idle.c 3.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149
  1. /*
  2. * Idle daemon for PowerPC. Idle daemon will handle any action
  3. * that needs to be taken when the system becomes idle.
  4. *
  5. * Originally written by Cort Dougan (cort@cs.nmt.edu).
  6. * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
  7. * Paul Mackerras and others.
  8. *
  9. * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com>
  10. *
  11. * Additional shared processor, SMT, and firmware support
  12. * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com>
  13. *
  14. * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org>
  15. *
  16. * This program is free software; you can redistribute it and/or
  17. * modify it under the terms of the GNU General Public License
  18. * as published by the Free Software Foundation; either version
  19. * 2 of the License, or (at your option) any later version.
  20. */
  21. #include <linux/sched.h>
  22. #include <linux/kernel.h>
  23. #include <linux/smp.h>
  24. #include <linux/cpu.h>
  25. #include <linux/sysctl.h>
  26. #include <linux/tick.h>
  27. #include <asm/system.h>
  28. #include <asm/processor.h>
  29. #include <asm/cputable.h>
  30. #include <asm/time.h>
  31. #include <asm/machdep.h>
  32. #include <asm/smp.h>
  33. #ifdef CONFIG_HOTPLUG_CPU
  34. #define cpu_should_die() cpu_is_offline(smp_processor_id())
  35. #else
  36. #define cpu_should_die() 0
  37. #endif
  38. static int __init powersave_off(char *arg)
  39. {
  40. ppc_md.power_save = NULL;
  41. return 0;
  42. }
  43. __setup("powersave=off", powersave_off);
  44. #if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_TRACEPOINTS)
  45. static const bool idle_uses_rcu = 1;
  46. #else
  47. static const bool idle_uses_rcu;
  48. #endif
  49. /*
  50. * The body of the idle task.
  51. */
  52. void cpu_idle(void)
  53. {
  54. if (ppc_md.idle_loop)
  55. ppc_md.idle_loop(); /* doesn't return */
  56. set_thread_flag(TIF_POLLING_NRFLAG);
  57. while (1) {
  58. tick_nohz_idle_enter();
  59. if (!idle_uses_rcu)
  60. rcu_idle_enter();
  61. while (!need_resched() && !cpu_should_die()) {
  62. ppc64_runlatch_off();
  63. if (ppc_md.power_save) {
  64. clear_thread_flag(TIF_POLLING_NRFLAG);
  65. /*
  66. * smp_mb is so clearing of TIF_POLLING_NRFLAG
  67. * is ordered w.r.t. need_resched() test.
  68. */
  69. smp_mb();
  70. local_irq_disable();
  71. /* Don't trace irqs off for idle */
  72. stop_critical_timings();
  73. /* check again after disabling irqs */
  74. if (!need_resched() && !cpu_should_die())
  75. ppc_md.power_save();
  76. start_critical_timings();
  77. local_irq_enable();
  78. set_thread_flag(TIF_POLLING_NRFLAG);
  79. } else {
  80. /*
  81. * Go into low thread priority and possibly
  82. * low power mode.
  83. */
  84. HMT_low();
  85. HMT_very_low();
  86. }
  87. }
  88. HMT_medium();
  89. ppc64_runlatch_on();
  90. if (!idle_uses_rcu)
  91. rcu_idle_exit();
  92. tick_nohz_idle_exit();
  93. preempt_enable_no_resched();
  94. if (cpu_should_die())
  95. cpu_die();
  96. schedule();
  97. preempt_disable();
  98. }
  99. }
  100. int powersave_nap;
  101. #ifdef CONFIG_SYSCTL
  102. /*
  103. * Register the sysctl to set/clear powersave_nap.
  104. */
  105. static ctl_table powersave_nap_ctl_table[]={
  106. {
  107. .procname = "powersave-nap",
  108. .data = &powersave_nap,
  109. .maxlen = sizeof(int),
  110. .mode = 0644,
  111. .proc_handler = proc_dointvec,
  112. },
  113. {}
  114. };
  115. static ctl_table powersave_nap_sysctl_root[] = {
  116. {
  117. .procname = "kernel",
  118. .mode = 0555,
  119. .child = powersave_nap_ctl_table,
  120. },
  121. {}
  122. };
  123. static int __init
  124. register_powersave_nap_sysctl(void)
  125. {
  126. register_sysctl_table(powersave_nap_sysctl_root);
  127. return 0;
  128. }
  129. __initcall(register_powersave_nap_sysctl);
  130. #endif