123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412 |
- /*
- * linux/drivers/message/fusion/mptfc.c
- * For use with LSI Logic PCI chip/adapter(s)
- * running LSI Logic Fusion MPT (Message Passing Technology) firmware.
- *
- * Copyright (c) 1999-2005 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
- *
- */
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- /*
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 of the License.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- NO WARRANTY
- THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- solely responsible for determining the appropriateness of using and
- distributing the Program and assumes all risks associated with its
- exercise of rights under this Agreement, including but not limited to
- the risks and costs of program errors, damage to or loss of data,
- programs or equipment, and unavailability or interruption of operations.
- DISCLAIMER OF LIABILITY
- NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- #include "linux_compat.h" /* linux-2.6 tweaks */
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/errno.h>
- #include <linux/kdev_t.h>
- #include <linux/blkdev.h>
- #include <linux/delay.h> /* for mdelay */
- #include <linux/interrupt.h> /* needed for in_interrupt() proto */
- #include <linux/reboot.h> /* notifier code */
- #include <linux/sched.h>
- #include <linux/workqueue.h>
- #include <scsi/scsi.h>
- #include <scsi/scsi_cmnd.h>
- #include <scsi/scsi_device.h>
- #include <scsi/scsi_host.h>
- #include <scsi/scsi_tcq.h>
- #include "mptbase.h"
- #include "mptscsih.h"
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- #define my_NAME "Fusion MPT FC Host driver"
- #define my_VERSION MPT_LINUX_VERSION_COMMON
- #define MYNAM "mptfc"
- MODULE_AUTHOR(MODULEAUTHOR);
- MODULE_DESCRIPTION(my_NAME);
- MODULE_LICENSE("GPL");
- /* Command line args */
- static int mpt_pq_filter = 0;
- module_param(mpt_pq_filter, int, 0);
- MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)");
- static int mptfcDoneCtx = -1;
- static int mptfcTaskCtx = -1;
- static int mptfcInternalCtx = -1; /* Used only for internal commands */
- static struct scsi_host_template mptfc_driver_template = {
- .proc_name = "mptfc",
- .proc_info = mptscsih_proc_info,
- .name = "MPT FC Host",
- .info = mptscsih_info,
- .queuecommand = mptscsih_qcmd,
- .slave_alloc = mptscsih_slave_alloc,
- .slave_configure = mptscsih_slave_configure,
- .slave_destroy = mptscsih_slave_destroy,
- .change_queue_depth = mptscsih_change_queue_depth,
- .eh_abort_handler = mptscsih_abort,
- .eh_device_reset_handler = mptscsih_dev_reset,
- .eh_bus_reset_handler = mptscsih_bus_reset,
- .eh_host_reset_handler = mptscsih_host_reset,
- .bios_param = mptscsih_bios_param,
- .can_queue = MPT_FC_CAN_QUEUE,
- .this_id = -1,
- .sg_tablesize = MPT_SCSI_SG_DEPTH,
- .max_sectors = 8192,
- .cmd_per_lun = 7,
- .use_clustering = ENABLE_CLUSTERING,
- };
- /****************************************************************************
- * Supported hardware
- */
- static struct pci_device_id mptfc_pci_table[] = {
- { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC939X,
- PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949X,
- PCI_ANY_ID, PCI_ANY_ID },
- {0} /* Terminating entry */
- };
- MODULE_DEVICE_TABLE(pci, mptfc_pci_table);
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- /*
- * mptfc_probe - Installs scsi devices per bus.
- * @pdev: Pointer to pci_dev structure
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
- static int
- mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
- {
- struct Scsi_Host *sh;
- MPT_SCSI_HOST *hd;
- MPT_ADAPTER *ioc;
- unsigned long flags;
- int sz, ii;
- int numSGE = 0;
- int scale;
- int ioc_cap;
- u8 *mem;
- int error=0;
- int r;
-
- if ((r = mpt_attach(pdev,id)) != 0)
- return r;
-
- ioc = pci_get_drvdata(pdev);
- ioc->DoneCtx = mptfcDoneCtx;
- ioc->TaskCtx = mptfcTaskCtx;
- ioc->InternalCtx = mptfcInternalCtx;
- /* Added sanity check on readiness of the MPT adapter.
- */
- if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
- printk(MYIOC_s_WARN_FMT
- "Skipping because it's not operational!\n",
- ioc->name);
- return -ENODEV;
- }
- if (!ioc->active) {
- printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
- ioc->name);
- return -ENODEV;
- }
- /* Sanity check - ensure at least 1 port is INITIATOR capable
- */
- ioc_cap = 0;
- for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- if (ioc->pfacts[ii].ProtocolFlags &
- MPI_PORTFACTS_PROTOCOL_INITIATOR)
- ioc_cap ++;
- }
- if (!ioc_cap) {
- printk(MYIOC_s_WARN_FMT
- "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
- ioc->name, ioc);
- return -ENODEV;
- }
- sh = scsi_host_alloc(&mptfc_driver_template, sizeof(MPT_SCSI_HOST));
- if (!sh) {
- printk(MYIOC_s_WARN_FMT
- "Unable to register controller with SCSI subsystem\n",
- ioc->name);
- return -1;
- }
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- /* Attach the SCSI Host to the IOC structure
- */
- ioc->sh = sh;
- sh->io_port = 0;
- sh->n_io_port = 0;
- sh->irq = 0;
- /* set 16 byte cdb's */
- sh->max_cmd_len = 16;
- sh->max_id = MPT_MAX_FC_DEVICES<256 ? MPT_MAX_FC_DEVICES : 255;
- sh->max_lun = MPT_LAST_LUN + 1;
- sh->max_channel = 0;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
- /* Required entry.
- */
- sh->unique_id = ioc->id;
- /* Verify that we won't exceed the maximum
- * number of chain buffers
- * We can optimize: ZZ = req_sz/sizeof(SGE)
- * For 32bit SGE's:
- * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
- * + (req_sz - 64)/sizeof(SGE)
- * A slightly different algorithm is required for
- * 64bit SGEs.
- */
- scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
- if (sizeof(dma_addr_t) == sizeof(u64)) {
- numSGE = (scale - 1) *
- (ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
- sizeof(u32));
- } else {
- numSGE = 1 + (scale - 1) *
- (ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
- sizeof(u32));
- }
- if (numSGE < sh->sg_tablesize) {
- /* Reset this value */
- dprintk((MYIOC_s_INFO_FMT
- "Resetting sg_tablesize to %d from %d\n",
- ioc->name, numSGE, sh->sg_tablesize));
- sh->sg_tablesize = numSGE;
- }
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- hd = (MPT_SCSI_HOST *) sh->hostdata;
- hd->ioc = ioc;
- /* SCSI needs scsi_cmnd lookup table!
- * (with size equal to req_depth*PtrSz!)
- */
- sz = ioc->req_depth * sizeof(void *);
- mem = kmalloc(sz, GFP_ATOMIC);
- if (mem == NULL) {
- error = -ENOMEM;
- goto mptfc_probe_failed;
- }
- memset(mem, 0, sz);
- hd->ScsiLookup = (struct scsi_cmnd **) mem;
- dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n",
- ioc->name, hd->ScsiLookup, sz));
- /* Allocate memory for the device structures.
- * A non-Null pointer at an offset
- * indicates a device exists.
- * max_id = 1 + maximum id (hosts.h)
- */
- sz = sh->max_id * sizeof(void *);
- mem = kmalloc(sz, GFP_ATOMIC);
- if (mem == NULL) {
- error = -ENOMEM;
- goto mptfc_probe_failed;
- }
- memset(mem, 0, sz);
- hd->Targets = (VirtDevice **) mem;
- dprintk((KERN_INFO
- " Targets @ %p, sz=%d\n", hd->Targets, sz));
- /* Clear the TM flags
- */
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- hd->resetPending = 0;
- hd->abortSCpnt = NULL;
- /* Clear the pointer used to store
- * single-threaded commands, i.e., those
- * issued during a bus scan, dv and
- * configuration pages.
- */
- hd->cmdPtr = NULL;
- /* Initialize this SCSI Hosts' timers
- * To use, set the timer expires field
- * and add_timer
- */
- init_timer(&hd->timer);
- hd->timer.data = (unsigned long) hd;
- hd->timer.function = mptscsih_timer_expired;
- hd->mpt_pq_filter = mpt_pq_filter;
- ddvprintk((MYIOC_s_INFO_FMT
- "mpt_pq_filter %x\n",
- ioc->name,
- mpt_pq_filter));
- init_waitqueue_head(&hd->scandv_waitq);
- hd->scandv_wait_done = 0;
- hd->last_queue_full = 0;
- error = scsi_add_host (sh, &ioc->pcidev->dev);
- if(error) {
- dprintk((KERN_ERR MYNAM
- "scsi_add_host failed\n"));
- goto mptfc_probe_failed;
- }
- scsi_scan_host(sh);
- return 0;
- mptfc_probe_failed:
- mptscsih_remove(pdev);
- return error;
- }
- static struct pci_driver mptfc_driver = {
- .name = "mptfc",
- .id_table = mptfc_pci_table,
- .probe = mptfc_probe,
- .remove = __devexit_p(mptscsih_remove),
- .shutdown = mptscsih_shutdown,
- #ifdef CONFIG_PM
- .suspend = mptscsih_suspend,
- .resume = mptscsih_resume,
- #endif
- };
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- /**
- * mptfc_init - Register MPT adapter(s) as SCSI host(s) with
- * linux scsi mid-layer.
- *
- * Returns 0 for success, non-zero for failure.
- */
- static int __init
- mptfc_init(void)
- {
- show_mptmod_ver(my_NAME, my_VERSION);
- mptfcDoneCtx = mpt_register(mptscsih_io_done, MPTFC_DRIVER);
- mptfcTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTFC_DRIVER);
- mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER);
- if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) {
- devtprintk((KERN_INFO MYNAM
- ": Registered for IOC event notifications\n"));
- }
- if (mpt_reset_register(mptfcDoneCtx, mptscsih_ioc_reset) == 0) {
- dprintk((KERN_INFO MYNAM
- ": Registered for IOC reset notifications\n"));
- }
- return pci_register_driver(&mptfc_driver);
- }
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
- /**
- * mptfc_exit - Unregisters MPT adapter(s)
- *
- */
- static void __exit
- mptfc_exit(void)
- {
- pci_unregister_driver(&mptfc_driver);
-
- mpt_reset_deregister(mptfcDoneCtx);
- dprintk((KERN_INFO MYNAM
- ": Deregistered for IOC reset notifications\n"));
- mpt_event_deregister(mptfcDoneCtx);
- dprintk((KERN_INFO MYNAM
- ": Deregistered for IOC event notifications\n"));
- mpt_deregister(mptfcInternalCtx);
- mpt_deregister(mptfcTaskCtx);
- mpt_deregister(mptfcDoneCtx);
- }
- module_init(mptfc_init);
- module_exit(mptfc_exit);
|