time.c 4.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150
  1. /* time.c: FRV arch-specific time handling
  2. *
  3. * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
  4. * Written by David Howells (dhowells@redhat.com)
  5. * - Derived from arch/m68k/kernel/time.c
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License
  9. * as published by the Free Software Foundation; either version
  10. * 2 of the License, or (at your option) any later version.
  11. */
  12. #include <linux/config.h> /* CONFIG_HEARTBEAT */
  13. #include <linux/module.h>
  14. #include <linux/errno.h>
  15. #include <linux/sched.h>
  16. #include <linux/kernel.h>
  17. #include <linux/param.h>
  18. #include <linux/string.h>
  19. #include <linux/interrupt.h>
  20. #include <linux/profile.h>
  21. #include <linux/irq.h>
  22. #include <linux/mm.h>
  23. #include <asm/io.h>
  24. #include <asm/timer-regs.h>
  25. #include <asm/mb-regs.h>
  26. #include <asm/mb86943a.h>
  27. #include <linux/timex.h>
  28. #define TICK_SIZE (tick_nsec / 1000)
  29. unsigned long __nongprelbss __clkin_clock_speed_HZ;
  30. unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
  31. unsigned long __nongprelbss __res_bus_clock_speed_HZ;
  32. unsigned long __nongprelbss __sdram_clock_speed_HZ;
  33. unsigned long __nongprelbss __core_bus_clock_speed_HZ;
  34. unsigned long __nongprelbss __core_clock_speed_HZ;
  35. unsigned long __nongprelbss __dsu_clock_speed_HZ;
  36. unsigned long __nongprelbss __serial_clock_speed_HZ;
  37. unsigned long __delay_loops_MHz;
  38. static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs *regs);
  39. static struct irqaction timer_irq = {
  40. timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL
  41. };
  42. static inline int set_rtc_mmss(unsigned long nowtime)
  43. {
  44. return -1;
  45. }
  46. /*
  47. * timer_interrupt() needs to keep up the real-time clock,
  48. * as well as call the "do_timer()" routine every clocktick
  49. */
  50. static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs)
  51. {
  52. /* last time the cmos clock got updated */
  53. static long last_rtc_update = 0;
  54. /*
  55. * Here we are in the timer irq handler. We just have irqs locally
  56. * disabled but we don't know if the timer_bh is running on the other
  57. * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
  58. * the irq version of write_lock because as just said we have irq
  59. * locally disabled. -arca
  60. */
  61. write_seqlock(&xtime_lock);
  62. do_timer(regs);
  63. update_process_times(user_mode(regs));
  64. profile_tick(CPU_PROFILING, regs);
  65. /*
  66. * If we have an externally synchronized Linux clock, then update
  67. * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
  68. * called as close as possible to 500 ms before the new second starts.
  69. */
  70. if (ntp_synced() &&
  71. xtime.tv_sec > last_rtc_update + 660 &&
  72. (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
  73. (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2
  74. ) {
  75. if (set_rtc_mmss(xtime.tv_sec) == 0)
  76. last_rtc_update = xtime.tv_sec;
  77. else
  78. last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
  79. }
  80. #ifdef CONFIG_HEARTBEAT
  81. static unsigned short n;
  82. n++;
  83. __set_LEDS(n);
  84. #endif /* CONFIG_HEARTBEAT */
  85. write_sequnlock(&xtime_lock);
  86. return IRQ_HANDLED;
  87. }
  88. void time_divisor_init(void)
  89. {
  90. unsigned short base, pre, prediv;
  91. /* set the scheduling timer going */
  92. pre = 1;
  93. prediv = 4;
  94. base = __res_bus_clock_speed_HZ / pre / HZ / (1 << prediv);
  95. __set_TPRV(pre);
  96. __set_TxCKSL_DATA(0, prediv);
  97. __set_TCTR(TCTR_SC_CTR0 | TCTR_RL_RW_LH8 | TCTR_MODE_2);
  98. __set_TCSR_DATA(0, base & 0xff);
  99. __set_TCSR_DATA(0, base >> 8);
  100. }
  101. void time_init(void)
  102. {
  103. unsigned int year, mon, day, hour, min, sec;
  104. extern void arch_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
  105. /* FIX by dqg : Set to zero for platforms that don't have tod */
  106. /* without this time is undefined and can overflow time_t, causing */
  107. /* very stange errors */
  108. year = 1980;
  109. mon = day = 1;
  110. hour = min = sec = 0;
  111. arch_gettod (&year, &mon, &day, &hour, &min, &sec);
  112. if ((year += 1900) < 1970)
  113. year += 100;
  114. xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
  115. xtime.tv_nsec = 0;
  116. /* install scheduling interrupt handler */
  117. setup_irq(IRQ_CPU_TIMER0, &timer_irq);
  118. time_divisor_init();
  119. }
  120. /*
  121. * Scheduler clock - returns current time in nanosec units.
  122. */
  123. unsigned long long sched_clock(void)
  124. {
  125. return jiffies_64 * (1000000000 / HZ);
  126. }