| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109 |
- config SND_BF5XX_I2S
- tristate "SoC I2S Audio for the ADI BF5xx chip"
- depends on BLACKFIN
- help
- Say Y or M if you want to add support for codecs attached to
- the Blackfin SPORT (synchronous serial ports) interface in I2S
- mode (supports single stereo In/Out).
- You will also need to select the audio interfaces to support below.
- config SND_BF5XX_SOC_SSM2602
- tristate "SoC SSM2602 Audio support for BF52x ezkit"
- depends on SND_BF5XX_I2S
- select SND_BF5XX_SOC_I2S
- select SND_SOC_SSM2602
- select I2C
- help
- Say Y if you want to add support for SoC audio on BF527-EZKIT.
- config SND_BF5XX_SOC_AD73311
- tristate "SoC AD73311 Audio support for Blackfin"
- depends on SND_BF5XX_I2S
- select SND_BF5XX_SOC_I2S
- select SND_SOC_AD73311
- help
- Say Y if you want to add support for AD73311 codec on Blackfin.
- config SND_BFIN_AD73311_SE
- int "PF pin for AD73311L Chip Select"
- depends on SND_BF5XX_SOC_AD73311
- default 4
- help
- Enter the GPIO used to control AD73311's SE pin. Acceptable
- values are 0 to 7
- config SND_BF5XX_AC97
- tristate "SoC AC97 Audio for the ADI BF5xx chip"
- depends on BLACKFIN
- help
- Say Y or M if you want to add support for codecs attached to
- the Blackfin SPORT (synchronous serial ports) interface in slot 16
- mode (pseudo AC97 interface).
- You will also need to select the audio interfaces to support below.
- Note:
- AC97 codecs which do not implment the slot-16 mode will not function
- properly with this driver. This driver is known to work with the
- Analog Devices line of AC97 codecs.
- config SND_BF5XX_MMAP_SUPPORT
- bool "Enable MMAP Support"
- depends on SND_BF5XX_AC97
- default y
- help
- Say y if you want AC97 driver to support mmap mode.
- We introduce an intermediate buffer to simulate mmap.
- config SND_BF5XX_MULTICHAN_SUPPORT
- bool "Enable Multichannel Support"
- depends on SND_BF5XX_AC97
- default n
- help
- Say y if you want AC97 driver to support up to 5.1 channel audio.
- this mode will consume much more memory for DMA.
- config SND_BF5XX_SOC_SPORT
- tristate
- config SND_BF5XX_SOC_I2S
- tristate
- select SND_BF5XX_SOC_SPORT
- config SND_BF5XX_SOC_AC97
- tristate
- select AC97_BUS
- select SND_SOC_AC97_BUS
- select SND_BF5XX_SOC_SPORT
- config SND_BF5XX_SOC_AD1980
- tristate "SoC AD1980/1 Audio support for BF5xx"
- depends on SND_BF5XX_AC97
- select SND_BF5XX_SOC_AC97
- select SND_SOC_AD1980
- help
- Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
- config SND_BF5XX_SPORT_NUM
- int "Set a SPORT for Sound chip"
- depends on (SND_BF5XX_I2S || SND_BF5XX_AC97)
- range 0 3 if BF54x
- range 0 1 if !BF54x
- default 0
- help
- Set the correct SPORT for sound chip.
- config SND_BF5XX_HAVE_COLD_RESET
- bool "BOARD has COLD Reset GPIO"
- depends on SND_BF5XX_AC97
- default y if BFIN548_EZKIT
- default n if !BFIN548_EZKIT
- config SND_BF5XX_RESET_GPIO_NUM
- int "Set a GPIO for cold reset"
- depends on SND_BF5XX_HAVE_COLD_RESET
- range 0 159
- default 19 if BFIN548_EZKIT
- default 5 if BFIN537_STAMP
- default 0
- help
- Set the correct GPIO for RESET the sound chip.
|
