pcm3008.c 4.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204
  1. /*
  2. * ALSA Soc PCM3008 codec support
  3. *
  4. * Author: Hugo Villeneuve
  5. * Copyright (C) 2008 Lyrtech inc
  6. *
  7. * Based on AC97 Soc codec, original copyright follow:
  8. * Copyright 2005 Wolfson Microelectronics PLC.
  9. *
  10. * This program is free software; you can redistribute it and/or modify it
  11. * under the terms of the GNU General Public License as published by the
  12. * Free Software Foundation; either version 2 of the License, or (at your
  13. * option) any later version.
  14. *
  15. * Generic PCM3008 support.
  16. */
  17. #include <linux/init.h>
  18. #include <linux/kernel.h>
  19. #include <linux/device.h>
  20. #include <linux/gpio.h>
  21. #include <linux/slab.h>
  22. #include <sound/core.h>
  23. #include <sound/pcm.h>
  24. #include <sound/initval.h>
  25. #include <sound/soc.h>
  26. #include "pcm3008.h"
  27. #define PCM3008_VERSION "0.2"
  28. #define PCM3008_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
  29. SNDRV_PCM_RATE_48000)
  30. struct snd_soc_dai pcm3008_dai = {
  31. .name = "PCM3008 HiFi",
  32. .playback = {
  33. .stream_name = "PCM3008 Playback",
  34. .channels_min = 1,
  35. .channels_max = 2,
  36. .rates = PCM3008_RATES,
  37. .formats = SNDRV_PCM_FMTBIT_S16_LE,
  38. },
  39. .capture = {
  40. .stream_name = "PCM3008 Capture",
  41. .channels_min = 1,
  42. .channels_max = 2,
  43. .rates = PCM3008_RATES,
  44. .formats = SNDRV_PCM_FMTBIT_S16_LE,
  45. },
  46. };
  47. EXPORT_SYMBOL_GPL(pcm3008_dai);
  48. static void pcm3008_gpio_free(struct pcm3008_setup_data *setup)
  49. {
  50. gpio_free(setup->dem0_pin);
  51. gpio_free(setup->dem1_pin);
  52. gpio_free(setup->pdad_pin);
  53. gpio_free(setup->pdda_pin);
  54. }
  55. static int pcm3008_soc_probe(struct platform_device *pdev)
  56. {
  57. struct snd_soc_device *socdev = platform_get_drvdata(pdev);
  58. struct snd_soc_codec *codec;
  59. struct pcm3008_setup_data *setup = socdev->codec_data;
  60. int ret = 0;
  61. printk(KERN_INFO "PCM3008 SoC Audio Codec %s\n", PCM3008_VERSION);
  62. socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
  63. if (!socdev->card->codec)
  64. return -ENOMEM;
  65. codec = socdev->card->codec;
  66. mutex_init(&codec->mutex);
  67. codec->name = "PCM3008";
  68. codec->owner = THIS_MODULE;
  69. codec->dai = &pcm3008_dai;
  70. codec->num_dai = 1;
  71. codec->write = NULL;
  72. codec->read = NULL;
  73. INIT_LIST_HEAD(&codec->dapm_widgets);
  74. INIT_LIST_HEAD(&codec->dapm_paths);
  75. /* Register PCMs. */
  76. ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
  77. if (ret < 0) {
  78. printk(KERN_ERR "pcm3008: failed to create pcms\n");
  79. goto pcm_err;
  80. }
  81. /* DEM1 DEM0 DE-EMPHASIS_MODE
  82. * Low Low De-emphasis 44.1 kHz ON
  83. * Low High De-emphasis OFF
  84. * High Low De-emphasis 48 kHz ON
  85. * High High De-emphasis 32 kHz ON
  86. */
  87. /* Configure DEM0 GPIO (turning OFF DAC De-emphasis). */
  88. ret = gpio_request(setup->dem0_pin, "codec_dem0");
  89. if (ret == 0)
  90. ret = gpio_direction_output(setup->dem0_pin, 1);
  91. if (ret != 0)
  92. goto gpio_err;
  93. /* Configure DEM1 GPIO (turning OFF DAC De-emphasis). */
  94. ret = gpio_request(setup->dem1_pin, "codec_dem1");
  95. if (ret == 0)
  96. ret = gpio_direction_output(setup->dem1_pin, 0);
  97. if (ret != 0)
  98. goto gpio_err;
  99. /* Configure PDAD GPIO. */
  100. ret = gpio_request(setup->pdad_pin, "codec_pdad");
  101. if (ret == 0)
  102. ret = gpio_direction_output(setup->pdad_pin, 1);
  103. if (ret != 0)
  104. goto gpio_err;
  105. /* Configure PDDA GPIO. */
  106. ret = gpio_request(setup->pdda_pin, "codec_pdda");
  107. if (ret == 0)
  108. ret = gpio_direction_output(setup->pdda_pin, 1);
  109. if (ret != 0)
  110. goto gpio_err;
  111. return ret;
  112. gpio_err:
  113. pcm3008_gpio_free(setup);
  114. pcm_err:
  115. kfree(socdev->card->codec);
  116. return ret;
  117. }
  118. static int pcm3008_soc_remove(struct platform_device *pdev)
  119. {
  120. struct snd_soc_device *socdev = platform_get_drvdata(pdev);
  121. struct snd_soc_codec *codec = socdev->card->codec;
  122. struct pcm3008_setup_data *setup = socdev->codec_data;
  123. if (!codec)
  124. return 0;
  125. pcm3008_gpio_free(setup);
  126. snd_soc_free_pcms(socdev);
  127. kfree(socdev->card->codec);
  128. return 0;
  129. }
  130. #ifdef CONFIG_PM
  131. static int pcm3008_soc_suspend(struct platform_device *pdev, pm_message_t msg)
  132. {
  133. struct snd_soc_device *socdev = platform_get_drvdata(pdev);
  134. struct pcm3008_setup_data *setup = socdev->codec_data;
  135. gpio_set_value(setup->pdad_pin, 0);
  136. gpio_set_value(setup->pdda_pin, 0);
  137. return 0;
  138. }
  139. static int pcm3008_soc_resume(struct platform_device *pdev)
  140. {
  141. struct snd_soc_device *socdev = platform_get_drvdata(pdev);
  142. struct pcm3008_setup_data *setup = socdev->codec_data;
  143. gpio_set_value(setup->pdad_pin, 1);
  144. gpio_set_value(setup->pdda_pin, 1);
  145. return 0;
  146. }
  147. #else
  148. #define pcm3008_soc_suspend NULL
  149. #define pcm3008_soc_resume NULL
  150. #endif
  151. struct snd_soc_codec_device soc_codec_dev_pcm3008 = {
  152. .probe = pcm3008_soc_probe,
  153. .remove = pcm3008_soc_remove,
  154. .suspend = pcm3008_soc_suspend,
  155. .resume = pcm3008_soc_resume,
  156. };
  157. EXPORT_SYMBOL_GPL(soc_codec_dev_pcm3008);
  158. static int __init pcm3008_init(void)
  159. {
  160. return snd_soc_register_dai(&pcm3008_dai);
  161. }
  162. module_init(pcm3008_init);
  163. static void __exit pcm3008_exit(void)
  164. {
  165. snd_soc_unregister_dai(&pcm3008_dai);
  166. }
  167. module_exit(pcm3008_exit);
  168. MODULE_DESCRIPTION("Soc PCM3008 driver");
  169. MODULE_AUTHOR("Hugo Villeneuve");
  170. MODULE_LICENSE("GPL");