804. of sysfs's functionality. Where sysfs is a filesystem-based
  805. view of kernel objects, configfs is a filesystem-based manager
  806. of kernel objects, or config_items.
  807. Both sysfs and configfs can and should exist together on the
  808. same system. One is not a replacement for the other.
  809. endmenu
  810. menu "Miscellaneous filesystems"
  811. config ADFS_FS
  812. tristate "ADFS file system support (EXPERIMENTAL)"
  813. depends on BLOCK && EXPERIMENTAL
  814. help
  815. The Acorn Disc Filing System is the standard file system of the
  816. RiscOS operating system which runs on Acorn's ARM-based Risc PC
  817. systems and the Acorn Archimedes range of machines. If you say Y
  818. here, Linux will be able to read from ADFS partitions on hard drives
  819. and from ADFS-formatted floppy discs. If you also want to be able to
  820. write to those devices, say Y to "ADFS write support" below.
  821. The ADFS partition should be the first partition (i.e.,
  822. /dev/[hs]d?1) on each of your drives. Please read the file
  823. <file:Documentation/filesystems/adfs.txt> for further details.
  824. To compile this code as a module, choose M here: the module will be
  825. called adfs.
  826. If unsure, say N.
  827. config ADFS_FS_RW
  828. bool "ADFS write support (DANGEROUS)"
  829. depends on ADFS_FS
  830. help
  831. If you say Y here, you will be able to write to ADFS partitions on
  832. hard drives and ADFS-formatted floppy disks. This is experimental
  833. codes, so if you're unsure, say N.
  834. config AFFS_FS
  835. tristate "Amiga FFS file system support (EXPERIMENTAL)"
  836. depends on BLOCK && EXPERIMENTAL
  837. help
  838. The Fast File System (FFS) is the common file system used on hard
  839. disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
  840. if you want to be able to read and write files from and to an Amiga
  841. FFS partition on your hard drive. Amiga floppies however cannot be
  842. read with this driver due to an incompatibility of the floppy
  843. controller used in an Amiga and the standard floppy controller in
  844. PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
  845. and <file:fs/affs/Changes>.
  846. With this driver you can also mount disk files used by Bernd
  847. Schmidt's Un*X Amiga Emulator
  848. (<http://www.freiburg.linux.de/~uae/>).
  849. If you want to do this, you will also need to say Y or M to "Loop
  850. device support", above.
  851. To compile this file system support as a module, choose M here: the
  852. module will be called affs. If unsure, say N.
  853. config ECRYPT_FS
  854. tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
  855. depends on EXPERIMENTAL && KEYS && CRYPTO && NET
  856. help
  857. Encrypted filesystem that operates on the VFS layer. See
  858. <file:Documentation/filesystems/ecryptfs.txt> to learn more about
  859. eCryptfs. Userspace components are required and can be
  860. obtained from <http://ecryptfs.sf.net>.
  861. To compile this file system support as a module, choose M here: the
  862. module will be called ecryptfs.
  863. config HFS_FS
  864. tristate "Apple Macintosh file system support (EXPERIMENTAL)"
  865. depends on BLOCK && EXPERIMENTAL
  866. select NLS
  867. help
  868. If you say Y here, you will be able to mount Macintosh-formatted
  869. floppy disks and hard drive partitions with full read-write access.
  870. Please read <file:Documentation/filesystems/hfs.txt> to learn about
  871. the available mount options.
  872. To compile this file system support as a module, choose M here: the
  873. module will be called hfs.
  874. config HFSPLUS_FS
  875. tristate "Apple Extended HFS file system support"
  876. depends on BLOCK
  877. select NLS
  878. select NLS_UTF8
  879. help
  880. If you say Y here, you will be able to mount extended format
  881. Macintosh-formatted hard drive partitions with full read-write access.
  882. This file system is often called HFS+ and was introduced with
  883. MacOS 8. It includes all Mac specific filesystem data such as
  884. data forks and creator codes, but it also has several UNIX
  885. style features such as file ownership and permissions.
  886. config BEFS_FS
  887. tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
  888. depends on BLOCK && EXPERIMENTAL
  889. select NLS
  890. help
  891. The BeOS File System (BeFS) is the native file system of Be, Inc's
  892. BeOS. Notable features include support for arbitrary attributes
  893. on files and directories, and database-like indices on selected
  894. attributes. (Also note that this driver doesn't make those features
  895. available at this time). It is a 64 bit filesystem, so it supports
  896. extremely large volumes and files.
  897. If you use this filesystem, you should also say Y to at least one
  898. of the NLS (native language support) options below.
  899. If you don't know what this is about, say N.
  900. To compile this as a module, choose M here: the module will be
  901. called befs.
  902. config BEFS_DEBUG
  903. bool "Debug BeFS"
  904. depends on BEFS_FS
  905. help
  906. If you say Y here, you can use the 'debug' mount option to enable
  907. debugging output from the driver.
  908. config BFS_FS
  909. tristate "BFS file system support (EXPERIMENTAL)"
  910. depends on BLOCK && EXPERIMENTAL
  911. help
  912. Boot File System (BFS) is a file system used under SCO UnixWare to
  913. allow the bootloader access to the kernel image and other important
  914. files during the boot process. It is usually mounted under /stand
  915. and corresponds to the slice marked as "STAND" in the UnixWare
  916. partition. You should say Y if you want to read or write the files
  917. on your /stand slice from within Linux. You then also need to say Y
  918. to "UnixWare slices support", below. More information about the BFS
  919. file system is contained in the file
  920. <file:Documentation/filesystems/bfs.txt>.
  921. If you don't know what this is about, say N.
  922. To compile this as a module, choose M here: the module will be called
  923. bfs. Note that the file system of your root partition (the one
  924. containing the directory /) cannot be compiled as a module.
  925. config EFS_FS
  926. tristate "EFS file system support (read only) (EXPERIMENTAL)"
  927. depends on BLOCK && EXPERIMENTAL
  928. help
  929. EFS is an older file system used for non-ISO9660 CD-ROMs and hard
  930. disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
  931. uses the XFS file system for hard disk partitions however).
  932. This implementation only offers read-only access. If you don't know
  933. what all this is about, it's safe to say N. For more information
  934. about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
  935. To compile the EFS file system support as a module, choose M here: the
  936. module will be called efs.
  937. config JFFS2_FS
  938. tristate "Journalling Flash File System v2 (JFFS2) support"
  939. select CRC32
  940. depends on MTD
  941. help
  942. JFFS2 is the second generation of the Journalling Flash File System
  943. for use on diskless embedded devices. It provides improved wear
  944. levelling, compression and support for hard links. You cannot use
  945. this on normal block devices, only on 'MTD' devices.
  946. Further information on the design and implementation of JFFS2 is
  947. available at <http://sources.redhat.com/jffs2/>.
  948. config JFFS2_FS_DEBUG
  949. int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
  950. depends on JFFS2_FS
  951. default "0"
  952. help
  953. This controls the amount of debugging messages produced by the JFFS2
  954. code. Set it to zero for use in production systems. For evaluation,
  955. testing and debugging, it's advisable to set it to one. This will
  956. enable a few assertions and will print debugging messages at the
  957. KERN_DEBUG loglevel, where they won't normally be visible. Level 2
  958. is unlikely to be useful - it enables extra debugging in certain
  959. areas which at one point needed debugging, but when the bugs were
  960. located and fixed, the detailed messages were relegated to level 2.
  961. If reporting bugs, please try to have available a full dump of the
  962. messages at debug level 1 while the misbehaviour was occurring.
  963. config JFFS2_FS_WRITEBUFFER
  964. bool "JFFS2 write-buffering support"
  965. depends on JFFS2_FS
  966. default y
  967. help
  968. This enables the write-buffering support in JFFS2.
  969. This functionality is required to support JFFS2 on the following
  970. types of flash devices:
  971. - NAND flash
  972. - NOR flash with transparent ECC
  973. - DataFlash
  974. config JFFS2_FS_WBUF_VERIFY
  975. bool "Verify JFFS2 write-buffer reads"
  976. depends on JFFS2_FS_WRITEBUFFER
  977. default n
  978. help
  979. This causes JFFS2 to read back every page written through the
  980. write-buffer, and check for errors.
  981. config JFFS2_SUMMARY
  982. bool "JFFS2 summary support (EXPERIMENTAL)"
  983. depends on JFFS2_FS && EXPERIMENTAL
  984. default n
  985. help
  986. This feature makes it possible to use summary information
  987. for faster filesystem mount.
  988. The summary information can be inserted into a filesystem image
  989. by the utility 'sumtool'.
  990. If unsure, say 'N'.
  991. config JFFS2_FS_XATTR
  992. bool "JFFS2 XATTR support (EXPERIMENTAL)"
  993. depends on JFFS2_FS && EXPERIMENTAL
  994. default n
  995. help
  996. Extended attributes are name:value pairs associated with inodes by
  997. the kernel or by users (see the attr(5) manual page, or visit
  998. <http://acl.bestbits.at/> for details).
  999. If unsure, say N.
  1000. config JFFS2_FS_POSIX_ACL
  1001. bool "JFFS2 POSIX Access Control Lists"
  1002. depends on JFFS2_FS_XATTR
  1003. default y
  1004. select FS_POSIX_ACL
  1005. help
  1006. Posix Access Control Lists (ACLs) support permissions for users and
  1007. groups beyond the owner/group/world scheme.
  1008. To learn more about Access Control Lists, visit the Posix ACLs for
  1009. Linux website <http://acl.bestbits.at/>.
  1010. If you don't know what Access Control Lists are, say N
  1011. config JFFS2_FS_SECURITY
  1012. bool "JFFS2 Security Labels"
  1013. depends on JFFS2_FS_XATTR
  1014. default y
  1015. help
  1016. Security labels support alternative access control models
  1017. implemented by security modules like SELinux. This option
  1018. enables an extended attribute handler for file security
  1019. labels in the jffs2 filesystem.
  1020. If you are not using a security module that requires using
  1021. extended attributes for file security labels, say N.
  1022. config JFFS2_COMPRESSION_OPTIONS
  1023. bool "Advanced compression options for JFFS2"
  1024. depends on JFFS2_FS
  1025. default n
  1026. help
  1027. Enabling this option allows you to explicitly choose which
  1028. compression modules, if any, are enabled in JFFS2. Removing
  1029. compressors can mean you cannot read existing file systems,
  1030. and enabling experimental compressors can mean that you
  1031. write a file system which cannot be read by a standard kernel.
  1032. If unsure, you should _definitely_ say 'N'.
  1033. config JFFS2_ZLIB
  1034. bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
  1035. select ZLIB_INFLATE
  1036. select ZLIB_DEFLATE
  1037. depends on JFFS2_FS
  1038. default y
  1039. help
  1040. Zlib is designed to be a free, general-purpose, legally unencumbered,
  1041. lossless data-compression library for use on virtually any computer
  1042. hardware and operating system. See <http://www.gzip.org/zlib/> for
  1043. further information.
  1044. Say 'Y' if unsure.
  1045. config JFFS2_LZO
  1046. bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
  1047. select LZO_COMPRESS
  1048. select LZO_DECOMPRESS
  1049. depends on JFFS2_FS
  1050. default n
  1051. help
  1052. minilzo-based compression. Generally works better than Zlib.
  1053. This feature was added in July, 2007. Say 'N' if you need
  1054. compatibility with older bootloaders or kernels.
  1055. config JFFS2_RTIME
  1056. bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
  1057. depends on JFFS2_FS
  1058. default y
  1059. help
  1060. Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
  1061. config JFFS2_RUBIN
  1062. bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
  1063. depends on JFFS2_FS
  1064. default n
  1065. help
  1066. RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
  1067. choice
  1068. prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
  1069. default JFFS2_CMODE_PRIORITY
  1070. depends on JFFS2_FS
  1071. help
  1072. You can set here the default compression mode of JFFS2 from
  1073. the available compression modes. Don't touch if unsure.
  1074. config JFFS2_CMODE_NONE
  1075. bool "no compression"
  1076. help
  1077. Uses no compression.
  1078. config JFFS2_CMODE_PRIORITY
  1079. bool "priority"
  1080. help
  1081. Tries the compressors in a predefined order and chooses the first
  1082. successful one.
  1083. config JFFS2_CMODE_SIZE
  1084. bool "size (EXPERIMENTAL)"
  1085. help
  1086. Tries all compressors and chooses the one which has the smallest
  1087. result.
  1088. config JFFS2_CMODE_FAVOURLZO
  1089. bool "Favour LZO"
  1090. help
  1091. Tries all compressors and chooses the one which has the smallest
  1092. result but gives some preference to LZO (which has faster
  1093. decompression) at the expense of size.
  1094. endchoice
  1095. # UBIFS File system configuration
  1096. source "fs/ubifs/Kconfig"
  1097. config CRAMFS
  1098. tristate "Compressed ROM file system support (cramfs)"
  1099. depends on BLOCK
  1100. select ZLIB_INFLATE
  1101. help
  1102. Saying Y here includes support for CramFs (Compressed ROM File
  1103. System). CramFs is designed to be a simple, small, and compressed
  1104. file system for ROM based embedded systems. CramFs is read-only,
  1105. limited to 256MB file systems (with 16MB files), and doesn't support
  1106. 16/32 bits uid/gid, hard links and timestamps.
  1107. See <file:Documentation/filesystems/cramfs.txt> and
  1108. <file:fs/cramfs/README> for further information.
  1109. To compile this as a module, choose M here: the module will be called
  1110. cramfs. Note that the root file system (the one containing the
  1111. directory /) cannot be compiled as a module.
  1112. If unsure, say N.
  1113. config VXFS_FS
  1114. tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
  1115. depends on BLOCK
  1116. help
  1117. FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
  1118. file system format. VERITAS VxFS(TM) is the standard file system
  1119. of SCO UnixWare (and possibly others) and optionally available
  1120. for Sunsoft Solaris, HP-UX and many other operating systems.
  1121. Currently only readonly access is supported.
  1122. NOTE: the file system type as used by mount(1), mount(2) and
  1123. fstab(5) is 'vxfs' as it describes the file system format, not
  1124. the actual driver.
  1125. To compile this as a module, choose M here: the module will be
  1126. called freevxfs. If unsure, say N.
  1127. config MINIX_FS
  1128. tristate "Minix file system support"
  1129. depends on BLOCK
  1130. help
  1131. Minix is a simple operating system used in many classes about OS's.
  1132. The minix file system (method to organize files on a hard disk
  1133. partition or a floppy disk) was the original file system for Linux,
  1134. but has been superseded by the second extended file system ext2fs.
  1135. You don't want to use the minix file system on your hard disk
  1136. because of certain built-in restrictions, but it is sometimes found
  1137. on older Linux floppy disks. This option will enlarge your kernel
  1138. by about 28 KB. If unsure, say N.
  1139. To compile this file system support as a module, choose M here: the
  1140. module will be called minix. Note that the file system of your root
  1141. partition (the one containing the directory /) cannot be compiled as
  1142. a module.
  1143. config OMFS_FS
  1144. tristate "SonicBlue Optimized MPEG File System support"
  1145. depends on BLOCK
  1146. select CRC_ITU_T
  1147. help
  1148. This is the proprietary file system used by the Rio Karma music
  1149. player and ReplayTV DVR. Despite the name, this filesystem is not
  1150. more efficient than a standard FS for MPEG files, in fact likely
  1151. the opposite is true. Say Y if you have either of these devices
  1152. and wish to mount its disk.
  1153. To compile this file system support as a module, choose M here: the
  1154. module will be called omfs. If unsure, say N.
  1155. config HPFS_FS
  1156. tristate "OS/2 HPFS file system support"
  1157. depends on BLOCK
  1158. help
  1159. OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
  1160. is the file system used for organizing files on OS/2 hard disk
  1161. partitions. Say Y if you want to be able to read files from and
  1162. write files to an OS/2 HPFS partition on your hard drive. OS/2
  1163. floppies however are in regular MSDOS format, so you don't need this
  1164. option in order to be able to read them. Read
  1165. <file:Documentation/filesystems/hpfs.txt>.
  1166. To compile this file system support as a module, choose M here: the
  1167. module will be called hpfs. If unsure, say N.
  1168. config QNX4FS_FS
  1169. tristate "QNX4 file system support (read only)"
  1170. depends on BLOCK
  1171. help
  1172. This is the file system used by the real-time operating systems
  1173. QNX 4 and QNX 6 (the latter is also called QNX RTP).
  1174. Further information is available at <http://www.qnx.com/>.
  1175. Say Y if you intend to mount QNX hard disks or floppies.
  1176. Unless you say Y to "QNX4FS read-write support" below, you will
  1177. only be able to read these file systems.
  1178. To compile this file system support as a module, choose M here: the
  1179. module will be called qnx4.
  1180. If you don't know whether you need it, then you don't need it:
  1181. answer N.
  1182. config QNX4FS_RW
  1183. bool "QNX4FS write support (DANGEROUS)"
  1184. depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
  1185. help
  1186. Say Y if you want to test write support for QNX4 file systems.
  1187. It's currently broken, so for now:
  1188. answer N.
  1189. config ROMFS_FS
  1190. tristate "ROM file system support"
  1191. depends on BLOCK
  1192. ---help---
  1193. This is a very small read-only file system mainly intended for
  1194. initial ram disks of installation disks, but it could be used for
  1195. other read-only media as well. Read
  1196. <file:Documentation/filesystems/romfs.txt> for details.
  1197. To compile this file system support as a module, choose M here: the
  1198. module will be called romfs. Note that the file system of your
  1199. root partition (the one containing the directory /) cannot be a
  1200. module.
  1201. If you don't know whether you need it, then you don't need it:
  1202. answer N.
  1203. config SYSV_FS
  1204. tristate "System V/Xenix/V7/Coherent file system support"
  1205. depends on BLOCK
  1206. help
  1207. SCO, Xenix and Coherent are commercial Unix systems for Intel
  1208. machines, and Version 7 was used on the DEC PDP-11. Saying Y
  1209. here would allow you to read from their floppies and hard disk
  1210. partitions.
  1211. If you have floppies or hard disk partitions like that, it is likely
  1212. that they contain binaries from those other Unix systems; in order
  1213. to run these binaries, you will want to install linux-abi which is
  1214. a set of kernel modules that lets you run SCO, Xenix, Wyse,
  1215. UnixWare, Dell Unix and System V programs under Linux. It is
  1216. available via FTP (user: ftp) from
  1217. <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
  1218. NOTE: that will work only for binaries from Intel-based systems;
  1219. PDP ones will have to wait until somebody ports Linux to -11 ;-)
  1220. If you only intend to mount files from some other Unix over the
  1221. network using NFS, you don't need the System V file system support
  1222. (but you need NFS file system support obviously).
  1223. Note that this option is generally not needed for floppies, since a
  1224. good portable way to transport files and directories between unixes
  1225. (and even other operating systems) is given by the tar program ("man
  1226. tar" or preferably "info tar"). Note also that this option has
  1227. nothing whatsoever to do with the option "System V IPC". Read about
  1228. the System V file system in
  1229. <file:Documentation/filesystems/sysv-fs.txt>.
  1230. Saying Y here will enlarge your kernel by about 27 KB.
  1231. To compile this as a module, choose M here: the module will be called
  1232. sysv.
  1233. If you haven't heard about all of this before, it's safe to say N.
  1234. config UFS_FS
  1235. tristate "UFS file system support (read only)"
  1236. depends on BLOCK
  1237. help
  1238. BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
  1239. OpenBSD and NeXTstep) use a file system called UFS. Some System V
  1240. Unixes can create and mount hard disk partitions and diskettes using
  1241. this file system as well. Saying Y here will allow you to read from
  1242. these partitions; if you also want to write to them, say Y to the
  1243. experimental "UFS file system write support", below. Please read the
  1244. file <file:Documentation/filesystems/ufs.txt> for more information.
  1245. The recently released UFS2 variant (used in FreeBSD 5.x) is
  1246. READ-ONLY supported.
  1247. Note that this option is generally not needed for floppies, since a
  1248. good portable way to transport files and directories between unixes
  1249. (and even other operating systems) is given by the tar program ("man
  1250. tar" or preferably "info tar").
  1251. When accessing NeXTstep files, you may need to convert them from the
  1252. NeXT character set to the Latin1 character set; use the program
  1253. recode ("info recode") for this purpose.
  1254. To compile the UFS file system support as a module, choose M here: the
  1255. module will be called ufs.
  1256. If you haven't heard about all of this before, it's safe to say N.
  1257. config UFS_FS_WRITE
  1258. bool "UFS file system write support (DANGEROUS)"
  1259. depends on UFS_FS && EXPERIMENTAL
  1260. help
  1261. Say Y here if you want to try writing to UFS partitions. This is
  1262. experimental, so you should back up your UFS partitions beforehand.
  1263. config UFS_DEBUG
  1264. bool "UFS debugging"
  1265. depends on UFS_FS
  1266. help
  1267. If you are experiencing any problems with the UFS filesystem, say
  1268. Y here. This will result in _many_ additional debugging messages to be
  1269. written to the system log.
  1270. endmenu
  1271. menuconfig NETWORK_FILESYSTEMS
  1272. bool "Network File Systems"
  1273. default y
  1274. depends on NET
  1275. ---help---
  1276. Say Y here to get to see options for network filesystems and
  1277. filesystem-related networking code, such as NFS daemon and
  1278. RPCSEC security modules.
  1279. This option alone does not add any kernel code.
  1280. If you say N, all options in this submenu will be skipped and
  1281. disabled; if unsure, say Y here.
  1282. if NETWORK_FILESYSTEMS
  1283. config NFS_FS
  1284. tristate "NFS client support"
  1285. depends on INET
  1286. select LOCKD
  1287. select SUNRPC
  1288. select NFS_ACL_SUPPORT if NFS_V3_ACL
  1289. help
  1290. Choose Y here if you want to access files residing on other
  1291. computers using Sun's Network File System protocol. To compile
  1292. this file system support as a module, choose M here: the module
  1293. will be called nfs.
  1294. To mount file systems exported by NFS servers, you also need to
  1295. install the user space mount.nfs command which can be found in
  1296. the Linux nfs-utils package, available from http://linux-nfs.org/.
  1297. Information about using the mount command is available in the
  1298. mount(8) man page. More detail about the Linux NFS client
  1299. implementation is available via the nfs(5) man page.
  1300. Below you can choose which versions of the NFS protocol are
  1301. available in the kernel to mount NFS servers. Support for NFS
  1302. version 2 (RFC 1094) is always available when NFS_FS is selected.
  1303. To configure a system which mounts its root file system via NFS
  1304. at boot time, say Y here, select "Kernel level IP
  1305. autoconfiguration" in the NETWORK menu, and select "Root file
  1306. system on NFS" below. You cannot compile this file system as a
  1307. module in this case.
  1308. If unsure, say N.
  1309. config NFS_V3
  1310. bool "NFS client support for NFS version 3"
  1311. depends on NFS_FS
  1312. help
  1313. This option enables support for version 3 of the NFS protocol
  1314. (RFC 1813) in the kernel's NFS client.
  1315. If unsure, say Y.
  1316. config NFS_V3_ACL
  1317. bool "NFS client support for the NFSv3 ACL protocol extension"
  1318. depends on NFS_V3
  1319. help
  1320. Some NFS servers support an auxiliary NFSv3 ACL protocol that
  1321. Sun added to Solaris but never became an official part of the
  1322. NFS version 3 protocol. This protocol extension allows
  1323. applications on NFS clients to manipulate POSIX Access Control
  1324. Lists on files residing on NFS servers. NFS servers enforce
  1325. ACLs on local files whether this protocol is available or not.
  1326. Choose Y here if your NFS server supports the Solaris NFSv3 ACL
  1327. protocol extension and you want your NFS client to allow
  1328. applications to access and modify ACLs on files on the server.
  1329. Most NFS servers don't support the Solaris NFSv3 ACL protocol
  1330. extension. You can choose N here or specify the "noacl" mount
  1331. option to prevent your NFS client from trying to use the NFSv3
  1332. ACL protocol.
  1333. If unsure, say N.
  1334. config NFS_V4
  1335. bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
  1336. depends on NFS_FS && EXPERIMENTAL
  1337. select RPCSEC_GSS_KRB5
  1338. help
  1339. This option enables support for version 4 of the NFS protocol
  1340. (RFC 3530) in the kernel's NFS client.
  1341. To mount NFS servers using NFSv4, you also need to install user
  1342. space programs which can be found in the Linux nfs-utils package,
  1343. available from http://linux-nfs.org/.
  1344. If unsure, say N.
  1345. config ROOT_NFS
  1346. bool "Root file system on NFS"
  1347. depends on NFS_FS=y && IP_PNP
  1348. help
  1349. If you want your system to mount its root file system via NFS,
  1350. choose Y here. This is common practice for managing systems
  1351. without local permanent storage. For details, read
  1352. <file:Documentation/filesystems/nfsroot.txt>.
  1353. Most people say N here.
  1354. config NFSD
  1355. tristate "NFS server support"
  1356. depends on INET
  1357. select LOCKD
  1358. select SUNRPC
  1359. select EXPORTFS
  1360. select NFS_ACL_SUPPORT if NFSD_V2_ACL
  1361. help
  1362. Choose Y here if you want to allow other computers to access
  1363. files residing on this system using Sun's Network File System
  1364. protocol. To compile the NFS server support as a module,
  1365. choose M here: the module will be called nfsd.
  1366. You may choose to use a user-space NFS server instead, in which
  1367. case you can choose N here.
  1368. To export local file systems using NFS, you also need to install
  1369. user space programs which can be found in the Linux nfs-utils
  1370. package, available from http://linux-nfs.org/. More detail about
  1371. the Linux NFS server implementation is available via the
  1372. exports(5) man page.
  1373. Below you can choose which versions of the NFS protocol are
  1374. available to clients mounting the NFS server on this system.
  1375. Support for NFS version 2 (RFC 1094) is always available when
  1376. CONFIG_NFSD is selected.
  1377. If unsure, say N.
  1378. config NFSD_V2_ACL
  1379. bool
  1380. depends on NFSD
  1381. config NFSD_V3
  1382. bool "NFS server support for NFS version 3"
  1383. depends on NFSD
  1384. help
  1385. This option enables support in your system's NFS server for
  1386. version 3 of the NFS protocol (RFC 1813).
  1387. If unsure, say Y.
  1388. config NFSD_V3_ACL
  1389. bool "NFS server support for the NFSv3 ACL protocol extension"
  1390. depends on NFSD_V3
  1391. select NFSD_V2_ACL
  1392. help
  1393. Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
  1394. never became an official part of the NFS version 3 protocol.
  1395. This protocol extension allows applications on NFS clients to
  1396. manipulate POSIX Access Control Lists on files residing on NFS
  1397. servers. NFS servers enforce POSIX ACLs on local files whether
  1398. this protocol is available or not.
  1399. This option enables support in your system's NFS server for the
  1400. NFSv3 ACL protocol extension allowing NFS clients to manipulate
  1401. POSIX ACLs on files exported by your system's NFS server. NFS
  1402. clients which support the Solaris NFSv3 ACL protocol can then
  1403. access and modify ACLs on your NFS server.
  1404. To store ACLs on your NFS server, you also need to enable ACL-
  1405. related CONFIG options for your local file systems of choice.
  1406. If unsure, say N.
  1407. config NFSD_V4
  1408. bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
  1409. depends on NFSD && PROC_FS && EXPERIMENTAL
  1410. select NFSD_V3
  1411. select FS_POSIX_ACL
  1412. select RPCSEC_GSS_KRB5
  1413. help
  1414. This option enables support in your system's NFS server for
  1415. version 4 of the NFS protocol (RFC 3530).
  1416. To export files using NFSv4, you need to install additional user
  1417. space programs which can be found in the Linux nfs-utils package,
  1418. available from http://linux-nfs.org/.
  1419. If unsure, say N.
  1420. config LOCKD
  1421. tristate
  1422. config LOCKD_V4
  1423. bool
  1424. depends on NFSD_V3 || NFS_V3
  1425. default y
  1426. config EXPORTFS
  1427. tristate
  1428. config NFS_ACL_SUPPORT
  1429. tristate
  1430. select FS_POSIX_ACL
  1431. config NFS_COMMON
  1432. bool
  1433. depends on NFSD || NFS_FS
  1434. default y
  1435. config SUNRPC
  1436. tristate
  1437. config SUNRPC_GSS
  1438. tristate
  1439. config SUNRPC_XPRT_RDMA
  1440. tristate
  1441. depends on SUNRPC && INFINIBAND && EXPERIMENTAL
  1442. default SUNRPC && INFINIBAND
  1443. help
  1444. This option enables an RPC client transport capability that
  1445. allows the NFS client to mount servers via an RDMA-enabled
  1446. transport.
  1447. To compile RPC client RDMA transport support as a module,
  1448. choose M here: the module will be called xprtrdma.
  1449. If unsure, say N.
  1450. config SUNRPC_REGISTER_V4
  1451. bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
  1452. depends on SUNRPC && EXPERIMENTAL
  1453. default n
  1454. help
  1455. Sun added support for registering RPC services at an IPv6
  1456. address by creating two new versions of the rpcbind protocol
  1457. (RFC 1833).
  1458. This option enables support in the kernel RPC server for
  1459. registering kernel RPC services via version 4 of the rpcbind
  1460. protocol. If you enable this option, you must run a portmapper
  1461. daemon that supports rpcbind protocol version 4.
  1462. Serving NFS over IPv6 from knfsd (the kernel's NFS server)
  1463. requires that you enable this option and use a portmapper that
  1464. supports rpcbind version 4.
  1465. If unsure, say N to get traditional behavior (register kernel
  1466. RPC services using only rpcbind version 2). Distributions
  1467. using the legacy Linux portmapper daemon must say N here.
  1468. config RPCSEC_GSS_KRB5
  1469. tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
  1470. depends on SUNRPC && EXPERIMENTAL
  1471. select SUNRPC_GSS
  1472. select CRYPTO
  1473. select CRYPTO_MD5
  1474. select CRYPTO_DES
  1475. select CRYPTO_CBC
  1476. help
  1477. Choose Y here to enable Secure RPC using the Kerberos version 5
  1478. GSS-API mechanism (RFC 1964).
  1479. Secure RPC calls with Kerberos require an auxiliary user-space
  1480. daemon which may be found in the Linux nfs-utils package
  1481. available from http://linux-nfs.org/. In addition, user-space
  1482. Kerberos support should be installed.
  1483. If unsure, say N.
  1484. config RPCSEC_GSS_SPKM3
  1485. tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
  1486. depends on SUNRPC && EXPERIMENTAL
  1487. select SUNRPC_GSS
  1488. select CRYPTO
  1489. select CRYPTO_MD5
  1490. select CRYPTO_DES
  1491. select CRYPTO_CAST5
  1492. select CRYPTO_CBC
  1493. help
  1494. Choose Y here to enable Secure RPC using the SPKM3 public key
  1495. GSS-API mechansim (RFC 2025).
  1496. Secure RPC calls with SPKM3 require an auxiliary userspace
  1497. daemon which may be found in the Linux nfs-utils package
  1498. available from http://linux-nfs.org/.
  1499. If unsure, say N.
  1500. config SMB_FS
  1501. tristate "SMB file system support (OBSOLETE, please use CIFS)"
  1502. depends on INET
  1503. select NLS
  1504. help
  1505. SMB (Server Message Block) is the protocol Windows for Workgroups
  1506. (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
  1507. files and printers over local networks. Saying Y here allows you to
  1508. mount their file systems (often called "shares" in this context) and
  1509. access them just like any other Unix directory. Currently, this
  1510. works only if the Windows machines use TCP/IP as the underlying
  1511. transport protocol, and not NetBEUI. For details, read
  1512. <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
  1513. available from <http://www.tldp.org/docs.html#howto>.
  1514. Note: if you just want your box to act as an SMB *server* and make
  1515. files and printing services available to Windows clients (which need
  1516. to have a TCP/IP stack), you don't need to say Y here; you can use
  1517. the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
  1518. for that.
  1519. General information about how to connect Linux, Windows machines and
  1520. Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
  1521. To compile the SMB support as a module, choose M here:
  1522. the module will be called smbfs. Most people say N, however.
  1523. config SMB_NLS_DEFAULT
  1524. bool "Use a default NLS"
  1525. depends on SMB_FS
  1526. help
  1527. Enabling this will make smbfs use nls translations by default. You
  1528. need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
  1529. settings and you need to give the default nls for the SMB server as
  1530. CONFIG_SMB_NLS_REMOTE.
  1531. The nls settings can be changed at mount time, if your smbmount
  1532. supports that, using the codepage and iocharset parameters.
  1533. smbmount from samba 2.2.0 or later supports this.
  1534. config SMB_NLS_REMOTE
  1535. string "Default Remote NLS Option"
  1536. depends on SMB_NLS_DEFAULT
  1537. default "cp437"
  1538. help
  1539. This setting allows you to specify a default value for which
  1540. codepage the server uses. If this field is left blank no
  1541. translations will be done by default. The local codepage/charset
  1542. default to CONFIG_NLS_DEFAULT.
  1543. The nls settings can be changed at mount time, if your smbmount
  1544. supports that, using the codepage and iocharset parameters.
  1545. smbmount from samba 2.2.0 or later supports this.
  1546. config CIFS
  1547. tristate "CIFS support (advanced network filesystem, SMBFS successor)"
  1548. depends on INET
  1549. select NLS
  1550. help
  1551. This is the client VFS module for the Common Internet File System
  1552. (CIFS) protocol which is the successor to the Server Message Block
  1553. (SMB) protocol, the native file sharing mechanism for most early
  1554. PC operating systems. The CIFS protocol is fully supported by
  1555. file servers such as Windows 2000 (including Windows 2003, NT 4
  1556. and Windows XP) as well by Samba (which provides excellent CIFS
  1557. server support for Linux and many other operating systems). Limited
  1558. support for OS/2 and Windows ME and similar servers is provided as
  1559. well.
  1560. The cifs module provides an advanced network file system
  1561. client for mounting to CIFS compliant servers. It includes
  1562. support for DFS (hierarchical name space), secure per-user
  1563. session establishment via Kerberos or NTLM or NTLMv2,
  1564. safe distributed caching (oplock), optional packet
  1565. signing, Unicode and other internationalization improvements.
  1566. If you need to mount to Samba or Windows from this machine, say Y.
  1567. config CIFS_STATS
  1568. bool "CIFS statistics"
  1569. depends on CIFS
  1570. help
  1571. Enabling this option will cause statistics for each server share
  1572. mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
  1573. config CIFS_STATS2
  1574. bool "Extended statistics"
  1575. depends on CIFS_STATS
  1576. help
  1577. Enabling this option will allow more detailed statistics on SMB
  1578. request timing to be displayed in /proc/fs/cifs/DebugData and also
  1579. allow optional logging of slow responses to dmesg (depending on the
  1580. value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
  1581. These additional statistics may have a minor effect on performance
  1582. and memory utilization.
  1583. Unless you are a developer or are doing network performance analysis
  1584. or tuning, say N.
  1585. config CIFS_WEAK_PW_HASH
  1586. bool "Support legacy servers which use weaker LANMAN security"
  1587. depends on CIFS
  1588. help
  1589. Modern CIFS servers including Samba and most Windows versions
  1590. (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
  1591. security mechanisms. These hash the password more securely
  1592. than the mechanisms used in the older LANMAN version of the
  1593. SMB protocol but LANMAN based authentication is needed to
  1594. establish sessions with some old SMB servers.
  1595. Enabling this option allows the cifs module to mount to older
  1596. LANMAN based servers such as OS/2 and Windows 95, but such
  1597. mounts may be less secure than mounts using NTLM or more recent
  1598. security mechanisms if you are on a public network. Unless you
  1599. have a need to access old SMB servers (and are on a private
  1600. network) you probably want to say N. Even if this support
  1601. is enabled in the kernel build, LANMAN authentication will not be
  1602. used automatically. At runtime LANMAN mounts are disabled but
  1603. can be set to required (or optional) either in
  1604. /proc/fs/cifs (see fs/cifs/README for more detail) or via an
  1605. option on the mount command. This support is disabled by
  1606. default in order to reduce the possibility of a downgrade
  1607. attack.
  1608. If unsure, say N.
  1609. config CIFS_UPCALL
  1610. bool "Kerberos/SPNEGO advanced session setup"
  1611. depends on CIFS && KEYS
  1612. help
  1613. Enables an upcall mechanism for CIFS which accesses
  1614. userspace helper utilities to provide SPNEGO packaged (RFC 4178)
  1615. Kerberos tickets which are needed to mount to certain secure servers
  1616. (for which more secure Kerberos authentication is required). If
  1617. unsure, say N.
  1618. config CIFS_XATTR
  1619. bool "CIFS extended attributes"
  1620. depends on CIFS
  1621. help
  1622. Extended attributes are name:value pairs associated with inodes by
  1623. the kernel or by users (see the attr(5) manual page, or visit
  1624. <http://acl.bestbits.at/> for details). CIFS maps the name of
  1625. extended attributes beginning with the user namespace prefix
  1626. to SMB/CIFS EAs. EAs are stored on Windows servers without the
  1627. user namespace prefix, but their names are seen by Linux cifs clients
  1628. prefaced by the user namespace prefix. The system namespace
  1629. (used by some filesystems to store ACLs) is not supported at
  1630. this time.
  1631. If unsure, say N.
  1632. config CIFS_POSIX
  1633. bool "CIFS POSIX Extensions"
  1634. depends on CIFS_XATTR
  1635. help
  1636. Enabling this option will cause the cifs client to attempt to
  1637. negotiate a newer dialect with servers, such as Samba 3.0.5
  1638. or later, that optionally can handle more POSIX like (rather
  1639. than Windows like) file behavior. It also enables
  1640. support for POSIX ACLs (getfacl and setfacl) to servers
  1641. (such as Samba 3.10 and later) which can negotiate
  1642. CIFS POSIX ACL support. If unsure, say N.
  1643. config CIFS_DEBUG2
  1644. bool "Enable additional CIFS debugging routines"
  1645. depends on CIFS
  1646. help
  1647. Enabling this option adds a few more debugging routines
  1648. to the cifs code which slightly increases the size of
  1649. the cifs module and can cause additional logging of debug
  1650. messages in some error paths, slowing performance. This
  1651. option can be turned off unless you are debugging
  1652. cifs problems. If unsure, say N.
  1653. config CIFS_EXPERIMENTAL
  1654. bool "CIFS Experimental Features (EXPERIMENTAL)"
  1655. depends on CIFS && EXPERIMENTAL
  1656. help
  1657. Enables cifs features under testing. These features are
  1658. experimental and currently include DFS support and directory
  1659. change notification ie fcntl(F_DNOTIFY), as well as the upcall
  1660. mechanism which will be used for Kerberos session negotiation
  1661. and uid remapping. Some of these features also may depend on
  1662. setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
  1663. (which is disabled by default). See the file fs/cifs/README
  1664. for more details. If unsure, say N.
  1665. config CIFS_DFS_UPCALL
  1666. bool "DFS feature support (EXPERIMENTAL)"
  1667. depends on CIFS_EXPERIMENTAL
  1668. depends on KEYS
  1669. help
  1670. Enables an upcall mechanism for CIFS which contacts userspace
  1671. helper utilities to provide server name resolution (host names to
  1672. IP addresses) which is needed for implicit mounts of DFS junction
  1673. points. If unsure, say N.
  1674. config NCP_FS
  1675. tristate "NCP file system support (to mount NetWare volumes)"
  1676. depends on IPX!=n || INET
  1677. help
  1678. NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
  1679. used by Novell NetWare clients to talk to file servers. It is to
  1680. IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
  1681. to mount NetWare file server volumes and to access them just like
  1682. any other Unix directory. For details, please read the file
  1683. <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
  1684. the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
  1685. You do not have to say Y here if you want your Linux box to act as a
  1686. file *server* for Novell NetWare clients.
  1687. General information about how to connect Linux, Windows machines and
  1688. Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
  1689. To compile this as a module, choose M here: the module will be called
  1690. ncpfs. Say N unless you are connected to a Novell network.
  1691. source "fs/ncpfs/Kconfig"
  1692. config CODA_FS
  1693. tristate "Coda file system support (advanced network fs)"
  1694. depends on INET
  1695. help
  1696. Coda is an advanced network file system, similar to NFS in that it
  1697. enables you to mount file systems of a remote server and access them
  1698. with regular Unix commands as if they were sitting on your hard
  1699. disk. Coda has several advantages over NFS: support for
  1700. disconnected operation (e.g. for laptops), read/write server
  1701. replication, security model for authentication and encryption,
  1702. persistent client caches and write back caching.
  1703. If you say Y here, your Linux box will be able to act as a Coda
  1704. *client*. You will need user level code as well, both for the
  1705. client and server. Servers are currently user level, i.e. they need
  1706. no kernel support. Please read
  1707. <file:Documentation/filesystems/coda.txt> and check out the Coda
  1708. home page <http://www.coda.cs.cmu.edu/>.
  1709. To compile the coda client support as a module, choose M here: the
  1710. module will be called coda.
  1711. config AFS_FS
  1712. tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
  1713. depends on INET && EXPERIMENTAL
  1714. select AF_RXRPC
  1715. help
  1716. If you say Y here, you will get an experimental Andrew File System
  1717. driver. It currently only supports unsecured read-only AFS access.
  1718. See <file:Documentation/filesystems/afs.txt> for more information.
  1719. If unsure, say N.
  1720. config AFS_DEBUG
  1721. bool "AFS dynamic debugging"
  1722. depends on AFS_FS
  1723. help
  1724. Say Y here to make runtime controllable debugging messages appear.
  1725. See <file:Documentation/filesystems/afs.txt> for more information.
  1726. If unsure, say N.
  1727. config 9P_FS
  1728. tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
  1729. depends on INET && NET_9P && EXPERIMENTAL
  1730. help
  1731. If you say Y here, you will get experimental support for
  1732. Plan 9 resource sharing via the 9P2000 protocol.
  1733. See <http://v9fs.sf.net> for more information.
  1734. If unsure, say N.
  1735. endif # NETWORK_FILESYSTEMS
  1736. if BLOCK
  1737. menu "Partition Types"
  1738. source "fs/partitions/Kconfig"
  1739. endmenu
  1740. endif
  1741. source "fs/nls/Kconfig"
  1742. source "fs/dlm/Kconfig"
  1743. endmenu