123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766 |
- /*
- * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
- *
- * Copyright (C) 2011 Samsung Electronics
- * Donggeun Kim <dg77.kim@samsung.com>
- * Amit Daniel Kachhap <amit.kachhap@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
- #include <linux/clk.h>
- #include <linux/io.h>
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/platform_device.h>
- #include <linux/regulator/consumer.h>
- #include "exynos_thermal_common.h"
- #include "exynos_tmu.h"
- #include "exynos_tmu_data.h"
- /**
- * struct exynos_tmu_data : A structure to hold the private data of the TMU
- driver
- * @id: identifier of the one instance of the TMU controller.
- * @pdata: pointer to the tmu platform/configuration data
- * @base: base address of the single instance of the TMU controller.
- * @base_common: base address of the common registers of the TMU controller.
- * @irq: irq number of the TMU controller.
- * @soc: id of the SOC type.
- * @irq_work: pointer to the irq work structure.
- * @lock: lock to implement synchronization.
- * @clk: pointer to the clock structure.
- * @temp_error1: fused value of the first point trim.
- * @temp_error2: fused value of the second point trim.
- * @regulator: pointer to the TMU regulator structure.
- * @reg_conf: pointer to structure to register with core thermal.
- */
- struct exynos_tmu_data {
- int id;
- struct exynos_tmu_platform_data *pdata;
- void __iomem *base;
- void __iomem *base_common;
- int irq;
- enum soc_type soc;
- struct work_struct irq_work;
- struct mutex lock;
- struct clk *clk;
- u8 temp_error1, temp_error2;
- struct regulator *regulator;
- struct thermal_sensor_conf *reg_conf;
- };
- /*
- * TMU treats temperature as a mapped temperature code.
- * The temperature is converted differently depending on the calibration type.
- */
- static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
- {
- struct exynos_tmu_platform_data *pdata = data->pdata;
- int temp_code;
- if (pdata->cal_mode == HW_MODE)
- return temp;
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp should range between 25 and 125 */
- if (temp < 25 || temp > 125) {
- temp_code = -EINVAL;
- goto out;
- }
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- temp_code = (temp - pdata->first_point_trim) *
- (data->temp_error2 - data->temp_error1) /
- (pdata->second_point_trim - pdata->first_point_trim) +
- data->temp_error1;
- break;
- case TYPE_ONE_POINT_TRIMMING:
- temp_code = temp + data->temp_error1 - pdata->first_point_trim;
- break;
- default:
- temp_code = temp + pdata->default_temp_offset;
- break;
- }
- out:
- return temp_code;
- }
- /*
- * Calculate a temperature value from a temperature code.
- * The unit of the temperature is degree Celsius.
- */
- static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
- {
- struct exynos_tmu_platform_data *pdata = data->pdata;
- int temp;
- if (pdata->cal_mode == HW_MODE)
- return temp_code;
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp_code should range between 75 and 175 */
- if (temp_code < 75 || temp_code > 175) {
- temp = -ENODATA;
- goto out;
- }
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- temp = (temp_code - data->temp_error1) *
- (pdata->second_point_trim - pdata->first_point_trim) /
- (data->temp_error2 - data->temp_error1) +
- pdata->first_point_trim;
- break;
- case TYPE_ONE_POINT_TRIMMING:
- temp = temp_code - data->temp_error1 + pdata->first_point_trim;
- break;
- default:
- temp = temp_code - pdata->default_temp_offset;
- break;
- }
- out:
- return temp;
- }
- static int exynos_tmu_initialize(struct platform_device *pdev)
- {
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i, trigger_levs = 0;
- mutex_lock(&data->lock);
- clk_enable(data->clk);
- if (TMU_SUPPORTS(pdata, READY_STATUS)) {
- status = readb(data->base + reg->tmu_status);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
- }
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
- __raw_writel(1, data->base + reg->triminfo_ctrl);
- if (pdata->cal_mode == HW_MODE)
- goto skip_calib_data;
- /* Save trimming info in order to perform calibration */
- if (data->soc == SOC_ARCH_EXYNOS5440) {
- /*
- * For exynos5440 soc triminfo value is swapped between TMU0 and
- * TMU2, so the below logic is needed.
- */
- switch (data->id) {
- case 0:
- trim_info = readl(data->base +
- EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
- break;
- case 1:
- trim_info = readl(data->base + reg->triminfo_data);
- break;
- case 2:
- trim_info = readl(data->base -
- EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
- }
- } else {
- trim_info = readl(data->base + reg->triminfo_data);
- }
- data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
- data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
- EXYNOS_TMU_TEMP_MASK);
- if (!data->temp_error1 ||
- (pdata->min_efuse_value > data->temp_error1) ||
- (data->temp_error1 > pdata->max_efuse_value))
- data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
- if (!data->temp_error2)
- data->temp_error2 =
- (pdata->efuse_value >> reg->triminfo_85_shift) &
- EXYNOS_TMU_TEMP_MASK;
- skip_calib_data:
- if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
- dev_err(&pdev->dev, "Invalid max trigger level\n");
- goto out;
- }
- for (i = 0; i < pdata->max_trigger_level; i++) {
- if (!pdata->trigger_levels[i])
- continue;
- if ((pdata->trigger_type[i] == HW_TRIP) &&
- (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
- dev_err(&pdev->dev, "Invalid hw trigger level\n");
- ret = -EINVAL;
- goto out;
- }
- /* Count trigger levels except the HW trip*/
- if (!(pdata->trigger_type[i] == HW_TRIP))
- trigger_levs++;
- }
- if (data->soc == SOC_ARCH_EXYNOS4210) {
- /* Write temperature code for threshold */
- threshold_code = temp_to_code(data, pdata->threshold);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
- writeb(threshold_code,
- data->base + reg->threshold_temp);
- for (i = 0; i < trigger_levs; i++)
- writeb(pdata->trigger_levels[i], data->base +
- reg->threshold_th0 + i * sizeof(reg->threshold_th0));
- writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
- } else {
- /* Write temperature code for rising and falling threshold */
- for (i = 0;
- i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
- threshold_code = temp_to_code(data,
- pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
- rising_threshold |= threshold_code << 8 * i;
- if (pdata->threshold_falling) {
- threshold_code = temp_to_code(data,
- pdata->trigger_levels[i] -
- pdata->threshold_falling);
- if (threshold_code > 0)
- falling_threshold |=
- threshold_code << 8 * i;
- }
- }
- writel(rising_threshold,
- data->base + reg->threshold_th0);
- writel(falling_threshold,
- data->base + reg->threshold_th1);
- writel((reg->inten_rise_mask << reg->inten_rise_shift) |
- (reg->inten_fall_mask << reg->inten_fall_shift),
- data->base + reg->tmu_intclear);
- /* if last threshold limit is also present */
- i = pdata->max_trigger_level - 1;
- if (pdata->trigger_levels[i] &&
- (pdata->trigger_type[i] == HW_TRIP)) {
- threshold_code = temp_to_code(data,
- pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
- if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
- /* 1-4 level to be assigned in th0 reg */
- rising_threshold |= threshold_code << 8 * i;
- writel(rising_threshold,
- data->base + reg->threshold_th0);
- } else if (i == EXYNOS_MAX_TRIGGER_PER_REG) {
- /* 5th level to be assigned in th2 reg */
- rising_threshold =
- threshold_code << reg->threshold_th3_l0_shift;
- writel(rising_threshold,
- data->base + reg->threshold_th2);
- }
- con = readl(data->base + reg->tmu_ctrl);
- con |= (1 << reg->therm_trip_en_shift);
- writel(con, data->base + reg->tmu_ctrl);
- }
- }
- /*Clear the PMIN in the common TMU register*/
- if (reg->tmu_pmin && !data->id)
- writel(0, data->base_common + reg->tmu_pmin);
- out:
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
- return ret;
- }
- static void exynos_tmu_control(struct platform_device *pdev, bool on)
- {
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int con, interrupt_en, cal_val;
- mutex_lock(&data->lock);
- clk_enable(data->clk);
- con = readl(data->base + reg->tmu_ctrl);
- if (pdata->test_mux)
- con |= (pdata->test_mux << reg->test_mux_addr_shift);
- if (pdata->reference_voltage) {
- con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
- con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
- }
- if (pdata->gain) {
- con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
- con |= (pdata->gain << reg->buf_slope_sel_shift);
- }
- if (pdata->noise_cancel_mode) {
- con &= ~(reg->therm_trip_mode_mask <<
- reg->therm_trip_mode_shift);
- con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
- }
- if (pdata->cal_mode == HW_MODE) {
- con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
- cal_val = 0;
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- cal_val = 3;
- break;
- case TYPE_ONE_POINT_TRIMMING_85:
- cal_val = 2;
- break;
- case TYPE_ONE_POINT_TRIMMING_25:
- cal_val = 1;
- break;
- case TYPE_NONE:
- break;
- default:
- dev_err(&pdev->dev, "Invalid calibration type, using none\n");
- }
- con |= cal_val << reg->calib_mode_shift;
- }
- if (on) {
- con |= (1 << reg->core_en_shift);
- interrupt_en =
- pdata->trigger_enable[3] << reg->inten_rise3_shift |
- pdata->trigger_enable[2] << reg->inten_rise2_shift |
- pdata->trigger_enable[1] << reg->inten_rise1_shift |
- pdata->trigger_enable[0] << reg->inten_rise0_shift;
- if (TMU_SUPPORTS(pdata, FALLING_TRIP))
- interrupt_en |=
- interrupt_en << reg->inten_fall0_shift;
- } else {
- con &= ~(1 << reg->core_en_shift);
- interrupt_en = 0; /* Disable all interrupts */
- }
- writel(interrupt_en, data->base + reg->tmu_inten);
- writel(con, data->base + reg->tmu_ctrl);
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
- }
- static int exynos_tmu_read(struct exynos_tmu_data *data)
- {
- struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- u8 temp_code;
- int temp;
- mutex_lock(&data->lock);
- clk_enable(data->clk);
- temp_code = readb(data->base + reg->tmu_cur_temp);
- temp = code_to_temp(data, temp_code);
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
- return temp;
- }
- #ifdef CONFIG_THERMAL_EMULATION
- static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
- {
- struct exynos_tmu_data *data = drv_data;
- struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val;
- int ret = -EINVAL;
- if (!TMU_SUPPORTS(pdata, EMULATION))
- goto out;
- if (temp && temp < MCELSIUS)
- goto out;
- mutex_lock(&data->lock);
- clk_enable(data->clk);
- val = readl(data->base + reg->emul_con);
- if (temp) {
- temp /= MCELSIUS;
- if (TMU_SUPPORTS(pdata, EMUL_TIME)) {
- val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift);
- val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
- }
- val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift);
- val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
- EXYNOS_EMUL_ENABLE;
- } else {
- val &= ~EXYNOS_EMUL_ENABLE;
- }
- writel(val, data->base + reg->emul_con);
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
- return 0;
- out:
- return ret;
- }
- #else
- static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
- { return -EINVAL; }
- #endif/*CONFIG_THERMAL_EMULATION*/
- static void exynos_tmu_work(struct work_struct *work)
- {
- struct exynos_tmu_data *data = container_of(work,
- struct exynos_tmu_data, irq_work);
- struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val_irq, val_type;
- /* Find which sensor generated this interrupt */
- if (reg->tmu_irqstatus) {
- val_type = readl(data->base_common + reg->tmu_irqstatus);
- if (!((val_type >> data->id) & 0x1))
- goto out;
- }
- exynos_report_trigger(data->reg_conf);
- mutex_lock(&data->lock);
- clk_enable(data->clk);
- /* TODO: take action based on particular interrupt */
- val_irq = readl(data->base + reg->tmu_intstat);
- /* clear the interrupts */
- writel(val_irq, data->base + reg->tmu_intclear);
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
- out:
- enable_irq(data->irq);
- }
- static irqreturn_t exynos_tmu_irq(int irq, void *id)
- {
- struct exynos_tmu_data *data = id;
- disable_irq_nosync(irq);
- schedule_work(&data->irq_work);
- return IRQ_HANDLED;
- }
- static const struct of_device_id exynos_tmu_match[] = {
- {
- .compatible = "samsung,exynos4210-tmu",
- .data = (void *)EXYNOS4210_TMU_DRV_DATA,
- },
- {
- .compatible = "samsung,exynos4412-tmu",
- .data = (void *)EXYNOS4412_TMU_DRV_DATA,
- },
- {
- .compatible = "samsung,exynos5250-tmu",
- .data = (void *)EXYNOS5250_TMU_DRV_DATA,
- },
- {
- .compatible = "samsung,exynos5440-tmu",
- .data = (void *)EXYNOS5440_TMU_DRV_DATA,
- },
- {},
- };
- MODULE_DEVICE_TABLE(of, exynos_tmu_match);
- static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
- struct platform_device *pdev, int id)
- {
- struct exynos_tmu_init_data *data_table;
- struct exynos_tmu_platform_data *tmu_data;
- const struct of_device_id *match;
- match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
- if (!match)
- return NULL;
- data_table = (struct exynos_tmu_init_data *) match->data;
- if (!data_table || id >= data_table->tmu_count)
- return NULL;
- tmu_data = data_table->tmu_data;
- return (struct exynos_tmu_platform_data *) (tmu_data + id);
- }
- static int exynos_map_dt_data(struct platform_device *pdev)
- {
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata;
- struct resource res;
- int ret;
- if (!data || !pdev->dev.of_node)
- return -ENODEV;
- /*
- * Try enabling the regulator if found
- * TODO: Add regulator as an SOC feature, so that regulator enable
- * is a compulsory call.
- */
- data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
- if (!IS_ERR(data->regulator)) {
- ret = regulator_enable(data->regulator);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable vtmu\n");
- return ret;
- }
- } else {
- dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
- }
- data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
- if (data->id < 0)
- data->id = 0;
- data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
- if (data->irq <= 0) {
- dev_err(&pdev->dev, "failed to get IRQ\n");
- return -ENODEV;
- }
- if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
- dev_err(&pdev->dev, "failed to get Resource 0\n");
- return -ENODEV;
- }
- data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
- if (!data->base) {
- dev_err(&pdev->dev, "Failed to ioremap memory\n");
- return -EADDRNOTAVAIL;
- }
- pdata = exynos_get_driver_data(pdev, data->id);
- if (!pdata) {
- dev_err(&pdev->dev, "No platform init data supplied.\n");
- return -ENODEV;
- }
- data->pdata = pdata;
- /*
- * Check if the TMU shares some registers and then try to map the
- * memory of common registers.
- */
- if (!TMU_SUPPORTS(pdata, SHARED_MEMORY))
- return 0;
- if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
- dev_err(&pdev->dev, "failed to get Resource 1\n");
- return -ENODEV;
- }
- data->base_common = devm_ioremap(&pdev->dev, res.start,
- resource_size(&res));
- if (!data->base_common) {
- dev_err(&pdev->dev, "Failed to ioremap memory\n");
- return -ENOMEM;
- }
- return 0;
- }
- static int exynos_tmu_probe(struct platform_device *pdev)
- {
- struct exynos_tmu_data *data;
- struct exynos_tmu_platform_data *pdata;
- struct thermal_sensor_conf *sensor_conf;
- int ret, i;
- data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
- GFP_KERNEL);
- if (!data) {
- dev_err(&pdev->dev, "Failed to allocate driver structure\n");
- return -ENOMEM;
- }
- platform_set_drvdata(pdev, data);
- mutex_init(&data->lock);
- ret = exynos_map_dt_data(pdev);
- if (ret)
- return ret;
- pdata = data->pdata;
- INIT_WORK(&data->irq_work, exynos_tmu_work);
- data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
- if (IS_ERR(data->clk)) {
- dev_err(&pdev->dev, "Failed to get clock\n");
- return PTR_ERR(data->clk);
- }
- ret = clk_prepare(data->clk);
- if (ret)
- return ret;
- if (pdata->type == SOC_ARCH_EXYNOS4210 ||
- pdata->type == SOC_ARCH_EXYNOS4412 ||
- pdata->type == SOC_ARCH_EXYNOS5250 ||
- pdata->type == SOC_ARCH_EXYNOS5440)
- data->soc = pdata->type;
- else {
- ret = -EINVAL;
- dev_err(&pdev->dev, "Platform not supported\n");
- goto err_clk;
- }
- ret = exynos_tmu_initialize(pdev);
- if (ret) {
- dev_err(&pdev->dev, "Failed to initialize TMU\n");
- goto err_clk;
- }
- exynos_tmu_control(pdev, true);
- /* Allocate a structure to register with the exynos core thermal */
- sensor_conf = devm_kzalloc(&pdev->dev,
- sizeof(struct thermal_sensor_conf), GFP_KERNEL);
- if (!sensor_conf) {
- dev_err(&pdev->dev, "Failed to allocate registration struct\n");
- ret = -ENOMEM;
- goto err_clk;
- }
- sprintf(sensor_conf->name, "therm_zone%d", data->id);
- sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
- sensor_conf->write_emul_temp =
- (int (*)(void *, unsigned long))exynos_tmu_set_emulation;
- sensor_conf->driver_data = data;
- sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
- pdata->trigger_enable[1] + pdata->trigger_enable[2]+
- pdata->trigger_enable[3];
- for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
- sensor_conf->trip_data.trip_val[i] =
- pdata->threshold + pdata->trigger_levels[i];
- sensor_conf->trip_data.trip_type[i] =
- pdata->trigger_type[i];
- }
- sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
- sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
- for (i = 0; i < pdata->freq_tab_count; i++) {
- sensor_conf->cooling_data.freq_data[i].freq_clip_max =
- pdata->freq_tab[i].freq_clip_max;
- sensor_conf->cooling_data.freq_data[i].temp_level =
- pdata->freq_tab[i].temp_level;
- }
- sensor_conf->dev = &pdev->dev;
- /* Register the sensor with thermal management interface */
- ret = exynos_register_thermal(sensor_conf);
- if (ret) {
- dev_err(&pdev->dev, "Failed to register thermal interface\n");
- goto err_clk;
- }
- data->reg_conf = sensor_conf;
- ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
- IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
- if (ret) {
- dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
- goto err_clk;
- }
- return 0;
- err_clk:
- clk_unprepare(data->clk);
- return ret;
- }
- static int exynos_tmu_remove(struct platform_device *pdev)
- {
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- exynos_tmu_control(pdev, false);
- exynos_unregister_thermal(data->reg_conf);
- clk_unprepare(data->clk);
- if (!IS_ERR(data->regulator))
- regulator_disable(data->regulator);
- return 0;
- }
- #ifdef CONFIG_PM_SLEEP
- static int exynos_tmu_suspend(struct device *dev)
- {
- exynos_tmu_control(to_platform_device(dev), false);
- return 0;
- }
- static int exynos_tmu_resume(struct device *dev)
- {
- struct platform_device *pdev = to_platform_device(dev);
- exynos_tmu_initialize(pdev);
- exynos_tmu_control(pdev, true);
- return 0;
- }
- static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
- exynos_tmu_suspend, exynos_tmu_resume);
- #define EXYNOS_TMU_PM (&exynos_tmu_pm)
- #else
- #define EXYNOS_TMU_PM NULL
- #endif
- static struct platform_driver exynos_tmu_driver = {
- .driver = {
- .name = "exynos-tmu",
- .owner = THIS_MODULE,
- .pm = EXYNOS_TMU_PM,
- .of_match_table = exynos_tmu_match,
- },
- .probe = exynos_tmu_probe,
- .remove = exynos_tmu_remove,
- };
- module_platform_driver(exynos_tmu_driver);
- MODULE_DESCRIPTION("EXYNOS TMU Driver");
- MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
- MODULE_LICENSE("GPL");
- MODULE_ALIAS("platform:exynos-tmu");
|