iwl-core.c 41 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474
  1. /******************************************************************************
  2. *
  3. * GPL LICENSE SUMMARY
  4. *
  5. * Copyright(c) 2008 Intel Corporation. All rights reserved.
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of version 2 of the GNU General Public License as
  9. * published by the Free Software Foundation.
  10. *
  11. * This program is distributed in the hope that it will be useful, but
  12. * WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  14. * General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  19. * USA
  20. *
  21. * The full GNU General Public License is included in this distribution
  22. * in the file called LICENSE.GPL.
  23. *
  24. * Contact Information:
  25. * Tomas Winkler <tomas.winkler@intel.com>
  26. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27. *****************************************************************************/
  28. #include <linux/kernel.h>
  29. #include <linux/module.h>
  30. #include <net/mac80211.h>
  31. struct iwl_priv; /* FIXME: remove */
  32. #include "iwl-debug.h"
  33. #include "iwl-eeprom.h"
  34. #include "iwl-dev.h" /* FIXME: remove */
  35. #include "iwl-core.h"
  36. #include "iwl-io.h"
  37. #include "iwl-rfkill.h"
  38. #include "iwl-power.h"
  39. MODULE_DESCRIPTION("iwl core");
  40. MODULE_VERSION(IWLWIFI_VERSION);
  41. MODULE_AUTHOR(DRV_COPYRIGHT);
  42. MODULE_LICENSE("GPL");
  43. #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
  44. [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
  45. IWL_RATE_SISO_##s##M_PLCP, \
  46. IWL_RATE_MIMO2_##s##M_PLCP,\
  47. IWL_RATE_MIMO3_##s##M_PLCP,\
  48. IWL_RATE_##r##M_IEEE, \
  49. IWL_RATE_##ip##M_INDEX, \
  50. IWL_RATE_##in##M_INDEX, \
  51. IWL_RATE_##rp##M_INDEX, \
  52. IWL_RATE_##rn##M_INDEX, \
  53. IWL_RATE_##pp##M_INDEX, \
  54. IWL_RATE_##np##M_INDEX }
  55. /*
  56. * Parameter order:
  57. * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
  58. *
  59. * If there isn't a valid next or previous rate then INV is used which
  60. * maps to IWL_RATE_INVALID
  61. *
  62. */
  63. const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
  64. IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
  65. IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
  66. IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
  67. IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
  68. IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
  69. IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
  70. IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
  71. IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
  72. IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
  73. IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
  74. IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
  75. IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  76. IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
  77. /* FIXME:RS: ^^ should be INV (legacy) */
  78. };
  79. EXPORT_SYMBOL(iwl_rates);
  80. /**
  81. * translate ucode response to mac80211 tx status control values
  82. */
  83. void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
  84. struct ieee80211_tx_info *control)
  85. {
  86. int rate_index;
  87. control->antenna_sel_tx =
  88. ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
  89. if (rate_n_flags & RATE_MCS_HT_MSK)
  90. control->flags |= IEEE80211_TX_CTL_OFDM_HT;
  91. if (rate_n_flags & RATE_MCS_GF_MSK)
  92. control->flags |= IEEE80211_TX_CTL_GREEN_FIELD;
  93. if (rate_n_flags & RATE_MCS_FAT_MSK)
  94. control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH;
  95. if (rate_n_flags & RATE_MCS_DUP_MSK)
  96. control->flags |= IEEE80211_TX_CTL_DUP_DATA;
  97. if (rate_n_flags & RATE_MCS_SGI_MSK)
  98. control->flags |= IEEE80211_TX_CTL_SHORT_GI;
  99. rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
  100. if (control->band == IEEE80211_BAND_5GHZ)
  101. rate_index -= IWL_FIRST_OFDM_RATE;
  102. control->tx_rate_idx = rate_index;
  103. }
  104. EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
  105. int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
  106. {
  107. int idx = 0;
  108. /* HT rate format */
  109. if (rate_n_flags & RATE_MCS_HT_MSK) {
  110. idx = (rate_n_flags & 0xff);
  111. if (idx >= IWL_RATE_MIMO2_6M_PLCP)
  112. idx = idx - IWL_RATE_MIMO2_6M_PLCP;
  113. idx += IWL_FIRST_OFDM_RATE;
  114. /* skip 9M not supported in ht*/
  115. if (idx >= IWL_RATE_9M_INDEX)
  116. idx += 1;
  117. if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
  118. return idx;
  119. /* legacy rate format, search for match in table */
  120. } else {
  121. for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
  122. if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
  123. return idx;
  124. }
  125. return -1;
  126. }
  127. EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
  128. const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
  129. EXPORT_SYMBOL(iwl_bcast_addr);
  130. /* This function both allocates and initializes hw and priv. */
  131. struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
  132. struct ieee80211_ops *hw_ops)
  133. {
  134. struct iwl_priv *priv;
  135. /* mac80211 allocates memory for this device instance, including
  136. * space for this driver's private structure */
  137. struct ieee80211_hw *hw =
  138. ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
  139. if (hw == NULL) {
  140. IWL_ERROR("Can not allocate network device\n");
  141. goto out;
  142. }
  143. priv = hw->priv;
  144. priv->hw = hw;
  145. out:
  146. return hw;
  147. }
  148. EXPORT_SYMBOL(iwl_alloc_all);
  149. void iwl_hw_detect(struct iwl_priv *priv)
  150. {
  151. priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
  152. priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
  153. pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
  154. }
  155. EXPORT_SYMBOL(iwl_hw_detect);
  156. /* Tell nic where to find the "keep warm" buffer */
  157. int iwl_kw_init(struct iwl_priv *priv)
  158. {
  159. unsigned long flags;
  160. int ret;
  161. spin_lock_irqsave(&priv->lock, flags);
  162. ret = iwl_grab_nic_access(priv);
  163. if (ret)
  164. goto out;
  165. iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG,
  166. priv->kw.dma_addr >> 4);
  167. iwl_release_nic_access(priv);
  168. out:
  169. spin_unlock_irqrestore(&priv->lock, flags);
  170. return ret;
  171. }
  172. int iwl_kw_alloc(struct iwl_priv *priv)
  173. {
  174. struct pci_dev *dev = priv->pci_dev;
  175. struct iwl_kw *kw = &priv->kw;
  176. kw->size = IWL_KW_SIZE;
  177. kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr);
  178. if (!kw->v_addr)
  179. return -ENOMEM;
  180. return 0;
  181. }
  182. /**
  183. * iwl_kw_free - Free the "keep warm" buffer
  184. */
  185. void iwl_kw_free(struct iwl_priv *priv)
  186. {
  187. struct pci_dev *dev = priv->pci_dev;
  188. struct iwl_kw *kw = &priv->kw;
  189. if (kw->v_addr) {
  190. pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr);
  191. memset(kw, 0, sizeof(*kw));
  192. }
  193. }
  194. int iwl_hw_nic_init(struct iwl_priv *priv)
  195. {
  196. unsigned long flags;
  197. struct iwl_rx_queue *rxq = &priv->rxq;
  198. int ret;
  199. /* nic_init */
  200. spin_lock_irqsave(&priv->lock, flags);
  201. priv->cfg->ops->lib->apm_ops.init(priv);
  202. iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
  203. spin_unlock_irqrestore(&priv->lock, flags);
  204. ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
  205. priv->cfg->ops->lib->apm_ops.config(priv);
  206. /* Allocate the RX queue, or reset if it is already allocated */
  207. if (!rxq->bd) {
  208. ret = iwl_rx_queue_alloc(priv);
  209. if (ret) {
  210. IWL_ERROR("Unable to initialize Rx queue\n");
  211. return -ENOMEM;
  212. }
  213. } else
  214. iwl_rx_queue_reset(priv, rxq);
  215. iwl_rx_replenish(priv);
  216. iwl_rx_init(priv, rxq);
  217. spin_lock_irqsave(&priv->lock, flags);
  218. rxq->need_update = 1;
  219. iwl_rx_queue_update_write_ptr(priv, rxq);
  220. spin_unlock_irqrestore(&priv->lock, flags);
  221. /* Allocate and init all Tx and Command queues */
  222. ret = iwl_txq_ctx_reset(priv);
  223. if (ret)
  224. return ret;
  225. set_bit(STATUS_INIT, &priv->status);
  226. return 0;
  227. }
  228. EXPORT_SYMBOL(iwl_hw_nic_init);
  229. /**
  230. * iwl_clear_stations_table - Clear the driver's station table
  231. *
  232. * NOTE: This does not clear or otherwise alter the device's station table.
  233. */
  234. void iwl_clear_stations_table(struct iwl_priv *priv)
  235. {
  236. unsigned long flags;
  237. spin_lock_irqsave(&priv->sta_lock, flags);
  238. if (iwl_is_alive(priv) &&
  239. !test_bit(STATUS_EXIT_PENDING, &priv->status) &&
  240. iwl_send_cmd_pdu_async(priv, REPLY_REMOVE_ALL_STA, 0, NULL, NULL))
  241. IWL_ERROR("Couldn't clear the station table\n");
  242. priv->num_stations = 0;
  243. memset(priv->stations, 0, sizeof(priv->stations));
  244. /* clean ucode key table bit map */
  245. priv->ucode_key_table = 0;
  246. spin_unlock_irqrestore(&priv->sta_lock, flags);
  247. }
  248. EXPORT_SYMBOL(iwl_clear_stations_table);
  249. void iwl_reset_qos(struct iwl_priv *priv)
  250. {
  251. u16 cw_min = 15;
  252. u16 cw_max = 1023;
  253. u8 aifs = 2;
  254. u8 is_legacy = 0;
  255. unsigned long flags;
  256. int i;
  257. spin_lock_irqsave(&priv->lock, flags);
  258. priv->qos_data.qos_active = 0;
  259. if (priv->iw_mode == NL80211_IFTYPE_ADHOC) {
  260. if (priv->qos_data.qos_enable)
  261. priv->qos_data.qos_active = 1;
  262. if (!(priv->active_rate & 0xfff0)) {
  263. cw_min = 31;
  264. is_legacy = 1;
  265. }
  266. } else if (priv->iw_mode == NL80211_IFTYPE_AP) {
  267. if (priv->qos_data.qos_enable)
  268. priv->qos_data.qos_active = 1;
  269. } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
  270. cw_min = 31;
  271. is_legacy = 1;
  272. }
  273. if (priv->qos_data.qos_active)
  274. aifs = 3;
  275. priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
  276. priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
  277. priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
  278. priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
  279. priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
  280. if (priv->qos_data.qos_active) {
  281. i = 1;
  282. priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
  283. priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
  284. priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
  285. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  286. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  287. i = 2;
  288. priv->qos_data.def_qos_parm.ac[i].cw_min =
  289. cpu_to_le16((cw_min + 1) / 2 - 1);
  290. priv->qos_data.def_qos_parm.ac[i].cw_max =
  291. cpu_to_le16(cw_max);
  292. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  293. if (is_legacy)
  294. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  295. cpu_to_le16(6016);
  296. else
  297. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  298. cpu_to_le16(3008);
  299. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  300. i = 3;
  301. priv->qos_data.def_qos_parm.ac[i].cw_min =
  302. cpu_to_le16((cw_min + 1) / 4 - 1);
  303. priv->qos_data.def_qos_parm.ac[i].cw_max =
  304. cpu_to_le16((cw_max + 1) / 2 - 1);
  305. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  306. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  307. if (is_legacy)
  308. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  309. cpu_to_le16(3264);
  310. else
  311. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  312. cpu_to_le16(1504);
  313. } else {
  314. for (i = 1; i < 4; i++) {
  315. priv->qos_data.def_qos_parm.ac[i].cw_min =
  316. cpu_to_le16(cw_min);
  317. priv->qos_data.def_qos_parm.ac[i].cw_max =
  318. cpu_to_le16(cw_max);
  319. priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
  320. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  321. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  322. }
  323. }
  324. IWL_DEBUG_QOS("set QoS to default \n");
  325. spin_unlock_irqrestore(&priv->lock, flags);
  326. }
  327. EXPORT_SYMBOL(iwl_reset_qos);
  328. #define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */
  329. #define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */
  330. static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
  331. struct ieee80211_ht_info *ht_info,
  332. enum ieee80211_band band)
  333. {
  334. u16 max_bit_rate = 0;
  335. u8 rx_chains_num = priv->hw_params.rx_chains_num;
  336. u8 tx_chains_num = priv->hw_params.tx_chains_num;
  337. ht_info->cap = 0;
  338. memset(ht_info->supp_mcs_set, 0, 16);
  339. ht_info->ht_supported = 1;
  340. ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
  341. ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
  342. ht_info->cap |= (u16)(IEEE80211_HT_CAP_SM_PS &
  343. (WLAN_HT_CAP_SM_PS_DISABLED << 2));
  344. max_bit_rate = MAX_BIT_RATE_20_MHZ;
  345. if (priv->hw_params.fat_channel & BIT(band)) {
  346. ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
  347. ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
  348. ht_info->supp_mcs_set[4] = 0x01;
  349. max_bit_rate = MAX_BIT_RATE_40_MHZ;
  350. }
  351. if (priv->cfg->mod_params->amsdu_size_8K)
  352. ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
  353. ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
  354. ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
  355. ht_info->supp_mcs_set[0] = 0xFF;
  356. if (rx_chains_num >= 2)
  357. ht_info->supp_mcs_set[1] = 0xFF;
  358. if (rx_chains_num >= 3)
  359. ht_info->supp_mcs_set[2] = 0xFF;
  360. /* Highest supported Rx data rate */
  361. max_bit_rate *= rx_chains_num;
  362. ht_info->supp_mcs_set[10] = (u8)(max_bit_rate & 0x00FF);
  363. ht_info->supp_mcs_set[11] = (u8)((max_bit_rate & 0xFF00) >> 8);
  364. /* Tx MCS capabilities */
  365. ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
  366. if (tx_chains_num != rx_chains_num) {
  367. ht_info->supp_mcs_set[12] |= IEEE80211_HT_CAP_MCS_TX_RX_DIFF;
  368. ht_info->supp_mcs_set[12] |= ((tx_chains_num - 1) << 2);
  369. }
  370. }
  371. static void iwlcore_init_hw_rates(struct iwl_priv *priv,
  372. struct ieee80211_rate *rates)
  373. {
  374. int i;
  375. for (i = 0; i < IWL_RATE_COUNT; i++) {
  376. rates[i].bitrate = iwl_rates[i].ieee * 5;
  377. rates[i].hw_value = i; /* Rate scaling will work on indexes */
  378. rates[i].hw_value_short = i;
  379. rates[i].flags = 0;
  380. if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
  381. /*
  382. * If CCK != 1M then set short preamble rate flag.
  383. */
  384. rates[i].flags |=
  385. (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
  386. 0 : IEEE80211_RATE_SHORT_PREAMBLE;
  387. }
  388. }
  389. }
  390. /**
  391. * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
  392. */
  393. static int iwlcore_init_geos(struct iwl_priv *priv)
  394. {
  395. struct iwl_channel_info *ch;
  396. struct ieee80211_supported_band *sband;
  397. struct ieee80211_channel *channels;
  398. struct ieee80211_channel *geo_ch;
  399. struct ieee80211_rate *rates;
  400. int i = 0;
  401. if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
  402. priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
  403. IWL_DEBUG_INFO("Geography modes already initialized.\n");
  404. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  405. return 0;
  406. }
  407. channels = kzalloc(sizeof(struct ieee80211_channel) *
  408. priv->channel_count, GFP_KERNEL);
  409. if (!channels)
  410. return -ENOMEM;
  411. rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
  412. GFP_KERNEL);
  413. if (!rates) {
  414. kfree(channels);
  415. return -ENOMEM;
  416. }
  417. /* 5.2GHz channels start after the 2.4GHz channels */
  418. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  419. sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
  420. /* just OFDM */
  421. sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
  422. sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
  423. if (priv->cfg->sku & IWL_SKU_N)
  424. iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
  425. IEEE80211_BAND_5GHZ);
  426. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  427. sband->channels = channels;
  428. /* OFDM & CCK */
  429. sband->bitrates = rates;
  430. sband->n_bitrates = IWL_RATE_COUNT;
  431. if (priv->cfg->sku & IWL_SKU_N)
  432. iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
  433. IEEE80211_BAND_2GHZ);
  434. priv->ieee_channels = channels;
  435. priv->ieee_rates = rates;
  436. iwlcore_init_hw_rates(priv, rates);
  437. for (i = 0; i < priv->channel_count; i++) {
  438. ch = &priv->channel_info[i];
  439. /* FIXME: might be removed if scan is OK */
  440. if (!is_channel_valid(ch))
  441. continue;
  442. if (is_channel_a_band(ch))
  443. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  444. else
  445. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  446. geo_ch = &sband->channels[sband->n_channels++];
  447. geo_ch->center_freq =
  448. ieee80211_channel_to_frequency(ch->channel);
  449. geo_ch->max_power = ch->max_power_avg;
  450. geo_ch->max_antenna_gain = 0xff;
  451. geo_ch->hw_value = ch->channel;
  452. if (is_channel_valid(ch)) {
  453. if (!(ch->flags & EEPROM_CHANNEL_IBSS))
  454. geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
  455. if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
  456. geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
  457. if (ch->flags & EEPROM_CHANNEL_RADAR)
  458. geo_ch->flags |= IEEE80211_CHAN_RADAR;
  459. geo_ch->flags |= ch->fat_extension_channel;
  460. if (ch->max_power_avg > priv->tx_power_channel_lmt)
  461. priv->tx_power_channel_lmt = ch->max_power_avg;
  462. } else {
  463. geo_ch->flags |= IEEE80211_CHAN_DISABLED;
  464. }
  465. /* Save flags for reg domain usage */
  466. geo_ch->orig_flags = geo_ch->flags;
  467. IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
  468. ch->channel, geo_ch->center_freq,
  469. is_channel_a_band(ch) ? "5.2" : "2.4",
  470. geo_ch->flags & IEEE80211_CHAN_DISABLED ?
  471. "restricted" : "valid",
  472. geo_ch->flags);
  473. }
  474. if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
  475. priv->cfg->sku & IWL_SKU_A) {
  476. printk(KERN_INFO DRV_NAME
  477. ": Incorrectly detected BG card as ABG. Please send "
  478. "your PCI ID 0x%04X:0x%04X to maintainer.\n",
  479. priv->pci_dev->device, priv->pci_dev->subsystem_device);
  480. priv->cfg->sku &= ~IWL_SKU_A;
  481. }
  482. printk(KERN_INFO DRV_NAME
  483. ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
  484. priv->bands[IEEE80211_BAND_2GHZ].n_channels,
  485. priv->bands[IEEE80211_BAND_5GHZ].n_channels);
  486. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  487. return 0;
  488. }
  489. /*
  490. * iwlcore_free_geos - undo allocations in iwlcore_init_geos
  491. */
  492. static void iwlcore_free_geos(struct iwl_priv *priv)
  493. {
  494. kfree(priv->ieee_channels);
  495. kfree(priv->ieee_rates);
  496. clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
  497. }
  498. static bool is_single_rx_stream(struct iwl_priv *priv)
  499. {
  500. return !priv->current_ht_config.is_ht ||
  501. ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
  502. (priv->current_ht_config.supp_mcs_set[2] == 0));
  503. }
  504. static u8 iwl_is_channel_extension(struct iwl_priv *priv,
  505. enum ieee80211_band band,
  506. u16 channel, u8 extension_chan_offset)
  507. {
  508. const struct iwl_channel_info *ch_info;
  509. ch_info = iwl_get_channel_info(priv, band, channel);
  510. if (!is_channel_valid(ch_info))
  511. return 0;
  512. if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE)
  513. return !(ch_info->fat_extension_channel &
  514. IEEE80211_CHAN_NO_FAT_ABOVE);
  515. else if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW)
  516. return !(ch_info->fat_extension_channel &
  517. IEEE80211_CHAN_NO_FAT_BELOW);
  518. return 0;
  519. }
  520. u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
  521. struct ieee80211_ht_info *sta_ht_inf)
  522. {
  523. struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
  524. if ((!iwl_ht_conf->is_ht) ||
  525. (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
  526. (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE))
  527. return 0;
  528. if (sta_ht_inf) {
  529. if ((!sta_ht_inf->ht_supported) ||
  530. (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
  531. return 0;
  532. }
  533. return iwl_is_channel_extension(priv, priv->band,
  534. iwl_ht_conf->control_channel,
  535. iwl_ht_conf->extension_chan_offset);
  536. }
  537. EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
  538. void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
  539. {
  540. struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
  541. u32 val;
  542. if (!ht_info->is_ht) {
  543. rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
  544. RXON_FLG_CHANNEL_MODE_PURE_40_MSK |
  545. RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
  546. RXON_FLG_FAT_PROT_MSK |
  547. RXON_FLG_HT_PROT_MSK);
  548. return;
  549. }
  550. /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */
  551. if (iwl_is_fat_tx_allowed(priv, NULL))
  552. rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  553. else
  554. rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
  555. RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
  556. if (le16_to_cpu(rxon->channel) != ht_info->control_channel) {
  557. IWL_DEBUG_ASSOC("control diff than current %d %d\n",
  558. le16_to_cpu(rxon->channel),
  559. ht_info->control_channel);
  560. return;
  561. }
  562. /* Note: control channel is opposite of extension channel */
  563. switch (ht_info->extension_chan_offset) {
  564. case IEEE80211_HT_IE_CHA_SEC_ABOVE:
  565. rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
  566. break;
  567. case IEEE80211_HT_IE_CHA_SEC_BELOW:
  568. rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
  569. break;
  570. case IEEE80211_HT_IE_CHA_SEC_NONE:
  571. default:
  572. rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  573. break;
  574. }
  575. val = ht_info->ht_protection;
  576. rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
  577. iwl_set_rxon_chain(priv);
  578. IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
  579. "rxon flags 0x%X operation mode :0x%X "
  580. "extension channel offset 0x%x "
  581. "control chan %d\n",
  582. ht_info->supp_mcs_set[0],
  583. ht_info->supp_mcs_set[1],
  584. ht_info->supp_mcs_set[2],
  585. le32_to_cpu(rxon->flags), ht_info->ht_protection,
  586. ht_info->extension_chan_offset,
  587. ht_info->control_channel);
  588. return;
  589. }
  590. EXPORT_SYMBOL(iwl_set_rxon_ht);
  591. #define IWL_NUM_RX_CHAINS_MULTIPLE 3
  592. #define IWL_NUM_RX_CHAINS_SINGLE 2
  593. #define IWL_NUM_IDLE_CHAINS_DUAL 2
  594. #define IWL_NUM_IDLE_CHAINS_SINGLE 1
  595. /* Determine how many receiver/antenna chains to use.
  596. * More provides better reception via diversity. Fewer saves power.
  597. * MIMO (dual stream) requires at least 2, but works better with 3.
  598. * This does not determine *which* chains to use, just how many.
  599. */
  600. static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
  601. {
  602. bool is_single = is_single_rx_stream(priv);
  603. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  604. /* # of Rx chains to use when expecting MIMO. */
  605. if (is_single || (!is_cam && (priv->current_ht_config.sm_ps ==
  606. WLAN_HT_CAP_SM_PS_STATIC)))
  607. return IWL_NUM_RX_CHAINS_SINGLE;
  608. else
  609. return IWL_NUM_RX_CHAINS_MULTIPLE;
  610. }
  611. static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
  612. {
  613. int idle_cnt;
  614. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  615. /* # Rx chains when idling and maybe trying to save power */
  616. switch (priv->current_ht_config.sm_ps) {
  617. case WLAN_HT_CAP_SM_PS_STATIC:
  618. case WLAN_HT_CAP_SM_PS_DYNAMIC:
  619. idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
  620. IWL_NUM_IDLE_CHAINS_SINGLE;
  621. break;
  622. case WLAN_HT_CAP_SM_PS_DISABLED:
  623. idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
  624. break;
  625. case WLAN_HT_CAP_SM_PS_INVALID:
  626. default:
  627. IWL_ERROR("invalide mimo ps mode %d\n",
  628. priv->current_ht_config.sm_ps);
  629. WARN_ON(1);
  630. idle_cnt = -1;
  631. break;
  632. }
  633. return idle_cnt;
  634. }
  635. /* up to 4 chains */
  636. static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
  637. {
  638. u8 res;
  639. res = (chain_bitmap & BIT(0)) >> 0;
  640. res += (chain_bitmap & BIT(1)) >> 1;
  641. res += (chain_bitmap & BIT(2)) >> 2;
  642. res += (chain_bitmap & BIT(4)) >> 4;
  643. return res;
  644. }
  645. /**
  646. * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
  647. *
  648. * Selects how many and which Rx receivers/antennas/chains to use.
  649. * This should not be used for scan command ... it puts data in wrong place.
  650. */
  651. void iwl_set_rxon_chain(struct iwl_priv *priv)
  652. {
  653. bool is_single = is_single_rx_stream(priv);
  654. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  655. u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
  656. u32 active_chains;
  657. u16 rx_chain;
  658. /* Tell uCode which antennas are actually connected.
  659. * Before first association, we assume all antennas are connected.
  660. * Just after first association, iwl_chain_noise_calibration()
  661. * checks which antennas actually *are* connected. */
  662. if (priv->chain_noise_data.active_chains)
  663. active_chains = priv->chain_noise_data.active_chains;
  664. else
  665. active_chains = priv->hw_params.valid_rx_ant;
  666. rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
  667. /* How many receivers should we use? */
  668. active_rx_cnt = iwl_get_active_rx_chain_count(priv);
  669. idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
  670. /* correct rx chain count according hw settings
  671. * and chain noise calibration
  672. */
  673. valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
  674. if (valid_rx_cnt < active_rx_cnt)
  675. active_rx_cnt = valid_rx_cnt;
  676. if (valid_rx_cnt < idle_rx_cnt)
  677. idle_rx_cnt = valid_rx_cnt;
  678. rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
  679. rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
  680. priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
  681. if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
  682. priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
  683. else
  684. priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
  685. IWL_DEBUG_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
  686. priv->staging_rxon.rx_chain,
  687. active_rx_cnt, idle_rx_cnt);
  688. WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
  689. active_rx_cnt < idle_rx_cnt);
  690. }
  691. EXPORT_SYMBOL(iwl_set_rxon_chain);
  692. /**
  693. * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  694. * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
  695. * @channel: Any channel valid for the requested phymode
  696. * In addition to setting the staging RXON, priv->phymode is also set.
  697. *
  698. * NOTE: Does not commit to the hardware; it sets appropriate bit fields
  699. * in the staging RXON flag structure based on the phymode
  700. */
  701. int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch)
  702. {
  703. enum ieee80211_band band = ch->band;
  704. u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
  705. if (!iwl_get_channel_info(priv, band, channel)) {
  706. IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
  707. channel, band);
  708. return -EINVAL;
  709. }
  710. if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
  711. (priv->band == band))
  712. return 0;
  713. priv->staging_rxon.channel = cpu_to_le16(channel);
  714. if (band == IEEE80211_BAND_5GHZ)
  715. priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
  716. else
  717. priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
  718. priv->band = band;
  719. IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
  720. return 0;
  721. }
  722. EXPORT_SYMBOL(iwl_set_rxon_channel);
  723. int iwl_setup_mac(struct iwl_priv *priv)
  724. {
  725. int ret;
  726. struct ieee80211_hw *hw = priv->hw;
  727. hw->rate_control_algorithm = "iwl-agn-rs";
  728. /* Tell mac80211 our characteristics */
  729. hw->flags = IEEE80211_HW_SIGNAL_DBM |
  730. IEEE80211_HW_NOISE_DBM;
  731. hw->wiphy->interface_modes =
  732. BIT(NL80211_IFTYPE_AP) |
  733. BIT(NL80211_IFTYPE_STATION) |
  734. BIT(NL80211_IFTYPE_ADHOC);
  735. /* Default value; 4 EDCA QOS priorities */
  736. hw->queues = 4;
  737. /* queues to support 11n aggregation */
  738. if (priv->cfg->sku & IWL_SKU_N)
  739. hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
  740. hw->conf.beacon_int = 100;
  741. hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
  742. if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
  743. priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
  744. &priv->bands[IEEE80211_BAND_2GHZ];
  745. if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
  746. priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
  747. &priv->bands[IEEE80211_BAND_5GHZ];
  748. ret = ieee80211_register_hw(priv->hw);
  749. if (ret) {
  750. IWL_ERROR("Failed to register hw (error %d)\n", ret);
  751. return ret;
  752. }
  753. priv->mac80211_registered = 1;
  754. return 0;
  755. }
  756. EXPORT_SYMBOL(iwl_setup_mac);
  757. int iwl_set_hw_params(struct iwl_priv *priv)
  758. {
  759. priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
  760. priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
  761. priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
  762. if (priv->cfg->mod_params->amsdu_size_8K)
  763. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
  764. else
  765. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
  766. priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
  767. if (priv->cfg->mod_params->disable_11n)
  768. priv->cfg->sku &= ~IWL_SKU_N;
  769. /* Device-specific setup */
  770. return priv->cfg->ops->lib->set_hw_params(priv);
  771. }
  772. EXPORT_SYMBOL(iwl_set_hw_params);
  773. int iwl_init_drv(struct iwl_priv *priv)
  774. {
  775. int ret;
  776. priv->retry_rate = 1;
  777. priv->ibss_beacon = NULL;
  778. spin_lock_init(&priv->lock);
  779. spin_lock_init(&priv->power_data.lock);
  780. spin_lock_init(&priv->sta_lock);
  781. spin_lock_init(&priv->hcmd_lock);
  782. INIT_LIST_HEAD(&priv->free_frames);
  783. mutex_init(&priv->mutex);
  784. /* Clear the driver's (not device's) station table */
  785. iwl_clear_stations_table(priv);
  786. priv->data_retry_limit = -1;
  787. priv->ieee_channels = NULL;
  788. priv->ieee_rates = NULL;
  789. priv->band = IEEE80211_BAND_2GHZ;
  790. priv->iw_mode = NL80211_IFTYPE_STATION;
  791. priv->use_ant_b_for_management_frame = 1; /* start with ant B */
  792. priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
  793. /* Choose which receivers/antennas to use */
  794. iwl_set_rxon_chain(priv);
  795. iwl_init_scan_params(priv);
  796. if (priv->cfg->mod_params->enable_qos)
  797. priv->qos_data.qos_enable = 1;
  798. iwl_reset_qos(priv);
  799. priv->qos_data.qos_active = 0;
  800. priv->qos_data.qos_cap.val = 0;
  801. priv->rates_mask = IWL_RATES_MASK;
  802. /* If power management is turned on, default to AC mode */
  803. priv->power_mode = IWL_POWER_AC;
  804. priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
  805. ret = iwl_init_channel_map(priv);
  806. if (ret) {
  807. IWL_ERROR("initializing regulatory failed: %d\n", ret);
  808. goto err;
  809. }
  810. ret = iwlcore_init_geos(priv);
  811. if (ret) {
  812. IWL_ERROR("initializing geos failed: %d\n", ret);
  813. goto err_free_channel_map;
  814. }
  815. return 0;
  816. err_free_channel_map:
  817. iwl_free_channel_map(priv);
  818. err:
  819. return ret;
  820. }
  821. EXPORT_SYMBOL(iwl_init_drv);
  822. int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
  823. {
  824. int ret = 0;
  825. if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
  826. IWL_WARNING("Requested user TXPOWER %d below limit.\n",
  827. priv->tx_power_user_lmt);
  828. return -EINVAL;
  829. }
  830. if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
  831. IWL_WARNING("Requested user TXPOWER %d above limit.\n",
  832. priv->tx_power_user_lmt);
  833. return -EINVAL;
  834. }
  835. if (priv->tx_power_user_lmt != tx_power)
  836. force = true;
  837. priv->tx_power_user_lmt = tx_power;
  838. if (force && priv->cfg->ops->lib->send_tx_power)
  839. ret = priv->cfg->ops->lib->send_tx_power(priv);
  840. return ret;
  841. }
  842. EXPORT_SYMBOL(iwl_set_tx_power);
  843. void iwl_uninit_drv(struct iwl_priv *priv)
  844. {
  845. iwl_calib_free_results(priv);
  846. iwlcore_free_geos(priv);
  847. iwl_free_channel_map(priv);
  848. kfree(priv->scan);
  849. }
  850. EXPORT_SYMBOL(iwl_uninit_drv);
  851. int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
  852. {
  853. u32 stat_flags = 0;
  854. struct iwl_host_cmd cmd = {
  855. .id = REPLY_STATISTICS_CMD,
  856. .meta.flags = flags,
  857. .len = sizeof(stat_flags),
  858. .data = (u8 *) &stat_flags,
  859. };
  860. return iwl_send_cmd(priv, &cmd);
  861. }
  862. EXPORT_SYMBOL(iwl_send_statistics_request);
  863. /**
  864. * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
  865. * using sample data 100 bytes apart. If these sample points are good,
  866. * it's a pretty good bet that everything between them is good, too.
  867. */
  868. static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
  869. {
  870. u32 val;
  871. int ret = 0;
  872. u32 errcnt = 0;
  873. u32 i;
  874. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  875. ret = iwl_grab_nic_access(priv);
  876. if (ret)
  877. return ret;
  878. for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
  879. /* read data comes through single port, auto-incr addr */
  880. /* NOTE: Use the debugless read so we don't flood kernel log
  881. * if IWL_DL_IO is set */
  882. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
  883. i + RTC_INST_LOWER_BOUND);
  884. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  885. if (val != le32_to_cpu(*image)) {
  886. ret = -EIO;
  887. errcnt++;
  888. if (errcnt >= 3)
  889. break;
  890. }
  891. }
  892. iwl_release_nic_access(priv);
  893. return ret;
  894. }
  895. /**
  896. * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
  897. * looking at all data.
  898. */
  899. static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
  900. u32 len)
  901. {
  902. u32 val;
  903. u32 save_len = len;
  904. int ret = 0;
  905. u32 errcnt;
  906. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  907. ret = iwl_grab_nic_access(priv);
  908. if (ret)
  909. return ret;
  910. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
  911. errcnt = 0;
  912. for (; len > 0; len -= sizeof(u32), image++) {
  913. /* read data comes through single port, auto-incr addr */
  914. /* NOTE: Use the debugless read so we don't flood kernel log
  915. * if IWL_DL_IO is set */
  916. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  917. if (val != le32_to_cpu(*image)) {
  918. IWL_ERROR("uCode INST section is invalid at "
  919. "offset 0x%x, is 0x%x, s/b 0x%x\n",
  920. save_len - len, val, le32_to_cpu(*image));
  921. ret = -EIO;
  922. errcnt++;
  923. if (errcnt >= 20)
  924. break;
  925. }
  926. }
  927. iwl_release_nic_access(priv);
  928. if (!errcnt)
  929. IWL_DEBUG_INFO
  930. ("ucode image in INSTRUCTION memory is good\n");
  931. return ret;
  932. }
  933. /**
  934. * iwl_verify_ucode - determine which instruction image is in SRAM,
  935. * and verify its contents
  936. */
  937. int iwl_verify_ucode(struct iwl_priv *priv)
  938. {
  939. __le32 *image;
  940. u32 len;
  941. int ret;
  942. /* Try bootstrap */
  943. image = (__le32 *)priv->ucode_boot.v_addr;
  944. len = priv->ucode_boot.len;
  945. ret = iwlcore_verify_inst_sparse(priv, image, len);
  946. if (!ret) {
  947. IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
  948. return 0;
  949. }
  950. /* Try initialize */
  951. image = (__le32 *)priv->ucode_init.v_addr;
  952. len = priv->ucode_init.len;
  953. ret = iwlcore_verify_inst_sparse(priv, image, len);
  954. if (!ret) {
  955. IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
  956. return 0;
  957. }
  958. /* Try runtime/protocol */
  959. image = (__le32 *)priv->ucode_code.v_addr;
  960. len = priv->ucode_code.len;
  961. ret = iwlcore_verify_inst_sparse(priv, image, len);
  962. if (!ret) {
  963. IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
  964. return 0;
  965. }
  966. IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
  967. /* Since nothing seems to match, show first several data entries in
  968. * instruction SRAM, so maybe visual inspection will give a clue.
  969. * Selection of bootstrap image (vs. other images) is arbitrary. */
  970. image = (__le32 *)priv->ucode_boot.v_addr;
  971. len = priv->ucode_boot.len;
  972. ret = iwl_verify_inst_full(priv, image, len);
  973. return ret;
  974. }
  975. EXPORT_SYMBOL(iwl_verify_ucode);
  976. static const char *desc_lookup(int i)
  977. {
  978. switch (i) {
  979. case 1:
  980. return "FAIL";
  981. case 2:
  982. return "BAD_PARAM";
  983. case 3:
  984. return "BAD_CHECKSUM";
  985. case 4:
  986. return "NMI_INTERRUPT";
  987. case 5:
  988. return "SYSASSERT";
  989. case 6:
  990. return "FATAL_ERROR";
  991. }
  992. return "UNKNOWN";
  993. }
  994. #define ERROR_START_OFFSET (1 * sizeof(u32))
  995. #define ERROR_ELEM_SIZE (7 * sizeof(u32))
  996. void iwl_dump_nic_error_log(struct iwl_priv *priv)
  997. {
  998. u32 data2, line;
  999. u32 desc, time, count, base, data1;
  1000. u32 blink1, blink2, ilink1, ilink2;
  1001. int ret;
  1002. if (priv->ucode_type == UCODE_INIT)
  1003. base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
  1004. else
  1005. base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
  1006. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  1007. IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
  1008. return;
  1009. }
  1010. ret = iwl_grab_nic_access(priv);
  1011. if (ret) {
  1012. IWL_WARNING("Can not read from adapter at this time.\n");
  1013. return;
  1014. }
  1015. count = iwl_read_targ_mem(priv, base);
  1016. if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
  1017. IWL_ERROR("Start IWL Error Log Dump:\n");
  1018. IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count);
  1019. }
  1020. desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
  1021. blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
  1022. blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
  1023. ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
  1024. ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
  1025. data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
  1026. data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
  1027. line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
  1028. time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
  1029. IWL_ERROR("Desc Time "
  1030. "data1 data2 line\n");
  1031. IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n",
  1032. desc_lookup(desc), desc, time, data1, data2, line);
  1033. IWL_ERROR("blink1 blink2 ilink1 ilink2\n");
  1034. IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
  1035. ilink1, ilink2);
  1036. iwl_release_nic_access(priv);
  1037. }
  1038. EXPORT_SYMBOL(iwl_dump_nic_error_log);
  1039. #define EVENT_START_OFFSET (4 * sizeof(u32))
  1040. /**
  1041. * iwl_print_event_log - Dump error event log to syslog
  1042. *
  1043. * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  1044. */
  1045. static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
  1046. u32 num_events, u32 mode)
  1047. {
  1048. u32 i;
  1049. u32 base; /* SRAM byte address of event log header */
  1050. u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
  1051. u32 ptr; /* SRAM byte address of log data */
  1052. u32 ev, time, data; /* event log data */
  1053. if (num_events == 0)
  1054. return;
  1055. if (priv->ucode_type == UCODE_INIT)
  1056. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1057. else
  1058. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1059. if (mode == 0)
  1060. event_size = 2 * sizeof(u32);
  1061. else
  1062. event_size = 3 * sizeof(u32);
  1063. ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
  1064. /* "time" is actually "data" for mode 0 (no timestamp).
  1065. * place event id # at far right for easier visual parsing. */
  1066. for (i = 0; i < num_events; i++) {
  1067. ev = iwl_read_targ_mem(priv, ptr);
  1068. ptr += sizeof(u32);
  1069. time = iwl_read_targ_mem(priv, ptr);
  1070. ptr += sizeof(u32);
  1071. if (mode == 0) {
  1072. /* data, ev */
  1073. IWL_ERROR("EVT_LOG:0x%08x:%04u\n", time, ev);
  1074. } else {
  1075. data = iwl_read_targ_mem(priv, ptr);
  1076. ptr += sizeof(u32);
  1077. IWL_ERROR("EVT_LOGT:%010u:0x%08x:%04u\n",
  1078. time, data, ev);
  1079. }
  1080. }
  1081. }
  1082. void iwl_dump_nic_event_log(struct iwl_priv *priv)
  1083. {
  1084. int ret;
  1085. u32 base; /* SRAM byte address of event log header */
  1086. u32 capacity; /* event log capacity in # entries */
  1087. u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
  1088. u32 num_wraps; /* # times uCode wrapped to top of log */
  1089. u32 next_entry; /* index of next entry to be written by uCode */
  1090. u32 size; /* # entries that we'll print */
  1091. if (priv->ucode_type == UCODE_INIT)
  1092. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1093. else
  1094. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1095. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  1096. IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
  1097. return;
  1098. }
  1099. ret = iwl_grab_nic_access(priv);
  1100. if (ret) {
  1101. IWL_WARNING("Can not read from adapter at this time.\n");
  1102. return;
  1103. }
  1104. /* event log header */
  1105. capacity = iwl_read_targ_mem(priv, base);
  1106. mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
  1107. num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
  1108. next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
  1109. size = num_wraps ? capacity : next_entry;
  1110. /* bail out if nothing in log */
  1111. if (size == 0) {
  1112. IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
  1113. iwl_release_nic_access(priv);
  1114. return;
  1115. }
  1116. IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
  1117. size, num_wraps);
  1118. /* if uCode has wrapped back to top of log, start at the oldest entry,
  1119. * i.e the next one that uCode would fill. */
  1120. if (num_wraps)
  1121. iwl_print_event_log(priv, next_entry,
  1122. capacity - next_entry, mode);
  1123. /* (then/else) start at top of log */
  1124. iwl_print_event_log(priv, 0, next_entry, mode);
  1125. iwl_release_nic_access(priv);
  1126. }
  1127. EXPORT_SYMBOL(iwl_dump_nic_event_log);
  1128. void iwl_rf_kill_ct_config(struct iwl_priv *priv)
  1129. {
  1130. struct iwl_ct_kill_config cmd;
  1131. unsigned long flags;
  1132. int ret = 0;
  1133. spin_lock_irqsave(&priv->lock, flags);
  1134. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
  1135. CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
  1136. spin_unlock_irqrestore(&priv->lock, flags);
  1137. cmd.critical_temperature_R =
  1138. cpu_to_le32(priv->hw_params.ct_kill_threshold);
  1139. ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
  1140. sizeof(cmd), &cmd);
  1141. if (ret)
  1142. IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n");
  1143. else
  1144. IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
  1145. "critical temperature is %d\n",
  1146. cmd.critical_temperature_R);
  1147. }
  1148. EXPORT_SYMBOL(iwl_rf_kill_ct_config);
  1149. /*
  1150. * CARD_STATE_CMD
  1151. *
  1152. * Use: Sets the device's internal card state to enable, disable, or halt
  1153. *
  1154. * When in the 'enable' state the card operates as normal.
  1155. * When in the 'disable' state, the card enters into a low power mode.
  1156. * When in the 'halt' state, the card is shut down and must be fully
  1157. * restarted to come back on.
  1158. */
  1159. static int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
  1160. {
  1161. struct iwl_host_cmd cmd = {
  1162. .id = REPLY_CARD_STATE_CMD,
  1163. .len = sizeof(u32),
  1164. .data = &flags,
  1165. .meta.flags = meta_flag,
  1166. };
  1167. return iwl_send_cmd(priv, &cmd);
  1168. }
  1169. void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
  1170. {
  1171. unsigned long flags;
  1172. if (test_bit(STATUS_RF_KILL_SW, &priv->status))
  1173. return;
  1174. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n");
  1175. iwl_scan_cancel(priv);
  1176. /* FIXME: This is a workaround for AP */
  1177. if (priv->iw_mode != NL80211_IFTYPE_AP) {
  1178. spin_lock_irqsave(&priv->lock, flags);
  1179. iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
  1180. CSR_UCODE_SW_BIT_RFKILL);
  1181. spin_unlock_irqrestore(&priv->lock, flags);
  1182. /* call the host command only if no hw rf-kill set */
  1183. if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
  1184. iwl_is_ready(priv))
  1185. iwl_send_card_state(priv,
  1186. CARD_STATE_CMD_DISABLE, 0);
  1187. set_bit(STATUS_RF_KILL_SW, &priv->status);
  1188. /* make sure mac80211 stop sending Tx frame */
  1189. if (priv->mac80211_registered)
  1190. ieee80211_stop_queues(priv->hw);
  1191. }
  1192. }
  1193. EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
  1194. int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
  1195. {
  1196. unsigned long flags;
  1197. if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
  1198. return 0;
  1199. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n");
  1200. spin_lock_irqsave(&priv->lock, flags);
  1201. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
  1202. /* If the driver is up it will receive CARD_STATE_NOTIFICATION
  1203. * notification where it will clear SW rfkill status.
  1204. * Setting it here would break the handler. Only if the
  1205. * interface is down we can set here since we don't
  1206. * receive any further notification.
  1207. */
  1208. if (!priv->is_open)
  1209. clear_bit(STATUS_RF_KILL_SW, &priv->status);
  1210. spin_unlock_irqrestore(&priv->lock, flags);
  1211. /* wake up ucode */
  1212. msleep(10);
  1213. spin_lock_irqsave(&priv->lock, flags);
  1214. iwl_read32(priv, CSR_UCODE_DRV_GP1);
  1215. if (!iwl_grab_nic_access(priv))
  1216. iwl_release_nic_access(priv);
  1217. spin_unlock_irqrestore(&priv->lock, flags);
  1218. if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
  1219. IWL_DEBUG_RF_KILL("Can not turn radio back on - "
  1220. "disabled by HW switch\n");
  1221. return 0;
  1222. }
  1223. /* If the driver is already loaded, it will receive
  1224. * CARD_STATE_NOTIFICATION notifications and the handler will
  1225. * call restart to reload the driver.
  1226. */
  1227. return 1;
  1228. }
  1229. EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);