islpci_eth.c 15 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511
  1. /*
  2. *
  3. * Copyright (C) 2002 Intersil Americas Inc.
  4. * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
  5. * This program is free software; you can redistribute it and/or modify
  6. * it under the terms of the GNU General Public License as published by
  7. * the Free Software Foundation; either version 2 of the License
  8. *
  9. * This program is distributed in the hope that it will be useful,
  10. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. * GNU General Public License for more details.
  13. *
  14. * You should have received a copy of the GNU General Public License
  15. * along with this program; if not, write to the Free Software
  16. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  17. *
  18. */
  19. #include <linux/version.h>
  20. #include <linux/module.h>
  21. #include <linux/pci.h>
  22. #include <linux/delay.h>
  23. #include <linux/netdevice.h>
  24. #include <linux/etherdevice.h>
  25. #include <linux/if_arp.h>
  26. #include "prismcompat.h"
  27. #include "isl_38xx.h"
  28. #include "islpci_eth.h"
  29. #include "islpci_mgt.h"
  30. #include "oid_mgt.h"
  31. /******************************************************************************
  32. Network Interface functions
  33. ******************************************************************************/
  34. void
  35. islpci_eth_cleanup_transmit(islpci_private *priv,
  36. isl38xx_control_block *control_block)
  37. {
  38. struct sk_buff *skb;
  39. u32 index;
  40. /* compare the control block read pointer with the free pointer */
  41. while (priv->free_data_tx !=
  42. le32_to_cpu(control_block->
  43. device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
  44. /* read the index of the first fragment to be freed */
  45. index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
  46. /* check for holes in the arrays caused by multi fragment frames
  47. * searching for the last fragment of a frame */
  48. if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) {
  49. /* entry is the last fragment of a frame
  50. * free the skb structure and unmap pci memory */
  51. skb = priv->data_low_tx[index];
  52. #if VERBOSE > SHOW_ERROR_MESSAGES
  53. DEBUG(SHOW_TRACING,
  54. "cleanup skb %p skb->data %p skb->len %u truesize %u\n ",
  55. skb, skb->data, skb->len, skb->truesize);
  56. #endif
  57. pci_unmap_single(priv->pdev,
  58. priv->pci_map_tx_address[index],
  59. skb->len, PCI_DMA_TODEVICE);
  60. dev_kfree_skb_irq(skb);
  61. skb = NULL;
  62. }
  63. /* increment the free data low queue pointer */
  64. priv->free_data_tx++;
  65. }
  66. }
  67. int
  68. islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
  69. {
  70. islpci_private *priv = netdev_priv(ndev);
  71. isl38xx_control_block *cb = priv->control_block;
  72. u32 index;
  73. dma_addr_t pci_map_address;
  74. int frame_size;
  75. isl38xx_fragment *fragment;
  76. int offset;
  77. struct sk_buff *newskb;
  78. int newskb_offset;
  79. unsigned long flags;
  80. unsigned char wds_mac[6];
  81. u32 curr_frag;
  82. int err = 0;
  83. #if VERBOSE > SHOW_ERROR_MESSAGES
  84. DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
  85. #endif
  86. /* lock the driver code */
  87. spin_lock_irqsave(&priv->slock, flags);
  88. /* check whether the destination queue has enough fragments for the frame */
  89. curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
  90. if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
  91. printk(KERN_ERR "%s: transmit device queue full when awake\n",
  92. ndev->name);
  93. netif_stop_queue(ndev);
  94. /* trigger the device */
  95. isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
  96. ISL38XX_DEV_INT_REG);
  97. udelay(ISL38XX_WRITEIO_DELAY);
  98. err = -EBUSY;
  99. goto drop_free;
  100. }
  101. /* Check alignment and WDS frame formatting. The start of the packet should
  102. * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
  103. * and add WDS address information */
  104. if (likely(((long) skb->data & 0x03) | init_wds)) {
  105. /* get the number of bytes to add and re-allign */
  106. offset = (4 - (long) skb->data) & 0x03;
  107. offset += init_wds ? 6 : 0;
  108. /* check whether the current skb can be used */
  109. if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
  110. unsigned char *src = skb->data;
  111. #if VERBOSE > SHOW_ERROR_MESSAGES
  112. DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
  113. init_wds);
  114. #endif
  115. /* align the buffer on 4-byte boundary */
  116. skb_reserve(skb, (4 - (long) skb->data) & 0x03);
  117. if (init_wds) {
  118. /* wds requires an additional address field of 6 bytes */
  119. skb_put(skb, 6);
  120. #ifdef ISLPCI_ETH_DEBUG
  121. printk("islpci_eth_transmit:wds_mac\n");
  122. #endif
  123. memmove(skb->data + 6, src, skb->len);
  124. memcpy(skb->data, wds_mac, 6);
  125. } else {
  126. memmove(skb->data, src, skb->len);
  127. }
  128. #if VERBOSE > SHOW_ERROR_MESSAGES
  129. DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
  130. src, skb->len);
  131. #endif
  132. } else {
  133. newskb =
  134. dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
  135. if (unlikely(newskb == NULL)) {
  136. printk(KERN_ERR "%s: Cannot allocate skb\n",
  137. ndev->name);
  138. err = -ENOMEM;
  139. goto drop_free;
  140. }
  141. newskb_offset = (4 - (long) newskb->data) & 0x03;
  142. /* Check if newskb->data is aligned */
  143. if (newskb_offset)
  144. skb_reserve(newskb, newskb_offset);
  145. skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
  146. if (init_wds) {
  147. memcpy(newskb->data + 6, skb->data, skb->len);
  148. memcpy(newskb->data, wds_mac, 6);
  149. #ifdef ISLPCI_ETH_DEBUG
  150. printk("islpci_eth_transmit:wds_mac\n");
  151. #endif
  152. } else
  153. memcpy(newskb->data, skb->data, skb->len);
  154. #if VERBOSE > SHOW_ERROR_MESSAGES
  155. DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
  156. newskb->data, skb->data, skb->len, init_wds);
  157. #endif
  158. newskb->dev = skb->dev;
  159. dev_kfree_skb(skb);
  160. skb = newskb;
  161. }
  162. }
  163. /* display the buffer contents for debugging */
  164. #if VERBOSE > SHOW_ERROR_MESSAGES
  165. DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
  166. display_buffer((char *) skb->data, skb->len);
  167. #endif
  168. /* map the skb buffer to pci memory for DMA operation */
  169. pci_map_address = pci_map_single(priv->pdev,
  170. (void *) skb->data, skb->len,
  171. PCI_DMA_TODEVICE);
  172. if (unlikely(pci_map_address == 0)) {
  173. printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
  174. ndev->name);
  175. err = -EIO;
  176. goto drop_free;
  177. }
  178. /* Place the fragment in the control block structure. */
  179. index = curr_frag % ISL38XX_CB_TX_QSIZE;
  180. fragment = &cb->tx_data_low[index];
  181. priv->pci_map_tx_address[index] = pci_map_address;
  182. /* store the skb address for future freeing */
  183. priv->data_low_tx[index] = skb;
  184. /* set the proper fragment start address and size information */
  185. frame_size = skb->len;
  186. fragment->size = cpu_to_le16(frame_size);
  187. fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
  188. fragment->address = cpu_to_le32(pci_map_address);
  189. curr_frag++;
  190. /* The fragment address in the control block must have been
  191. * written before announcing the frame buffer to device. */
  192. wmb();
  193. cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
  194. if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
  195. > ISL38XX_CB_TX_QSIZE) {
  196. /* stop sends from upper layers */
  197. netif_stop_queue(ndev);
  198. /* set the full flag for the transmission queue */
  199. priv->data_low_tx_full = 1;
  200. }
  201. /* trigger the device */
  202. islpci_trigger(priv);
  203. /* unlock the driver code */
  204. spin_unlock_irqrestore(&priv->slock, flags);
  205. /* set the transmission time */
  206. ndev->trans_start = jiffies;
  207. priv->statistics.tx_packets++;
  208. priv->statistics.tx_bytes += skb->len;
  209. return 0;
  210. drop_free:
  211. priv->statistics.tx_dropped++;
  212. spin_unlock_irqrestore(&priv->slock, flags);
  213. dev_kfree_skb(skb);
  214. return err;
  215. }
  216. static inline int
  217. islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
  218. {
  219. /* The card reports full 802.11 packets but with a 20 bytes
  220. * header and without the FCS. But there a is a bit that
  221. * indicates if the packet is corrupted :-) */
  222. struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data;
  223. if (hdr->flags & 0x01)
  224. /* This one is bad. Drop it ! */
  225. return -1;
  226. if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) {
  227. struct avs_80211_1_header *avs;
  228. /* extract the relevant data from the header */
  229. u32 clock = le32_to_cpu(hdr->clock);
  230. u8 rate = hdr->rate;
  231. u16 freq = le16_to_cpu(hdr->freq);
  232. u8 rssi = hdr->rssi;
  233. skb_pull(*skb, sizeof (struct rfmon_header));
  234. if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) {
  235. struct sk_buff *newskb = skb_copy_expand(*skb,
  236. sizeof (struct
  237. avs_80211_1_header),
  238. 0, GFP_ATOMIC);
  239. if (newskb) {
  240. dev_kfree_skb_irq(*skb);
  241. *skb = newskb;
  242. } else
  243. return -1;
  244. /* This behavior is not very subtile... */
  245. }
  246. /* make room for the new header and fill it. */
  247. avs =
  248. (struct avs_80211_1_header *) skb_push(*skb,
  249. sizeof (struct
  250. avs_80211_1_header));
  251. avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
  252. avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
  253. avs->mactime = cpu_to_be64(le64_to_cpu(clock));
  254. avs->hosttime = cpu_to_be64(jiffies);
  255. avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */
  256. avs->channel = cpu_to_be32(channel_of_freq(freq));
  257. avs->datarate = cpu_to_be32(rate * 5);
  258. avs->antenna = cpu_to_be32(0); /*unknown */
  259. avs->priority = cpu_to_be32(0); /*unknown */
  260. avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */
  261. avs->ssi_signal = cpu_to_be32(rssi & 0x7f);
  262. avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */
  263. avs->preamble = cpu_to_be32(0); /*unknown */
  264. avs->encoding = cpu_to_be32(0); /*unknown */
  265. } else
  266. skb_pull(*skb, sizeof (struct rfmon_header));
  267. (*skb)->protocol = htons(ETH_P_802_2);
  268. (*skb)->mac.raw = (*skb)->data;
  269. (*skb)->pkt_type = PACKET_OTHERHOST;
  270. return 0;
  271. }
  272. int
  273. islpci_eth_receive(islpci_private *priv)
  274. {
  275. struct net_device *ndev = priv->ndev;
  276. isl38xx_control_block *control_block = priv->control_block;
  277. struct sk_buff *skb;
  278. u16 size;
  279. u32 index, offset;
  280. unsigned char *src;
  281. int discard = 0;
  282. #if VERBOSE > SHOW_ERROR_MESSAGES
  283. DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
  284. #endif
  285. /* the device has written an Ethernet frame in the data area
  286. * of the sk_buff without updating the structure, do it now */
  287. index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
  288. size = le16_to_cpu(control_block->rx_data_low[index].size);
  289. skb = priv->data_low_rx[index];
  290. offset = ((unsigned long)
  291. le32_to_cpu(control_block->rx_data_low[index].address) -
  292. (unsigned long) skb->data) & 3;
  293. #if VERBOSE > SHOW_ERROR_MESSAGES
  294. DEBUG(SHOW_TRACING,
  295. "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ",
  296. control_block->rx_data_low[priv->free_data_rx].address, skb->data,
  297. skb->len, offset, skb->truesize);
  298. #endif
  299. /* delete the streaming DMA mapping before processing the skb */
  300. pci_unmap_single(priv->pdev,
  301. priv->pci_map_rx_address[index],
  302. MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
  303. /* update the skb structure and allign the buffer */
  304. skb_put(skb, size);
  305. if (offset) {
  306. /* shift the buffer allocation offset bytes to get the right frame */
  307. skb_pull(skb, 2);
  308. skb_put(skb, 2);
  309. }
  310. #if VERBOSE > SHOW_ERROR_MESSAGES
  311. /* display the buffer contents for debugging */
  312. DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
  313. display_buffer((char *) skb->data, skb->len);
  314. #endif
  315. /* check whether WDS is enabled and whether the data frame is a WDS frame */
  316. if (init_wds) {
  317. /* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
  318. src = skb->data + 6;
  319. memmove(skb->data, src, skb->len - 6);
  320. skb_trim(skb, skb->len - 6);
  321. }
  322. #if VERBOSE > SHOW_ERROR_MESSAGES
  323. DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
  324. DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
  325. /* display the buffer contents for debugging */
  326. DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
  327. display_buffer((char *) skb->data, skb->len);
  328. #endif
  329. /* do some additional sk_buff and network layer parameters */
  330. skb->dev = ndev;
  331. /* take care of monitor mode and spy monitoring. */
  332. if (unlikely(priv->iw_mode == IW_MODE_MONITOR))
  333. discard = islpci_monitor_rx(priv, &skb);
  334. else {
  335. if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
  336. /* The packet has a rx_annex. Read it for spy monitoring, Then
  337. * remove it, while keeping the 2 leading MAC addr.
  338. */
  339. struct iw_quality wstats;
  340. struct rx_annex_header *annex =
  341. (struct rx_annex_header *) skb->data;
  342. wstats.level = annex->rfmon.rssi;
  343. /* The noise value can be a bit outdated if nobody's
  344. * reading wireless stats... */
  345. wstats.noise = priv->local_iwstatistics.qual.noise;
  346. wstats.qual = wstats.level - wstats.noise;
  347. wstats.updated = 0x07;
  348. /* Update spy records */
  349. wireless_spy_update(ndev, annex->addr2, &wstats);
  350. memcpy(skb->data + sizeof (struct rfmon_header),
  351. skb->data, 2 * ETH_ALEN);
  352. skb_pull(skb, sizeof (struct rfmon_header));
  353. }
  354. skb->protocol = eth_type_trans(skb, ndev);
  355. }
  356. skb->ip_summed = CHECKSUM_NONE;
  357. priv->statistics.rx_packets++;
  358. priv->statistics.rx_bytes += size;
  359. /* deliver the skb to the network layer */
  360. #ifdef ISLPCI_ETH_DEBUG
  361. printk
  362. ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
  363. skb->data[0], skb->data[1], skb->data[2], skb->data[3],
  364. skb->data[4], skb->data[5]);
  365. #endif
  366. if (unlikely(discard)) {
  367. dev_kfree_skb_irq(skb);
  368. skb = NULL;
  369. } else
  370. netif_rx(skb);
  371. /* increment the read index for the rx data low queue */
  372. priv->free_data_rx++;
  373. /* add one or more sk_buff structures */
  374. while (index =
  375. le32_to_cpu(control_block->
  376. driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
  377. index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
  378. /* allocate an sk_buff for received data frames storage
  379. * include any required allignment operations */
  380. skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
  381. if (unlikely(skb == NULL)) {
  382. /* error allocating an sk_buff structure elements */
  383. DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
  384. break;
  385. }
  386. skb_reserve(skb, (4 - (long) skb->data) & 0x03);
  387. /* store the new skb structure pointer */
  388. index = index % ISL38XX_CB_RX_QSIZE;
  389. priv->data_low_rx[index] = skb;
  390. #if VERBOSE > SHOW_ERROR_MESSAGES
  391. DEBUG(SHOW_TRACING,
  392. "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ",
  393. skb, skb->data, skb->len, index, skb->truesize);
  394. #endif
  395. /* set the streaming DMA mapping for proper PCI bus operation */
  396. priv->pci_map_rx_address[index] =
  397. pci_map_single(priv->pdev, (void *) skb->data,
  398. MAX_FRAGMENT_SIZE_RX + 2,
  399. PCI_DMA_FROMDEVICE);
  400. if (unlikely(priv->pci_map_rx_address[index] == (dma_addr_t) NULL)) {
  401. /* error mapping the buffer to device accessable memory address */
  402. DEBUG(SHOW_ERROR_MESSAGES,
  403. "Error mapping DMA address\n");
  404. /* free the skbuf structure before aborting */
  405. dev_kfree_skb_irq((struct sk_buff *) skb);
  406. skb = NULL;
  407. break;
  408. }
  409. /* update the fragment address */
  410. control_block->rx_data_low[index].address = cpu_to_le32((u32)
  411. priv->
  412. pci_map_rx_address
  413. [index]);
  414. wmb();
  415. /* increment the driver read pointer */
  416. add_le32p((u32 *) &control_block->
  417. driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
  418. }
  419. /* trigger the device */
  420. islpci_trigger(priv);
  421. return 0;
  422. }
  423. void
  424. islpci_do_reset_and_wake(void *data)
  425. {
  426. islpci_private *priv = (islpci_private *) data;
  427. islpci_reset(priv, 1);
  428. netif_wake_queue(priv->ndev);
  429. priv->reset_task_pending = 0;
  430. }
  431. void
  432. islpci_eth_tx_timeout(struct net_device *ndev)
  433. {
  434. islpci_private *priv = netdev_priv(ndev);
  435. struct net_device_stats *statistics = &priv->statistics;
  436. /* increment the transmit error counter */
  437. statistics->tx_errors++;
  438. printk(KERN_WARNING "%s: tx_timeout", ndev->name);
  439. if (!priv->reset_task_pending) {
  440. priv->reset_task_pending = 1;
  441. printk(", scheduling a reset");
  442. netif_stop_queue(ndev);
  443. schedule_work(&priv->reset_task);
  444. }
  445. printk("\n");
  446. }