iwl-core.c 41 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465
  1. /******************************************************************************
  2. *
  3. * GPL LICENSE SUMMARY
  4. *
  5. * Copyright(c) 2008 Intel Corporation. All rights reserved.
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of version 2 of the GNU General Public License as
  9. * published by the Free Software Foundation.
  10. *
  11. * This program is distributed in the hope that it will be useful, but
  12. * WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  14. * General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  19. * USA
  20. *
  21. * The full GNU General Public License is included in this distribution
  22. * in the file called LICENSE.GPL.
  23. *
  24. * Contact Information:
  25. * Tomas Winkler <tomas.winkler@intel.com>
  26. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27. *****************************************************************************/
  28. #include <linux/kernel.h>
  29. #include <linux/module.h>
  30. #include <net/mac80211.h>
  31. struct iwl_priv; /* FIXME: remove */
  32. #include "iwl-debug.h"
  33. #include "iwl-eeprom.h"
  34. #include "iwl-dev.h" /* FIXME: remove */
  35. #include "iwl-core.h"
  36. #include "iwl-io.h"
  37. #include "iwl-rfkill.h"
  38. #include "iwl-power.h"
  39. MODULE_DESCRIPTION("iwl core");
  40. MODULE_VERSION(IWLWIFI_VERSION);
  41. MODULE_AUTHOR(DRV_COPYRIGHT);
  42. MODULE_LICENSE("GPL");
  43. #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
  44. [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
  45. IWL_RATE_SISO_##s##M_PLCP, \
  46. IWL_RATE_MIMO2_##s##M_PLCP,\
  47. IWL_RATE_MIMO3_##s##M_PLCP,\
  48. IWL_RATE_##r##M_IEEE, \
  49. IWL_RATE_##ip##M_INDEX, \
  50. IWL_RATE_##in##M_INDEX, \
  51. IWL_RATE_##rp##M_INDEX, \
  52. IWL_RATE_##rn##M_INDEX, \
  53. IWL_RATE_##pp##M_INDEX, \
  54. IWL_RATE_##np##M_INDEX }
  55. /*
  56. * Parameter order:
  57. * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
  58. *
  59. * If there isn't a valid next or previous rate then INV is used which
  60. * maps to IWL_RATE_INVALID
  61. *
  62. */
  63. const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
  64. IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
  65. IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
  66. IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
  67. IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
  68. IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
  69. IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
  70. IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
  71. IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
  72. IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
  73. IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
  74. IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
  75. IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  76. IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
  77. /* FIXME:RS: ^^ should be INV (legacy) */
  78. };
  79. EXPORT_SYMBOL(iwl_rates);
  80. /**
  81. * translate ucode response to mac80211 tx status control values
  82. */
  83. void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
  84. struct ieee80211_tx_info *control)
  85. {
  86. int rate_index;
  87. control->antenna_sel_tx =
  88. ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
  89. if (rate_n_flags & RATE_MCS_HT_MSK)
  90. control->flags |= IEEE80211_TX_CTL_OFDM_HT;
  91. if (rate_n_flags & RATE_MCS_GF_MSK)
  92. control->flags |= IEEE80211_TX_CTL_GREEN_FIELD;
  93. if (rate_n_flags & RATE_MCS_FAT_MSK)
  94. control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH;
  95. if (rate_n_flags & RATE_MCS_DUP_MSK)
  96. control->flags |= IEEE80211_TX_CTL_DUP_DATA;
  97. if (rate_n_flags & RATE_MCS_SGI_MSK)
  98. control->flags |= IEEE80211_TX_CTL_SHORT_GI;
  99. rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
  100. if (control->band == IEEE80211_BAND_5GHZ)
  101. rate_index -= IWL_FIRST_OFDM_RATE;
  102. control->tx_rate_idx = rate_index;
  103. }
  104. EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
  105. int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
  106. {
  107. int idx = 0;
  108. /* HT rate format */
  109. if (rate_n_flags & RATE_MCS_HT_MSK) {
  110. idx = (rate_n_flags & 0xff);
  111. if (idx >= IWL_RATE_MIMO2_6M_PLCP)
  112. idx = idx - IWL_RATE_MIMO2_6M_PLCP;
  113. idx += IWL_FIRST_OFDM_RATE;
  114. /* skip 9M not supported in ht*/
  115. if (idx >= IWL_RATE_9M_INDEX)
  116. idx += 1;
  117. if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
  118. return idx;
  119. /* legacy rate format, search for match in table */
  120. } else {
  121. for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
  122. if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
  123. return idx;
  124. }
  125. return -1;
  126. }
  127. EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
  128. const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
  129. EXPORT_SYMBOL(iwl_bcast_addr);
  130. /* This function both allocates and initializes hw and priv. */
  131. struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
  132. struct ieee80211_ops *hw_ops)
  133. {
  134. struct iwl_priv *priv;
  135. /* mac80211 allocates memory for this device instance, including
  136. * space for this driver's private structure */
  137. struct ieee80211_hw *hw =
  138. ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
  139. if (hw == NULL) {
  140. IWL_ERROR("Can not allocate network device\n");
  141. goto out;
  142. }
  143. priv = hw->priv;
  144. priv->hw = hw;
  145. out:
  146. return hw;
  147. }
  148. EXPORT_SYMBOL(iwl_alloc_all);
  149. void iwl_hw_detect(struct iwl_priv *priv)
  150. {
  151. priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
  152. priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
  153. pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
  154. }
  155. EXPORT_SYMBOL(iwl_hw_detect);
  156. /* Tell nic where to find the "keep warm" buffer */
  157. int iwl_kw_init(struct iwl_priv *priv)
  158. {
  159. unsigned long flags;
  160. int ret;
  161. spin_lock_irqsave(&priv->lock, flags);
  162. ret = iwl_grab_nic_access(priv);
  163. if (ret)
  164. goto out;
  165. iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG,
  166. priv->kw.dma_addr >> 4);
  167. iwl_release_nic_access(priv);
  168. out:
  169. spin_unlock_irqrestore(&priv->lock, flags);
  170. return ret;
  171. }
  172. int iwl_kw_alloc(struct iwl_priv *priv)
  173. {
  174. struct pci_dev *dev = priv->pci_dev;
  175. struct iwl_kw *kw = &priv->kw;
  176. kw->size = IWL_KW_SIZE;
  177. kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr);
  178. if (!kw->v_addr)
  179. return -ENOMEM;
  180. return 0;
  181. }
  182. /**
  183. * iwl_kw_free - Free the "keep warm" buffer
  184. */
  185. void iwl_kw_free(struct iwl_priv *priv)
  186. {
  187. struct pci_dev *dev = priv->pci_dev;
  188. struct iwl_kw *kw = &priv->kw;
  189. if (kw->v_addr) {
  190. pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr);
  191. memset(kw, 0, sizeof(*kw));
  192. }
  193. }
  194. int iwl_hw_nic_init(struct iwl_priv *priv)
  195. {
  196. unsigned long flags;
  197. struct iwl_rx_queue *rxq = &priv->rxq;
  198. int ret;
  199. /* nic_init */
  200. spin_lock_irqsave(&priv->lock, flags);
  201. priv->cfg->ops->lib->apm_ops.init(priv);
  202. iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
  203. spin_unlock_irqrestore(&priv->lock, flags);
  204. ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
  205. priv->cfg->ops->lib->apm_ops.config(priv);
  206. /* Allocate the RX queue, or reset if it is already allocated */
  207. if (!rxq->bd) {
  208. ret = iwl_rx_queue_alloc(priv);
  209. if (ret) {
  210. IWL_ERROR("Unable to initialize Rx queue\n");
  211. return -ENOMEM;
  212. }
  213. } else
  214. iwl_rx_queue_reset(priv, rxq);
  215. iwl_rx_replenish(priv);
  216. iwl_rx_init(priv, rxq);
  217. spin_lock_irqsave(&priv->lock, flags);
  218. rxq->need_update = 1;
  219. iwl_rx_queue_update_write_ptr(priv, rxq);
  220. spin_unlock_irqrestore(&priv->lock, flags);
  221. /* Allocate and init all Tx and Command queues */
  222. ret = iwl_txq_ctx_reset(priv);
  223. if (ret)
  224. return ret;
  225. set_bit(STATUS_INIT, &priv->status);
  226. return 0;
  227. }
  228. EXPORT_SYMBOL(iwl_hw_nic_init);
  229. /**
  230. * iwl_clear_stations_table - Clear the driver's station table
  231. *
  232. * NOTE: This does not clear or otherwise alter the device's station table.
  233. */
  234. void iwl_clear_stations_table(struct iwl_priv *priv)
  235. {
  236. unsigned long flags;
  237. spin_lock_irqsave(&priv->sta_lock, flags);
  238. if (iwl_is_alive(priv) &&
  239. !test_bit(STATUS_EXIT_PENDING, &priv->status) &&
  240. iwl_send_cmd_pdu_async(priv, REPLY_REMOVE_ALL_STA, 0, NULL, NULL))
  241. IWL_ERROR("Couldn't clear the station table\n");
  242. priv->num_stations = 0;
  243. memset(priv->stations, 0, sizeof(priv->stations));
  244. spin_unlock_irqrestore(&priv->sta_lock, flags);
  245. }
  246. EXPORT_SYMBOL(iwl_clear_stations_table);
  247. void iwl_reset_qos(struct iwl_priv *priv)
  248. {
  249. u16 cw_min = 15;
  250. u16 cw_max = 1023;
  251. u8 aifs = 2;
  252. u8 is_legacy = 0;
  253. unsigned long flags;
  254. int i;
  255. spin_lock_irqsave(&priv->lock, flags);
  256. priv->qos_data.qos_active = 0;
  257. if (priv->iw_mode == NL80211_IFTYPE_ADHOC) {
  258. if (priv->qos_data.qos_enable)
  259. priv->qos_data.qos_active = 1;
  260. if (!(priv->active_rate & 0xfff0)) {
  261. cw_min = 31;
  262. is_legacy = 1;
  263. }
  264. } else if (priv->iw_mode == NL80211_IFTYPE_AP) {
  265. if (priv->qos_data.qos_enable)
  266. priv->qos_data.qos_active = 1;
  267. } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
  268. cw_min = 31;
  269. is_legacy = 1;
  270. }
  271. if (priv->qos_data.qos_active)
  272. aifs = 3;
  273. priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
  274. priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
  275. priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
  276. priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
  277. priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
  278. if (priv->qos_data.qos_active) {
  279. i = 1;
  280. priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
  281. priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
  282. priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
  283. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  284. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  285. i = 2;
  286. priv->qos_data.def_qos_parm.ac[i].cw_min =
  287. cpu_to_le16((cw_min + 1) / 2 - 1);
  288. priv->qos_data.def_qos_parm.ac[i].cw_max =
  289. cpu_to_le16(cw_max);
  290. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  291. if (is_legacy)
  292. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  293. cpu_to_le16(6016);
  294. else
  295. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  296. cpu_to_le16(3008);
  297. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  298. i = 3;
  299. priv->qos_data.def_qos_parm.ac[i].cw_min =
  300. cpu_to_le16((cw_min + 1) / 4 - 1);
  301. priv->qos_data.def_qos_parm.ac[i].cw_max =
  302. cpu_to_le16((cw_max + 1) / 2 - 1);
  303. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  304. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  305. if (is_legacy)
  306. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  307. cpu_to_le16(3264);
  308. else
  309. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  310. cpu_to_le16(1504);
  311. } else {
  312. for (i = 1; i < 4; i++) {
  313. priv->qos_data.def_qos_parm.ac[i].cw_min =
  314. cpu_to_le16(cw_min);
  315. priv->qos_data.def_qos_parm.ac[i].cw_max =
  316. cpu_to_le16(cw_max);
  317. priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
  318. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  319. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  320. }
  321. }
  322. IWL_DEBUG_QOS("set QoS to default \n");
  323. spin_unlock_irqrestore(&priv->lock, flags);
  324. }
  325. EXPORT_SYMBOL(iwl_reset_qos);
  326. #define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */
  327. #define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */
  328. static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
  329. struct ieee80211_ht_info *ht_info,
  330. enum ieee80211_band band)
  331. {
  332. u16 max_bit_rate = 0;
  333. u8 rx_chains_num = priv->hw_params.rx_chains_num;
  334. u8 tx_chains_num = priv->hw_params.tx_chains_num;
  335. ht_info->cap = 0;
  336. memset(ht_info->supp_mcs_set, 0, 16);
  337. ht_info->ht_supported = 1;
  338. ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
  339. ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
  340. ht_info->cap |= (u16)(IEEE80211_HT_CAP_SM_PS &
  341. (WLAN_HT_CAP_SM_PS_DISABLED << 2));
  342. max_bit_rate = MAX_BIT_RATE_20_MHZ;
  343. if (priv->hw_params.fat_channel & BIT(band)) {
  344. ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
  345. ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
  346. ht_info->supp_mcs_set[4] = 0x01;
  347. max_bit_rate = MAX_BIT_RATE_40_MHZ;
  348. }
  349. if (priv->cfg->mod_params->amsdu_size_8K)
  350. ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
  351. ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
  352. ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
  353. ht_info->supp_mcs_set[0] = 0xFF;
  354. if (rx_chains_num >= 2)
  355. ht_info->supp_mcs_set[1] = 0xFF;
  356. if (rx_chains_num >= 3)
  357. ht_info->supp_mcs_set[2] = 0xFF;
  358. /* Highest supported Rx data rate */
  359. max_bit_rate *= rx_chains_num;
  360. ht_info->supp_mcs_set[10] = (u8)(max_bit_rate & 0x00FF);
  361. ht_info->supp_mcs_set[11] = (u8)((max_bit_rate & 0xFF00) >> 8);
  362. /* Tx MCS capabilities */
  363. ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
  364. if (tx_chains_num != rx_chains_num) {
  365. ht_info->supp_mcs_set[12] |= IEEE80211_HT_CAP_MCS_TX_RX_DIFF;
  366. ht_info->supp_mcs_set[12] |= ((tx_chains_num - 1) << 2);
  367. }
  368. }
  369. static void iwlcore_init_hw_rates(struct iwl_priv *priv,
  370. struct ieee80211_rate *rates)
  371. {
  372. int i;
  373. for (i = 0; i < IWL_RATE_COUNT; i++) {
  374. rates[i].bitrate = iwl_rates[i].ieee * 5;
  375. rates[i].hw_value = i; /* Rate scaling will work on indexes */
  376. rates[i].hw_value_short = i;
  377. rates[i].flags = 0;
  378. if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
  379. /*
  380. * If CCK != 1M then set short preamble rate flag.
  381. */
  382. rates[i].flags |=
  383. (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
  384. 0 : IEEE80211_RATE_SHORT_PREAMBLE;
  385. }
  386. }
  387. }
  388. /**
  389. * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
  390. */
  391. static int iwlcore_init_geos(struct iwl_priv *priv)
  392. {
  393. struct iwl_channel_info *ch;
  394. struct ieee80211_supported_band *sband;
  395. struct ieee80211_channel *channels;
  396. struct ieee80211_channel *geo_ch;
  397. struct ieee80211_rate *rates;
  398. int i = 0;
  399. if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
  400. priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
  401. IWL_DEBUG_INFO("Geography modes already initialized.\n");
  402. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  403. return 0;
  404. }
  405. channels = kzalloc(sizeof(struct ieee80211_channel) *
  406. priv->channel_count, GFP_KERNEL);
  407. if (!channels)
  408. return -ENOMEM;
  409. rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
  410. GFP_KERNEL);
  411. if (!rates) {
  412. kfree(channels);
  413. return -ENOMEM;
  414. }
  415. /* 5.2GHz channels start after the 2.4GHz channels */
  416. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  417. sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
  418. /* just OFDM */
  419. sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
  420. sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
  421. if (priv->cfg->sku & IWL_SKU_N)
  422. iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
  423. IEEE80211_BAND_5GHZ);
  424. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  425. sband->channels = channels;
  426. /* OFDM & CCK */
  427. sband->bitrates = rates;
  428. sband->n_bitrates = IWL_RATE_COUNT;
  429. if (priv->cfg->sku & IWL_SKU_N)
  430. iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
  431. IEEE80211_BAND_2GHZ);
  432. priv->ieee_channels = channels;
  433. priv->ieee_rates = rates;
  434. iwlcore_init_hw_rates(priv, rates);
  435. for (i = 0; i < priv->channel_count; i++) {
  436. ch = &priv->channel_info[i];
  437. /* FIXME: might be removed if scan is OK */
  438. if (!is_channel_valid(ch))
  439. continue;
  440. if (is_channel_a_band(ch))
  441. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  442. else
  443. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  444. geo_ch = &sband->channels[sband->n_channels++];
  445. geo_ch->center_freq =
  446. ieee80211_channel_to_frequency(ch->channel);
  447. geo_ch->max_power = ch->max_power_avg;
  448. geo_ch->max_antenna_gain = 0xff;
  449. geo_ch->hw_value = ch->channel;
  450. if (is_channel_valid(ch)) {
  451. if (!(ch->flags & EEPROM_CHANNEL_IBSS))
  452. geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
  453. if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
  454. geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
  455. if (ch->flags & EEPROM_CHANNEL_RADAR)
  456. geo_ch->flags |= IEEE80211_CHAN_RADAR;
  457. geo_ch->flags |= ch->fat_extension_channel;
  458. if (ch->max_power_avg > priv->tx_power_channel_lmt)
  459. priv->tx_power_channel_lmt = ch->max_power_avg;
  460. } else {
  461. geo_ch->flags |= IEEE80211_CHAN_DISABLED;
  462. }
  463. /* Save flags for reg domain usage */
  464. geo_ch->orig_flags = geo_ch->flags;
  465. IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
  466. ch->channel, geo_ch->center_freq,
  467. is_channel_a_band(ch) ? "5.2" : "2.4",
  468. geo_ch->flags & IEEE80211_CHAN_DISABLED ?
  469. "restricted" : "valid",
  470. geo_ch->flags);
  471. }
  472. if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
  473. priv->cfg->sku & IWL_SKU_A) {
  474. printk(KERN_INFO DRV_NAME
  475. ": Incorrectly detected BG card as ABG. Please send "
  476. "your PCI ID 0x%04X:0x%04X to maintainer.\n",
  477. priv->pci_dev->device, priv->pci_dev->subsystem_device);
  478. priv->cfg->sku &= ~IWL_SKU_A;
  479. }
  480. printk(KERN_INFO DRV_NAME
  481. ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
  482. priv->bands[IEEE80211_BAND_2GHZ].n_channels,
  483. priv->bands[IEEE80211_BAND_5GHZ].n_channels);
  484. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  485. return 0;
  486. }
  487. /*
  488. * iwlcore_free_geos - undo allocations in iwlcore_init_geos
  489. */
  490. static void iwlcore_free_geos(struct iwl_priv *priv)
  491. {
  492. kfree(priv->ieee_channels);
  493. kfree(priv->ieee_rates);
  494. clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
  495. }
  496. static bool is_single_rx_stream(struct iwl_priv *priv)
  497. {
  498. return !priv->current_ht_config.is_ht ||
  499. ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
  500. (priv->current_ht_config.supp_mcs_set[2] == 0));
  501. }
  502. static u8 iwl_is_channel_extension(struct iwl_priv *priv,
  503. enum ieee80211_band band,
  504. u16 channel, u8 extension_chan_offset)
  505. {
  506. const struct iwl_channel_info *ch_info;
  507. ch_info = iwl_get_channel_info(priv, band, channel);
  508. if (!is_channel_valid(ch_info))
  509. return 0;
  510. if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE)
  511. return !(ch_info->fat_extension_channel &
  512. IEEE80211_CHAN_NO_FAT_ABOVE);
  513. else if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW)
  514. return !(ch_info->fat_extension_channel &
  515. IEEE80211_CHAN_NO_FAT_BELOW);
  516. return 0;
  517. }
  518. u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
  519. struct ieee80211_ht_info *sta_ht_inf)
  520. {
  521. struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
  522. if ((!iwl_ht_conf->is_ht) ||
  523. (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
  524. (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE))
  525. return 0;
  526. if (sta_ht_inf) {
  527. if ((!sta_ht_inf->ht_supported) ||
  528. (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
  529. return 0;
  530. }
  531. return iwl_is_channel_extension(priv, priv->band,
  532. iwl_ht_conf->control_channel,
  533. iwl_ht_conf->extension_chan_offset);
  534. }
  535. EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
  536. void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
  537. {
  538. struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
  539. u32 val;
  540. if (!ht_info->is_ht)
  541. return;
  542. /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */
  543. if (iwl_is_fat_tx_allowed(priv, NULL))
  544. rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  545. else
  546. rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
  547. RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
  548. if (le16_to_cpu(rxon->channel) != ht_info->control_channel) {
  549. IWL_DEBUG_ASSOC("control diff than current %d %d\n",
  550. le16_to_cpu(rxon->channel),
  551. ht_info->control_channel);
  552. return;
  553. }
  554. /* Note: control channel is opposite of extension channel */
  555. switch (ht_info->extension_chan_offset) {
  556. case IEEE80211_HT_IE_CHA_SEC_ABOVE:
  557. rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
  558. break;
  559. case IEEE80211_HT_IE_CHA_SEC_BELOW:
  560. rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
  561. break;
  562. case IEEE80211_HT_IE_CHA_SEC_NONE:
  563. default:
  564. rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  565. break;
  566. }
  567. val = ht_info->ht_protection;
  568. rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
  569. iwl_set_rxon_chain(priv);
  570. IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
  571. "rxon flags 0x%X operation mode :0x%X "
  572. "extension channel offset 0x%x "
  573. "control chan %d\n",
  574. ht_info->supp_mcs_set[0],
  575. ht_info->supp_mcs_set[1],
  576. ht_info->supp_mcs_set[2],
  577. le32_to_cpu(rxon->flags), ht_info->ht_protection,
  578. ht_info->extension_chan_offset,
  579. ht_info->control_channel);
  580. return;
  581. }
  582. EXPORT_SYMBOL(iwl_set_rxon_ht);
  583. #define IWL_NUM_RX_CHAINS_MULTIPLE 3
  584. #define IWL_NUM_RX_CHAINS_SINGLE 2
  585. #define IWL_NUM_IDLE_CHAINS_DUAL 2
  586. #define IWL_NUM_IDLE_CHAINS_SINGLE 1
  587. /* Determine how many receiver/antenna chains to use.
  588. * More provides better reception via diversity. Fewer saves power.
  589. * MIMO (dual stream) requires at least 2, but works better with 3.
  590. * This does not determine *which* chains to use, just how many.
  591. */
  592. static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
  593. {
  594. bool is_single = is_single_rx_stream(priv);
  595. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  596. /* # of Rx chains to use when expecting MIMO. */
  597. if (is_single || (!is_cam && (priv->current_ht_config.sm_ps ==
  598. WLAN_HT_CAP_SM_PS_STATIC)))
  599. return IWL_NUM_RX_CHAINS_SINGLE;
  600. else
  601. return IWL_NUM_RX_CHAINS_MULTIPLE;
  602. }
  603. static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
  604. {
  605. int idle_cnt;
  606. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  607. /* # Rx chains when idling and maybe trying to save power */
  608. switch (priv->current_ht_config.sm_ps) {
  609. case WLAN_HT_CAP_SM_PS_STATIC:
  610. case WLAN_HT_CAP_SM_PS_DYNAMIC:
  611. idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
  612. IWL_NUM_IDLE_CHAINS_SINGLE;
  613. break;
  614. case WLAN_HT_CAP_SM_PS_DISABLED:
  615. idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
  616. break;
  617. case WLAN_HT_CAP_SM_PS_INVALID:
  618. default:
  619. IWL_ERROR("invalide mimo ps mode %d\n",
  620. priv->current_ht_config.sm_ps);
  621. WARN_ON(1);
  622. idle_cnt = -1;
  623. break;
  624. }
  625. return idle_cnt;
  626. }
  627. /* up to 4 chains */
  628. static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
  629. {
  630. u8 res;
  631. res = (chain_bitmap & BIT(0)) >> 0;
  632. res += (chain_bitmap & BIT(1)) >> 1;
  633. res += (chain_bitmap & BIT(2)) >> 2;
  634. res += (chain_bitmap & BIT(4)) >> 4;
  635. return res;
  636. }
  637. /**
  638. * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
  639. *
  640. * Selects how many and which Rx receivers/antennas/chains to use.
  641. * This should not be used for scan command ... it puts data in wrong place.
  642. */
  643. void iwl_set_rxon_chain(struct iwl_priv *priv)
  644. {
  645. bool is_single = is_single_rx_stream(priv);
  646. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  647. u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
  648. u32 active_chains;
  649. u16 rx_chain;
  650. /* Tell uCode which antennas are actually connected.
  651. * Before first association, we assume all antennas are connected.
  652. * Just after first association, iwl_chain_noise_calibration()
  653. * checks which antennas actually *are* connected. */
  654. if (priv->chain_noise_data.active_chains)
  655. active_chains = priv->chain_noise_data.active_chains;
  656. else
  657. active_chains = priv->hw_params.valid_rx_ant;
  658. rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
  659. /* How many receivers should we use? */
  660. active_rx_cnt = iwl_get_active_rx_chain_count(priv);
  661. idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
  662. /* correct rx chain count according hw settings
  663. * and chain noise calibration
  664. */
  665. valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
  666. if (valid_rx_cnt < active_rx_cnt)
  667. active_rx_cnt = valid_rx_cnt;
  668. if (valid_rx_cnt < idle_rx_cnt)
  669. idle_rx_cnt = valid_rx_cnt;
  670. rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
  671. rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
  672. priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
  673. if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
  674. priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
  675. else
  676. priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
  677. IWL_DEBUG_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
  678. priv->staging_rxon.rx_chain,
  679. active_rx_cnt, idle_rx_cnt);
  680. WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
  681. active_rx_cnt < idle_rx_cnt);
  682. }
  683. EXPORT_SYMBOL(iwl_set_rxon_chain);
  684. /**
  685. * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  686. * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
  687. * @channel: Any channel valid for the requested phymode
  688. * In addition to setting the staging RXON, priv->phymode is also set.
  689. *
  690. * NOTE: Does not commit to the hardware; it sets appropriate bit fields
  691. * in the staging RXON flag structure based on the phymode
  692. */
  693. int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch)
  694. {
  695. enum ieee80211_band band = ch->band;
  696. u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
  697. if (!iwl_get_channel_info(priv, band, channel)) {
  698. IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
  699. channel, band);
  700. return -EINVAL;
  701. }
  702. if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
  703. (priv->band == band))
  704. return 0;
  705. priv->staging_rxon.channel = cpu_to_le16(channel);
  706. if (band == IEEE80211_BAND_5GHZ)
  707. priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
  708. else
  709. priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
  710. priv->band = band;
  711. IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
  712. return 0;
  713. }
  714. EXPORT_SYMBOL(iwl_set_rxon_channel);
  715. int iwl_setup_mac(struct iwl_priv *priv)
  716. {
  717. int ret;
  718. struct ieee80211_hw *hw = priv->hw;
  719. hw->rate_control_algorithm = "iwl-agn-rs";
  720. /* Tell mac80211 our characteristics */
  721. hw->flags = IEEE80211_HW_SIGNAL_DBM |
  722. IEEE80211_HW_NOISE_DBM;
  723. hw->wiphy->interface_modes =
  724. BIT(NL80211_IFTYPE_AP) |
  725. BIT(NL80211_IFTYPE_STATION) |
  726. BIT(NL80211_IFTYPE_ADHOC);
  727. /* Default value; 4 EDCA QOS priorities */
  728. hw->queues = 4;
  729. /* queues to support 11n aggregation */
  730. if (priv->cfg->sku & IWL_SKU_N)
  731. hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
  732. hw->conf.beacon_int = 100;
  733. hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
  734. if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
  735. priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
  736. &priv->bands[IEEE80211_BAND_2GHZ];
  737. if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
  738. priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
  739. &priv->bands[IEEE80211_BAND_5GHZ];
  740. ret = ieee80211_register_hw(priv->hw);
  741. if (ret) {
  742. IWL_ERROR("Failed to register hw (error %d)\n", ret);
  743. return ret;
  744. }
  745. priv->mac80211_registered = 1;
  746. return 0;
  747. }
  748. EXPORT_SYMBOL(iwl_setup_mac);
  749. int iwl_set_hw_params(struct iwl_priv *priv)
  750. {
  751. priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
  752. priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
  753. priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
  754. if (priv->cfg->mod_params->amsdu_size_8K)
  755. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
  756. else
  757. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
  758. priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
  759. if (priv->cfg->mod_params->disable_11n)
  760. priv->cfg->sku &= ~IWL_SKU_N;
  761. /* Device-specific setup */
  762. return priv->cfg->ops->lib->set_hw_params(priv);
  763. }
  764. EXPORT_SYMBOL(iwl_set_hw_params);
  765. int iwl_init_drv(struct iwl_priv *priv)
  766. {
  767. int ret;
  768. priv->retry_rate = 1;
  769. priv->ibss_beacon = NULL;
  770. spin_lock_init(&priv->lock);
  771. spin_lock_init(&priv->power_data.lock);
  772. spin_lock_init(&priv->sta_lock);
  773. spin_lock_init(&priv->hcmd_lock);
  774. INIT_LIST_HEAD(&priv->free_frames);
  775. mutex_init(&priv->mutex);
  776. /* Clear the driver's (not device's) station table */
  777. iwl_clear_stations_table(priv);
  778. priv->data_retry_limit = -1;
  779. priv->ieee_channels = NULL;
  780. priv->ieee_rates = NULL;
  781. priv->band = IEEE80211_BAND_2GHZ;
  782. priv->iw_mode = NL80211_IFTYPE_STATION;
  783. priv->use_ant_b_for_management_frame = 1; /* start with ant B */
  784. priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
  785. /* Choose which receivers/antennas to use */
  786. iwl_set_rxon_chain(priv);
  787. iwl_init_scan_params(priv);
  788. if (priv->cfg->mod_params->enable_qos)
  789. priv->qos_data.qos_enable = 1;
  790. iwl_reset_qos(priv);
  791. priv->qos_data.qos_active = 0;
  792. priv->qos_data.qos_cap.val = 0;
  793. priv->rates_mask = IWL_RATES_MASK;
  794. /* If power management is turned on, default to AC mode */
  795. priv->power_mode = IWL_POWER_AC;
  796. priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
  797. ret = iwl_init_channel_map(priv);
  798. if (ret) {
  799. IWL_ERROR("initializing regulatory failed: %d\n", ret);
  800. goto err;
  801. }
  802. ret = iwlcore_init_geos(priv);
  803. if (ret) {
  804. IWL_ERROR("initializing geos failed: %d\n", ret);
  805. goto err_free_channel_map;
  806. }
  807. return 0;
  808. err_free_channel_map:
  809. iwl_free_channel_map(priv);
  810. err:
  811. return ret;
  812. }
  813. EXPORT_SYMBOL(iwl_init_drv);
  814. int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
  815. {
  816. int ret = 0;
  817. if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
  818. IWL_WARNING("Requested user TXPOWER %d below limit.\n",
  819. priv->tx_power_user_lmt);
  820. return -EINVAL;
  821. }
  822. if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
  823. IWL_WARNING("Requested user TXPOWER %d above limit.\n",
  824. priv->tx_power_user_lmt);
  825. return -EINVAL;
  826. }
  827. if (priv->tx_power_user_lmt != tx_power)
  828. force = true;
  829. priv->tx_power_user_lmt = tx_power;
  830. if (force && priv->cfg->ops->lib->send_tx_power)
  831. ret = priv->cfg->ops->lib->send_tx_power(priv);
  832. return ret;
  833. }
  834. EXPORT_SYMBOL(iwl_set_tx_power);
  835. void iwl_uninit_drv(struct iwl_priv *priv)
  836. {
  837. iwl_calib_free_results(priv);
  838. iwlcore_free_geos(priv);
  839. iwl_free_channel_map(priv);
  840. kfree(priv->scan);
  841. }
  842. EXPORT_SYMBOL(iwl_uninit_drv);
  843. int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
  844. {
  845. u32 stat_flags = 0;
  846. struct iwl_host_cmd cmd = {
  847. .id = REPLY_STATISTICS_CMD,
  848. .meta.flags = flags,
  849. .len = sizeof(stat_flags),
  850. .data = (u8 *) &stat_flags,
  851. };
  852. return iwl_send_cmd(priv, &cmd);
  853. }
  854. EXPORT_SYMBOL(iwl_send_statistics_request);
  855. /**
  856. * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
  857. * using sample data 100 bytes apart. If these sample points are good,
  858. * it's a pretty good bet that everything between them is good, too.
  859. */
  860. static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
  861. {
  862. u32 val;
  863. int ret = 0;
  864. u32 errcnt = 0;
  865. u32 i;
  866. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  867. ret = iwl_grab_nic_access(priv);
  868. if (ret)
  869. return ret;
  870. for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
  871. /* read data comes through single port, auto-incr addr */
  872. /* NOTE: Use the debugless read so we don't flood kernel log
  873. * if IWL_DL_IO is set */
  874. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
  875. i + RTC_INST_LOWER_BOUND);
  876. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  877. if (val != le32_to_cpu(*image)) {
  878. ret = -EIO;
  879. errcnt++;
  880. if (errcnt >= 3)
  881. break;
  882. }
  883. }
  884. iwl_release_nic_access(priv);
  885. return ret;
  886. }
  887. /**
  888. * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
  889. * looking at all data.
  890. */
  891. static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
  892. u32 len)
  893. {
  894. u32 val;
  895. u32 save_len = len;
  896. int ret = 0;
  897. u32 errcnt;
  898. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  899. ret = iwl_grab_nic_access(priv);
  900. if (ret)
  901. return ret;
  902. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
  903. errcnt = 0;
  904. for (; len > 0; len -= sizeof(u32), image++) {
  905. /* read data comes through single port, auto-incr addr */
  906. /* NOTE: Use the debugless read so we don't flood kernel log
  907. * if IWL_DL_IO is set */
  908. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  909. if (val != le32_to_cpu(*image)) {
  910. IWL_ERROR("uCode INST section is invalid at "
  911. "offset 0x%x, is 0x%x, s/b 0x%x\n",
  912. save_len - len, val, le32_to_cpu(*image));
  913. ret = -EIO;
  914. errcnt++;
  915. if (errcnt >= 20)
  916. break;
  917. }
  918. }
  919. iwl_release_nic_access(priv);
  920. if (!errcnt)
  921. IWL_DEBUG_INFO
  922. ("ucode image in INSTRUCTION memory is good\n");
  923. return ret;
  924. }
  925. /**
  926. * iwl_verify_ucode - determine which instruction image is in SRAM,
  927. * and verify its contents
  928. */
  929. int iwl_verify_ucode(struct iwl_priv *priv)
  930. {
  931. __le32 *image;
  932. u32 len;
  933. int ret;
  934. /* Try bootstrap */
  935. image = (__le32 *)priv->ucode_boot.v_addr;
  936. len = priv->ucode_boot.len;
  937. ret = iwlcore_verify_inst_sparse(priv, image, len);
  938. if (!ret) {
  939. IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
  940. return 0;
  941. }
  942. /* Try initialize */
  943. image = (__le32 *)priv->ucode_init.v_addr;
  944. len = priv->ucode_init.len;
  945. ret = iwlcore_verify_inst_sparse(priv, image, len);
  946. if (!ret) {
  947. IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
  948. return 0;
  949. }
  950. /* Try runtime/protocol */
  951. image = (__le32 *)priv->ucode_code.v_addr;
  952. len = priv->ucode_code.len;
  953. ret = iwlcore_verify_inst_sparse(priv, image, len);
  954. if (!ret) {
  955. IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
  956. return 0;
  957. }
  958. IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
  959. /* Since nothing seems to match, show first several data entries in
  960. * instruction SRAM, so maybe visual inspection will give a clue.
  961. * Selection of bootstrap image (vs. other images) is arbitrary. */
  962. image = (__le32 *)priv->ucode_boot.v_addr;
  963. len = priv->ucode_boot.len;
  964. ret = iwl_verify_inst_full(priv, image, len);
  965. return ret;
  966. }
  967. EXPORT_SYMBOL(iwl_verify_ucode);
  968. static const char *desc_lookup(int i)
  969. {
  970. switch (i) {
  971. case 1:
  972. return "FAIL";
  973. case 2:
  974. return "BAD_PARAM";
  975. case 3:
  976. return "BAD_CHECKSUM";
  977. case 4:
  978. return "NMI_INTERRUPT";
  979. case 5:
  980. return "SYSASSERT";
  981. case 6:
  982. return "FATAL_ERROR";
  983. }
  984. return "UNKNOWN";
  985. }
  986. #define ERROR_START_OFFSET (1 * sizeof(u32))
  987. #define ERROR_ELEM_SIZE (7 * sizeof(u32))
  988. void iwl_dump_nic_error_log(struct iwl_priv *priv)
  989. {
  990. u32 data2, line;
  991. u32 desc, time, count, base, data1;
  992. u32 blink1, blink2, ilink1, ilink2;
  993. int ret;
  994. if (priv->ucode_type == UCODE_INIT)
  995. base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
  996. else
  997. base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
  998. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  999. IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
  1000. return;
  1001. }
  1002. ret = iwl_grab_nic_access(priv);
  1003. if (ret) {
  1004. IWL_WARNING("Can not read from adapter at this time.\n");
  1005. return;
  1006. }
  1007. count = iwl_read_targ_mem(priv, base);
  1008. if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
  1009. IWL_ERROR("Start IWL Error Log Dump:\n");
  1010. IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count);
  1011. }
  1012. desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
  1013. blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
  1014. blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
  1015. ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
  1016. ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
  1017. data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
  1018. data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
  1019. line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
  1020. time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
  1021. IWL_ERROR("Desc Time "
  1022. "data1 data2 line\n");
  1023. IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n",
  1024. desc_lookup(desc), desc, time, data1, data2, line);
  1025. IWL_ERROR("blink1 blink2 ilink1 ilink2\n");
  1026. IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
  1027. ilink1, ilink2);
  1028. iwl_release_nic_access(priv);
  1029. }
  1030. EXPORT_SYMBOL(iwl_dump_nic_error_log);
  1031. #define EVENT_START_OFFSET (4 * sizeof(u32))
  1032. /**
  1033. * iwl_print_event_log - Dump error event log to syslog
  1034. *
  1035. * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  1036. */
  1037. static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
  1038. u32 num_events, u32 mode)
  1039. {
  1040. u32 i;
  1041. u32 base; /* SRAM byte address of event log header */
  1042. u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
  1043. u32 ptr; /* SRAM byte address of log data */
  1044. u32 ev, time, data; /* event log data */
  1045. if (num_events == 0)
  1046. return;
  1047. if (priv->ucode_type == UCODE_INIT)
  1048. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1049. else
  1050. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1051. if (mode == 0)
  1052. event_size = 2 * sizeof(u32);
  1053. else
  1054. event_size = 3 * sizeof(u32);
  1055. ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
  1056. /* "time" is actually "data" for mode 0 (no timestamp).
  1057. * place event id # at far right for easier visual parsing. */
  1058. for (i = 0; i < num_events; i++) {
  1059. ev = iwl_read_targ_mem(priv, ptr);
  1060. ptr += sizeof(u32);
  1061. time = iwl_read_targ_mem(priv, ptr);
  1062. ptr += sizeof(u32);
  1063. if (mode == 0) {
  1064. /* data, ev */
  1065. IWL_ERROR("EVT_LOG:0x%08x:%04u\n", time, ev);
  1066. } else {
  1067. data = iwl_read_targ_mem(priv, ptr);
  1068. ptr += sizeof(u32);
  1069. IWL_ERROR("EVT_LOGT:%010u:0x%08x:%04u\n",
  1070. time, data, ev);
  1071. }
  1072. }
  1073. }
  1074. void iwl_dump_nic_event_log(struct iwl_priv *priv)
  1075. {
  1076. int ret;
  1077. u32 base; /* SRAM byte address of event log header */
  1078. u32 capacity; /* event log capacity in # entries */
  1079. u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
  1080. u32 num_wraps; /* # times uCode wrapped to top of log */
  1081. u32 next_entry; /* index of next entry to be written by uCode */
  1082. u32 size; /* # entries that we'll print */
  1083. if (priv->ucode_type == UCODE_INIT)
  1084. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1085. else
  1086. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1087. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  1088. IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
  1089. return;
  1090. }
  1091. ret = iwl_grab_nic_access(priv);
  1092. if (ret) {
  1093. IWL_WARNING("Can not read from adapter at this time.\n");
  1094. return;
  1095. }
  1096. /* event log header */
  1097. capacity = iwl_read_targ_mem(priv, base);
  1098. mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
  1099. num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
  1100. next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
  1101. size = num_wraps ? capacity : next_entry;
  1102. /* bail out if nothing in log */
  1103. if (size == 0) {
  1104. IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
  1105. iwl_release_nic_access(priv);
  1106. return;
  1107. }
  1108. IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
  1109. size, num_wraps);
  1110. /* if uCode has wrapped back to top of log, start at the oldest entry,
  1111. * i.e the next one that uCode would fill. */
  1112. if (num_wraps)
  1113. iwl_print_event_log(priv, next_entry,
  1114. capacity - next_entry, mode);
  1115. /* (then/else) start at top of log */
  1116. iwl_print_event_log(priv, 0, next_entry, mode);
  1117. iwl_release_nic_access(priv);
  1118. }
  1119. EXPORT_SYMBOL(iwl_dump_nic_event_log);
  1120. void iwl_rf_kill_ct_config(struct iwl_priv *priv)
  1121. {
  1122. struct iwl_ct_kill_config cmd;
  1123. unsigned long flags;
  1124. int ret = 0;
  1125. spin_lock_irqsave(&priv->lock, flags);
  1126. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
  1127. CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
  1128. spin_unlock_irqrestore(&priv->lock, flags);
  1129. cmd.critical_temperature_R =
  1130. cpu_to_le32(priv->hw_params.ct_kill_threshold);
  1131. ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
  1132. sizeof(cmd), &cmd);
  1133. if (ret)
  1134. IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n");
  1135. else
  1136. IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
  1137. "critical temperature is %d\n",
  1138. cmd.critical_temperature_R);
  1139. }
  1140. EXPORT_SYMBOL(iwl_rf_kill_ct_config);
  1141. /*
  1142. * CARD_STATE_CMD
  1143. *
  1144. * Use: Sets the device's internal card state to enable, disable, or halt
  1145. *
  1146. * When in the 'enable' state the card operates as normal.
  1147. * When in the 'disable' state, the card enters into a low power mode.
  1148. * When in the 'halt' state, the card is shut down and must be fully
  1149. * restarted to come back on.
  1150. */
  1151. static int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
  1152. {
  1153. struct iwl_host_cmd cmd = {
  1154. .id = REPLY_CARD_STATE_CMD,
  1155. .len = sizeof(u32),
  1156. .data = &flags,
  1157. .meta.flags = meta_flag,
  1158. };
  1159. return iwl_send_cmd(priv, &cmd);
  1160. }
  1161. void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
  1162. {
  1163. unsigned long flags;
  1164. if (test_bit(STATUS_RF_KILL_SW, &priv->status))
  1165. return;
  1166. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n");
  1167. iwl_scan_cancel(priv);
  1168. /* FIXME: This is a workaround for AP */
  1169. if (priv->iw_mode != NL80211_IFTYPE_AP) {
  1170. spin_lock_irqsave(&priv->lock, flags);
  1171. iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
  1172. CSR_UCODE_SW_BIT_RFKILL);
  1173. spin_unlock_irqrestore(&priv->lock, flags);
  1174. /* call the host command only if no hw rf-kill set */
  1175. if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
  1176. iwl_is_ready(priv))
  1177. iwl_send_card_state(priv,
  1178. CARD_STATE_CMD_DISABLE, 0);
  1179. set_bit(STATUS_RF_KILL_SW, &priv->status);
  1180. /* make sure mac80211 stop sending Tx frame */
  1181. if (priv->mac80211_registered)
  1182. ieee80211_stop_queues(priv->hw);
  1183. }
  1184. }
  1185. EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
  1186. int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
  1187. {
  1188. unsigned long flags;
  1189. if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
  1190. return 0;
  1191. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n");
  1192. spin_lock_irqsave(&priv->lock, flags);
  1193. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
  1194. /* If the driver is up it will receive CARD_STATE_NOTIFICATION
  1195. * notification where it will clear SW rfkill status.
  1196. * Setting it here would break the handler. Only if the
  1197. * interface is down we can set here since we don't
  1198. * receive any further notification.
  1199. */
  1200. if (!priv->is_open)
  1201. clear_bit(STATUS_RF_KILL_SW, &priv->status);
  1202. spin_unlock_irqrestore(&priv->lock, flags);
  1203. /* wake up ucode */
  1204. msleep(10);
  1205. spin_lock_irqsave(&priv->lock, flags);
  1206. iwl_read32(priv, CSR_UCODE_DRV_GP1);
  1207. if (!iwl_grab_nic_access(priv))
  1208. iwl_release_nic_access(priv);
  1209. spin_unlock_irqrestore(&priv->lock, flags);
  1210. if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
  1211. IWL_DEBUG_RF_KILL("Can not turn radio back on - "
  1212. "disabled by HW switch\n");
  1213. return 0;
  1214. }
  1215. /* If the driver is already loaded, it will receive
  1216. * CARD_STATE_NOTIFICATION notifications and the handler will
  1217. * call restart to reload the driver.
  1218. */
  1219. return 1;
  1220. }
  1221. EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);