Kconfig 5.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229
  1. # Copyright 2008 Openmoko, Inc.
  2. # Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
  3. #
  4. # Licensed under GPLv2
  5. # temporary until we can eliminate all drivers using it.
  6. config PLAT_S3C64XX
  7. bool
  8. depends on ARCH_S3C64XX
  9. select SAMSUNG_WAKEMASK
  10. default y
  11. help
  12. Base platform code for any Samsung S3C64XX device
  13. # Configuration options for the S3C6410 CPU
  14. config CPU_S3C6400
  15. bool
  16. help
  17. Enable S3C6400 CPU support
  18. config CPU_S3C6410
  19. bool
  20. help
  21. Enable S3C6410 CPU support
  22. config S3C64XX_DMA
  23. bool "S3C64XX DMA"
  24. select S3C_DMA
  25. config S3C64XX_SETUP_SDHCI
  26. select S3C64XX_SETUP_SDHCI_GPIO
  27. bool
  28. help
  29. Internal configuration for default SDHCI setup for S3C6400 and
  30. S3C6410 SoCs.
  31. config S3C64XX_DEV_ONENAND1
  32. bool
  33. help
  34. Compile in platform device definition for OneNAND1 controller
  35. # platform specific device setup
  36. config S3C64XX_SETUP_I2C0
  37. bool
  38. default y
  39. help
  40. Common setup code for i2c bus 0.
  41. Note, currently since i2c0 is always compiled, this setup helper
  42. is always compiled with it.
  43. config S3C64XX_SETUP_I2C1
  44. bool
  45. help
  46. Common setup code for i2c bus 1.
  47. config S3C64XX_SETUP_IDE
  48. bool
  49. help
  50. Common setup code for S3C64XX IDE.
  51. config S3C64XX_SETUP_FB_24BPP
  52. bool
  53. help
  54. Common setup code for S3C64XX with an 24bpp RGB display helper.
  55. config S3C64XX_SETUP_SDHCI_GPIO
  56. bool
  57. help
  58. Common setup code for S3C64XX SDHCI GPIO configurations
  59. # S36400 Macchine support
  60. config MACH_SMDK6400
  61. bool "SMDK6400"
  62. select CPU_S3C6400
  63. select S3C_DEV_HSMMC
  64. select S3C_DEV_NAND
  65. select S3C64XX_SETUP_SDHCI
  66. help
  67. Machine support for the Samsung SMDK6400
  68. # S3C6410 machine support
  69. config MACH_ANW6410
  70. bool "A&W6410"
  71. select CPU_S3C6410
  72. select S3C_DEV_FB
  73. select S3C64XX_SETUP_FB_24BPP
  74. help
  75. Machine support for the A&W6410
  76. config MACH_SMDK6410
  77. bool "SMDK6410"
  78. select CPU_S3C6410
  79. select SAMSUNG_DEV_ADC
  80. select S3C_DEV_HSMMC
  81. select S3C_DEV_HSMMC1
  82. select S3C_DEV_I2C1
  83. select SAMSUNG_DEV_IDE
  84. select S3C_DEV_FB
  85. select S3C_DEV_RTC
  86. select SAMSUNG_DEV_TS
  87. select S3C_DEV_USB_HOST
  88. select S3C_DEV_USB_HSOTG
  89. select S3C_DEV_WDT
  90. select HAVE_S3C2410_WATCHDOG
  91. select S3C64XX_SETUP_SDHCI
  92. select S3C64XX_SETUP_I2C1
  93. select S3C64XX_SETUP_IDE
  94. select S3C64XX_SETUP_FB_24BPP
  95. help
  96. Machine support for the Samsung SMDK6410
  97. # At least some of the SMDK6410s were shipped with the card detect
  98. # for the MMC/SD slots connected to the same input. This means that
  99. # either the boards need to be altered to have channel0 to an alternate
  100. # configuration or that only one slot can be used.
  101. choice
  102. prompt "SMDK6410 MMC/SD slot setup"
  103. depends on MACH_SMDK6410
  104. config SMDK6410_SD_CH0
  105. bool "Use channel 0 only"
  106. depends on MACH_SMDK6410
  107. help
  108. Select CON7 (channel 0) as the MMC/SD slot, as
  109. at least some SMDK6410 boards come with the
  110. resistors fitted so that the card detects for
  111. channels 0 and 1 are the same.
  112. config SMDK6410_SD_CH1
  113. bool "Use channel 1 only"
  114. depends on MACH_SMDK6410
  115. help
  116. Select CON6 (channel 1) as the MMC/SD slot, as
  117. at least some SMDK6410 boards come with the
  118. resistors fitted so that the card detects for
  119. channels 0 and 1 are the same.
  120. endchoice
  121. config SMDK6410_WM1190_EV1
  122. bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
  123. depends on MACH_SMDK6410
  124. select REGULATOR
  125. select REGULATOR_WM8350
  126. select S3C24XX_GPIO_EXTRA64
  127. select MFD_WM8350_I2C
  128. select MFD_WM8350_CONFIG_MODE_0
  129. select MFD_WM8350_CONFIG_MODE_3
  130. select MFD_WM8352_CONFIG_MODE_0
  131. help
  132. The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
  133. and audio daughtercard for the Samsung SMDK6410 reference
  134. platform. Enabling this option will build support for this
  135. module into the kernel. The presence of the module will be
  136. detected at runtime so the the resulting kernel can be used
  137. with or without the 1190-EV1 fitted.
  138. config SMDK6410_WM1192_EV1
  139. bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
  140. depends on MACH_SMDK6410
  141. select REGULATOR
  142. select REGULATOR_WM831X
  143. select S3C24XX_GPIO_EXTRA64
  144. select MFD_WM831X
  145. help
  146. The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
  147. daughtercard for the Samsung SMDK6410 reference platform.
  148. Enabling this option will build support for this module into
  149. the kernel. The presence of the daughtercard will be
  150. detected at runtime so the the resulting kernel can be used
  151. with or without the 1192-EV1 fitted.
  152. config MACH_NCP
  153. bool "NCP"
  154. select CPU_S3C6410
  155. select S3C_DEV_I2C1
  156. select S3C_DEV_HSMMC1
  157. select S3C64XX_SETUP_I2C1
  158. help
  159. Machine support for the Samsung NCP
  160. config MACH_HMT
  161. bool "Airgoo HMT"
  162. select CPU_S3C6410
  163. select S3C_DEV_FB
  164. select S3C_DEV_NAND
  165. select S3C_DEV_USB_HOST
  166. select S3C64XX_SETUP_FB_24BPP
  167. select HAVE_PWM
  168. help
  169. Machine support for the Airgoo HMT
  170. config MACH_SMARTQ
  171. bool
  172. select CPU_S3C6410
  173. select S3C_DEV_HSMMC
  174. select S3C_DEV_HSMMC1
  175. select S3C_DEV_HSMMC2
  176. select S3C_DEV_FB
  177. select S3C_DEV_HWMON
  178. select S3C_DEV_RTC
  179. select S3C_DEV_USB_HSOTG
  180. select S3C_DEV_USB_HOST
  181. select S3C64XX_SETUP_SDHCI
  182. select S3C64XX_SETUP_FB_24BPP
  183. select SAMSUNG_DEV_ADC
  184. select SAMSUNG_DEV_TS
  185. select HAVE_PWM
  186. help
  187. Shared machine support for SmartQ 5/7
  188. config MACH_SMARTQ5
  189. bool "SmartQ 5"
  190. select MACH_SMARTQ
  191. help
  192. Machine support for the SmartQ 5
  193. config MACH_SMARTQ7
  194. bool "SmartQ 7"
  195. select MACH_SMARTQ
  196. help
  197. Machine support for the SmartQ 7