rz1000.c 2.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687
  1. /*
  2. * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
  3. *
  4. * Copyright (C) 1995-1998 Linus Torvalds & author (see below)
  5. */
  6. /*
  7. * Principal Author: mlord@pobox.com (Mark Lord)
  8. *
  9. * See linux/MAINTAINERS for address of current maintainer.
  10. *
  11. * This file provides support for disabling the buggy read-ahead
  12. * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
  13. *
  14. * Dunno if this fixes both ports, or only the primary port (?).
  15. */
  16. #include <linux/types.h>
  17. #include <linux/module.h>
  18. #include <linux/kernel.h>
  19. #include <linux/delay.h>
  20. #include <linux/timer.h>
  21. #include <linux/mm.h>
  22. #include <linux/ioport.h>
  23. #include <linux/blkdev.h>
  24. #include <linux/hdreg.h>
  25. #include <linux/pci.h>
  26. #include <linux/ide.h>
  27. #include <linux/init.h>
  28. #include <asm/io.h>
  29. static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
  30. {
  31. u16 reg;
  32. struct pci_dev *dev = hwif->pci_dev;
  33. if (!pci_read_config_word (dev, 0x40, &reg) &&
  34. !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
  35. printk(KERN_INFO "%s: disabled chipset read-ahead "
  36. "(buggy RZ1000/RZ1001)\n", hwif->name);
  37. } else {
  38. if (hwif->mate)
  39. hwif->mate->serialized = hwif->serialized = 1;
  40. hwif->drives[0].no_unmask = 1;
  41. hwif->drives[1].no_unmask = 1;
  42. printk(KERN_INFO "%s: serialized, disabled unmasking "
  43. "(buggy RZ1000/RZ1001)\n", hwif->name);
  44. }
  45. }
  46. static const struct ide_port_info rz1000_chipset __devinitdata = {
  47. .name = "RZ100x",
  48. .init_hwif = init_hwif_rz1000,
  49. .chipset = ide_rz1000,
  50. .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_BOOTABLE,
  51. };
  52. static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
  53. {
  54. return ide_setup_pci_device(dev, &rz1000_chipset);
  55. }
  56. static const struct pci_device_id rz1000_pci_tbl[] = {
  57. { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), 0 },
  58. { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), 0 },
  59. { 0, },
  60. };
  61. MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
  62. static struct pci_driver driver = {
  63. .name = "RZ1000_IDE",
  64. .id_table = rz1000_pci_tbl,
  65. .probe = rz1000_init_one,
  66. };
  67. static int __init rz1000_ide_init(void)
  68. {
  69. return ide_pci_register_driver(&driver);
  70. }
  71. module_init(rz1000_ide_init);
  72. MODULE_AUTHOR("Andre Hedrick");
  73. MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
  74. MODULE_LICENSE("GPL");