linux-vybrid_public/drivers/hwmon/pmbus_core.c

/*
 * Hardware monitoring driver for PMBus devices
 *
 * Copyright (c) 2010, 2011 Ericsson AB.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/delay.h>
#include <linux/i2c/pmbus.h>
#include "pmbus.h"

/*
 * Constants needed to determine number of sensors, booleans, and labels.
 */
#define PMBUS_MAX_INPUT_SENSORS		11	/* 6*volt, 3*curr, 2*power */
#define PMBUS_VOUT_SENSORS_PER_PAGE	5	/* input, min, max, lcrit,
						   crit */
#define PMBUS_IOUT_SENSORS_PER_PAGE	4	/* input, min, max, crit */
#define PMBUS_POUT_SENSORS_PER_PAGE	4	/* input, cap, max, crit */
#define PMBUS_MAX_SENSORS_PER_FAN	1	/* input */
#define PMBUS_MAX_SENSORS_PER_TEMP	5	/* input, min, max, lcrit,
						   crit */

#define PMBUS_MAX_INPUT_BOOLEANS	7	/* v: min_alarm, max_alarm,
						   lcrit_alarm, crit_alarm;
						   c: alarm, crit_alarm;
						   p: crit_alarm */
#define PMBUS_VOUT_BOOLEANS_PER_PAGE	4	/* min_alarm, max_alarm,
						   lcrit_alarm, crit_alarm */
#define PMBUS_IOUT_BOOLEANS_PER_PAGE	3	/* alarm, lcrit_alarm,
						   crit_alarm */
#define PMBUS_POUT_BOOLEANS_PER_PAGE	2	/* alarm, crit_alarm */
#define PMBUS_MAX_BOOLEANS_PER_FAN	2	/* alarm, fault */
#define PMBUS_MAX_BOOLEANS_PER_TEMP	4	/* min_alarm, max_alarm,
						   lcrit_alarm, crit_alarm */

#define PMBUS_MAX_INPUT_LABELS		4	/* vin, vcap, iin, pin */

/*
 * status, status_vout, status_iout, status_fans, status_fan34, and status_temp
 * are paged. status_input is unpaged.
 */
#define PB_NUM_STATUS_REG	(PMBUS_PAGES * 6 + 1)

/*
 * Index into status register array, per status register group
 */
#define PB_STATUS_BASE		0
#define PB_STATUS_VOUT_BASE	(PB_STATUS_BASE + PMBUS_PAGES)
#define PB_STATUS_IOUT_BASE	(PB_STATUS_VOUT_BASE + PMBUS_PAGES)
#define PB_STATUS_FAN_BASE	(PB_STATUS_IOUT_BASE + PMBUS_PAGES)
#define PB_STATUS_FAN34_BASE	(PB_STATUS_FAN_BASE + PMBUS_PAGES)
#define PB_STATUS_INPUT_BASE	(PB_STATUS_FAN34_BASE + PMBUS_PAGES)
#define PB_STATUS_TEMP_BASE	(PB_STATUS_INPUT_BASE + 1)

struct pmbus_sensor {
	char name[I2C_NAME_SIZE];	/* sysfs sensor name */
	struct sensor_device_attribute attribute;
	u8 page;		/* page number */
	u8 reg;			/* register */
	enum pmbus_sensor_classes class;	/* sensor class */
	bool update;		/* runtime sensor update needed */
	int data;		/* Sensor data.
				   Negative if there was a read error */
};

struct pmbus_boolean {
	char name[I2C_NAME_SIZE];	/* sysfs boolean name */
	struct sensor_device_attribute attribute;
};

struct pmbus_label {
	char name[I2C_NAME_SIZE];	/* sysfs label name */
	struct sensor_device_attribute attribute;
	char label[I2C_NAME_SIZE];	/* label */
};

struct pmbus_data {
	struct device *hwmon_dev;

	u32 flags;		/* from platform data */

	int exponent;		/* linear mode: exponent for output voltages */

	const struct pmbus_driver_info *info;

	int max_attributes;
	int num_attributes;
	struct attribute **attributes;
	struct attribute_group group;

	/*
	 * Sensors cover both sensor and limit registers.
	 */
	int max_sensors;
	int num_sensors;
	struct pmbus_sensor *sensors;
	/*
	 * Booleans are used for alarms.
	 * Values are determined from status registers.
	 */
	int max_booleans;
	int num_booleans;
	struct pmbus_boolean *booleans;
	/*
	 * Labels are used to map generic names (e.g., "in1")
	 * to PMBus specific names (e.g., "vin" or "vout1").
	 */
	int max_labels;
	int num_labels;
	struct pmbus_label *labels;

	struct mutex update_lock;
	bool valid;
	unsigned long last_updated;	/* in jiffies */

	/*
	 * A single status register covers multiple attributes,
	 * so we keep them all together.
	 */
	u8 status_bits;
	u8 status[PB_NUM_STATUS_REG];

	u8 currpage;
};

int pmbus_set_page(struct i2c_client *client, u8 page)
{
	struct pmbus_data *data = i2c_get_clientdata(client);
	int rv = 0;
	int newpage;

	if (page != data->currpage) {
		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
		newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
		if (newpage != page)
			rv = -EINVAL;
		else
			data->currpage = page;
	}
	return rv;
}
EXPORT_SYMBOL_GPL(pmbus_set_page);

static int pmbus_write_byte(struct i2c_client *client, u8 page, u8 value)
{
	int rv;

	rv = pmbus_set_page(client, page);
	if (rv < 0)
		return rv;

	return i2c_smbus_write_byte(client, value);
}

static int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg,
				 u16 word)
{
	int rv;

	rv = pmbus_set_page(client, page);
	if (rv < 0)
		return rv;

	return i2c_smbus_write_word_data(client, reg, word);
}

int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
{
	int rv;

	rv = pmbus_set_page(client, page);
	if (rv < 0)
		return rv;

	return i2c_smbus_read_word_data(client, reg);
}
EXPORT_SYMBOL_GPL(pmbus_read_word_data);

static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg)
{
	int rv;

	rv = pmbus_set_page(client, page);
	if (rv < 0)
		return rv;

	return i2c_smbus_read_byte_data(client, reg);
}

static void pmbus_clear_fault_page(struct i2c_client *client, int page)
{
	pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
}

void pmbus_clear_faults(struct i2c_client *client)
{
	struct pmbus_data *data = i2c_get_clientdata(client);
	int i;

	for (i = 0; i < data->info->pages; i++)
		pmbus_clear_fault_page(client, i);
}
EXPORT_SYMBOL_GPL(pmbus_clear_faults);

static int pmbus_check_status_cml(struct i2c_client *client, int page)
{
	int status, status2;

	status = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
	if (status < 0 || (status & PB_STATUS_CML)) {
		status2 = pmbus_read_byte_data(client, page, PMBUS_STATUS_CML);
		if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
			return -EINVAL;
	}
	return 0;
}

bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
{
	int rv;
	struct pmbus_data *data = i2c_get_clientdata(client);

	rv = pmbus_read_byte_data(client, page, reg);
	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
		rv = pmbus_check_status_cml(client, page);
	pmbus_clear_fault_page(client, page);
	return rv >= 0;
}
EXPORT_SYMBOL_GPL(pmbus_check_byte_register);

bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
{
	int rv;
	struct pmbus_data *data = i2c_get_clientdata(client);

	rv = pmbus_read_word_data(client, page, reg);
	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
		rv = pmbus_check_status_cml(client, page);
	pmbus_clear_fault_page(client, page);
	return rv >= 0;
}
EXPORT_SYMBOL_GPL(pmbus_check_word_register);

const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
{
	struct pmbus_data *data = i2c_get_clientdata(client);

	return data->info;
}
EXPORT_SYMBOL_GPL(pmbus_get_driver_info);

static int pmbus_get_status(struct i2c_client *client, int page, int reg)
{
	struct pmbus_data *data = i2c_get_clientdata(client);
	const struct pmbus_driver_info *info = data->info;
	int status;

	if (info->get_status) {
		status = info->get_status(client, page, reg);
		if (status != -ENODATA)
			return status;
	}
	return  pmbus_read_byte_data(client, page, reg);
}

static struct pmbus_data *pmbus_update_device(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct pmbus_data *data = i2c_get_clientdata(client);
	const struct pmbus_driver_info *info = data->info;

	mutex_lock(&data->update_lock);
	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
		int i;

		for (i = 0; i < info->pages; i++)
			data->status[PB_STATUS_BASE + i]
			    = pmbus_read_byte_data(client, i,
						   PMBUS_STATUS_BYTE);
		for (i = 0; i < info->pages; i++) {
			if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT))
				continue;
			data->status[PB_STATUS_VOUT_BASE + i]
			  = pmbus_get_status(client, i, PMBUS_STATUS_VOUT);
		}
		for (i = 0; i < info->pages; i++) {
			if (!(info->func[i] & PMBUS_HAVE_STATUS_IOUT))
				continue;
			data->status[PB_STATUS_IOUT_BASE + i]
			  = pmbus_get_status(client, i, PMBUS_STATUS_IOUT);
		}
		for (i = 0; i < info->pages; i++) {
			if (!(info->func[i] & PMBUS_HAVE_STATUS_TEMP))
				continue;
			data->status[PB_STATUS_TEMP_BASE + i]
			  = pmbus_get_status(client, i,
					     PMBUS_STATUS_TEMPERATURE);
		}
		for (i = 0; i < info->pages; i++) {
			if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN12))
				continue;
			data->status[PB_STATUS_FAN_BASE + i]
			  = pmbus_get_status(client, i, PMBUS_STATUS_FAN_12);
		}

		for (i = 0; i < info->pages; i++) {
			if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN34))
				continue;
			data->status[PB_STATUS_FAN34_BASE + i]
			  = pmbus_get_status(client, i, PMBUS_STATUS_FAN_34);
		}

		if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
			data->status[PB_STATUS_INPUT_BASE]
			  = pmbus_get_status(client, 0, PMBUS_STATUS_INPUT);

		for (i = 0; i < data->num_sensors; i++) {
			struct pmbus_sensor *sensor = &data->sensors[i];

			if (!data->valid || sensor->update)
				sensor->data
				    = pmbus_read_word_data(client, sensor->page,
							   sensor->reg);
		}
		pmbus_clear_faults(client);
		data->last_updated = jiffies;
		data->valid = 1;
	}
	mutex_unlock(&data->update_lock);
	return data;
}

/*
 * Convert linear sensor values to milli- or micro-units
 * depending on sensor type.
 */
static int pmbus_reg2data_linear(struct pmbus_data *data,
				 struct pmbus_sensor *sensor)
{
	s16 exponent, mantissa;
	long val;

	if (sensor->class == PSC_VOLTAGE_OUT) {
		exponent = data->exponent;
		mantissa = (s16) sensor->data;
	} else {
		exponent = (sensor->data >> 11) & 0x001f;
		mantissa = sensor->data & 0x07ff;

		if (exponent > 0x0f)
			exponent |= 0xffe0;	/* sign extend exponent */
		if (mantissa > 0x03ff)
			mantissa |= 0xf800;	/* sign extend mantissa */
	}

	val = mantissa;

	/* scale result to milli-units for all sensors except fans */
	if (sensor->class != PSC_FAN)
		val = val * 1000L;

	/* scale result to micro-units for power sensors */
	if (sensor->class == PSC_POWER)
		val = val * 1000L;

	if (exponent >= 0)
		val <<= exponent;
	else
		val >>= -exponent;

	return (int)val;
}

/*
 * Convert direct sensor values to milli- or micro-units
 * depending on sensor type.
 */
static int pmbus_reg2data_direct(struct pmbus_data *data,
				 struct pmbus_sensor *sensor)
{
	long val = (s16) sensor->data;
	long m, b, R;

	m = data->info->m[sensor->class];
	b = data->info->b[sensor->class];
	R = data->info->R[sensor->class];

	if (m == 0)
		return 0;

	/* X = 1/m * (Y * 10^-R - b) */
	R = -R;
	/* scale result to milli-units for everything but fans */
	if (sensor->class != PSC_FAN) {
		R += 3;
		b *= 1000;
	}

	/* scale result to micro-units for power sensors */
	if (sensor->class == PSC_POWER) {
		R += 3;
		b *= 1000;
	}

	while (R > 0) {
		val *= 10;
		R--;
	}
	while (R < 0) {
		val = DIV_ROUND_CLOSEST(val, 10);
		R++;
	}

	return (int)((val - b) / m);
}

static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
{
	int val;

	if (data->info->direct[sensor->class])
		val = pmbus_reg2data_direct(data, sensor);
	else
		val = pmbus_reg2data_linear(data, sensor);

	return val;
}

#define MAX_MANTISSA	(1023 * 1000)
#define MIN_MANTISSA	(511 * 1000)

static u16 pmbus_data2reg_linear(struct pmbus_data *data,
				 enum pmbus_sensor_classes class, long val)
{
	s16 exponent = 0, mantissa = 0;
	bool negative = false;

	/* simple case */
	if (val == 0)
		return 0;

	if (val < 0) {
		negative = true;
		val = -val;
	}

	if (class == PSC_VOLTAGE_OUT) {
		/*
		 * For a static exponents, we don't have a choice
		 * but to adjust the value to it.
		 */
		if (data->exponent < 0)
			val <<= -data->exponent;
		else
			val >>= data->exponent;
		val = DIV_ROUND_CLOSEST(val, 1000);
		if (val > 0x7fff)
			val = 0x7fff;
		return negative ? -val : val;
	}

	/* Power is in uW. Convert to mW before converting. */
	if (class == PSC_POWER)
		val = DIV_ROUND_CLOSEST(val, 1000L);

	/*
	 * For simplicity, convert fan data to milli-units
	 * before calculating the exponent.
	 */
	if (class == PSC_FAN)
		val = val * 1000;

	/* Reduce large mantissa until it fits into 10 bit */
	while (val >= MAX_MANTISSA && exponent < 15) {
		exponent++;
		val >>= 1;
	}
	/* Increase small mantissa to improve precision */
	while (val < MIN_MANTISSA && exponent > -15) {
		exponent--;
		val <<= 1;
	}

	/* Convert mantissa from milli-units to units */
	mantissa = DIV_ROUND_CLOSEST(val, 1000);

	/* Ensure that resulting number is within range */
	if (mantissa > 0x3ff)
		mantissa = 0x3ff;

	/* restore sign */
	if (negative)
		mantissa = -mantissa;

	/* Convert to 5 bit exponent, 11 bit mantissa */
	return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
}

static u16 pmbus_data2reg_direct(struct pmbus_data *data,
				 enum pmbus_sensor_classes class, long val)
{
	long m, b, R;

	m = data->info->m[class];
	b = data->info->b[class];
	R = data->info->R[class];

	/* Power is in uW. Adjust R and b. */
	if (class == PSC_POWER) {
		R -= 3;
		b *= 1000;
	}

	/* Calculate Y = (m * X + b) * 10^R */
	if (class != PSC_FAN) {
		R -= 3;		/* Adjust R and b for data in milli-units */
		b *= 1000;
	}
	val = val * m + b;

	while (R > 0) {
		val *= 10;
		R--;
	}
	while (R < 0) {
		val = DIV_ROUND_CLOSEST(val, 10);
		R++;
	}

	return val;
}

static u16 pmbus_data2reg(struct pmbus_data *data,
			  enum pmbus_sensor_classes class, long val)
{
	u16 regval;

	if (data->info->direct[class])
		regval = pmbus_data2reg_direct(data, class, val);
	else
		regval = pmbus_data2reg_linear(data, class, val);

	return regval;
}

/*
 * Return boolean calculated from converted data.
 * <index> defines a status register index and mask, and optionally
 * two sensor indexes.
 * The upper half-word references the two sensors,
 * two sensor indices.
 * The upper half-word references the two optional sensors,
 * the lower half word references status register and mask.
 * The function returns true if (status[reg] & mask) is true and,
 * if specified, if v1 >= v2.
 * To determine if an object exceeds upper limits, specify <v, limit>.
 * To determine if an object exceeds lower limits, specify <limit, v>.
 *
 * For booleans created with pmbus_add_boolean_reg(), only the lower 16 bits of
 * index are set. s1 and s2 (the sensor index values) are zero in this case.
 * The function returns true if (status[reg] & mask) is true.
 *
 * If the boolean was created with pmbus_add_boolean_cmp(), a comparison against
 * a specified limit has to be performed to determine the boolean result.
 * In this case, the function returns true if v1 >= v2 (where v1 and v2 are
 * sensor values referenced by sensor indices s1 and s2).
 *
 * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>.
 * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>.
 *
 * If a negative value is stored in any of the referenced registers, this value
 * reflects an error code which will be returned.
 */
static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val)
{
	u8 s1 = (index >> 24) & 0xff;
	u8 s2 = (index >> 16) & 0xff;
	u8 reg = (index >> 8) & 0xff;
	u8 mask = index & 0xff;
	int status;
	u8 regval;

	status = data->status[reg];
	if (status < 0)
		return status;

	regval = status & mask;
	if (!s1 && !s2)
		*val = !!regval;
	else {
		int v1, v2;
		struct pmbus_sensor *sensor1, *sensor2;

		sensor1 = &data->sensors[s1];
		if (sensor1->data < 0)
			return sensor1->data;
		sensor2 = &data->sensors[s2];
		if (sensor2->data < 0)
			return sensor2->data;

		v1 = pmbus_reg2data(data, sensor1);
		v2 = pmbus_reg2data(data, sensor2);
		*val = !!(regval && v1 >= v2);
	}
	return 0;
}

static ssize_t pmbus_show_boolean(struct device *dev,
				  struct device_attribute *da, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct pmbus_data *data = pmbus_update_device(dev);
	int val;
	int err;

	err = pmbus_get_boolean(data, attr->index, &val);
	if (err)
		return err;
	return snprintf(buf, PAGE_SIZE, "%d\n", val);
}

static ssize_t pmbus_show_sensor(struct device *dev,
				 struct device_attribute *da, char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct pmbus_data *data = pmbus_update_device(dev);
	struct pmbus_sensor *sensor;

	sensor = &data->sensors[attr->index];
	if (sensor->data < 0)
		return sensor->data;

	return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor));
}

static ssize_t pmbus_set_sensor(struct device *dev,
				struct device_attribute *devattr,
				const char *buf, size_t count)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
	struct i2c_client *client = to_i2c_client(dev);
	struct pmbus_data *data = i2c_get_clientdata(client);
	struct pmbus_sensor *sensor = &data->sensors[attr->index];
	ssize_t rv = count;
	long val = 0;
	int ret;
	u16 regval;

	if (strict_strtol(buf, 10, &val) < 0)
		return -EINVAL;

	mutex_lock(&data->update_lock);
	regval = pmbus_data2reg(data, sensor->class, val);
	ret = pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
	if (ret < 0)
		rv = ret;
	else
		data->sensors[attr->index].data = regval;
	mutex_unlock(&data->update_lock);
	return rv;
}

static ssize_t pmbus_show_label(struct device *dev,
				struct device_attribute *da, char *buf)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct pmbus_data *data = i2c_get_clientdata(client);
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);

	return snprintf(buf, PAGE_SIZE, "%s\n",
			data->labels[attr->index].label);
}

#define PMBUS_ADD_ATTR(data, _name, _idx, _mode, _type, _show, _set)	\
do {									\
	struct sensor_device_attribute *a				\
	    = &data->_type##s[data->num_##_type##s].attribute;		\
	BUG_ON(data->num_attributes >= data->max_attributes);		\
	a->dev_attr.attr.name = _name;					\
	a->dev_attr.attr.mode = _mode;					\
	a->dev_attr.show = _show;					\
	a->dev_attr.store = _set;					\
	a->index = _idx;						\
	data->attributes[data->num_attributes] = &a->dev_attr.attr;	\
	data->num_attributes++;						\
} while (0)

#define PMBUS_ADD_GET_ATTR(data, _name, _type, _idx)			\
	PMBUS_ADD_ATTR(data, _name, _idx, S_IRUGO, _type,		\
		       pmbus_show_##_type,  NULL)

#define PMBUS_ADD_SET_ATTR(data, _name, _type, _idx)			\
	PMBUS_ADD_ATTR(data, _name, _idx, S_IWUSR | S_IRUGO, _type,	\
		       pmbus_show_##_type, pmbus_set_##_type)

static void pmbus_add_boolean(struct pmbus_data *data,
			      const char *name, const char *type, int seq,
			      int idx)
{
	struct pmbus_boolean *boolean;

	BUG_ON(data->num_booleans >= data->max_booleans);

	boolean = &data->booleans[data->num_booleans];

	snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s",
		 name, seq, type);
	PMBUS_ADD_GET_ATTR(data, boolean->name, boolean, idx);
	data->num_booleans++;
}

static void pmbus_add_boolean_reg(struct pmbus_data *data,
				  const char *name, const char *type,
				  int seq, int reg, int bit)
{
	pmbus_add_boolean(data, name, type, seq, (reg << 8) | bit);
}

static void pmbus_add_boolean_cmp(struct pmbus_data *data,
				  const char *name, const char *type,
				  int seq, int i1, int i2, int reg, int mask)
{
	pmbus_add_boolean(data, name, type, seq,
			  (i1 << 24) | (i2 << 16) | (reg << 8) | mask);
}

static void pmbus_add_sensor(struct pmbus_data *data,
			     const char *name, const char *type, int seq,
			     int page, int reg, enum pmbus_sensor_classes class,
			     bool update)
{
	struct pmbus_sensor *sensor;

	BUG_ON(data->num_sensors >= data->max_sensors);

	sensor = &data->sensors[data->num_sensors];
	snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
		 name, seq, type);
	sensor->page = page;
	sensor->reg = reg;
	sensor->class = class;
	sensor->update = update;
	if (update)
		PMBUS_ADD_GET_ATTR(data, sensor->name, sensor,
				   data->num_sensors);
	else
		PMBUS_ADD_SET_ATTR(data, sensor->name, sensor,
				   data->num_sensors);
	data->num_sensors++;
}

static void pmbus_add_label(struct pmbus_data *data,
			    const char *name, int seq,
			    const char *lstring, int index)
{
	struct pmbus_label *label;

	BUG_ON(data->num_labels >= data->max_labels);

	label = &data->labels[data->num_labels];
	snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
	if (!index)
		strncpy(label->label, lstring, sizeof(label->label) - 1);
	else
		snprintf(label->label, sizeof(label->label), "%s%d", lstring,
			 index);

	PMBUS_ADD_GET_ATTR(data, label->name, label, data->num_labels);
	data->num_labels++;
}

static const int pmbus_temp_registers[] = {
	PMBUS_READ_TEMPERATURE_1,
	PMBUS_READ_TEMPERATURE_2,
	PMBUS_READ_TEMPERATURE_3
};

static const int pmbus_fan_registers[] = {
	PMBUS_READ_FAN_SPEED_1,
	PMBUS_READ_FAN_SPEED_2,
	PMBUS_READ_FAN_SPEED_3,
	PMBUS_READ_FAN_SPEED_4
};

static const int pmbus_fan_config_registers[] = {
	PMBUS_FAN_CONFIG_12,
	PMBUS_FAN_CONFIG_12,
	PMBUS_FAN_CONFIG_34,
	PMBUS_FAN_CONFIG_34
};

static const int pmbus_fan_status_registers[] = {
	PMBUS_STATUS_FAN_12,
	PMBUS_STATUS_FAN_12,
	PMBUS_STATUS_FAN_34,
	PMBUS_STATUS_FAN_34
};

static const u32 pmbus_fan_flags[] = {
	PMBUS_HAVE_FAN12,
	PMBUS_HAVE_FAN12,
	PMBUS_HAVE_FAN34,
	PMBUS_HAVE_FAN34
};

static const u32 pmbus_fan_status_flags[] = {
	PMBUS_HAVE_STATUS_FAN12,
	PMBUS_HAVE_STATUS_FAN12,
	PMBUS_HAVE_STATUS_FAN34,
	PMBUS_HAVE_STATUS_FAN34
};

/*
 * Determine maximum number of sensors, booleans, and labels.
 * To keep things simple, only make a rough high estimate.
 */
static void pmbus_find_max_attr(struct i2c_client *client,
				struct pmbus_data *data)
{
	const struct pmbus_driver_info *info = data->info;
	int page, max_sensors, max_booleans, max_labels;

	max_sensors = PMBUS_MAX_INPUT_SENSORS;
	max_booleans = PMBUS_MAX_INPUT_BOOLEANS;
	max_labels = PMBUS_MAX_INPUT_LABELS;

	for (page = 0; page < info->pages; page++) {
		if (info->func[page] & PMBUS_HAVE_VOUT) {
			max_sensors += PMBUS_VOUT_SENSORS_PER_PAGE;
			max_booleans += PMBUS_VOUT_BOOLEANS_PER_PAGE;
			max_labels++;
		}
		if (info->func[page] & PMBUS_HAVE_IOUT) {
			max_sensors += PMBUS_IOUT_SENSORS_PER_PAGE;
			max_booleans += PMBUS_IOUT_BOOLEANS_PER_PAGE;
			max_labels++;
		}
		if (info->func[page] & PMBUS_HAVE_POUT) {
			max_sensors += PMBUS_POUT_SENSORS_PER_PAGE;
			max_booleans += PMBUS_POUT_BOOLEANS_PER_PAGE;
			max_labels++;
		}
		if (info->func[page] & PMBUS_HAVE_FAN12) {
			max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
			max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
		}
		if (info->func[page] & PMBUS_HAVE_FAN34) {
			max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
			max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
		}
		if (info->func[page] & PMBUS_HAVE_TEMP) {
			if (page == 0) {
				max_sensors +=
				    ARRAY_SIZE(pmbus_temp_registers) *
				    PMBUS_MAX_SENSORS_PER_TEMP;
				max_booleans +=
				    ARRAY_SIZE(pmbus_temp_registers) *
				    PMBUS_MAX_BOOLEANS_PER_TEMP;
			} else {
				max_sensors += PMBUS_MAX_SENSORS_PER_TEMP;
				max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP;
			}
		}
	}
	data->max_sensors = max_sensors;
	data->max_booleans = max_booleans;
	data->max_labels = max_labels;
	data->max_attributes = max_sensors + max_booleans + max_labels;
}

/*
 * Search for attributes. Allocate sensors, booleans, and labels as needed.
 */
static void pmbus_find_attributes(struct i2c_client *client,
				  struct pmbus_data *data)
{
	const struct pmbus_driver_info *info = data->info;
	int page, i0, i1, in_index;

	/*
	 * Input voltage sensors
	 */
	in_index = 1;
	if (info->func[0] & PMBUS_HAVE_VIN) {
		bool have_alarm = false;

		i0 = data->num_sensors;
		pmbus_add_label(data, "in", in_index, "vin", 0);
		pmbus_add_sensor(data, "in", "input", in_index,
				 0, PMBUS_READ_VIN, PSC_VOLTAGE_IN, true);
		if (pmbus_check_word_register(client, 0,
					      PMBUS_VIN_UV_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "min", in_index,
					 0, PMBUS_VIN_UV_WARN_LIMIT,
					 PSC_VOLTAGE_IN, false);
			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
				pmbus_add_boolean_reg(data, "in", "min_alarm",
						      in_index,
						      PB_STATUS_INPUT_BASE,
						      PB_VOLTAGE_UV_WARNING);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, 0,
					      PMBUS_VIN_UV_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "lcrit", in_index,
					 0, PMBUS_VIN_UV_FAULT_LIMIT,
					 PSC_VOLTAGE_IN, false);
			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
				pmbus_add_boolean_reg(data, "in", "lcrit_alarm",
						      in_index,
						      PB_STATUS_INPUT_BASE,
						      PB_VOLTAGE_UV_FAULT);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, 0,
					      PMBUS_VIN_OV_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "max", in_index,
					 0, PMBUS_VIN_OV_WARN_LIMIT,
					 PSC_VOLTAGE_IN, false);
			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
				pmbus_add_boolean_reg(data, "in", "max_alarm",
						      in_index,
						      PB_STATUS_INPUT_BASE,
						      PB_VOLTAGE_OV_WARNING);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, 0,
					      PMBUS_VIN_OV_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "crit", in_index,
					 0, PMBUS_VIN_OV_FAULT_LIMIT,
					 PSC_VOLTAGE_IN, false);
			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
				pmbus_add_boolean_reg(data, "in", "crit_alarm",
						      in_index,
						      PB_STATUS_INPUT_BASE,
						      PB_VOLTAGE_OV_FAULT);
				have_alarm = true;
			}
		}
		/*
		 * Add generic alarm attribute only if there are no individual
		 * attributes.
		 */
		if (!have_alarm)
			pmbus_add_boolean_reg(data, "in", "alarm",
					      in_index,
					      PB_STATUS_BASE,
					      PB_STATUS_VIN_UV);
		in_index++;
	}
	if (info->func[0] & PMBUS_HAVE_VCAP) {
		pmbus_add_label(data, "in", in_index, "vcap", 0);
		pmbus_add_sensor(data, "in", "input", in_index, 0,
				 PMBUS_READ_VCAP, PSC_VOLTAGE_IN, true);
		in_index++;
	}

	/*
	 * Output voltage sensors
	 */
	for (page = 0; page < info->pages; page++) {
		bool have_alarm = false;

		if (!(info->func[page] & PMBUS_HAVE_VOUT))
			continue;

		i0 = data->num_sensors;
		pmbus_add_label(data, "in", in_index, "vout", page + 1);
		pmbus_add_sensor(data, "in", "input", in_index, page,
				 PMBUS_READ_VOUT, PSC_VOLTAGE_OUT, true);
		if (pmbus_check_word_register(client, page,
					      PMBUS_VOUT_UV_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "min", in_index, page,
					 PMBUS_VOUT_UV_WARN_LIMIT,
					 PSC_VOLTAGE_OUT, false);
			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
				pmbus_add_boolean_reg(data, "in", "min_alarm",
						      in_index,
						      PB_STATUS_VOUT_BASE +
						      page,
						      PB_VOLTAGE_UV_WARNING);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, page,
					      PMBUS_VOUT_UV_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "lcrit", in_index, page,
					 PMBUS_VOUT_UV_FAULT_LIMIT,
					 PSC_VOLTAGE_OUT, false);
			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
				pmbus_add_boolean_reg(data, "in", "lcrit_alarm",
						      in_index,
						      PB_STATUS_VOUT_BASE +
						      page,
						      PB_VOLTAGE_UV_FAULT);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, page,
					      PMBUS_VOUT_OV_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "max", in_index, page,
					 PMBUS_VOUT_OV_WARN_LIMIT,
					 PSC_VOLTAGE_OUT, false);
			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
				pmbus_add_boolean_reg(data, "in", "max_alarm",
						      in_index,
						      PB_STATUS_VOUT_BASE +
						      page,
						      PB_VOLTAGE_OV_WARNING);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, page,
					      PMBUS_VOUT_OV_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "in", "crit", in_index, page,
					 PMBUS_VOUT_OV_FAULT_LIMIT,
					 PSC_VOLTAGE_OUT, false);
			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
				pmbus_add_boolean_reg(data, "in", "crit_alarm",
						      in_index,
						      PB_STATUS_VOUT_BASE +
						      page,
						      PB_VOLTAGE_OV_FAULT);
				have_alarm = true;
			}
		}
		/*
		 * Add generic alarm attribute only if there are no individual
		 * attributes.
		 */
		if (!have_alarm)
			pmbus_add_boolean_reg(data, "in", "alarm",
					      in_index,
					      PB_STATUS_BASE + page,
					      PB_STATUS_VOUT_OV);
		in_index++;
	}

	/*
	 * Current sensors
	 */

	/*
	 * Input current sensors
	 */
	in_index = 1;
	if (info->func[0] & PMBUS_HAVE_IIN) {
		i0 = data->num_sensors;
		pmbus_add_label(data, "curr", in_index, "iin", 0);
		pmbus_add_sensor(data, "curr", "input", in_index,
				 0, PMBUS_READ_IIN, PSC_CURRENT_IN, true);
		if (pmbus_check_word_register(client, 0,
					      PMBUS_IIN_OC_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "curr", "max", in_index,
					 0, PMBUS_IIN_OC_WARN_LIMIT,
					 PSC_CURRENT_IN, false);
			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
				pmbus_add_boolean_reg(data, "curr", "max_alarm",
						      in_index,
						      PB_STATUS_INPUT_BASE,
						      PB_IIN_OC_WARNING);
			}
		}
		if (pmbus_check_word_register(client, 0,
					      PMBUS_IIN_OC_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "curr", "crit", in_index,
					 0, PMBUS_IIN_OC_FAULT_LIMIT,
					 PSC_CURRENT_IN, false);
			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
				pmbus_add_boolean_reg(data, "curr",
						      "crit_alarm",
						      in_index,
						      PB_STATUS_INPUT_BASE,
						      PB_IIN_OC_FAULT);
		}
		in_index++;
	}

	/*
	 * Output current sensors
	 */
	for (page = 0; page < info->pages; page++) {
		bool have_alarm = false;

		if (!(info->func[page] & PMBUS_HAVE_IOUT))
			continue;

		i0 = data->num_sensors;
		pmbus_add_label(data, "curr", in_index, "iout", page + 1);
		pmbus_add_sensor(data, "curr", "input", in_index, page,
				 PMBUS_READ_IOUT, PSC_CURRENT_OUT, true);
		if (pmbus_check_word_register(client, page,
					      PMBUS_IOUT_OC_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "curr", "max", in_index, page,
					 PMBUS_IOUT_OC_WARN_LIMIT,
					 PSC_CURRENT_OUT, false);
			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) {
				pmbus_add_boolean_reg(data, "curr", "max_alarm",
						      in_index,
						      PB_STATUS_IOUT_BASE +
						      page, PB_IOUT_OC_WARNING);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, page,
					      PMBUS_IOUT_UC_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "curr", "lcrit", in_index, page,
					 PMBUS_IOUT_UC_FAULT_LIMIT,
					 PSC_CURRENT_OUT, false);
			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) {
				pmbus_add_boolean_reg(data, "curr",
						      "lcrit_alarm",
						      in_index,
						      PB_STATUS_IOUT_BASE +
						      page, PB_IOUT_UC_FAULT);
				have_alarm = true;
			}
		}
		if (pmbus_check_word_register(client, page,
					      PMBUS_IOUT_OC_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "curr", "crit", in_index, page,
					 PMBUS_IOUT_OC_FAULT_LIMIT,
					 PSC_CURRENT_OUT, false);
			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) {
				pmbus_add_boolean_reg(data, "curr",
						      "crit_alarm",
						      in_index,
						      PB_STATUS_IOUT_BASE +
						      page, PB_IOUT_OC_FAULT);
				have_alarm = true;
			}
		}
		/*
		 * Add generic alarm attribute only if there are no individual
		 * attributes.
		 */
		if (!have_alarm)
			pmbus_add_boolean_reg(data, "curr", "alarm",
					      in_index,
					      PB_STATUS_BASE + page,
					      PB_STATUS_IOUT_OC);
		in_index++;
	}

	/*
	 * Power sensors
	 */
	/*
	 * Input Power sensors
	 */
	in_index = 1;
	if (info->func[0] & PMBUS_HAVE_PIN) {
		i0 = data->num_sensors;
		pmbus_add_label(data, "power", in_index, "pin", 0);
		pmbus_add_sensor(data, "power", "input", in_index,
				 0, PMBUS_READ_PIN, PSC_POWER, true);
		if (pmbus_check_word_register(client, 0,
					      PMBUS_PIN_OP_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "power", "max", in_index,
					 0, PMBUS_PIN_OP_WARN_LIMIT, PSC_POWER,
					 false);
			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
				pmbus_add_boolean_reg(data, "power",
						      "alarm",
						      in_index,
						      PB_STATUS_INPUT_BASE,
						      PB_PIN_OP_WARNING);
		}
		in_index++;
	}

	/*
	 * Output Power sensors
	 */
	for (page = 0; page < info->pages; page++) {
		bool need_alarm = false;

		if (!(info->func[page] & PMBUS_HAVE_POUT))
			continue;

		i0 = data->num_sensors;
		pmbus_add_label(data, "power", in_index, "pout", page + 1);
		pmbus_add_sensor(data, "power", "input", in_index, page,
				 PMBUS_READ_POUT, PSC_POWER, true);
		/*
		 * Per hwmon sysfs API, power_cap is to be used to limit output
		 * power.
		 * We have two registers related to maximum output power,
		 * PMBUS_POUT_MAX and PMBUS_POUT_OP_WARN_LIMIT.
		 * PMBUS_POUT_MAX matches the powerX_cap attribute definition.
		 * There is no attribute in the API to match
		 * PMBUS_POUT_OP_WARN_LIMIT. We use powerX_max for now.
		 */
		if (pmbus_check_word_register(client, page, PMBUS_POUT_MAX)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "power", "cap", in_index, page,
					 PMBUS_POUT_MAX, PSC_POWER, false);
			need_alarm = true;
		}
		if (pmbus_check_word_register(client, page,
					      PMBUS_POUT_OP_WARN_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "power", "max", in_index, page,
					 PMBUS_POUT_OP_WARN_LIMIT, PSC_POWER,
					 false);
			need_alarm = true;
		}
		if (need_alarm && (info->func[page] & PMBUS_HAVE_STATUS_IOUT))
			pmbus_add_boolean_reg(data, "power", "alarm",
					      in_index,
					      PB_STATUS_IOUT_BASE + page,
					      PB_POUT_OP_WARNING
					      | PB_POWER_LIMITING);

		if (pmbus_check_word_register(client, page,
					      PMBUS_POUT_OP_FAULT_LIMIT)) {
			i1 = data->num_sensors;
			pmbus_add_sensor(data, "power", "crit", in_index, page,
					 PMBUS_POUT_OP_FAULT_LIMIT, PSC_POWER,
					 false);
			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT)
				pmbus_add_boolean_reg(data, "power",
						      "crit_alarm",
						      in_index,
						      PB_STATUS_IOUT_BASE
						      + page,
						      PB_POUT_OP_FAULT);
		}
		in_index++;
	}

	/*
	 * Temperature sensors
	 */
	in_index = 1;
	for (page = 0; page < info->pages; page++) {
		int t, temps;

		if (!(info->func[page] & PMBUS_HAVE_TEMP))
			continue;

		temps = page ? 1 : ARRAY_SIZE(pmbus_temp_registers);
		for (t = 0; t < temps; t++) {
			bool have_alarm = false;

			if (!pmbus_check_word_register
			    (client, page, pmbus_temp_registers[t]))
				break;

			i0 = data->num_sensors;
			pmbus_add_sensor(data, "temp", "input", in_index, page,
					 pmbus_temp_registers[t],
					 PSC_TEMPERATURE, true);

			/*
			 * PMBus provides only one status register for TEMP1-3.
			 * Thus, we can not use the status register to determine
			 * which of the three sensors actually caused an alarm.
			 * Always compare current temperature against the limit
			 * registers to determine alarm conditions for a
			 * specific sensor.
			 */
			if (pmbus_check_word_register
			    (client, page, PMBUS_UT_WARN_LIMIT)) {
				i1 = data->num_sensors;
				pmbus_add_sensor(data, "temp", "min", in_index,
						 page, PMBUS_UT_WARN_LIMIT,
						 PSC_TEMPERATURE, false);
				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
					pmbus_add_boolean_cmp(data, "temp",
						"min_alarm", in_index, i1, i0,
						PB_STATUS_TEMP_BASE + page,
						PB_TEMP_UT_WARNING);
					have_alarm = true;
				}
			}
			if (pmbus_check_word_register(client, page,
						      PMBUS_UT_FAULT_LIMIT)) {
				i1 = data->num_sensors;
				pmbus_add_sensor(data, "temp", "lcrit",
						 in_index, page,
						 PMBUS_UT_FAULT_LIMIT,
						 PSC_TEMPERATURE, false);
				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
					pmbus_add_boolean_cmp(data, "temp",
						"lcrit_alarm", in_index, i1, i0,
						PB_STATUS_TEMP_BASE + page,
						PB_TEMP_UT_FAULT);
					have_alarm = true;
				}
			}
			if (pmbus_check_word_register
			    (client, page, PMBUS_OT_WARN_LIMIT)) {
				i1 = data->num_sensors;
				pmbus_add_sensor(data, "temp", "max", in_index,
						 page, PMBUS_OT_WARN_LIMIT,
						 PSC_TEMPERATURE, false);
				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
					pmbus_add_boolean_cmp(data, "temp",
						"max_alarm", in_index, i0, i1,
						PB_STATUS_TEMP_BASE + page,
						PB_TEMP_OT_WARNING);
					have_alarm = true;
				}
			}
			if (pmbus_check_word_register(client, page,
						      PMBUS_OT_FAULT_LIMIT)) {
				i1 = data->num_sensors;
				pmbus_add_sensor(data, "temp", "crit", in_index,
						 page, PMBUS_OT_FAULT_LIMIT,
						 PSC_TEMPERATURE, false);
				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
					pmbus_add_boolean_cmp(data, "temp",
						"crit_alarm", in_index, i0, i1,
						PB_STATUS_TEMP_BASE + page,
						PB_TEMP_OT_FAULT);
					have_alarm = true;
				}
			}
			/*
			 * Last resort - we were not able to create any alarm
			 * registers. Report alarm for all sensors using the
			 * status register temperature alarm bit.
			 */
			if (!have_alarm)
				pmbus_add_boolean_reg(data, "temp", "alarm",
						      in_index,
						      PB_STATUS_BASE + page,
						      PB_STATUS_TEMPERATURE);
			in_index++;
		}
	}

	/*
	 * Fans
	 */
	in_index = 1;
	for (page = 0; page < info->pages; page++) {
		int f;

		for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
			int regval;

			if (!(info->func[page] & pmbus_fan_flags[f]))
				break;

			if (!pmbus_check_word_register(client, page,
						       pmbus_fan_registers[f])
			    || !pmbus_check_byte_register(client, page,
						pmbus_fan_config_registers[f]))
				break;

			/*
			 * Skip fan if not installed.
			 * Each fan configuration register covers multiple fans,
			 * so we have to do some magic.
			 */
			regval = pmbus_read_byte_data(client, page,
				pmbus_fan_config_registers[f]);
			if (regval < 0 ||
			    (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
				continue;

			i0 = data->num_sensors;
			pmbus_add_sensor(data, "fan", "input", in_index, page,
					 pmbus_fan_registers[f], PSC_FAN, true);

			/*
			 * Each fan status register covers multiple fans,
			 * so we have to do some magic.
			 */
			if ((info->func[page] & pmbus_fan_status_flags[f]) &&
			    pmbus_check_byte_register(client,
					page, pmbus_fan_status_registers[f])) {
				int base;

				if (f > 1)	/* fan 3, 4 */
					base = PB_STATUS_FAN34_BASE + page;
				else
					base = PB_STATUS_FAN_BASE + page;
				pmbus_add_boolean_reg(data, "fan", "alarm",
					in_index, base,
					PB_FAN_FAN1_WARNING >> (f & 1));
				pmbus_add_boolean_reg(data, "fan", "fault",
					in_index, base,
					PB_FAN_FAN1_FAULT >> (f & 1));
			}
			in_index++;
		}
	}
}

/*
 * Identify chip parameters.
 * This function is called for all chips.
 */
static int pmbus_identify_common(struct i2c_client *client,
				 struct pmbus_data *data)
{
	int vout_mode = -1, exponent;

	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE))
		vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
	if (vout_mode >= 0 && vout_mode != 0xff) {
		/*
		 * Not all chips support the VOUT_MODE command,
		 * so a failure to read it is not an error.
		 */
		switch (vout_mode >> 5) {
		case 0:	/* linear mode      */
			if (data->info->direct[PSC_VOLTAGE_OUT])
				return -ENODEV;

			exponent = vout_mode & 0x1f;
			/* and sign-extend it */
			if (exponent & 0x10)
				exponent |= ~0x1f;
			data->exponent = exponent;
			break;
		case 2:	/* direct mode      */
			if (!data->info->direct[PSC_VOLTAGE_OUT])
				return -ENODEV;
			break;
		default:
			return -ENODEV;
		}
	}

	/* Determine maximum number of sensors, booleans, and labels */
	pmbus_find_max_attr(client, data);
	pmbus_clear_fault_page(client, 0);
	return 0;
}

int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
		   struct pmbus_driver_info *info)
{
	const struct pmbus_platform_data *pdata = client->dev.platform_data;
	struct pmbus_data *data;
	int ret;

	if (!info) {
		dev_err(&client->dev, "Missing chip information");
		return -ENODEV;
	}

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
				     | I2C_FUNC_SMBUS_BYTE_DATA
				     | I2C_FUNC_SMBUS_WORD_DATA))
		return -ENODEV;

	data = kzalloc(sizeof(*data), GFP_KERNEL);
	if (!data) {
		dev_err(&client->dev, "No memory to allocate driver data\n");
		return -ENOMEM;
	}

	i2c_set_clientdata(client, data);
	mutex_init(&data->update_lock);

	/*
	 * Bail out if status register or PMBus revision register
	 * does not exist.
	 */
	if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0
	    || i2c_smbus_read_byte_data(client, PMBUS_REVISION) < 0) {
		dev_err(&client->dev,
			"Status or revision register not found\n");
		ret = -ENODEV;
		goto out_data;
	}

	if (pdata)
		data->flags = pdata->flags;
	data->info = info;

	pmbus_clear_faults(client);

	if (info->identify) {
		ret = (*info->identify)(client, info);
		if (ret < 0) {
			dev_err(&client->dev, "Chip identification failed\n");
			goto out_data;
		}
	}

	if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
		dev_err(&client->dev, "Bad number of PMBus pages: %d\n",
			info->pages);
		ret = -EINVAL;
		goto out_data;
	}
	/*
	 * Bail out if more than one page was configured, but we can not
	 * select the highest page. This is an indication that the wrong
	 * chip type was selected. Better bail out now than keep
	 * returning errors later on.
	 */
	if (info->pages > 1 && pmbus_set_page(client, info->pages - 1) < 0) {
		dev_err(&client->dev, "Failed to select page %d\n",
			info->pages - 1);
		ret = -EINVAL;
		goto out_data;
	}

	ret = pmbus_identify_common(client, data);
	if (ret < 0) {
		dev_err(&client->dev, "Failed to identify chip capabilities\n");
		goto out_data;
	}

	ret = -ENOMEM;
	data->sensors = kzalloc(sizeof(struct pmbus_sensor) * data->max_sensors,
				GFP_KERNEL);
	if (!data->sensors) {
		dev_err(&client->dev, "No memory to allocate sensor data\n");
		goto out_data;
	}

	data->booleans = kzalloc(sizeof(struct pmbus_boolean)
				 * data->max_booleans, GFP_KERNEL);
	if (!data->booleans) {
		dev_err(&client->dev, "No memory to allocate boolean data\n");
		goto out_sensors;
	}

	data->labels = kzalloc(sizeof(struct pmbus_label) * data->max_labels,
			       GFP_KERNEL);
	if (!data->labels) {
		dev_err(&client->dev, "No memory to allocate label data\n");
		goto out_booleans;
	}

	data->attributes = kzalloc(sizeof(struct attribute *)
				   * data->max_attributes, GFP_KERNEL);
	if (!data->attributes) {
		dev_err(&client->dev, "No memory to allocate attribute data\n");
		goto out_labels;
	}

	pmbus_find_attributes(client, data);

	/*
	 * If there are no attributes, something is wrong.
	 * Bail out instead of trying to register nothing.
	 */
	if (!data->num_attributes) {
		dev_err(&client->dev, "No attributes found\n");
		ret = -ENODEV;
		goto out_attributes;
	}

	/* Register sysfs hooks */
	data->group.attrs = data->attributes;
	ret = sysfs_create_group(&client->dev.kobj, &data->group);
	if (ret) {
		dev_err(&client->dev, "Failed to create sysfs entries\n");
		goto out_attributes;
	}
	data->hwmon_dev = hwmon_device_register(&client->dev);
	if (IS_ERR(data->hwmon_dev)) {
		ret = PTR_ERR(data->hwmon_dev);
		dev_err(&client->dev, "Failed to register hwmon device\n");
		goto out_hwmon_device_register;
	}
	return 0;

out_hwmon_device_register:
	sysfs_remove_group(&client->dev.kobj, &data->group);
out_attributes:
	kfree(data->attributes);
out_labels:
	kfree(data->labels);
out_booleans:
	kfree(data->booleans);
out_sensors:
	kfree(data->sensors);
out_data:
	kfree(data);
	return ret;
}
EXPORT_SYMBOL_GPL(pmbus_do_probe);

int pmbus_do_remove(struct i2c_client *client)
{
	struct pmbus_data *data = i2c_get_clientdata(client);
	hwmon_device_unregister(data->hwmon_dev);
	sysfs_remove_group(&client->dev.kobj, &data->group);
	kfree(data->attributes);
	kfree(data->labels);
	kfree(data->booleans);
	kfree(data->sensors);
	kfree(data);
	return 0;
}
EXPORT_SYMBOL_GPL(pmbus_do_remove);

MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus core driver");
MODULE_LICENSE("GPL");