123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623 |
- /*
- * linux/drivers/mmc/pxa.c - PXA MMCI driver
- *
- * Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This hardware is really sick:
- * - No way to clear interrupts.
- * - Have to turn off the clock whenever we touch the device.
- * - Doesn't tell you how many data blocks were transferred.
- * Yuck!
- *
- * 1 and 3 byte data transfers not supported
- * max block length up to 1023
- */
- #include <linux/config.h>
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/ioport.h>
- #include <linux/device.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/dma-mapping.h>
- #include <linux/mmc/host.h>
- #include <linux/mmc/protocol.h>
- #include <asm/dma.h>
- #include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/scatterlist.h>
- #include <asm/sizes.h>
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/mmc.h>
- #include "pxamci.h"
- #ifdef CONFIG_MMC_DEBUG
- #define DBG(x...) printk(KERN_DEBUG x)
- #else
- #define DBG(x...) do { } while (0)
- #endif
- #define DRIVER_NAME "pxa2xx-mci"
- #define NR_SG 1
- struct pxamci_host {
- struct mmc_host *mmc;
- spinlock_t lock;
- struct resource *res;
- void __iomem *base;
- int irq;
- int dma;
- unsigned int clkrt;
- unsigned int cmdat;
- unsigned int imask;
- unsigned int power_mode;
- struct pxamci_platform_data *pdata;
- struct mmc_request *mrq;
- struct mmc_command *cmd;
- struct mmc_data *data;
- dma_addr_t sg_dma;
- struct pxa_dma_desc *sg_cpu;
- unsigned int dma_len;
- unsigned int dma_dir;
- };
- static inline unsigned int ns_to_clocks(unsigned int ns)
- {
- return (ns * (CLOCKRATE / 1000000) + 999) / 1000;
- }
- static void pxamci_stop_clock(struct pxamci_host *host)
- {
- if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
- unsigned long timeout = 10000;
- unsigned int v;
- writel(STOP_CLOCK, host->base + MMC_STRPCL);
- do {
- v = readl(host->base + MMC_STAT);
- if (!(v & STAT_CLK_EN))
- break;
- udelay(1);
- } while (timeout--);
- if (v & STAT_CLK_EN)
- dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
- }
- }
- static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
- {
- unsigned long flags;
- spin_lock_irqsave(&host->lock, flags);
- host->imask &= ~mask;
- writel(host->imask, host->base + MMC_I_MASK);
- spin_unlock_irqrestore(&host->lock, flags);
- }
- static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
- {
- unsigned long flags;
- spin_lock_irqsave(&host->lock, flags);
- host->imask |= mask;
- writel(host->imask, host->base + MMC_I_MASK);
- spin_unlock_irqrestore(&host->lock, flags);
- }
- static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
- {
- unsigned int nob = data->blocks;
- unsigned int timeout;
- u32 dcmd;
- int i;
- host->data = data;
- if (data->flags & MMC_DATA_STREAM)
- nob = 0xffff;
- writel(nob, host->base + MMC_NOB);
- writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
- timeout = ns_to_clocks(data->timeout_ns) + data->timeout_clks;
- writel((timeout + 255) / 256, host->base + MMC_RDTO);
- if (data->flags & MMC_DATA_READ) {
- host->dma_dir = DMA_FROM_DEVICE;
- dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
- DRCMRTXMMC = 0;
- DRCMRRXMMC = host->dma | DRCMR_MAPVLD;
- } else {
- host->dma_dir = DMA_TO_DEVICE;
- dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
- DRCMRRXMMC = 0;
- DRCMRTXMMC = host->dma | DRCMR_MAPVLD;
- }
- dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
- host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- host->dma_dir);
- for (i = 0; i < host->dma_len; i++) {
- if (data->flags & MMC_DATA_READ) {
- host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
- host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
- } else {
- host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
- host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
- }
- host->sg_cpu[i].dcmd = dcmd | sg_dma_len(&data->sg[i]);
- host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
- sizeof(struct pxa_dma_desc);
- }
- host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
- wmb();
- DDADR(host->dma) = host->sg_dma;
- DCSR(host->dma) = DCSR_RUN;
- }
- static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
- {
- WARN_ON(host->cmd != NULL);
- host->cmd = cmd;
- if (cmd->flags & MMC_RSP_BUSY)
- cmdat |= CMDAT_BUSY;
- switch (cmd->flags & (MMC_RSP_MASK | MMC_RSP_CRC)) {
- case MMC_RSP_SHORT | MMC_RSP_CRC:
- cmdat |= CMDAT_RESP_SHORT;
- break;
- case MMC_RSP_SHORT:
- cmdat |= CMDAT_RESP_R3;
- break;
- case MMC_RSP_LONG | MMC_RSP_CRC:
- cmdat |= CMDAT_RESP_R2;
- break;
- default:
- break;
- }
- writel(cmd->opcode, host->base + MMC_CMD);
- writel(cmd->arg >> 16, host->base + MMC_ARGH);
- writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
- writel(cmdat, host->base + MMC_CMDAT);
- writel(host->clkrt, host->base + MMC_CLKRT);
- writel(START_CLOCK, host->base + MMC_STRPCL);
- pxamci_enable_irq(host, END_CMD_RES);
- }
- static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
- {
- DBG("PXAMCI: request done\n");
- host->mrq = NULL;
- host->cmd = NULL;
- host->data = NULL;
- mmc_request_done(host->mmc, mrq);
- }
- static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
- {
- struct mmc_command *cmd = host->cmd;
- int i;
- u32 v;
- if (!cmd)
- return 0;
- host->cmd = NULL;
- /*
- * Did I mention this is Sick. We always need to
- * discard the upper 8 bits of the first 16-bit word.
- */
- v = readl(host->base + MMC_RES) & 0xffff;
- for (i = 0; i < 4; i++) {
- u32 w1 = readl(host->base + MMC_RES) & 0xffff;
- u32 w2 = readl(host->base + MMC_RES) & 0xffff;
- cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
- v = w2;
- }
- if (stat & STAT_TIME_OUT_RESPONSE) {
- cmd->error = MMC_ERR_TIMEOUT;
- } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
- #ifdef CONFIG_PXA27x
- /*
- * workaround for erratum #42:
- * Intel PXA27x Family Processor Specification Update Rev 001
- */
- if (cmd->opcode == MMC_ALL_SEND_CID ||
- cmd->opcode == MMC_SEND_CSD ||
- cmd->opcode == MMC_SEND_CID) {
- /* a bogus CRC error can appear if the msb of
- the 15 byte response is a one */
- if ((cmd->resp[0] & 0x80000000) == 0)
- cmd->error = MMC_ERR_BADCRC;
- } else {
- DBG("ignoring CRC from command %d - *risky*\n",cmd->opcode);
- }
- #else
- cmd->error = MMC_ERR_BADCRC;
- #endif
- }
- pxamci_disable_irq(host, END_CMD_RES);
- if (host->data && cmd->error == MMC_ERR_NONE) {
- pxamci_enable_irq(host, DATA_TRAN_DONE);
- } else {
- pxamci_finish_request(host, host->mrq);
- }
- return 1;
- }
- static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
- {
- struct mmc_data *data = host->data;
- if (!data)
- return 0;
- DCSR(host->dma) = 0;
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
- host->dma_dir);
- if (stat & STAT_READ_TIME_OUT)
- data->error = MMC_ERR_TIMEOUT;
- else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
- data->error = MMC_ERR_BADCRC;
- /*
- * There appears to be a hardware design bug here. There seems to
- * be no way to find out how much data was transferred to the card.
- * This means that if there was an error on any block, we mark all
- * data blocks as being in error.
- */
- if (data->error == MMC_ERR_NONE)
- data->bytes_xfered = data->blocks << data->blksz_bits;
- else
- data->bytes_xfered = 0;
- pxamci_disable_irq(host, DATA_TRAN_DONE);
- host->data = NULL;
- if (host->mrq->stop && data->error == MMC_ERR_NONE) {
- pxamci_stop_clock(host);
- pxamci_start_cmd(host, host->mrq->stop, 0);
- } else {
- pxamci_finish_request(host, host->mrq);
- }
- return 1;
- }
- static irqreturn_t pxamci_irq(int irq, void *devid, struct pt_regs *regs)
- {
- struct pxamci_host *host = devid;
- unsigned int ireg;
- int handled = 0;
- ireg = readl(host->base + MMC_I_REG);
- DBG("PXAMCI: irq %08x\n", ireg);
- if (ireg) {
- unsigned stat = readl(host->base + MMC_STAT);
- DBG("PXAMCI: stat %08x\n", stat);
- if (ireg & END_CMD_RES)
- handled |= pxamci_cmd_done(host, stat);
- if (ireg & DATA_TRAN_DONE)
- handled |= pxamci_data_done(host, stat);
- }
- return IRQ_RETVAL(handled);
- }
- static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
- {
- struct pxamci_host *host = mmc_priv(mmc);
- unsigned int cmdat;
- WARN_ON(host->mrq != NULL);
- host->mrq = mrq;
- pxamci_stop_clock(host);
- cmdat = host->cmdat;
- host->cmdat &= ~CMDAT_INIT;
- if (mrq->data) {
- pxamci_setup_data(host, mrq->data);
- cmdat &= ~CMDAT_BUSY;
- cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
- if (mrq->data->flags & MMC_DATA_WRITE)
- cmdat |= CMDAT_WRITE;
- if (mrq->data->flags & MMC_DATA_STREAM)
- cmdat |= CMDAT_STREAM;
- }
- pxamci_start_cmd(host, mrq->cmd, cmdat);
- }
- static int pxamci_get_ro(struct mmc_host *mmc)
- {
- struct pxamci_host *host = mmc_priv(mmc);
- if (host->pdata && host->pdata->get_ro)
- return host->pdata->get_ro(mmc->dev);
- /* Host doesn't support read only detection so assume writeable */
- return 0;
- }
- static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
- {
- struct pxamci_host *host = mmc_priv(mmc);
- DBG("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
- ios->clock, ios->power_mode, ios->vdd / 100,
- ios->vdd % 100);
- if (ios->clock) {
- unsigned int clk = CLOCKRATE / ios->clock;
- if (CLOCKRATE / clk > ios->clock)
- clk <<= 1;
- host->clkrt = fls(clk) - 1;
- pxa_set_cken(CKEN12_MMC, 1);
- /*
- * we write clkrt on the next command
- */
- } else {
- pxamci_stop_clock(host);
- pxa_set_cken(CKEN12_MMC, 0);
- }
- if (host->power_mode != ios->power_mode) {
- host->power_mode = ios->power_mode;
- if (host->pdata && host->pdata->setpower)
- host->pdata->setpower(mmc->dev, ios->vdd);
- if (ios->power_mode == MMC_POWER_ON)
- host->cmdat |= CMDAT_INIT;
- }
- DBG("pxamci_set_ios: clkrt = %x cmdat = %x\n",
- host->clkrt, host->cmdat);
- }
- static struct mmc_host_ops pxamci_ops = {
- .request = pxamci_request,
- .get_ro = pxamci_get_ro,
- .set_ios = pxamci_set_ios,
- };
- static void pxamci_dma_irq(int dma, void *devid, struct pt_regs *regs)
- {
- printk(KERN_ERR "DMA%d: IRQ???\n", dma);
- DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
- }
- static irqreturn_t pxamci_detect_irq(int irq, void *devid, struct pt_regs *regs)
- {
- struct pxamci_host *host = mmc_priv(devid);
- mmc_detect_change(devid, host->pdata->detect_delay);
- return IRQ_HANDLED;
- }
- static int pxamci_probe(struct device *dev)
- {
- struct platform_device *pdev = to_platform_device(dev);
- struct mmc_host *mmc;
- struct pxamci_host *host = NULL;
- struct resource *r;
- int ret, irq;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_irq(pdev, 0);
- if (!r || irq == NO_IRQ)
- return -ENXIO;
- r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
- if (!r)
- return -EBUSY;
- mmc = mmc_alloc_host(sizeof(struct pxamci_host), dev);
- if (!mmc) {
- ret = -ENOMEM;
- goto out;
- }
- mmc->ops = &pxamci_ops;
- mmc->f_min = CLOCKRATE_MIN;
- mmc->f_max = CLOCKRATE_MAX;
- /*
- * We can do SG-DMA, but we don't because we never know how much
- * data we successfully wrote to the card.
- */
- mmc->max_phys_segs = NR_SG;
- /*
- * Our hardware DMA can handle a maximum of one page per SG entry.
- */
- mmc->max_seg_size = PAGE_SIZE;
- host = mmc_priv(mmc);
- host->mmc = mmc;
- host->dma = -1;
- host->pdata = pdev->dev.platform_data;
- mmc->ocr_avail = host->pdata ?
- host->pdata->ocr_mask :
- MMC_VDD_32_33|MMC_VDD_33_34;
- host->sg_cpu = dma_alloc_coherent(dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
- if (!host->sg_cpu) {
- ret = -ENOMEM;
- goto out;
- }
- spin_lock_init(&host->lock);
- host->res = r;
- host->irq = irq;
- host->imask = MMC_I_MASK_ALL;
- host->base = ioremap(r->start, SZ_4K);
- if (!host->base) {
- ret = -ENOMEM;
- goto out;
- }
- /*
- * Ensure that the host controller is shut down, and setup
- * with our defaults.
- */
- pxamci_stop_clock(host);
- writel(0, host->base + MMC_SPI);
- writel(64, host->base + MMC_RESTO);
- writel(host->imask, host->base + MMC_I_MASK);
- host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
- pxamci_dma_irq, host);
- if (host->dma < 0) {
- ret = -EBUSY;
- goto out;
- }
- ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
- if (ret)
- goto out;
- dev_set_drvdata(dev, mmc);
- if (host->pdata && host->pdata->init)
- host->pdata->init(dev, pxamci_detect_irq, mmc);
- mmc_add_host(mmc);
- return 0;
- out:
- if (host) {
- if (host->dma >= 0)
- pxa_free_dma(host->dma);
- if (host->base)
- iounmap(host->base);
- if (host->sg_cpu)
- dma_free_coherent(dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
- }
- if (mmc)
- mmc_free_host(mmc);
- release_resource(r);
- return ret;
- }
- static int pxamci_remove(struct device *dev)
- {
- struct mmc_host *mmc = dev_get_drvdata(dev);
- dev_set_drvdata(dev, NULL);
- if (mmc) {
- struct pxamci_host *host = mmc_priv(mmc);
- if (host->pdata && host->pdata->exit)
- host->pdata->exit(dev, mmc);
- mmc_remove_host(mmc);
- pxamci_stop_clock(host);
- writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
- END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
- host->base + MMC_I_MASK);
- DRCMRRXMMC = 0;
- DRCMRTXMMC = 0;
- free_irq(host->irq, host);
- pxa_free_dma(host->dma);
- iounmap(host->base);
- dma_free_coherent(dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
- release_resource(host->res);
- mmc_free_host(mmc);
- }
- return 0;
- }
- #ifdef CONFIG_PM
- static int pxamci_suspend(struct device *dev, pm_message_t state, u32 level)
- {
- struct mmc_host *mmc = dev_get_drvdata(dev);
- int ret = 0;
- if (mmc && level == SUSPEND_DISABLE)
- ret = mmc_suspend_host(mmc, state);
- return ret;
- }
- static int pxamci_resume(struct device *dev, u32 level)
- {
- struct mmc_host *mmc = dev_get_drvdata(dev);
- int ret = 0;
- if (mmc && level == RESUME_ENABLE)
- ret = mmc_resume_host(mmc);
- return ret;
- }
- #else
- #define pxamci_suspend NULL
- #define pxamci_resume NULL
- #endif
- static struct device_driver pxamci_driver = {
- .name = DRIVER_NAME,
- .bus = &platform_bus_type,
- .probe = pxamci_probe,
- .remove = pxamci_remove,
- .suspend = pxamci_suspend,
- .resume = pxamci_resume,
- };
- static int __init pxamci_init(void)
- {
- return driver_register(&pxamci_driver);
- }
- static void __exit pxamci_exit(void)
- {
- driver_unregister(&pxamci_driver);
- }
- module_init(pxamci_init);
- module_exit(pxamci_exit);
- MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
- MODULE_LICENSE("GPL");
|