ahci_platform.c 8.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350
  1. /*
  2. * AHCI SATA platform driver
  3. *
  4. * Copyright 2004-2005 Red Hat, Inc.
  5. * Jeff Garzik <jgarzik@pobox.com>
  6. * Copyright 2010 MontaVista Software, LLC.
  7. * Anton Vorontsov <avorontsov@ru.mvista.com>
  8. *
  9. * This program is free software; you can redistribute it and/or modify
  10. * it under the terms of the GNU General Public License as published by
  11. * the Free Software Foundation; either version 2, or (at your option)
  12. * any later version.
  13. */
  14. #include <linux/clk.h>
  15. #include <linux/kernel.h>
  16. #include <linux/gfp.h>
  17. #include <linux/module.h>
  18. #include <linux/pm.h>
  19. #include <linux/init.h>
  20. #include <linux/interrupt.h>
  21. #include <linux/device.h>
  22. #include <linux/platform_device.h>
  23. #include <linux/libata.h>
  24. #include <linux/ahci_platform.h>
  25. #include "ahci.h"
  26. static void ahci_host_stop(struct ata_host *host);
  27. enum ahci_type {
  28. AHCI, /* standard platform ahci */
  29. IMX53_AHCI, /* ahci on i.mx53 */
  30. STRICT_AHCI, /* delayed DMA engine start */
  31. };
  32. static struct platform_device_id ahci_devtype[] = {
  33. {
  34. .name = "ahci",
  35. .driver_data = AHCI,
  36. }, {
  37. .name = "imx53-ahci",
  38. .driver_data = IMX53_AHCI,
  39. }, {
  40. .name = "strict-ahci",
  41. .driver_data = STRICT_AHCI,
  42. }, {
  43. /* sentinel */
  44. }
  45. };
  46. MODULE_DEVICE_TABLE(platform, ahci_devtype);
  47. static struct ata_port_operations ahci_platform_ops = {
  48. .inherits = &ahci_ops,
  49. .host_stop = ahci_host_stop,
  50. };
  51. static struct ata_port_operations ahci_platform_retry_srst_ops = {
  52. .inherits = &ahci_pmp_retry_srst_ops,
  53. .host_stop = ahci_host_stop,
  54. };
  55. static const struct ata_port_info ahci_port_info[] = {
  56. /* by features */
  57. [AHCI] = {
  58. .flags = AHCI_FLAG_COMMON,
  59. .pio_mask = ATA_PIO4,
  60. .udma_mask = ATA_UDMA6,
  61. .port_ops = &ahci_platform_ops,
  62. },
  63. [IMX53_AHCI] = {
  64. .flags = AHCI_FLAG_COMMON,
  65. .pio_mask = ATA_PIO4,
  66. .udma_mask = ATA_UDMA6,
  67. .port_ops = &ahci_platform_retry_srst_ops,
  68. },
  69. [STRICT_AHCI] = {
  70. AHCI_HFLAGS (AHCI_HFLAG_DELAY_ENGINE),
  71. .flags = AHCI_FLAG_COMMON,
  72. .pio_mask = ATA_PIO4,
  73. .udma_mask = ATA_UDMA6,
  74. .port_ops = &ahci_platform_ops,
  75. },
  76. };
  77. static struct scsi_host_template ahci_platform_sht = {
  78. AHCI_SHT("ahci_platform"),
  79. };
  80. static int ahci_probe(struct platform_device *pdev)
  81. {
  82. struct device *dev = &pdev->dev;
  83. struct ahci_platform_data *pdata = dev_get_platdata(dev);
  84. const struct platform_device_id *id = platform_get_device_id(pdev);
  85. struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
  86. const struct ata_port_info *ppi[] = { &pi, NULL };
  87. struct ahci_host_priv *hpriv;
  88. struct ata_host *host;
  89. struct resource *mem;
  90. int irq;
  91. int n_ports;
  92. int i;
  93. int rc;
  94. mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  95. if (!mem) {
  96. dev_err(dev, "no mmio space\n");
  97. return -EINVAL;
  98. }
  99. irq = platform_get_irq(pdev, 0);
  100. if (irq <= 0) {
  101. dev_err(dev, "no irq\n");
  102. return -EINVAL;
  103. }
  104. if (pdata && pdata->ata_port_info)
  105. pi = *pdata->ata_port_info;
  106. hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
  107. if (!hpriv) {
  108. dev_err(dev, "can't alloc ahci_host_priv\n");
  109. return -ENOMEM;
  110. }
  111. hpriv->flags |= (unsigned long)pi.private_data;
  112. hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
  113. if (!hpriv->mmio) {
  114. dev_err(dev, "can't map %pR\n", mem);
  115. return -ENOMEM;
  116. }
  117. hpriv->clk = clk_get(dev, NULL);
  118. if (IS_ERR(hpriv->clk)) {
  119. dev_err(dev, "can't get clock\n");
  120. } else {
  121. rc = clk_prepare_enable(hpriv->clk);
  122. if (rc) {
  123. dev_err(dev, "clock prepare enable failed");
  124. goto free_clk;
  125. }
  126. }
  127. /*
  128. * Some platforms might need to prepare for mmio region access,
  129. * which could be done in the following init call. So, the mmio
  130. * region shouldn't be accessed before init (if provided) has
  131. * returned successfully.
  132. */
  133. if (pdata && pdata->init) {
  134. rc = pdata->init(dev, hpriv->mmio);
  135. if (rc)
  136. goto disable_unprepare_clk;
  137. }
  138. ahci_save_initial_config(dev, hpriv,
  139. pdata ? pdata->force_port_map : 0,
  140. pdata ? pdata->mask_port_map : 0);
  141. /* prepare host */
  142. if (hpriv->cap & HOST_CAP_NCQ)
  143. pi.flags |= ATA_FLAG_NCQ;
  144. if (hpriv->cap & HOST_CAP_PMP)
  145. pi.flags |= ATA_FLAG_PMP;
  146. ahci_set_em_messages(hpriv, &pi);
  147. /* CAP.NP sometimes indicate the index of the last enabled
  148. * port, at other times, that of the last possible port, so
  149. * determining the maximum port number requires looking at
  150. * both CAP.NP and port_map.
  151. */
  152. n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
  153. host = ata_host_alloc_pinfo(dev, ppi, n_ports);
  154. if (!host) {
  155. rc = -ENOMEM;
  156. goto pdata_exit;
  157. }
  158. host->private_data = hpriv;
  159. if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
  160. host->flags |= ATA_HOST_PARALLEL_SCAN;
  161. else
  162. printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
  163. if (pi.flags & ATA_FLAG_EM)
  164. ahci_reset_em(host);
  165. for (i = 0; i < host->n_ports; i++) {
  166. struct ata_port *ap = host->ports[i];
  167. ata_port_desc(ap, "mmio %pR", mem);
  168. ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
  169. /* set enclosure management message type */
  170. if (ap->flags & ATA_FLAG_EM)
  171. ap->em_message_type = hpriv->em_msg_type;
  172. /* disabled/not-implemented port */
  173. if (!(hpriv->port_map & (1 << i)))
  174. ap->ops = &ata_dummy_port_ops;
  175. }
  176. rc = ahci_reset_controller(host);
  177. if (rc)
  178. goto pdata_exit;
  179. ahci_init_controller(host);
  180. ahci_print_info(host, "platform");
  181. rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
  182. &ahci_platform_sht);
  183. if (rc)
  184. goto pdata_exit;
  185. return 0;
  186. pdata_exit:
  187. if (pdata && pdata->exit)
  188. pdata->exit(dev);
  189. disable_unprepare_clk:
  190. if (!IS_ERR(hpriv->clk))
  191. clk_disable_unprepare(hpriv->clk);
  192. free_clk:
  193. if (!IS_ERR(hpriv->clk))
  194. clk_put(hpriv->clk);
  195. return rc;
  196. }
  197. static void ahci_host_stop(struct ata_host *host)
  198. {
  199. struct device *dev = host->dev;
  200. struct ahci_platform_data *pdata = dev_get_platdata(dev);
  201. struct ahci_host_priv *hpriv = host->private_data;
  202. if (pdata && pdata->exit)
  203. pdata->exit(dev);
  204. if (!IS_ERR(hpriv->clk)) {
  205. clk_disable_unprepare(hpriv->clk);
  206. clk_put(hpriv->clk);
  207. }
  208. }
  209. #ifdef CONFIG_PM_SLEEP
  210. static int ahci_suspend(struct device *dev)
  211. {
  212. struct ahci_platform_data *pdata = dev_get_platdata(dev);
  213. struct ata_host *host = dev_get_drvdata(dev);
  214. struct ahci_host_priv *hpriv = host->private_data;
  215. void __iomem *mmio = hpriv->mmio;
  216. u32 ctl;
  217. int rc;
  218. if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
  219. dev_err(dev, "firmware update required for suspend/resume\n");
  220. return -EIO;
  221. }
  222. /*
  223. * AHCI spec rev1.1 section 8.3.3:
  224. * Software must disable interrupts prior to requesting a
  225. * transition of the HBA to D3 state.
  226. */
  227. ctl = readl(mmio + HOST_CTL);
  228. ctl &= ~HOST_IRQ_EN;
  229. writel(ctl, mmio + HOST_CTL);
  230. readl(mmio + HOST_CTL); /* flush */
  231. rc = ata_host_suspend(host, PMSG_SUSPEND);
  232. if (rc)
  233. return rc;
  234. if (pdata && pdata->suspend)
  235. return pdata->suspend(dev);
  236. if (!IS_ERR(hpriv->clk))
  237. clk_disable_unprepare(hpriv->clk);
  238. return 0;
  239. }
  240. static int ahci_resume(struct device *dev)
  241. {
  242. struct ahci_platform_data *pdata = dev_get_platdata(dev);
  243. struct ata_host *host = dev_get_drvdata(dev);
  244. struct ahci_host_priv *hpriv = host->private_data;
  245. int rc;
  246. if (!IS_ERR(hpriv->clk)) {
  247. rc = clk_prepare_enable(hpriv->clk);
  248. if (rc) {
  249. dev_err(dev, "clock prepare enable failed");
  250. return rc;
  251. }
  252. }
  253. if (pdata && pdata->resume) {
  254. rc = pdata->resume(dev);
  255. if (rc)
  256. goto disable_unprepare_clk;
  257. }
  258. if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
  259. rc = ahci_reset_controller(host);
  260. if (rc)
  261. goto disable_unprepare_clk;
  262. ahci_init_controller(host);
  263. }
  264. ata_host_resume(host);
  265. return 0;
  266. disable_unprepare_clk:
  267. if (!IS_ERR(hpriv->clk))
  268. clk_disable_unprepare(hpriv->clk);
  269. return rc;
  270. }
  271. #endif
  272. static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
  273. static const struct of_device_id ahci_of_match[] = {
  274. { .compatible = "snps,spear-ahci", },
  275. {},
  276. };
  277. MODULE_DEVICE_TABLE(of, ahci_of_match);
  278. static struct platform_driver ahci_driver = {
  279. .probe = ahci_probe,
  280. .remove = ata_platform_remove_one,
  281. .driver = {
  282. .name = "ahci",
  283. .owner = THIS_MODULE,
  284. .of_match_table = ahci_of_match,
  285. .pm = &ahci_pm_ops,
  286. },
  287. .id_table = ahci_devtype,
  288. };
  289. module_platform_driver(ahci_driver);
  290. MODULE_DESCRIPTION("AHCI SATA platform driver");
  291. MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
  292. MODULE_LICENSE("GPL");
  293. MODULE_ALIAS("platform:ahci");