shpchp_pci.c 5.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186
  1. /*
  2. * Standard Hot Plug Controller Driver
  3. *
  4. * Copyright (C) 1995,2001 Compaq Computer Corporation
  5. * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  6. * Copyright (C) 2001 IBM Corp.
  7. * Copyright (C) 2003-2004 Intel Corporation
  8. *
  9. * All rights reserved.
  10. *
  11. * This program is free software; you can redistribute it and/or modify
  12. * it under the terms of the GNU General Public License as published by
  13. * the Free Software Foundation; either version 2 of the License, or (at
  14. * your option) any later version.
  15. *
  16. * This program is distributed in the hope that it will be useful, but
  17. * WITHOUT ANY WARRANTY; without even the implied warranty of
  18. * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  19. * NON INFRINGEMENT. See the GNU General Public License for more
  20. * details.
  21. *
  22. * You should have received a copy of the GNU General Public License
  23. * along with this program; if not, write to the Free Software
  24. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25. *
  26. * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  27. *
  28. */
  29. #include <linux/module.h>
  30. #include <linux/kernel.h>
  31. #include <linux/types.h>
  32. #include <linux/pci.h>
  33. #include "../pci.h"
  34. #include "shpchp.h"
  35. static void program_fw_provided_values(struct pci_dev *dev)
  36. {
  37. u16 pci_cmd, pci_bctl;
  38. struct pci_dev *cdev;
  39. struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */
  40. /* Program hpp values for this device */
  41. if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
  42. (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
  43. (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
  44. return;
  45. get_hp_params_from_firmware(dev, &hpp);
  46. pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size);
  47. pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer);
  48. pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
  49. if (hpp.enable_serr)
  50. pci_cmd |= PCI_COMMAND_SERR;
  51. else
  52. pci_cmd &= ~PCI_COMMAND_SERR;
  53. if (hpp.enable_perr)
  54. pci_cmd |= PCI_COMMAND_PARITY;
  55. else
  56. pci_cmd &= ~PCI_COMMAND_PARITY;
  57. pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
  58. /* Program bridge control value and child devices */
  59. if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
  60. pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
  61. hpp.latency_timer);
  62. pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
  63. if (hpp.enable_serr)
  64. pci_bctl |= PCI_BRIDGE_CTL_SERR;
  65. else
  66. pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
  67. if (hpp.enable_perr)
  68. pci_bctl |= PCI_BRIDGE_CTL_PARITY;
  69. else
  70. pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
  71. pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
  72. if (dev->subordinate) {
  73. list_for_each_entry(cdev, &dev->subordinate->devices,
  74. bus_list)
  75. program_fw_provided_values(cdev);
  76. }
  77. }
  78. }
  79. int shpchp_configure_device(struct slot *p_slot)
  80. {
  81. struct pci_dev *dev;
  82. struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
  83. int num, fn;
  84. dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
  85. if (dev) {
  86. err("Device %s already exists at %x:%x, cannot hot-add\n",
  87. pci_name(dev), p_slot->bus, p_slot->device);
  88. pci_dev_put(dev);
  89. return -EINVAL;
  90. }
  91. num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
  92. if (num == 0) {
  93. err("No new device found\n");
  94. return -ENODEV;
  95. }
  96. for (fn = 0; fn < 8; fn++) {
  97. dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
  98. if (!dev)
  99. continue;
  100. if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
  101. err("Cannot hot-add display device %s\n",
  102. pci_name(dev));
  103. pci_dev_put(dev);
  104. continue;
  105. }
  106. if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
  107. (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
  108. /* Find an unused bus number for the new bridge */
  109. struct pci_bus *child;
  110. unsigned char busnr, start = parent->secondary;
  111. unsigned char end = parent->subordinate;
  112. for (busnr = start; busnr <= end; busnr++) {
  113. if (!pci_find_bus(pci_domain_nr(parent),
  114. busnr))
  115. break;
  116. }
  117. if (busnr >= end) {
  118. err("No free bus for hot-added bridge\n");
  119. pci_dev_put(dev);
  120. continue;
  121. }
  122. child = pci_add_new_bus(parent, dev, busnr);
  123. if (!child) {
  124. err("Cannot add new bus for %s\n",
  125. pci_name(dev));
  126. pci_dev_put(dev);
  127. continue;
  128. }
  129. child->subordinate = pci_do_scan_bus(child);
  130. pci_bus_size_bridges(child);
  131. }
  132. program_fw_provided_values(dev);
  133. pci_dev_put(dev);
  134. }
  135. pci_bus_assign_resources(parent);
  136. pci_bus_add_devices(parent);
  137. pci_enable_bridges(parent);
  138. return 0;
  139. }
  140. int shpchp_unconfigure_device(struct slot *p_slot)
  141. {
  142. int rc = 0;
  143. int j;
  144. u8 bctl = 0;
  145. struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
  146. dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device);
  147. for (j=0; j<8 ; j++) {
  148. struct pci_dev* temp = pci_get_slot(parent,
  149. (p_slot->device << 3) | j);
  150. if (!temp)
  151. continue;
  152. if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
  153. err("Cannot remove display device %s\n",
  154. pci_name(temp));
  155. pci_dev_put(temp);
  156. continue;
  157. }
  158. if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
  159. pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
  160. if (bctl & PCI_BRIDGE_CTL_VGA) {
  161. err("Cannot remove display device %s\n",
  162. pci_name(temp));
  163. pci_dev_put(temp);
  164. continue;
  165. }
  166. }
  167. pci_remove_bus_device(temp);
  168. pci_dev_put(temp);
  169. }
  170. return rc;
  171. }