123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201 |
- /*
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved.
- * Author: Maciej W. Rozycki <macro@mips.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
- /*
- * Derived loosely from ide-pmac.c, so:
- * Copyright (C) 1998 Paul Mackerras.
- * Copyright (C) 1995-1998 Mark Lord
- */
- /*
- * Boards with SiByte processors so far have supported IDE devices via
- * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all
- * cases, byte-swapping must be avoided for these devices (whereas
- * other PCI devices, for example, will require swapping). Any
- * SiByte-targetted kernel including IDE support will include this
- * file. Probing of a Generic Bus for an IDE device is controlled by
- * the definition of "SIBYTE_HAVE_IDE", which is provided by
- * <asm/sibyte/board.h> for Broadcom boards.
- */
- #include <linux/ide.h>
- #include <linux/ioport.h>
- #include <linux/kernel.h>
- #include <linux/types.h>
- #include <linux/platform_device.h>
- #include <asm/io.h>
- #include <asm/sibyte/board.h>
- #include <asm/sibyte/sb1250_genbus.h>
- #include <asm/sibyte/sb1250_regs.h>
- #define DRV_NAME "ide-swarm"
- static char swarm_ide_string[] = DRV_NAME;
- static struct resource swarm_ide_resource = {
- .name = "SWARM GenBus IDE",
- .flags = IORESOURCE_MEM,
- };
- static struct platform_device *swarm_ide_dev;
- /*
- * swarm_ide_probe - if the board header indicates the existence of
- * Generic Bus IDE, allocate a HWIF for it.
- */
- static int __devinit swarm_ide_probe(struct device *dev)
- {
- ide_hwif_t *hwif;
- u8 __iomem *base;
- phys_t offset, size;
- int i;
- if (!SIBYTE_HAVE_IDE)
- return -ENODEV;
- /* Find an empty slot. */
- for (i = 0; i < MAX_HWIFS; i++)
- if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET])
- break;
- if (i >= MAX_HWIFS) {
- printk(KERN_ERR DRV_NAME ": no free slot for interface\n");
- return -ENOMEM;
- }
- hwif = ide_hwifs + i;
- base = ioremap(A_IO_EXT_BASE, 0x800);
- offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
- size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
- iounmap(base);
- offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
- size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
- if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
- printk(KERN_INFO DRV_NAME
- ": IDE interface at GenBus disabled\n");
- return -EBUSY;
- }
- printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
- IDE_CS);
- swarm_ide_resource.start = offset;
- swarm_ide_resource.end = offset + size - 1;
- if (request_resource(&iomem_resource, &swarm_ide_resource)) {
- printk(KERN_ERR DRV_NAME
- ": can't request I/O memory resource\n");
- return -EBUSY;
- }
- base = ioremap(offset, size);
- /* Setup MMIO ops. */
- default_hwif_mmiops(hwif);
- /* Prevent resource map manipulation. */
- hwif->mmio = 2;
- hwif->noprobe = 0;
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hwif->hw.io_ports[i] =
- (unsigned long)(base + ((0x1f0 + i) << 5));
- hwif->hw.io_ports[IDE_CONTROL_OFFSET] =
- (unsigned long)(base + (0x3f6 << 5));
- hwif->hw.irq = K_INT_GB_IDE;
- memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
- hwif->irq = hwif->hw.irq;
- dev_set_drvdata(dev, hwif);
- return 0;
- }
- static struct device_driver swarm_ide_driver = {
- .name = swarm_ide_string,
- .bus = &platform_bus_type,
- .probe = swarm_ide_probe,
- };
- static void swarm_ide_platform_release(struct device *device)
- {
- struct platform_device *pldev;
- /* free device */
- pldev = to_platform_device(device);
- kfree(pldev);
- }
- static int __devinit swarm_ide_init_module(void)
- {
- struct platform_device *pldev;
- int err;
- printk(KERN_INFO "SWARM IDE driver\n");
- if (driver_register(&swarm_ide_driver)) {
- printk(KERN_ERR "Driver registration failed\n");
- err = -ENODEV;
- goto out;
- }
- if (!(pldev = kmalloc(sizeof (*pldev), GFP_KERNEL))) {
- err = -ENOMEM;
- goto out_unregister_driver;
- }
- memset (pldev, 0, sizeof (*pldev));
- pldev->name = swarm_ide_string;
- pldev->id = 0;
- pldev->dev.release = swarm_ide_platform_release;
- if (platform_device_register(pldev)) {
- err = -ENODEV;
- goto out_free_pldev;
- }
- if (!pldev->dev.driver) {
- /*
- * The driver was not bound to this device, there was
- * no hardware at this address. Unregister it, as the
- * release fuction will take care of freeing the
- * allocated structure
- */
- platform_device_unregister (pldev);
- }
- swarm_ide_dev = pldev;
- return 0;
- out_free_pldev:
- kfree(pldev);
- out_unregister_driver:
- driver_unregister(&swarm_ide_driver);
- out:
- return err;
- }
- module_init(swarm_ide_init_module);
|