sdrc.c 2.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110
  1. /*
  2. * SMS/SDRC (SDRAM controller) common code for OMAP2/3
  3. *
  4. * Copyright (C) 2005, 2008 Texas Instruments Inc.
  5. * Copyright (C) 2005, 2008 Nokia Corporation
  6. *
  7. * Tony Lindgren <tony@atomide.com>
  8. * Paul Walmsley
  9. * Richard Woodruff <r-woodruff2@ti.com>
  10. *
  11. * This program is free software; you can redistribute it and/or modify
  12. * it under the terms of the GNU General Public License version 2 as
  13. * published by the Free Software Foundation.
  14. */
  15. #undef DEBUG
  16. #include <linux/module.h>
  17. #include <linux/kernel.h>
  18. #include <linux/device.h>
  19. #include <linux/list.h>
  20. #include <linux/errno.h>
  21. #include <linux/delay.h>
  22. #include <linux/clk.h>
  23. #include <linux/io.h>
  24. #include <mach/common.h>
  25. #include <mach/clock.h>
  26. #include <mach/sram.h>
  27. #include "prm.h"
  28. #include <mach/sdrc.h>
  29. #include "sdrc.h"
  30. static struct omap_sdrc_params *sdrc_init_params;
  31. void __iomem *omap2_sdrc_base;
  32. void __iomem *omap2_sms_base;
  33. /* SDRC_POWER register bits */
  34. #define SDRC_POWER_EXTCLKDIS_SHIFT 3
  35. #define SDRC_POWER_PWDENA_SHIFT 2
  36. #define SDRC_POWER_PAGEPOLICY_SHIFT 0
  37. /**
  38. * omap2_sdrc_get_params - return SDRC register values for a given clock rate
  39. * @r: SDRC clock rate (in Hz)
  40. *
  41. * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
  42. * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
  43. * SDRC clock rate 'r'. These parameters control various timing
  44. * delays in the SDRAM controller that are expressed in terms of the
  45. * number of SDRC clock cycles to wait; hence the clock rate
  46. * dependency. Note that sdrc_init_params must be sorted rate
  47. * descending. Also assumes that both chip-selects use the same
  48. * timing parameters. Returns a struct omap_sdrc_params * upon
  49. * success, or NULL upon failure.
  50. */
  51. struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
  52. {
  53. struct omap_sdrc_params *sp;
  54. sp = sdrc_init_params;
  55. while (sp->rate != r)
  56. sp++;
  57. if (!sp->rate)
  58. return NULL;
  59. return sp;
  60. }
  61. void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
  62. {
  63. omap2_sdrc_base = omap2_globals->sdrc;
  64. omap2_sms_base = omap2_globals->sms;
  65. }
  66. /**
  67. * omap2_sdrc_init - initialize SMS, SDRC devices on boot
  68. * @sp: pointer to a null-terminated list of struct omap_sdrc_params
  69. *
  70. * Turn on smart idle modes for SDRAM scheduler and controller.
  71. * Program a known-good configuration for the SDRC to deal with buggy
  72. * bootloaders.
  73. */
  74. void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
  75. {
  76. u32 l;
  77. l = sms_read_reg(SMS_SYSCONFIG);
  78. l &= ~(0x3 << 3);
  79. l |= (0x2 << 3);
  80. sms_write_reg(l, SMS_SYSCONFIG);
  81. l = sdrc_read_reg(SDRC_SYSCONFIG);
  82. l &= ~(0x3 << 3);
  83. l |= (0x2 << 3);
  84. sdrc_write_reg(l, SDRC_SYSCONFIG);
  85. sdrc_init_params = sp;
  86. /* XXX Enable SRFRONIDLEREQ here also? */
  87. l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
  88. (1 << SDRC_POWER_PWDENA_SHIFT) |
  89. (1 << SDRC_POWER_PAGEPOLICY_SHIFT);
  90. sdrc_write_reg(l, SDRC_POWER);
  91. }