quirks.c 26 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890
  1. /*
  2. * This program is free software; you can redistribute it and/or modify
  3. * it under the terms of the GNU General Public License as published by
  4. * the Free Software Foundation; either version 2 of the License, or
  5. * (at your option) any later version.
  6. *
  7. * This program is distributed in the hope that it will be useful,
  8. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. * GNU General Public License for more details.
  11. *
  12. * You should have received a copy of the GNU General Public License
  13. * along with this program; if not, write to the Free Software
  14. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  15. */
  16. #include <linux/init.h>
  17. #include <linux/slab.h>
  18. #include <linux/usb.h>
  19. #include <linux/usb/audio.h>
  20. #include <sound/control.h>
  21. #include <sound/core.h>
  22. #include <sound/info.h>
  23. #include <sound/pcm.h>
  24. #include "usbaudio.h"
  25. #include "card.h"
  26. #include "mixer.h"
  27. #include "mixer_quirks.h"
  28. #include "midi.h"
  29. #include "quirks.h"
  30. #include "helper.h"
  31. #include "endpoint.h"
  32. #include "pcm.h"
  33. #include "clock.h"
  34. #include "stream.h"
  35. /*
  36. * handle the quirks for the contained interfaces
  37. */
  38. static int create_composite_quirk(struct snd_usb_audio *chip,
  39. struct usb_interface *iface,
  40. struct usb_driver *driver,
  41. const struct snd_usb_audio_quirk *quirk)
  42. {
  43. int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
  44. int err;
  45. for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) {
  46. iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
  47. if (!iface)
  48. continue;
  49. if (quirk->ifnum != probed_ifnum &&
  50. usb_interface_claimed(iface))
  51. continue;
  52. err = snd_usb_create_quirk(chip, iface, driver, quirk);
  53. if (err < 0)
  54. return err;
  55. if (quirk->ifnum != probed_ifnum)
  56. usb_driver_claim_interface(driver, iface, (void *)-1L);
  57. }
  58. return 0;
  59. }
  60. static int ignore_interface_quirk(struct snd_usb_audio *chip,
  61. struct usb_interface *iface,
  62. struct usb_driver *driver,
  63. const struct snd_usb_audio_quirk *quirk)
  64. {
  65. return 0;
  66. }
  67. /*
  68. * Allow alignment on audio sub-slot (channel samples) rather than
  69. * on audio slots (audio frames)
  70. */
  71. static int create_align_transfer_quirk(struct snd_usb_audio *chip,
  72. struct usb_interface *iface,
  73. struct usb_driver *driver,
  74. const struct snd_usb_audio_quirk *quirk)
  75. {
  76. chip->txfr_quirk = 1;
  77. return 1; /* Continue with creating streams and mixer */
  78. }
  79. static int create_any_midi_quirk(struct snd_usb_audio *chip,
  80. struct usb_interface *intf,
  81. struct usb_driver *driver,
  82. const struct snd_usb_audio_quirk *quirk)
  83. {
  84. return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
  85. }
  86. /*
  87. * create a stream for an interface with proper descriptors
  88. */
  89. static int create_standard_audio_quirk(struct snd_usb_audio *chip,
  90. struct usb_interface *iface,
  91. struct usb_driver *driver,
  92. const struct snd_usb_audio_quirk *quirk)
  93. {
  94. struct usb_host_interface *alts;
  95. struct usb_interface_descriptor *altsd;
  96. int err;
  97. alts = &iface->altsetting[0];
  98. altsd = get_iface_desc(alts);
  99. err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
  100. if (err < 0) {
  101. snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
  102. altsd->bInterfaceNumber, err);
  103. return err;
  104. }
  105. /* reset the current interface */
  106. usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0);
  107. return 0;
  108. }
  109. /*
  110. * create a stream for an endpoint/altsetting without proper descriptors
  111. */
  112. static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
  113. struct usb_interface *iface,
  114. struct usb_driver *driver,
  115. const struct snd_usb_audio_quirk *quirk)
  116. {
  117. struct audioformat *fp;
  118. struct usb_host_interface *alts;
  119. int stream, err;
  120. unsigned *rate_table = NULL;
  121. fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
  122. if (!fp) {
  123. snd_printk(KERN_ERR "cannot memdup\n");
  124. return -ENOMEM;
  125. }
  126. if (fp->nr_rates > MAX_NR_RATES) {
  127. kfree(fp);
  128. return -EINVAL;
  129. }
  130. if (fp->nr_rates > 0) {
  131. rate_table = kmemdup(fp->rate_table,
  132. sizeof(int) * fp->nr_rates, GFP_KERNEL);
  133. if (!rate_table) {
  134. kfree(fp);
  135. return -ENOMEM;
  136. }
  137. fp->rate_table = rate_table;
  138. }
  139. stream = (fp->endpoint & USB_DIR_IN)
  140. ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
  141. err = snd_usb_add_audio_stream(chip, stream, fp);
  142. if (err < 0) {
  143. kfree(fp);
  144. kfree(rate_table);
  145. return err;
  146. }
  147. if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
  148. fp->altset_idx >= iface->num_altsetting) {
  149. kfree(fp);
  150. kfree(rate_table);
  151. return -EINVAL;
  152. }
  153. alts = &iface->altsetting[fp->altset_idx];
  154. fp->datainterval = snd_usb_parse_datainterval(chip, alts);
  155. fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
  156. usb_set_interface(chip->dev, fp->iface, 0);
  157. snd_usb_init_pitch(chip, fp->iface, alts, fp);
  158. snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max);
  159. return 0;
  160. }
  161. /*
  162. * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
  163. * The only way to detect the sample rate is by looking at wMaxPacketSize.
  164. */
  165. static int create_uaxx_quirk(struct snd_usb_audio *chip,
  166. struct usb_interface *iface,
  167. struct usb_driver *driver,
  168. const struct snd_usb_audio_quirk *quirk)
  169. {
  170. static const struct audioformat ua_format = {
  171. .formats = SNDRV_PCM_FMTBIT_S24_3LE,
  172. .channels = 2,
  173. .fmt_type = UAC_FORMAT_TYPE_I,
  174. .altsetting = 1,
  175. .altset_idx = 1,
  176. .rates = SNDRV_PCM_RATE_CONTINUOUS,
  177. };
  178. struct usb_host_interface *alts;
  179. struct usb_interface_descriptor *altsd;
  180. struct audioformat *fp;
  181. int stream, err;
  182. /* both PCM and MIDI interfaces have 2 or more altsettings */
  183. if (iface->num_altsetting < 2)
  184. return -ENXIO;
  185. alts = &iface->altsetting[1];
  186. altsd = get_iface_desc(alts);
  187. if (altsd->bNumEndpoints == 2) {
  188. static const struct snd_usb_midi_endpoint_info ua700_ep = {
  189. .out_cables = 0x0003,
  190. .in_cables = 0x0003
  191. };
  192. static const struct snd_usb_audio_quirk ua700_quirk = {
  193. .type = QUIRK_MIDI_FIXED_ENDPOINT,
  194. .data = &ua700_ep
  195. };
  196. static const struct snd_usb_midi_endpoint_info uaxx_ep = {
  197. .out_cables = 0x0001,
  198. .in_cables = 0x0001
  199. };
  200. static const struct snd_usb_audio_quirk uaxx_quirk = {
  201. .type = QUIRK_MIDI_FIXED_ENDPOINT,
  202. .data = &uaxx_ep
  203. };
  204. const struct snd_usb_audio_quirk *quirk =
  205. chip->usb_id == USB_ID(0x0582, 0x002b)
  206. ? &ua700_quirk : &uaxx_quirk;
  207. return snd_usbmidi_create(chip->card, iface,
  208. &chip->midi_list, quirk);
  209. }
  210. if (altsd->bNumEndpoints != 1)
  211. return -ENXIO;
  212. fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
  213. if (!fp)
  214. return -ENOMEM;
  215. fp->iface = altsd->bInterfaceNumber;
  216. fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
  217. fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
  218. fp->datainterval = 0;
  219. fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
  220. switch (fp->maxpacksize) {
  221. case 0x120:
  222. fp->rate_max = fp->rate_min = 44100;
  223. break;
  224. case 0x138:
  225. case 0x140:
  226. fp->rate_max = fp->rate_min = 48000;
  227. break;
  228. case 0x258:
  229. case 0x260:
  230. fp->rate_max = fp->rate_min = 96000;
  231. break;
  232. default:
  233. snd_printk(KERN_ERR "unknown sample rate\n");
  234. kfree(fp);
  235. return -ENXIO;
  236. }
  237. stream = (fp->endpoint & USB_DIR_IN)
  238. ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
  239. err = snd_usb_add_audio_stream(chip, stream, fp);
  240. if (err < 0) {
  241. kfree(fp);
  242. return err;
  243. }
  244. usb_set_interface(chip->dev, fp->iface, 0);
  245. return 0;
  246. }
  247. /*
  248. * Create a standard mixer for the specified interface.
  249. */
  250. static int create_standard_mixer_quirk(struct snd_usb_audio *chip,
  251. struct usb_interface *iface,
  252. struct usb_driver *driver,
  253. const struct snd_usb_audio_quirk *quirk)
  254. {
  255. if (quirk->ifnum < 0)
  256. return 0;
  257. return snd_usb_create_mixer(chip, quirk->ifnum, 0);
  258. }
  259. /*
  260. * audio-interface quirks
  261. *
  262. * returns zero if no standard audio/MIDI parsing is needed.
  263. * returns a positive value if standard audio/midi interfaces are parsed
  264. * after this.
  265. * returns a negative value at error.
  266. */
  267. int snd_usb_create_quirk(struct snd_usb_audio *chip,
  268. struct usb_interface *iface,
  269. struct usb_driver *driver,
  270. const struct snd_usb_audio_quirk *quirk)
  271. {
  272. typedef int (*quirk_func_t)(struct snd_usb_audio *,
  273. struct usb_interface *,
  274. struct usb_driver *,
  275. const struct snd_usb_audio_quirk *);
  276. static const quirk_func_t quirk_funcs[] = {
  277. [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
  278. [QUIRK_COMPOSITE] = create_composite_quirk,
  279. [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
  280. [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
  281. [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
  282. [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
  283. [QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
  284. [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
  285. [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
  286. [QUIRK_MIDI_CME] = create_any_midi_quirk,
  287. [QUIRK_MIDI_AKAI] = create_any_midi_quirk,
  288. [QUIRK_MIDI_FTDI] = create_any_midi_quirk,
  289. [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
  290. [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
  291. [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
  292. [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk,
  293. [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk,
  294. };
  295. if (quirk->type < QUIRK_TYPE_COUNT) {
  296. return quirk_funcs[quirk->type](chip, iface, driver, quirk);
  297. } else {
  298. snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
  299. return -ENXIO;
  300. }
  301. }
  302. /*
  303. * boot quirks
  304. */
  305. #define EXTIGY_FIRMWARE_SIZE_OLD 794
  306. #define EXTIGY_FIRMWARE_SIZE_NEW 483
  307. static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
  308. {
  309. struct usb_host_config *config = dev->actconfig;
  310. int err;
  311. if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
  312. le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
  313. snd_printdd("sending Extigy boot sequence...\n");
  314. /* Send message to force it to reconnect with full interface. */
  315. err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
  316. 0x10, 0x43, 0x0001, 0x000a, NULL, 0);
  317. if (err < 0) snd_printdd("error sending boot message: %d\n", err);
  318. err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
  319. &dev->descriptor, sizeof(dev->descriptor));
  320. config = dev->actconfig;
  321. if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
  322. err = usb_reset_configuration(dev);
  323. if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
  324. snd_printdd("extigy_boot: new boot length = %d\n",
  325. le16_to_cpu(get_cfg_desc(config)->wTotalLength));
  326. return -ENODEV; /* quit this anyway */
  327. }
  328. return 0;
  329. }
  330. static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
  331. {
  332. u8 buf = 1;
  333. snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
  334. USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
  335. 0, 0, &buf, 1);
  336. if (buf == 0) {
  337. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
  338. USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
  339. 1, 2000, NULL, 0);
  340. return -ENODEV;
  341. }
  342. return 0;
  343. }
  344. static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
  345. {
  346. int err;
  347. if (dev->actconfig->desc.bConfigurationValue == 1) {
  348. snd_printk(KERN_INFO "usb-audio: "
  349. "Fast Track Pro switching to config #2\n");
  350. /* This function has to be available by the usb core module.
  351. * if it is not avialable the boot quirk has to be left out
  352. * and the configuration has to be set by udev or hotplug
  353. * rules
  354. */
  355. err = usb_driver_set_configuration(dev, 2);
  356. if (err < 0)
  357. snd_printdd("error usb_driver_set_configuration: %d\n",
  358. err);
  359. /* Always return an error, so that we stop creating a device
  360. that will just be destroyed and recreated with a new
  361. configuration */
  362. return -ENODEV;
  363. } else
  364. snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
  365. return 0;
  366. }
  367. /*
  368. * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
  369. * documented in the device's data sheet.
  370. */
  371. static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
  372. {
  373. u8 buf[4];
  374. buf[0] = 0x20;
  375. buf[1] = value & 0xff;
  376. buf[2] = (value >> 8) & 0xff;
  377. buf[3] = reg;
  378. return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
  379. USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
  380. 0, 0, &buf, 4);
  381. }
  382. static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
  383. {
  384. /*
  385. * Enable line-out driver mode, set headphone source to front
  386. * channels, enable stereo mic.
  387. */
  388. return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
  389. }
  390. /*
  391. * C-Media CM6206 is based on CM106 with two additional
  392. * registers that are not documented in the data sheet.
  393. * Values here are chosen based on sniffing USB traffic
  394. * under Windows.
  395. */
  396. static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
  397. {
  398. int err = 0, reg;
  399. int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
  400. for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
  401. err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
  402. if (err < 0)
  403. return err;
  404. }
  405. return err;
  406. }
  407. /*
  408. * This call will put the synth in "USB send" mode, i.e it will send MIDI
  409. * messages through USB (this is disabled at startup). The synth will
  410. * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
  411. * sign on its LCD. Values here are chosen based on sniffing USB traffic
  412. * under Windows.
  413. */
  414. static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
  415. {
  416. int err, actual_length;
  417. /* "midi send" enable */
  418. static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
  419. void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
  420. if (!buf)
  421. return -ENOMEM;
  422. err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
  423. ARRAY_SIZE(seq), &actual_length, 1000);
  424. kfree(buf);
  425. if (err < 0)
  426. return err;
  427. return 0;
  428. }
  429. /*
  430. * Some sound cards from Native Instruments are in fact compliant to the USB
  431. * audio standard of version 2 and other approved USB standards, even though
  432. * they come up as vendor-specific device when first connected.
  433. *
  434. * However, they can be told to come up with a new set of descriptors
  435. * upon their next enumeration, and the interfaces announced by the new
  436. * descriptors will then be handled by the kernel's class drivers. As the
  437. * product ID will also change, no further checks are required.
  438. */
  439. static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
  440. {
  441. int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
  442. 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
  443. cpu_to_le16(1), 0, NULL, 0, 1000);
  444. if (ret < 0)
  445. return ret;
  446. usb_reset_device(dev);
  447. /* return -EAGAIN, so the creation of an audio interface for this
  448. * temporary device is aborted. The device will reconnect with a
  449. * new product ID */
  450. return -EAGAIN;
  451. }
  452. static void mbox2_setup_48_24_magic(struct usb_device *dev)
  453. {
  454. u8 srate[3];
  455. u8 temp[12];
  456. /* Choose 48000Hz permanently */
  457. srate[0] = 0x80;
  458. srate[1] = 0xbb;
  459. srate[2] = 0x00;
  460. /* Send the magic! */
  461. snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
  462. 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
  463. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
  464. 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
  465. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
  466. 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
  467. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
  468. 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
  469. return;
  470. }
  471. /* Digidesign Mbox 2 needs to load firmware onboard
  472. * and driver must wait a few seconds for initialisation.
  473. */
  474. #define MBOX2_FIRMWARE_SIZE 646
  475. #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
  476. #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
  477. static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
  478. {
  479. struct usb_host_config *config = dev->actconfig;
  480. int err;
  481. u8 bootresponse[0x12];
  482. int fwsize;
  483. int count;
  484. fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
  485. if (fwsize != MBOX2_FIRMWARE_SIZE) {
  486. snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
  487. return -ENODEV;
  488. }
  489. snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
  490. count = 0;
  491. bootresponse[0] = MBOX2_BOOT_LOADING;
  492. while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) {
  493. msleep(500); /* 0.5 second delay */
  494. snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
  495. /* Control magic - load onboard firmware */
  496. 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
  497. if (bootresponse[0] == MBOX2_BOOT_READY)
  498. break;
  499. snd_printd("usb-audio: device not ready, resending boot sequence...\n");
  500. count++;
  501. }
  502. if (bootresponse[0] != MBOX2_BOOT_READY) {
  503. snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
  504. return -ENODEV;
  505. }
  506. snd_printdd("usb-audio: device initialised!\n");
  507. err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
  508. &dev->descriptor, sizeof(dev->descriptor));
  509. config = dev->actconfig;
  510. if (err < 0)
  511. snd_printd("error usb_get_descriptor: %d\n", err);
  512. err = usb_reset_configuration(dev);
  513. if (err < 0)
  514. snd_printd("error usb_reset_configuration: %d\n", err);
  515. snd_printdd("mbox2_boot: new boot length = %d\n",
  516. le16_to_cpu(get_cfg_desc(config)->wTotalLength));
  517. mbox2_setup_48_24_magic(dev);
  518. snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
  519. return 0; /* Successful boot */
  520. }
  521. /*
  522. * Setup quirks
  523. */
  524. #define MAUDIO_SET 0x01 /* parse device_setup */
  525. #define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */
  526. #define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */
  527. #define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */
  528. #define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */
  529. #define MAUDIO_SET_DI 0x10 /* enable Digital Input */
  530. #define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */
  531. #define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */
  532. #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */
  533. #define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */
  534. #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */
  535. static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
  536. int iface, int altno)
  537. {
  538. /* Reset ALL ifaces to 0 altsetting.
  539. * Call it for every possible altsetting of every interface.
  540. */
  541. usb_set_interface(chip->dev, iface, 0);
  542. if (chip->setup & MAUDIO_SET) {
  543. if (chip->setup & MAUDIO_SET_COMPATIBLE) {
  544. if (iface != 1 && iface != 2)
  545. return 1; /* skip all interfaces but 1 and 2 */
  546. } else {
  547. unsigned int mask;
  548. if (iface == 1 || iface == 2)
  549. return 1; /* skip interfaces 1 and 2 */
  550. if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
  551. return 1; /* skip this altsetting */
  552. mask = chip->setup & MAUDIO_SET_MASK;
  553. if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
  554. return 1; /* skip this altsetting */
  555. if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
  556. return 1; /* skip this altsetting */
  557. if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4)
  558. return 1; /* skip this altsetting */
  559. }
  560. }
  561. snd_printdd(KERN_INFO
  562. "using altsetting %d for interface %d config %d\n",
  563. altno, iface, chip->setup);
  564. return 0; /* keep this altsetting */
  565. }
  566. static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
  567. int iface,
  568. int altno)
  569. {
  570. /* Reset ALL ifaces to 0 altsetting.
  571. * Call it for every possible altsetting of every interface.
  572. */
  573. usb_set_interface(chip->dev, iface, 0);
  574. if (chip->setup & MAUDIO_SET) {
  575. unsigned int mask;
  576. if ((chip->setup & MAUDIO_SET_DTS) && altno != 6)
  577. return 1; /* skip this altsetting */
  578. if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
  579. return 1; /* skip this altsetting */
  580. mask = chip->setup & MAUDIO_SET_MASK;
  581. if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
  582. return 1; /* skip this altsetting */
  583. if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
  584. return 1; /* skip this altsetting */
  585. if (mask == MAUDIO_SET_16B_48K_DI && altno != 4)
  586. return 1; /* skip this altsetting */
  587. if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5)
  588. return 1; /* skip this altsetting */
  589. }
  590. return 0; /* keep this altsetting */
  591. }
  592. static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
  593. int iface, int altno)
  594. {
  595. /* Reset ALL ifaces to 0 altsetting.
  596. * Call it for every possible altsetting of every interface.
  597. */
  598. usb_set_interface(chip->dev, iface, 0);
  599. /* possible configuration where both inputs and only one output is
  600. *used is not supported by the current setup
  601. */
  602. if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) {
  603. if (chip->setup & MAUDIO_SET_96K) {
  604. if (altno != 3 && altno != 6)
  605. return 1;
  606. } else if (chip->setup & MAUDIO_SET_DI) {
  607. if (iface == 4)
  608. return 1; /* no analog input */
  609. if (altno != 2 && altno != 5)
  610. return 1; /* enable only altsets 2 and 5 */
  611. } else {
  612. if (iface == 5)
  613. return 1; /* disable digialt input */
  614. if (altno != 2 && altno != 5)
  615. return 1; /* enalbe only altsets 2 and 5 */
  616. }
  617. } else {
  618. /* keep only 16-Bit mode */
  619. if (altno != 1)
  620. return 1;
  621. }
  622. snd_printdd(KERN_INFO
  623. "using altsetting %d for interface %d config %d\n",
  624. altno, iface, chip->setup);
  625. return 0; /* keep this altsetting */
  626. }
  627. int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
  628. int iface,
  629. int altno)
  630. {
  631. /* audiophile usb: skip altsets incompatible with device_setup */
  632. if (chip->usb_id == USB_ID(0x0763, 0x2003))
  633. return audiophile_skip_setting_quirk(chip, iface, altno);
  634. /* quattro usb: skip altsets incompatible with device_setup */
  635. if (chip->usb_id == USB_ID(0x0763, 0x2001))
  636. return quattro_skip_setting_quirk(chip, iface, altno);
  637. /* fasttrackpro usb: skip altsets incompatible with device_setup */
  638. if (chip->usb_id == USB_ID(0x0763, 0x2012))
  639. return fasttrackpro_skip_setting_quirk(chip, iface, altno);
  640. return 0;
  641. }
  642. int snd_usb_apply_boot_quirk(struct usb_device *dev,
  643. struct usb_interface *intf,
  644. const struct snd_usb_audio_quirk *quirk)
  645. {
  646. u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
  647. le16_to_cpu(dev->descriptor.idProduct));
  648. switch (id) {
  649. case USB_ID(0x041e, 0x3000):
  650. /* SB Extigy needs special boot-up sequence */
  651. /* if more models come, this will go to the quirk list. */
  652. return snd_usb_extigy_boot_quirk(dev, intf);
  653. case USB_ID(0x041e, 0x3020):
  654. /* SB Audigy 2 NX needs its own boot-up magic, too */
  655. return snd_usb_audigy2nx_boot_quirk(dev);
  656. case USB_ID(0x10f5, 0x0200):
  657. /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
  658. return snd_usb_cm106_boot_quirk(dev);
  659. case USB_ID(0x0d8c, 0x0102):
  660. /* C-Media CM6206 / CM106-Like Sound Device */
  661. case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
  662. return snd_usb_cm6206_boot_quirk(dev);
  663. case USB_ID(0x0dba, 0x3000):
  664. /* Digidesign Mbox 2 */
  665. return snd_usb_mbox2_boot_quirk(dev);
  666. case USB_ID(0x133e, 0x0815):
  667. /* Access Music VirusTI Desktop */
  668. return snd_usb_accessmusic_boot_quirk(dev);
  669. case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
  670. case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
  671. case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
  672. return snd_usb_nativeinstruments_boot_quirk(dev);
  673. case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
  674. return snd_usb_fasttrackpro_boot_quirk(dev);
  675. }
  676. return 0;
  677. }
  678. /*
  679. * check if the device uses big-endian samples
  680. */
  681. int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
  682. {
  683. /* it depends on altsetting whether the device is big-endian or not */
  684. switch (chip->usb_id) {
  685. case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
  686. if (fp->altsetting == 2 || fp->altsetting == 3 ||
  687. fp->altsetting == 5 || fp->altsetting == 6)
  688. return 1;
  689. break;
  690. case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
  691. if (chip->setup == 0x00 ||
  692. fp->altsetting == 1 || fp->altsetting == 2 ||
  693. fp->altsetting == 3)
  694. return 1;
  695. break;
  696. case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */
  697. if (fp->altsetting == 2 || fp->altsetting == 3 ||
  698. fp->altsetting == 5 || fp->altsetting == 6)
  699. return 1;
  700. break;
  701. }
  702. return 0;
  703. }
  704. /*
  705. * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
  706. * not for interface.
  707. */
  708. enum {
  709. EMU_QUIRK_SR_44100HZ = 0,
  710. EMU_QUIRK_SR_48000HZ,
  711. EMU_QUIRK_SR_88200HZ,
  712. EMU_QUIRK_SR_96000HZ,
  713. EMU_QUIRK_SR_176400HZ,
  714. EMU_QUIRK_SR_192000HZ
  715. };
  716. static void set_format_emu_quirk(struct snd_usb_substream *subs,
  717. struct audioformat *fmt)
  718. {
  719. unsigned char emu_samplerate_id = 0;
  720. /* When capture is active
  721. * sample rate shouldn't be changed
  722. * by playback substream
  723. */
  724. if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
  725. if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1)
  726. return;
  727. }
  728. switch (fmt->rate_min) {
  729. case 48000:
  730. emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
  731. break;
  732. case 88200:
  733. emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
  734. break;
  735. case 96000:
  736. emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
  737. break;
  738. case 176400:
  739. emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
  740. break;
  741. case 192000:
  742. emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
  743. break;
  744. default:
  745. emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
  746. break;
  747. }
  748. snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
  749. }
  750. void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
  751. struct audioformat *fmt)
  752. {
  753. switch (subs->stream->chip->usb_id) {
  754. case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
  755. case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
  756. case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
  757. case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
  758. set_format_emu_quirk(subs, fmt);
  759. break;
  760. }
  761. }
  762. void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
  763. {
  764. /*
  765. * "Playback Design" products send bogus feedback data at the start
  766. * of the stream. Ignore them.
  767. */
  768. if ((le16_to_cpu(ep->chip->dev->descriptor.idVendor) == 0x23ba) &&
  769. ep->type == SND_USB_ENDPOINT_TYPE_SYNC)
  770. ep->skip_packets = 4;
  771. /*
  772. * M-Audio Fast Track C400/C600 - when packets are not skipped, real
  773. * world latency varies by approx. +/- 50 frames (at 96KHz) each time
  774. * the stream is (re)started. When skipping packets 16 at endpoint
  775. * start up, the real world latency is stable within +/- 1 frame (also
  776. * across power cycles).
  777. */
  778. if ((ep->chip->usb_id == USB_ID(0x0763, 0x2030) ||
  779. ep->chip->usb_id == USB_ID(0x0763, 0x2031)) &&
  780. ep->type == SND_USB_ENDPOINT_TYPE_DATA)
  781. ep->skip_packets = 16;
  782. }
  783. void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
  784. __u8 request, __u8 requesttype, __u16 value,
  785. __u16 index, void *data, __u16 size)
  786. {
  787. /*
  788. * "Playback Design" products need a 20ms delay after each
  789. * class compliant request
  790. */
  791. if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) &&
  792. (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
  793. mdelay(20);
  794. }