fw-api-rs.h 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312
  1. /******************************************************************************
  2. *
  3. * This file is provided under a dual BSD/GPLv2 license. When using or
  4. * redistributing this file, you may do so under either license.
  5. *
  6. * GPL LICENSE SUMMARY
  7. *
  8. * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
  9. *
  10. * This program is free software; you can redistribute it and/or modify
  11. * it under the terms of version 2 of the GNU General Public License as
  12. * published by the Free Software Foundation.
  13. *
  14. * This program is distributed in the hope that it will be useful, but
  15. * WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  17. * General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  22. * USA
  23. *
  24. * The full GNU General Public License is included in this distribution
  25. * in the file called LICENSE.GPL.
  26. *
  27. * Contact Information:
  28. * Intel Linux Wireless <ilw@linux.intel.com>
  29. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  30. *
  31. * BSD LICENSE
  32. *
  33. * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
  34. * All rights reserved.
  35. *
  36. * Redistribution and use in source and binary forms, with or without
  37. * modification, are permitted provided that the following conditions
  38. * are met:
  39. *
  40. * * Redistributions of source code must retain the above copyright
  41. * notice, this list of conditions and the following disclaimer.
  42. * * Redistributions in binary form must reproduce the above copyright
  43. * notice, this list of conditions and the following disclaimer in
  44. * the documentation and/or other materials provided with the
  45. * distribution.
  46. * * Neither the name Intel Corporation nor the names of its
  47. * contributors may be used to endorse or promote products derived
  48. * from this software without specific prior written permission.
  49. *
  50. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  51. * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  52. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  53. * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  54. * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  55. * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  56. * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  57. * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  58. * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  59. * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  60. * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  61. *****************************************************************************/
  62. #ifndef __fw_api_rs_h__
  63. #define __fw_api_rs_h__
  64. #include "fw-api-mac.h"
  65. /*
  66. * These serve as indexes into
  67. * struct iwl_rate_info fw_rate_idx_to_plcp[IWL_RATE_COUNT];
  68. */
  69. enum {
  70. IWL_RATE_1M_INDEX = 0,
  71. IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
  72. IWL_RATE_2M_INDEX,
  73. IWL_RATE_5M_INDEX,
  74. IWL_RATE_11M_INDEX,
  75. IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
  76. IWL_RATE_6M_INDEX,
  77. IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
  78. IWL_RATE_9M_INDEX,
  79. IWL_RATE_12M_INDEX,
  80. IWL_RATE_18M_INDEX,
  81. IWL_RATE_24M_INDEX,
  82. IWL_RATE_36M_INDEX,
  83. IWL_RATE_48M_INDEX,
  84. IWL_RATE_54M_INDEX,
  85. IWL_LAST_NON_HT_RATE = IWL_RATE_54M_INDEX,
  86. IWL_RATE_60M_INDEX,
  87. IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
  88. IWL_RATE_COUNT_LEGACY = IWL_LAST_NON_HT_RATE + 1,
  89. IWL_RATE_COUNT,
  90. };
  91. #define IWL_RATE_BIT_MSK(r) BIT(IWL_RATE_##r##M_INDEX)
  92. /* fw API values for legacy bit rates, both OFDM and CCK */
  93. enum {
  94. IWL_RATE_6M_PLCP = 13,
  95. IWL_RATE_9M_PLCP = 15,
  96. IWL_RATE_12M_PLCP = 5,
  97. IWL_RATE_18M_PLCP = 7,
  98. IWL_RATE_24M_PLCP = 9,
  99. IWL_RATE_36M_PLCP = 11,
  100. IWL_RATE_48M_PLCP = 1,
  101. IWL_RATE_54M_PLCP = 3,
  102. IWL_RATE_1M_PLCP = 10,
  103. IWL_RATE_2M_PLCP = 20,
  104. IWL_RATE_5M_PLCP = 55,
  105. IWL_RATE_11M_PLCP = 110,
  106. };
  107. /*
  108. * rate_n_flags bit fields
  109. *
  110. * The 32-bit value has different layouts in the low 8 bites depending on the
  111. * format. There are three formats, HT, VHT and legacy (11abg, with subformats
  112. * for CCK and OFDM).
  113. *
  114. * High-throughput (HT) rate format
  115. * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM)
  116. * Very High-throughput (VHT) rate format
  117. * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM)
  118. * Legacy OFDM rate format for bits 7:0
  119. * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM)
  120. * Legacy CCK rate format for bits 7:0:
  121. * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK)
  122. */
  123. /* Bit 8: (1) HT format, (0) legacy or VHT format */
  124. #define RATE_MCS_HT_POS 8
  125. #define RATE_MCS_HT_MSK (1 << RATE_MCS_HT_POS)
  126. /* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
  127. #define RATE_MCS_CCK_POS 9
  128. #define RATE_MCS_CCK_MSK (1 << RATE_MCS_CCK_POS)
  129. /* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */
  130. #define RATE_MCS_VHT_POS 26
  131. #define RATE_MCS_VHT_MSK (1 << RATE_MCS_VHT_POS)
  132. /*
  133. * High-throughput (HT) rate format for bits 7:0
  134. *
  135. * 2-0: MCS rate base
  136. * 0) 6 Mbps
  137. * 1) 12 Mbps
  138. * 2) 18 Mbps
  139. * 3) 24 Mbps
  140. * 4) 36 Mbps
  141. * 5) 48 Mbps
  142. * 6) 54 Mbps
  143. * 7) 60 Mbps
  144. * 4-3: 0) Single stream (SISO)
  145. * 1) Dual stream (MIMO)
  146. * 2) Triple stream (MIMO)
  147. * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
  148. * (bits 7-6 are zero)
  149. *
  150. * Together the low 5 bits work out to the MCS index because we don't
  151. * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two
  152. * streams and 16-23 have three streams. We could also support MCS 32
  153. * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.)
  154. */
  155. #define RATE_HT_MCS_RATE_CODE_MSK 0x7
  156. /* Bit 10: (1) Use Green Field preamble */
  157. #define RATE_HT_MCS_GF_POS 10
  158. #define RATE_HT_MCS_GF_MSK (1 << RATE_HT_MCS_GF_POS)
  159. #define RATE_HT_MCS_INDEX_MSK 0x3f
  160. /*
  161. * Very High-throughput (VHT) rate format for bits 7:0
  162. *
  163. * 3-0: VHT MCS (0-9)
  164. * 5-4: number of streams - 1:
  165. * 0) Single stream (SISO)
  166. * 1) Dual stream (MIMO)
  167. * 2) Triple stream (MIMO)
  168. */
  169. /* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */
  170. #define RATE_VHT_MCS_RATE_CODE_MSK 0xf
  171. #define RATE_VHT_MCS_NSS_POS 4
  172. #define RATE_VHT_MCS_NSS_MSK (3 << RATE_VHT_MCS_NSS_POS)
  173. /*
  174. * Legacy OFDM rate format for bits 7:0
  175. *
  176. * 3-0: 0xD) 6 Mbps
  177. * 0xF) 9 Mbps
  178. * 0x5) 12 Mbps
  179. * 0x7) 18 Mbps
  180. * 0x9) 24 Mbps
  181. * 0xB) 36 Mbps
  182. * 0x1) 48 Mbps
  183. * 0x3) 54 Mbps
  184. * (bits 7-4 are 0)
  185. *
  186. * Legacy CCK rate format for bits 7:0:
  187. * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK):
  188. *
  189. * 6-0: 10) 1 Mbps
  190. * 20) 2 Mbps
  191. * 55) 5.5 Mbps
  192. * 110) 11 Mbps
  193. * (bit 7 is 0)
  194. */
  195. #define RATE_LEGACY_RATE_MSK 0xff
  196. /*
  197. * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz
  198. * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT
  199. */
  200. #define RATE_MCS_CHAN_WIDTH_POS 11
  201. #define RATE_MCS_CHAN_WIDTH_MSK (3 << RATE_MCS_CHAN_WIDTH_POS)
  202. #define RATE_MCS_CHAN_WIDTH_20 (0 << RATE_MCS_CHAN_WIDTH_POS)
  203. #define RATE_MCS_CHAN_WIDTH_40 (1 << RATE_MCS_CHAN_WIDTH_POS)
  204. #define RATE_MCS_CHAN_WIDTH_80 (2 << RATE_MCS_CHAN_WIDTH_POS)
  205. #define RATE_MCS_CHAN_WIDTH_160 (3 << RATE_MCS_CHAN_WIDTH_POS)
  206. /* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
  207. #define RATE_MCS_SGI_POS 13
  208. #define RATE_MCS_SGI_MSK (1 << RATE_MCS_SGI_POS)
  209. /* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */
  210. #define RATE_MCS_ANT_POS 14
  211. #define RATE_MCS_ANT_A_MSK (1 << RATE_MCS_ANT_POS)
  212. #define RATE_MCS_ANT_B_MSK (2 << RATE_MCS_ANT_POS)
  213. #define RATE_MCS_ANT_C_MSK (4 << RATE_MCS_ANT_POS)
  214. #define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | \
  215. RATE_MCS_ANT_B_MSK)
  216. #define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | \
  217. RATE_MCS_ANT_C_MSK)
  218. #define RATE_MCS_ANT_MSK RATE_MCS_ANT_ABC_MSK
  219. #define RATE_MCS_ANT_NUM 3
  220. /* Bit 17-18: (0) SS, (1) SS*2 */
  221. #define RATE_MCS_STBC_POS 17
  222. #define RATE_MCS_STBC_MSK (1 << RATE_MCS_STBC_POS)
  223. /* Bit 19: (0) Beamforming is off, (1) Beamforming is on */
  224. #define RATE_MCS_BF_POS 19
  225. #define RATE_MCS_BF_MSK (1 << RATE_MCS_BF_POS)
  226. /* Bit 20: (0) ZLF is off, (1) ZLF is on */
  227. #define RATE_MCS_ZLF_POS 20
  228. #define RATE_MCS_ZLF_MSK (1 << RATE_MCS_ZLF_POS)
  229. /* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */
  230. #define RATE_MCS_DUP_POS 24
  231. #define RATE_MCS_DUP_MSK (3 << RATE_MCS_DUP_POS)
  232. /* Bit 27: (1) LDPC enabled, (0) LDPC disabled */
  233. #define RATE_MCS_LDPC_POS 27
  234. #define RATE_MCS_LDPC_MSK (1 << RATE_MCS_LDPC_POS)
  235. /* Link Quality definitions */
  236. /* # entries in rate scale table to support Tx retries */
  237. #define LQ_MAX_RETRY_NUM 16
  238. /* Link quality command flags, only this one is available */
  239. #define LQ_FLAG_SET_STA_TLC_RTS_MSK BIT(0)
  240. /**
  241. * struct iwl_lq_cmd - link quality command
  242. * @sta_id: station to update
  243. * @control: not used
  244. * @flags: combination of LQ_FLAG_*
  245. * @mimo_delim: the first SISO index in rs_table, which separates MIMO
  246. * and SISO rates
  247. * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD).
  248. * Should be ANT_[ABC]
  249. * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC]
  250. * @initial_rate_index: first index from rs_table per AC category
  251. * @agg_time_limit: aggregation max time threshold in usec/100, meaning
  252. * value of 100 is one usec. Range is 100 to 8000
  253. * @agg_disable_start_th: try-count threshold for starting aggregation.
  254. * If a frame has higher try-count, it should not be selected for
  255. * starting an aggregation sequence.
  256. * @agg_frame_cnt_limit: max frame count in an aggregation.
  257. * 0: no limit
  258. * 1: no aggregation (one frame per aggregation)
  259. * 2 - 0x3f: maximal number of frames (up to 3f == 63)
  260. * @rs_table: array of rates for each TX try, each is rate_n_flags,
  261. * meaning it is a combination of RATE_MCS_* and IWL_RATE_*_PLCP
  262. * @bf_params: beam forming params, currently not used
  263. */
  264. struct iwl_lq_cmd {
  265. u8 sta_id;
  266. u8 reserved1;
  267. u16 control;
  268. /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */
  269. u8 flags;
  270. u8 mimo_delim;
  271. u8 single_stream_ant_msk;
  272. u8 dual_stream_ant_msk;
  273. u8 initial_rate_index[AC_NUM];
  274. /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */
  275. __le16 agg_time_limit;
  276. u8 agg_disable_start_th;
  277. u8 agg_frame_cnt_limit;
  278. __le32 reserved2;
  279. __le32 rs_table[LQ_MAX_RETRY_NUM];
  280. __le32 bf_params;
  281. }; /* LINK_QUALITY_CMD_API_S_VER_1 */
  282. #endif /* __fw_api_rs_h__ */