iommu2.c 8.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345
  1. /*
  2. * omap iommu: omap2/3 architecture specific functions
  3. *
  4. * Copyright (C) 2008-2009 Nokia Corporation
  5. *
  6. * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
  7. * Paul Mundt and Toshihiro Kobayashi
  8. *
  9. * This program is free software; you can redistribute it and/or modify
  10. * it under the terms of the GNU General Public License version 2 as
  11. * published by the Free Software Foundation.
  12. */
  13. #include <linux/err.h>
  14. #include <linux/device.h>
  15. #include <linux/jiffies.h>
  16. #include <linux/module.h>
  17. #include <linux/slab.h>
  18. #include <linux/stringify.h>
  19. #include <plat/iommu.h>
  20. /*
  21. * omap2 architecture specific register bit definitions
  22. */
  23. #define IOMMU_ARCH_VERSION 0x00000011
  24. /* SYSCONF */
  25. #define MMU_SYS_IDLE_SHIFT 3
  26. #define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT)
  27. #define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT)
  28. #define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT)
  29. #define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT)
  30. #define MMU_SYS_SOFTRESET (1 << 1)
  31. #define MMU_SYS_AUTOIDLE 1
  32. /* SYSSTATUS */
  33. #define MMU_SYS_RESETDONE 1
  34. /* IRQSTATUS & IRQENABLE */
  35. #define MMU_IRQ_MULTIHITFAULT (1 << 4)
  36. #define MMU_IRQ_TABLEWALKFAULT (1 << 3)
  37. #define MMU_IRQ_EMUMISS (1 << 2)
  38. #define MMU_IRQ_TRANSLATIONFAULT (1 << 1)
  39. #define MMU_IRQ_TLBMISS (1 << 0)
  40. #define __MMU_IRQ_FAULT \
  41. (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
  42. #define MMU_IRQ_MASK \
  43. (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS)
  44. #define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT)
  45. #define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS)
  46. /* MMU_CNTL */
  47. #define MMU_CNTL_SHIFT 1
  48. #define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT)
  49. #define MMU_CNTL_EML_TLB (1 << 3)
  50. #define MMU_CNTL_TWL_EN (1 << 2)
  51. #define MMU_CNTL_MMU_EN (1 << 1)
  52. #define get_cam_va_mask(pgsz) \
  53. (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \
  54. ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \
  55. ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
  56. ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
  57. static void __iommu_set_twl(struct iommu *obj, bool on)
  58. {
  59. u32 l = iommu_read_reg(obj, MMU_CNTL);
  60. if (on)
  61. iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE);
  62. else
  63. iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE);
  64. l &= ~MMU_CNTL_MASK;
  65. if (on)
  66. l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
  67. else
  68. l |= (MMU_CNTL_MMU_EN);
  69. iommu_write_reg(obj, l, MMU_CNTL);
  70. }
  71. static int omap2_iommu_enable(struct iommu *obj)
  72. {
  73. u32 l, pa;
  74. unsigned long timeout;
  75. if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K))
  76. return -EINVAL;
  77. pa = virt_to_phys(obj->iopgd);
  78. if (!IS_ALIGNED(pa, SZ_16K))
  79. return -EINVAL;
  80. iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
  81. timeout = jiffies + msecs_to_jiffies(20);
  82. do {
  83. l = iommu_read_reg(obj, MMU_SYSSTATUS);
  84. if (l & MMU_SYS_RESETDONE)
  85. break;
  86. } while (!time_after(jiffies, timeout));
  87. if (!(l & MMU_SYS_RESETDONE)) {
  88. dev_err(obj->dev, "can't take mmu out of reset\n");
  89. return -ENODEV;
  90. }
  91. l = iommu_read_reg(obj, MMU_REVISION);
  92. dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
  93. (l >> 4) & 0xf, l & 0xf);
  94. l = iommu_read_reg(obj, MMU_SYSCONFIG);
  95. l &= ~MMU_SYS_IDLE_MASK;
  96. l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
  97. iommu_write_reg(obj, l, MMU_SYSCONFIG);
  98. iommu_write_reg(obj, pa, MMU_TTB);
  99. __iommu_set_twl(obj, true);
  100. return 0;
  101. }
  102. static void omap2_iommu_disable(struct iommu *obj)
  103. {
  104. u32 l = iommu_read_reg(obj, MMU_CNTL);
  105. l &= ~MMU_CNTL_MASK;
  106. iommu_write_reg(obj, l, MMU_CNTL);
  107. iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
  108. dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
  109. }
  110. static void omap2_iommu_set_twl(struct iommu *obj, bool on)
  111. {
  112. __iommu_set_twl(obj, false);
  113. }
  114. static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
  115. {
  116. u32 stat, da;
  117. stat = iommu_read_reg(obj, MMU_IRQSTATUS);
  118. stat &= MMU_IRQ_MASK;
  119. if (!stat)
  120. return 0;
  121. da = iommu_read_reg(obj, MMU_FAULT_AD);
  122. *ra = da;
  123. iommu_write_reg(obj, stat, MMU_IRQSTATUS);
  124. return stat;
  125. }
  126. static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
  127. {
  128. cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
  129. cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
  130. }
  131. static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
  132. {
  133. iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
  134. iommu_write_reg(obj, cr->ram, MMU_RAM);
  135. }
  136. static u32 omap2_cr_to_virt(struct cr_regs *cr)
  137. {
  138. u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
  139. u32 mask = get_cam_va_mask(cr->cam & page_size);
  140. return cr->cam & mask;
  141. }
  142. static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
  143. {
  144. struct cr_regs *cr;
  145. if (e->da & ~(get_cam_va_mask(e->pgsz))) {
  146. dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
  147. e->da);
  148. return ERR_PTR(-EINVAL);
  149. }
  150. cr = kmalloc(sizeof(*cr), GFP_KERNEL);
  151. if (!cr)
  152. return ERR_PTR(-ENOMEM);
  153. cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid;
  154. cr->ram = e->pa | e->endian | e->elsz | e->mixed;
  155. return cr;
  156. }
  157. static inline int omap2_cr_valid(struct cr_regs *cr)
  158. {
  159. return cr->cam & MMU_CAM_V;
  160. }
  161. static u32 omap2_get_pte_attr(struct iotlb_entry *e)
  162. {
  163. u32 attr;
  164. attr = e->mixed << 5;
  165. attr |= e->endian;
  166. attr |= e->elsz >> 3;
  167. attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
  168. return attr;
  169. }
  170. static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
  171. {
  172. char *p = buf;
  173. /* FIXME: Need more detail analysis of cam/ram */
  174. p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram,
  175. (cr->cam & MMU_CAM_P) ? 1 : 0);
  176. return p - buf;
  177. }
  178. #define pr_reg(name) \
  179. do { \
  180. ssize_t bytes; \
  181. const char *str = "%20s: %08x\n"; \
  182. const int maxcol = 32; \
  183. bytes = snprintf(p, maxcol, str, __stringify(name), \
  184. iommu_read_reg(obj, MMU_##name)); \
  185. p += bytes; \
  186. len -= bytes; \
  187. if (len < maxcol) \
  188. goto out; \
  189. } while (0)
  190. static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
  191. {
  192. char *p = buf;
  193. pr_reg(REVISION);
  194. pr_reg(SYSCONFIG);
  195. pr_reg(SYSSTATUS);
  196. pr_reg(IRQSTATUS);
  197. pr_reg(IRQENABLE);
  198. pr_reg(WALKING_ST);
  199. pr_reg(CNTL);
  200. pr_reg(FAULT_AD);
  201. pr_reg(TTB);
  202. pr_reg(LOCK);
  203. pr_reg(LD_TLB);
  204. pr_reg(CAM);
  205. pr_reg(RAM);
  206. pr_reg(GFLUSH);
  207. pr_reg(FLUSH_ENTRY);
  208. pr_reg(READ_CAM);
  209. pr_reg(READ_RAM);
  210. pr_reg(EMU_FAULT_AD);
  211. out:
  212. return p - buf;
  213. }
  214. static void omap2_iommu_save_ctx(struct iommu *obj)
  215. {
  216. int i;
  217. u32 *p = obj->ctx;
  218. for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
  219. p[i] = iommu_read_reg(obj, i * sizeof(u32));
  220. dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
  221. }
  222. BUG_ON(p[0] != IOMMU_ARCH_VERSION);
  223. }
  224. static void omap2_iommu_restore_ctx(struct iommu *obj)
  225. {
  226. int i;
  227. u32 *p = obj->ctx;
  228. for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
  229. iommu_write_reg(obj, p[i], i * sizeof(u32));
  230. dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
  231. }
  232. BUG_ON(p[0] != IOMMU_ARCH_VERSION);
  233. }
  234. static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
  235. {
  236. e->da = cr->cam & MMU_CAM_VATAG_MASK;
  237. e->pa = cr->ram & MMU_RAM_PADDR_MASK;
  238. e->valid = cr->cam & MMU_CAM_V;
  239. e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK;
  240. e->endian = cr->ram & MMU_RAM_ENDIAN_MASK;
  241. e->elsz = cr->ram & MMU_RAM_ELSZ_MASK;
  242. e->mixed = cr->ram & MMU_RAM_MIXED;
  243. }
  244. static const struct iommu_functions omap2_iommu_ops = {
  245. .version = IOMMU_ARCH_VERSION,
  246. .enable = omap2_iommu_enable,
  247. .disable = omap2_iommu_disable,
  248. .set_twl = omap2_iommu_set_twl,
  249. .fault_isr = omap2_iommu_fault_isr,
  250. .tlb_read_cr = omap2_tlb_read_cr,
  251. .tlb_load_cr = omap2_tlb_load_cr,
  252. .cr_to_e = omap2_cr_to_e,
  253. .cr_to_virt = omap2_cr_to_virt,
  254. .alloc_cr = omap2_alloc_cr,
  255. .cr_valid = omap2_cr_valid,
  256. .dump_cr = omap2_dump_cr,
  257. .get_pte_attr = omap2_get_pte_attr,
  258. .save_ctx = omap2_iommu_save_ctx,
  259. .restore_ctx = omap2_iommu_restore_ctx,
  260. .dump_ctx = omap2_iommu_dump_ctx,
  261. };
  262. static int __init omap2_iommu_init(void)
  263. {
  264. return install_iommu_arch(&omap2_iommu_ops);
  265. }
  266. module_init(omap2_iommu_init);
  267. static void __exit omap2_iommu_exit(void)
  268. {
  269. uninstall_iommu_arch(&omap2_iommu_ops);
  270. }
  271. module_exit(omap2_iommu_exit);
  272. MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
  273. MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
  274. MODULE_LICENSE("GPL v2");