| 1234567891011121314151617181920212223242526272829303132333435363738394041424344 |
- INTRODUCTION
- The USB Bluetooth driver supports any USB Bluetooth device.
- It currently works well with the Linux USB Bluetooth stack from Axis
- (available at http://developer.axis.com/software/bluetooth/ ) and
- has been rumored to work with other Linux USB Bluetooth stacks.
- CONFIGURATION
- Currently the driver can handle up to 256 different USB Bluetooth
- devices at once.
- If you are not using devfs:
- The major number that the driver uses is 216 so to use the driver,
- create the following nodes:
- mknod /dev/ttyUB0 c 216 0
- mknod /dev/ttyUB1 c 216 1
- mknod /dev/ttyUB2 c 216 2
- mknod /dev/ttyUB3 c 216 3
- .
- .
- .
- mknod /dev/ttyUB254 c 216 254
- mknod /dev/ttyUB255 c 216 255
- If you are using devfs:
- The devices supported by this driver will show up as
- /dev/usb/ttub/{0,1,...}
- When the device is connected and recognized by the driver, the driver
- will print to the system log, which node the device has been bound to.
- CONTACT:
- If anyone has any problems using this driver, please contact me, or
- join the Linux-USB mailing list (information on joining the mailing
- list, as well as a link to its searchable archive is at
- http://www.linux-usb.org/ )
- Greg Kroah-Hartman
- greg@kroah.com
|
