| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125 |
- #
- # USB Storage driver configuration
- #
- comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
- depends on USB
- config USB_STORAGE
- tristate "USB Mass Storage support"
- depends on USB
- select SCSI
- ---help---
- Say Y here if you want to connect USB mass storage devices to your
- computer's USB port. This is the driver you need for USB
- floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
- USB flash devices, and memory sticks, along with
- similar devices. This driver may also be used for some cameras
- and card readers.
- This option 'selects' (turns on, enables) 'SCSI', but you
- probably also need 'SCSI device support: SCSI disk support'
- (BLK_DEV_SD) for most USB storage devices.
- To compile this driver as a module, choose M here: the
- module will be called usb-storage.
- config USB_STORAGE_DEBUG
- bool "USB Mass Storage verbose debug"
- depends on USB_STORAGE
- help
- Say Y here in order to have the USB Mass Storage code generate
- verbose debugging messages.
- config USB_STORAGE_DATAFAB
- bool "Datafab Compact Flash Reader support (EXPERIMENTAL)"
- depends on USB_STORAGE && EXPERIMENTAL
- help
- Support for certain Datafab CompactFlash readers.
- Datafab has a web page at <http://www.datafabusa.com/>.
- config USB_STORAGE_FREECOM
- bool "Freecom USB/ATAPI Bridge support"
- depends on USB_STORAGE
- help
- Support for the Freecom USB to IDE/ATAPI adaptor.
- Freecom has a web page at <http://www.freecom.de/>.
- config USB_STORAGE_ISD200
- bool "ISD-200 USB/ATA Bridge support"
- depends on USB_STORAGE && BLK_DEV_IDE
- ---help---
- Say Y here if you want to use USB Mass Store devices based
- on the In-Systems Design ISD-200 USB/ATA bridge.
- Some of the products that use this chip are:
- - Archos Jukebox 6000
- - ISD SmartCable for Storage
- - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
- - Sony CRX10U CD-R/RW drive
- - CyQ've CQ8060A CDRW drive
- - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
- config USB_STORAGE_DPCM
- bool "Microtech/ZiO! CompactFlash/SmartMedia support"
- depends on USB_STORAGE
- help
- Say Y here to support the Microtech/ZiO! CompactFlash reader.
- There is a web page at <http://www.ziocorp.com/products/>.
- config USB_STORAGE_USBAT
- bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)"
- depends on USB_STORAGE && EXPERIMENTAL
- help
- Say Y here to include additional code to support storage devices
- based on the SCM/Shuttle USBAT/USBAT02 processors.
- Devices reported to work with this driver include:
- - CompactFlash reader included with Kodak DC3800 camera
- - Dane-Elec Zmate CompactFlash reader
- - Delkin Efilm reader2
- - HP 8200e/8210e/8230e CD-Writer Plus drives
- - I-JAM JS-50U
- - Jessops CompactFlash JESDCFRU BLACK
- - Kingston Technology PCREAD-USB/CF
- - Maxell UA4 CompactFlash reader
- - Memorex UCF-100
- - Microtech ZiO! ICS-45 CF2
- - RCA LYRA MP3 portable
- - Sandisk ImageMate SDDR-05b
- config USB_STORAGE_SDDR09
- bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)"
- depends on USB_STORAGE && EXPERIMENTAL
- help
- Say Y here to include additional code to support the Sandisk SDDR-09
- SmartMedia reader in the USB Mass Storage driver.
- Also works for the Microtech Zio! SmartMedia reader.
- config USB_STORAGE_SDDR55
- bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)"
- depends on USB_STORAGE && EXPERIMENTAL
- help
- Say Y here to include additional code to support the Sandisk SDDR-55
- SmartMedia reader in the USB Mass Storage driver.
- config USB_STORAGE_JUMPSHOT
- bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)"
- depends on USB_STORAGE && EXPERIMENTAL
- help
- Say Y here to include additional code to support the Lexar Jumpshot
- USB CompactFlash reader.
- config USB_STORAGE_ONETOUCH
- bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
- depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL
- help
- Say Y here to include additional code to support the Maxtor OneTouch
- USB hard drive's onetouch button.
- This code registers the button on the front of Maxtor OneTouch USB
- hard drive's as an input device. An action can be associated with
- this input in any keybinding software. (e.g. gnome's keyboard short-
- cuts)
|
