uncompress.h 2.0 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788
  1. /*
  2. * linux/include/asm-arm/arch-omap/uncompress.h
  3. *
  4. * Serial port stubs for kernel decompress status messages
  5. *
  6. * Initially based on:
  7. * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h
  8. * Copyright (C) 2000 RidgeRun, Inc.
  9. * Author: Greg Lonnon <glonnon@ridgerun.com>
  10. *
  11. * Rewritten by:
  12. * Author: <source@mvista.com>
  13. * 2004 (c) MontaVista Software, Inc.
  14. *
  15. * This file is licensed under the terms of the GNU General Public License
  16. * version 2. This program is licensed "as is" without any warranty of any
  17. * kind, whether express or implied.
  18. */
  19. #include <linux/config.h>
  20. #include <linux/types.h>
  21. #include <linux/serial_reg.h>
  22. #include <asm/arch/serial.h>
  23. unsigned int system_rev;
  24. #define UART_OMAP_MDR1 0x08 /* mode definition register */
  25. #define OMAP_ID_730 0x355F
  26. #define ID_MASK 0x7fff
  27. #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
  28. #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
  29. static void
  30. putstr(const char *s)
  31. {
  32. volatile u8 * uart = 0;
  33. int shift = 2;
  34. #ifdef CONFIG_MACH_OMAP_PALMTE
  35. return;
  36. #endif
  37. #ifdef CONFIG_ARCH_OMAP
  38. #ifdef CONFIG_OMAP_LL_DEBUG_UART3
  39. uart = (volatile u8 *)(OMAP_UART3_BASE);
  40. #elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
  41. uart = (volatile u8 *)(OMAP_UART2_BASE);
  42. #else
  43. uart = (volatile u8 *)(OMAP_UART1_BASE);
  44. #endif
  45. #ifdef CONFIG_ARCH_OMAP1
  46. /* Determine which serial port to use */
  47. do {
  48. /* MMU is not on, so cpu_is_omapXXXX() won't work here */
  49. unsigned int omap_id = omap_get_id();
  50. if (omap_id == OMAP_ID_730)
  51. shift = 0;
  52. if (check_port(uart, shift))
  53. break;
  54. /* Silent boot if no serial ports are enabled. */
  55. return;
  56. } while (0);
  57. #endif /* CONFIG_ARCH_OMAP1 */
  58. #endif
  59. /*
  60. * Now, xmit each character
  61. */
  62. while (*s) {
  63. while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
  64. barrier();
  65. uart[UART_TX << shift] = *s;
  66. if (*s++ == '\n') {
  67. while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
  68. barrier();
  69. uart[UART_TX << shift] = '\r';
  70. }
  71. }
  72. }
  73. /*
  74. * nothing to do
  75. */
  76. #define arch_decomp_setup()
  77. #define arch_decomp_wdog()