yam.c 31 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188
  1. /*****************************************************************************/
  2. /*
  3. * yam.c -- YAM radio modem driver.
  4. *
  5. * Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
  6. * Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
  7. *
  8. * This program is free software; you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation; either version 2 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21. *
  22. * Please note that the GPL allows you to use the driver, NOT the radio.
  23. * In order to use the radio, you need a license from the communications
  24. * authority of your country.
  25. *
  26. *
  27. * History:
  28. * 0.0 F1OAT 06.06.98 Begin of work with baycom.c source code V 0.3
  29. * 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration
  30. * 0.2 F6FBB 08.06.98 Added delay after FPGA programming
  31. * 0.3 F6FBB 29.07.98 Delayed PTT implementation for dupmode=2
  32. * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistance
  33. * 0.5 F6FBB 01.08.98 Shared IRQs, /proc/net and network statistics
  34. * 0.6 F6FBB 25.08.98 Added 1200Bds format
  35. * 0.7 F6FBB 12.09.98 Added to the kernel configuration
  36. * 0.8 F6FBB 14.10.98 Fixed slottime/persistence timing bug
  37. * OK1ZIA 2.09.01 Fixed "kfree_skb on hard IRQ"
  38. * using dev_kfree_skb_any(). (important in 2.4 kernel)
  39. *
  40. */
  41. /*****************************************************************************/
  42. #include <linux/module.h>
  43. #include <linux/types.h>
  44. #include <linux/net.h>
  45. #include <linux/in.h>
  46. #include <linux/if.h>
  47. #include <linux/slab.h>
  48. #include <linux/errno.h>
  49. #include <linux/bitops.h>
  50. #include <linux/random.h>
  51. #include <asm/io.h>
  52. #include <asm/system.h>
  53. #include <linux/interrupt.h>
  54. #include <linux/ioport.h>
  55. #include <linux/netdevice.h>
  56. #include <linux/if_arp.h>
  57. #include <linux/etherdevice.h>
  58. #include <linux/skbuff.h>
  59. #include <net/ax25.h>
  60. #include <linux/kernel.h>
  61. #include <linux/proc_fs.h>
  62. #include <linux/seq_file.h>
  63. #include <asm/uaccess.h>
  64. #include <linux/init.h>
  65. #include <linux/yam.h>
  66. #include "yam9600.h"
  67. #include "yam1200.h"
  68. /* --------------------------------------------------------------------- */
  69. static const char yam_drvname[] = "yam";
  70. static char yam_drvinfo[] __initdata = KERN_INFO "YAM driver version 0.8 by F1OAT/F6FBB\n";
  71. /* --------------------------------------------------------------------- */
  72. #define YAM_9600 1
  73. #define YAM_1200 2
  74. #define NR_PORTS 4
  75. #define YAM_MAGIC 0xF10A7654
  76. /* Transmitter states */
  77. #define TX_OFF 0
  78. #define TX_HEAD 1
  79. #define TX_DATA 2
  80. #define TX_CRC1 3
  81. #define TX_CRC2 4
  82. #define TX_TAIL 5
  83. #define YAM_MAX_FRAME 1024
  84. #define DEFAULT_BITRATE 9600 /* bps */
  85. #define DEFAULT_HOLDD 10 /* sec */
  86. #define DEFAULT_TXD 300 /* ms */
  87. #define DEFAULT_TXTAIL 10 /* ms */
  88. #define DEFAULT_SLOT 100 /* ms */
  89. #define DEFAULT_PERS 64 /* 0->255 */
  90. struct yam_port {
  91. int magic;
  92. int bitrate;
  93. int baudrate;
  94. int iobase;
  95. int irq;
  96. int dupmode;
  97. struct net_device *dev;
  98. /* Stats section */
  99. struct net_device_stats stats;
  100. int nb_rxint;
  101. int nb_mdint;
  102. /* Parameters section */
  103. int txd; /* tx delay */
  104. int holdd; /* duplex ptt delay */
  105. int txtail; /* txtail delay */
  106. int slot; /* slottime */
  107. int pers; /* persistence */
  108. /* Tx section */
  109. int tx_state;
  110. int tx_count;
  111. int slotcnt;
  112. unsigned char tx_buf[YAM_MAX_FRAME];
  113. int tx_len;
  114. int tx_crcl, tx_crch;
  115. struct sk_buff_head send_queue; /* Packets awaiting transmission */
  116. /* Rx section */
  117. int dcd;
  118. unsigned char rx_buf[YAM_MAX_FRAME];
  119. int rx_len;
  120. int rx_crcl, rx_crch;
  121. };
  122. struct yam_mcs {
  123. unsigned char bits[YAM_FPGA_SIZE];
  124. int bitrate;
  125. struct yam_mcs *next;
  126. };
  127. static struct net_device *yam_devs[NR_PORTS];
  128. static struct yam_mcs *yam_data;
  129. static DEFINE_TIMER(yam_timer, NULL, 0, 0);
  130. /* --------------------------------------------------------------------- */
  131. #define RBR(iobase) (iobase+0)
  132. #define THR(iobase) (iobase+0)
  133. #define IER(iobase) (iobase+1)
  134. #define IIR(iobase) (iobase+2)
  135. #define FCR(iobase) (iobase+2)
  136. #define LCR(iobase) (iobase+3)
  137. #define MCR(iobase) (iobase+4)
  138. #define LSR(iobase) (iobase+5)
  139. #define MSR(iobase) (iobase+6)
  140. #define SCR(iobase) (iobase+7)
  141. #define DLL(iobase) (iobase+0)
  142. #define DLM(iobase) (iobase+1)
  143. #define YAM_EXTENT 8
  144. /* Interrupt Identification Register Bit Masks */
  145. #define IIR_NOPEND 1
  146. #define IIR_MSR 0
  147. #define IIR_TX 2
  148. #define IIR_RX 4
  149. #define IIR_LSR 6
  150. #define IIR_TIMEOUT 12 /* Fifo mode only */
  151. #define IIR_MASK 0x0F
  152. /* Interrupt Enable Register Bit Masks */
  153. #define IER_RX 1 /* enable rx interrupt */
  154. #define IER_TX 2 /* enable tx interrupt */
  155. #define IER_LSR 4 /* enable line status interrupts */
  156. #define IER_MSR 8 /* enable modem status interrupts */
  157. /* Modem Control Register Bit Masks */
  158. #define MCR_DTR 0x01 /* DTR output */
  159. #define MCR_RTS 0x02 /* RTS output */
  160. #define MCR_OUT1 0x04 /* OUT1 output (not accessible in RS232) */
  161. #define MCR_OUT2 0x08 /* Master Interrupt enable (must be set on PCs) */
  162. #define MCR_LOOP 0x10 /* Loopback enable */
  163. /* Modem Status Register Bit Masks */
  164. #define MSR_DCTS 0x01 /* Delta CTS input */
  165. #define MSR_DDSR 0x02 /* Delta DSR */
  166. #define MSR_DRIN 0x04 /* Delta RI */
  167. #define MSR_DDCD 0x08 /* Delta DCD */
  168. #define MSR_CTS 0x10 /* CTS input */
  169. #define MSR_DSR 0x20 /* DSR input */
  170. #define MSR_RING 0x40 /* RI input */
  171. #define MSR_DCD 0x80 /* DCD input */
  172. /* line status register bit mask */
  173. #define LSR_RXC 0x01
  174. #define LSR_OE 0x02
  175. #define LSR_PE 0x04
  176. #define LSR_FE 0x08
  177. #define LSR_BREAK 0x10
  178. #define LSR_THRE 0x20
  179. #define LSR_TSRE 0x40
  180. /* Line Control Register Bit Masks */
  181. #define LCR_DLAB 0x80
  182. #define LCR_BREAK 0x40
  183. #define LCR_PZERO 0x28
  184. #define LCR_PEVEN 0x18
  185. #define LCR_PODD 0x08
  186. #define LCR_STOP1 0x00
  187. #define LCR_STOP2 0x04
  188. #define LCR_BIT5 0x00
  189. #define LCR_BIT6 0x02
  190. #define LCR_BIT7 0x01
  191. #define LCR_BIT8 0x03
  192. /* YAM Modem <-> UART Port mapping */
  193. #define TX_RDY MSR_DCTS /* transmitter ready to send */
  194. #define RX_DCD MSR_DCD /* carrier detect */
  195. #define RX_FLAG MSR_RING /* hdlc flag received */
  196. #define FPGA_DONE MSR_DSR /* FPGA is configured */
  197. #define PTT_ON (MCR_RTS|MCR_OUT2) /* activate PTT */
  198. #define PTT_OFF (MCR_DTR|MCR_OUT2) /* release PTT */
  199. #define ENABLE_RXINT IER_RX /* enable uart rx interrupt during rx */
  200. #define ENABLE_TXINT IER_MSR /* enable uart ms interrupt during tx */
  201. #define ENABLE_RTXINT (IER_RX|IER_MSR) /* full duplex operations */
  202. /*************************************************************************
  203. * CRC Tables
  204. ************************************************************************/
  205. static const unsigned char chktabl[256] =
  206. {0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e,
  207. 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64,
  208. 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e,
  209. 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50,
  210. 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e,
  211. 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44,
  212. 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e,
  213. 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38,
  214. 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e,
  215. 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24,
  216. 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e,
  217. 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10,
  218. 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e,
  219. 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04,
  220. 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e,
  221. 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9,
  222. 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1,
  223. 0x78};
  224. static const unsigned char chktabh[256] =
  225. {0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9,
  226. 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb,
  227. 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb,
  228. 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f,
  229. 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed,
  230. 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf,
  231. 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef,
  232. 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07,
  233. 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1,
  234. 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3,
  235. 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3,
  236. 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87,
  237. 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5,
  238. 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7,
  239. 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7,
  240. 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f,
  241. 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e,
  242. 0x0f};
  243. /*************************************************************************
  244. * FPGA functions
  245. ************************************************************************/
  246. static void delay(int ms)
  247. {
  248. unsigned long timeout = jiffies + ((ms * HZ) / 1000);
  249. while (time_before(jiffies, timeout))
  250. cpu_relax();
  251. }
  252. /*
  253. * reset FPGA
  254. */
  255. static void fpga_reset(int iobase)
  256. {
  257. outb(0, IER(iobase));
  258. outb(LCR_DLAB | LCR_BIT5, LCR(iobase));
  259. outb(1, DLL(iobase));
  260. outb(0, DLM(iobase));
  261. outb(LCR_BIT5, LCR(iobase));
  262. inb(LSR(iobase));
  263. inb(MSR(iobase));
  264. /* turn off FPGA supply voltage */
  265. outb(MCR_OUT1 | MCR_OUT2, MCR(iobase));
  266. delay(100);
  267. /* turn on FPGA supply voltage again */
  268. outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase));
  269. delay(100);
  270. }
  271. /*
  272. * send one byte to FPGA
  273. */
  274. static int fpga_write(int iobase, unsigned char wrd)
  275. {
  276. unsigned char bit;
  277. int k;
  278. unsigned long timeout = jiffies + HZ / 10;
  279. for (k = 0; k < 8; k++) {
  280. bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR;
  281. outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase));
  282. wrd <<= 1;
  283. outb(0xfc, THR(iobase));
  284. while ((inb(LSR(iobase)) & LSR_TSRE) == 0)
  285. if (time_after(jiffies, timeout))
  286. return -1;
  287. }
  288. return 0;
  289. }
  290. static unsigned char *add_mcs(unsigned char *bits, int bitrate)
  291. {
  292. struct yam_mcs *p;
  293. /* If it already exists, replace the bit data */
  294. p = yam_data;
  295. while (p) {
  296. if (p->bitrate == bitrate) {
  297. memcpy(p->bits, bits, YAM_FPGA_SIZE);
  298. return p->bits;
  299. }
  300. p = p->next;
  301. }
  302. /* Allocate a new mcs */
  303. if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) {
  304. printk(KERN_WARNING "YAM: no memory to allocate mcs\n");
  305. return NULL;
  306. }
  307. memcpy(p->bits, bits, YAM_FPGA_SIZE);
  308. p->bitrate = bitrate;
  309. p->next = yam_data;
  310. yam_data = p;
  311. return p->bits;
  312. }
  313. static unsigned char *get_mcs(int bitrate)
  314. {
  315. struct yam_mcs *p;
  316. p = yam_data;
  317. while (p) {
  318. if (p->bitrate == bitrate)
  319. return p->bits;
  320. p = p->next;
  321. }
  322. /* Load predefined mcs data */
  323. switch (bitrate) {
  324. case 1200:
  325. return add_mcs(bits_1200, bitrate);
  326. default:
  327. return add_mcs(bits_9600, bitrate);
  328. }
  329. }
  330. /*
  331. * download bitstream to FPGA
  332. * data is contained in bits[] array in yam1200.h resp. yam9600.h
  333. */
  334. static int fpga_download(int iobase, int bitrate)
  335. {
  336. int i, rc;
  337. unsigned char *pbits;
  338. pbits = get_mcs(bitrate);
  339. if (pbits == NULL)
  340. return -1;
  341. fpga_reset(iobase);
  342. for (i = 0; i < YAM_FPGA_SIZE; i++) {
  343. if (fpga_write(iobase, pbits[i])) {
  344. printk(KERN_ERR "yam: error in write cycle\n");
  345. return -1; /* write... */
  346. }
  347. }
  348. fpga_write(iobase, 0xFF);
  349. rc = inb(MSR(iobase)); /* check DONE signal */
  350. /* Needed for some hardwares */
  351. delay(50);
  352. return (rc & MSR_DSR) ? 0 : -1;
  353. }
  354. /************************************************************************
  355. * Serial port init
  356. ************************************************************************/
  357. static void yam_set_uart(struct net_device *dev)
  358. {
  359. struct yam_port *yp = netdev_priv(dev);
  360. int divisor = 115200 / yp->baudrate;
  361. outb(0, IER(dev->base_addr));
  362. outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr));
  363. outb(divisor, DLL(dev->base_addr));
  364. outb(0, DLM(dev->base_addr));
  365. outb(LCR_BIT8, LCR(dev->base_addr));
  366. outb(PTT_OFF, MCR(dev->base_addr));
  367. outb(0x00, FCR(dev->base_addr));
  368. /* Flush pending irq */
  369. inb(RBR(dev->base_addr));
  370. inb(MSR(dev->base_addr));
  371. /* Enable rx irq */
  372. outb(ENABLE_RTXINT, IER(dev->base_addr));
  373. }
  374. /* --------------------------------------------------------------------- */
  375. enum uart {
  376. c_uart_unknown, c_uart_8250,
  377. c_uart_16450, c_uart_16550, c_uart_16550A
  378. };
  379. static const char *uart_str[] =
  380. {"unknown", "8250", "16450", "16550", "16550A"};
  381. static enum uart yam_check_uart(unsigned int iobase)
  382. {
  383. unsigned char b1, b2, b3;
  384. enum uart u;
  385. enum uart uart_tab[] =
  386. {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A};
  387. b1 = inb(MCR(iobase));
  388. outb(b1 | 0x10, MCR(iobase)); /* loopback mode */
  389. b2 = inb(MSR(iobase));
  390. outb(0x1a, MCR(iobase));
  391. b3 = inb(MSR(iobase)) & 0xf0;
  392. outb(b1, MCR(iobase)); /* restore old values */
  393. outb(b2, MSR(iobase));
  394. if (b3 != 0x90)
  395. return c_uart_unknown;
  396. inb(RBR(iobase));
  397. inb(RBR(iobase));
  398. outb(0x01, FCR(iobase)); /* enable FIFOs */
  399. u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
  400. if (u == c_uart_16450) {
  401. outb(0x5a, SCR(iobase));
  402. b1 = inb(SCR(iobase));
  403. outb(0xa5, SCR(iobase));
  404. b2 = inb(SCR(iobase));
  405. if ((b1 != 0x5a) || (b2 != 0xa5))
  406. u = c_uart_8250;
  407. }
  408. return u;
  409. }
  410. /******************************************************************************
  411. * Rx Section
  412. ******************************************************************************/
  413. static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp)
  414. {
  415. if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) {
  416. int pkt_len = yp->rx_len - 2 + 1; /* -CRC + kiss */
  417. struct sk_buff *skb;
  418. if ((yp->rx_crch & yp->rx_crcl) != 0xFF) {
  419. /* Bad crc */
  420. } else {
  421. if (!(skb = dev_alloc_skb(pkt_len))) {
  422. printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
  423. ++yp->stats.rx_dropped;
  424. } else {
  425. unsigned char *cp;
  426. cp = skb_put(skb, pkt_len);
  427. *cp++ = 0; /* KISS kludge */
  428. memcpy(cp, yp->rx_buf, pkt_len - 1);
  429. skb->protocol = ax25_type_trans(skb, dev);
  430. netif_rx(skb);
  431. dev->last_rx = jiffies;
  432. ++yp->stats.rx_packets;
  433. }
  434. }
  435. }
  436. yp->rx_len = 0;
  437. yp->rx_crcl = 0x21;
  438. yp->rx_crch = 0xf3;
  439. }
  440. static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb)
  441. {
  442. if (yp->rx_len < YAM_MAX_FRAME) {
  443. unsigned char c = yp->rx_crcl;
  444. yp->rx_crcl = (chktabl[c] ^ yp->rx_crch);
  445. yp->rx_crch = (chktabh[c] ^ rxb);
  446. yp->rx_buf[yp->rx_len++] = rxb;
  447. }
  448. }
  449. /********************************************************************************
  450. * TX Section
  451. ********************************************************************************/
  452. static void ptt_on(struct net_device *dev)
  453. {
  454. outb(PTT_ON, MCR(dev->base_addr));
  455. }
  456. static void ptt_off(struct net_device *dev)
  457. {
  458. outb(PTT_OFF, MCR(dev->base_addr));
  459. }
  460. static int yam_send_packet(struct sk_buff *skb, struct net_device *dev)
  461. {
  462. struct yam_port *yp = netdev_priv(dev);
  463. skb_queue_tail(&yp->send_queue, skb);
  464. dev->trans_start = jiffies;
  465. return 0;
  466. }
  467. static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
  468. {
  469. if ((yp->tx_state == TX_TAIL) || (yp->txd == 0))
  470. yp->tx_count = 1;
  471. else
  472. yp->tx_count = (yp->bitrate * yp->txd) / 8000;
  473. yp->tx_state = TX_HEAD;
  474. ptt_on(dev);
  475. }
  476. static void yam_arbitrate(struct net_device *dev)
  477. {
  478. struct yam_port *yp = netdev_priv(dev);
  479. if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF ||
  480. skb_queue_empty(&yp->send_queue))
  481. return;
  482. /* tx_state is TX_OFF and there is data to send */
  483. if (yp->dupmode) {
  484. /* Full duplex mode, don't wait */
  485. yam_start_tx(dev, yp);
  486. return;
  487. }
  488. if (yp->dcd) {
  489. /* DCD on, wait slotime ... */
  490. yp->slotcnt = yp->slot / 10;
  491. return;
  492. }
  493. /* Is slottime passed ? */
  494. if ((--yp->slotcnt) > 0)
  495. return;
  496. yp->slotcnt = yp->slot / 10;
  497. /* is random > persist ? */
  498. if ((random32() % 256) > yp->pers)
  499. return;
  500. yam_start_tx(dev, yp);
  501. }
  502. static void yam_dotimer(unsigned long dummy)
  503. {
  504. int i;
  505. for (i = 0; i < NR_PORTS; i++) {
  506. struct net_device *dev = yam_devs[i];
  507. if (dev && netif_running(dev))
  508. yam_arbitrate(dev);
  509. }
  510. yam_timer.expires = jiffies + HZ / 100;
  511. add_timer(&yam_timer);
  512. }
  513. static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
  514. {
  515. struct sk_buff *skb;
  516. unsigned char b, temp;
  517. switch (yp->tx_state) {
  518. case TX_OFF:
  519. break;
  520. case TX_HEAD:
  521. if (--yp->tx_count <= 0) {
  522. if (!(skb = skb_dequeue(&yp->send_queue))) {
  523. ptt_off(dev);
  524. yp->tx_state = TX_OFF;
  525. break;
  526. }
  527. yp->tx_state = TX_DATA;
  528. if (skb->data[0] != 0) {
  529. /* do_kiss_params(s, skb->data, skb->len); */
  530. dev_kfree_skb_any(skb);
  531. break;
  532. }
  533. yp->tx_len = skb->len - 1; /* strip KISS byte */
  534. if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
  535. dev_kfree_skb_any(skb);
  536. break;
  537. }
  538. memcpy(yp->tx_buf, skb->data + 1, yp->tx_len);
  539. dev_kfree_skb_any(skb);
  540. yp->tx_count = 0;
  541. yp->tx_crcl = 0x21;
  542. yp->tx_crch = 0xf3;
  543. yp->tx_state = TX_DATA;
  544. }
  545. break;
  546. case TX_DATA:
  547. b = yp->tx_buf[yp->tx_count++];
  548. outb(b, THR(dev->base_addr));
  549. temp = yp->tx_crcl;
  550. yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
  551. yp->tx_crch = chktabh[temp] ^ b;
  552. if (yp->tx_count >= yp->tx_len) {
  553. yp->tx_state = TX_CRC1;
  554. }
  555. break;
  556. case TX_CRC1:
  557. yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
  558. yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
  559. outb(yp->tx_crcl, THR(dev->base_addr));
  560. yp->tx_state = TX_CRC2;
  561. break;
  562. case TX_CRC2:
  563. outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
  564. if (skb_queue_empty(&yp->send_queue)) {
  565. yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
  566. if (yp->dupmode == 2)
  567. yp->tx_count += (yp->bitrate * yp->holdd) / 8;
  568. if (yp->tx_count == 0)
  569. yp->tx_count = 1;
  570. yp->tx_state = TX_TAIL;
  571. } else {
  572. yp->tx_count = 1;
  573. yp->tx_state = TX_HEAD;
  574. }
  575. ++yp->stats.tx_packets;
  576. break;
  577. case TX_TAIL:
  578. if (--yp->tx_count <= 0) {
  579. yp->tx_state = TX_OFF;
  580. ptt_off(dev);
  581. }
  582. break;
  583. }
  584. }
  585. /***********************************************************************************
  586. * ISR routine
  587. ************************************************************************************/
  588. static irqreturn_t yam_interrupt(int irq, void *dev_id)
  589. {
  590. struct net_device *dev;
  591. struct yam_port *yp;
  592. unsigned char iir;
  593. int counter = 100;
  594. int i;
  595. int handled = 0;
  596. for (i = 0; i < NR_PORTS; i++) {
  597. dev = yam_devs[i];
  598. yp = netdev_priv(dev);
  599. if (!netif_running(dev))
  600. continue;
  601. while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) {
  602. unsigned char msr = inb(MSR(dev->base_addr));
  603. unsigned char lsr = inb(LSR(dev->base_addr));
  604. unsigned char rxb;
  605. handled = 1;
  606. if (lsr & LSR_OE)
  607. ++yp->stats.rx_fifo_errors;
  608. yp->dcd = (msr & RX_DCD) ? 1 : 0;
  609. if (--counter <= 0) {
  610. printk(KERN_ERR "%s: too many irq iir=%d\n",
  611. dev->name, iir);
  612. goto out;
  613. }
  614. if (msr & TX_RDY) {
  615. ++yp->nb_mdint;
  616. yam_tx_byte(dev, yp);
  617. }
  618. if (lsr & LSR_RXC) {
  619. ++yp->nb_rxint;
  620. rxb = inb(RBR(dev->base_addr));
  621. if (msr & RX_FLAG)
  622. yam_rx_flag(dev, yp);
  623. else
  624. yam_rx_byte(dev, yp, rxb);
  625. }
  626. }
  627. }
  628. out:
  629. return IRQ_RETVAL(handled);
  630. }
  631. #ifdef CONFIG_PROC_FS
  632. static void *yam_seq_start(struct seq_file *seq, loff_t *pos)
  633. {
  634. return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
  635. }
  636. static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos)
  637. {
  638. ++*pos;
  639. return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
  640. }
  641. static void yam_seq_stop(struct seq_file *seq, void *v)
  642. {
  643. }
  644. static int yam_seq_show(struct seq_file *seq, void *v)
  645. {
  646. struct net_device *dev = v;
  647. const struct yam_port *yp = netdev_priv(dev);
  648. seq_printf(seq, "Device %s\n", dev->name);
  649. seq_printf(seq, " Up %d\n", netif_running(dev));
  650. seq_printf(seq, " Speed %u\n", yp->bitrate);
  651. seq_printf(seq, " IoBase 0x%x\n", yp->iobase);
  652. seq_printf(seq, " BaudRate %u\n", yp->baudrate);
  653. seq_printf(seq, " IRQ %u\n", yp->irq);
  654. seq_printf(seq, " TxState %u\n", yp->tx_state);
  655. seq_printf(seq, " Duplex %u\n", yp->dupmode);
  656. seq_printf(seq, " HoldDly %u\n", yp->holdd);
  657. seq_printf(seq, " TxDelay %u\n", yp->txd);
  658. seq_printf(seq, " TxTail %u\n", yp->txtail);
  659. seq_printf(seq, " SlotTime %u\n", yp->slot);
  660. seq_printf(seq, " Persist %u\n", yp->pers);
  661. seq_printf(seq, " TxFrames %lu\n", yp->stats.tx_packets);
  662. seq_printf(seq, " RxFrames %lu\n", yp->stats.rx_packets);
  663. seq_printf(seq, " TxInt %u\n", yp->nb_mdint);
  664. seq_printf(seq, " RxInt %u\n", yp->nb_rxint);
  665. seq_printf(seq, " RxOver %lu\n", yp->stats.rx_fifo_errors);
  666. seq_printf(seq, "\n");
  667. return 0;
  668. }
  669. static struct seq_operations yam_seqops = {
  670. .start = yam_seq_start,
  671. .next = yam_seq_next,
  672. .stop = yam_seq_stop,
  673. .show = yam_seq_show,
  674. };
  675. static int yam_info_open(struct inode *inode, struct file *file)
  676. {
  677. return seq_open(file, &yam_seqops);
  678. }
  679. static const struct file_operations yam_info_fops = {
  680. .owner = THIS_MODULE,
  681. .open = yam_info_open,
  682. .read = seq_read,
  683. .llseek = seq_lseek,
  684. .release = seq_release,
  685. };
  686. #endif
  687. /* --------------------------------------------------------------------- */
  688. static struct net_device_stats *yam_get_stats(struct net_device *dev)
  689. {
  690. struct yam_port *yp;
  691. if (!dev)
  692. return NULL;
  693. yp = netdev_priv(dev);
  694. if (yp->magic != YAM_MAGIC)
  695. return NULL;
  696. /*
  697. * Get the current statistics. This may be called with the
  698. * card open or closed.
  699. */
  700. return &yp->stats;
  701. }
  702. /* --------------------------------------------------------------------- */
  703. static int yam_open(struct net_device *dev)
  704. {
  705. struct yam_port *yp = netdev_priv(dev);
  706. enum uart u;
  707. int i;
  708. int ret=0;
  709. printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq);
  710. if (!dev || !yp->bitrate)
  711. return -ENXIO;
  712. if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT ||
  713. dev->irq < 2 || dev->irq > 15) {
  714. return -ENXIO;
  715. }
  716. if (!request_region(dev->base_addr, YAM_EXTENT, dev->name))
  717. {
  718. printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr);
  719. return -EACCES;
  720. }
  721. if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) {
  722. printk(KERN_ERR "%s: cannot find uart type\n", dev->name);
  723. ret = -EIO;
  724. goto out_release_base;
  725. }
  726. if (fpga_download(dev->base_addr, yp->bitrate)) {
  727. printk(KERN_ERR "%s: cannot init FPGA\n", dev->name);
  728. ret = -EIO;
  729. goto out_release_base;
  730. }
  731. outb(0, IER(dev->base_addr));
  732. if (request_irq(dev->irq, yam_interrupt, IRQF_DISABLED | IRQF_SHARED, dev->name, dev)) {
  733. printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
  734. ret = -EBUSY;
  735. goto out_release_base;
  736. }
  737. yam_set_uart(dev);
  738. netif_start_queue(dev);
  739. yp->slotcnt = yp->slot / 10;
  740. /* Reset overruns for all ports - FPGA programming makes overruns */
  741. for (i = 0; i < NR_PORTS; i++) {
  742. struct net_device *dev = yam_devs[i];
  743. struct yam_port *yp = netdev_priv(dev);
  744. inb(LSR(dev->base_addr));
  745. yp->stats.rx_fifo_errors = 0;
  746. }
  747. printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
  748. uart_str[u]);
  749. return 0;
  750. out_release_base:
  751. release_region(dev->base_addr, YAM_EXTENT);
  752. return ret;
  753. }
  754. /* --------------------------------------------------------------------- */
  755. static int yam_close(struct net_device *dev)
  756. {
  757. struct sk_buff *skb;
  758. struct yam_port *yp = netdev_priv(dev);
  759. if (!dev)
  760. return -EINVAL;
  761. /*
  762. * disable interrupts
  763. */
  764. outb(0, IER(dev->base_addr));
  765. outb(1, MCR(dev->base_addr));
  766. /* Remove IRQ handler if last */
  767. free_irq(dev->irq,dev);
  768. release_region(dev->base_addr, YAM_EXTENT);
  769. netif_stop_queue(dev);
  770. while ((skb = skb_dequeue(&yp->send_queue)))
  771. dev_kfree_skb(skb);
  772. printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n",
  773. yam_drvname, dev->base_addr, dev->irq);
  774. return 0;
  775. }
  776. /* --------------------------------------------------------------------- */
  777. static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
  778. {
  779. struct yam_port *yp = netdev_priv(dev);
  780. struct yamdrv_ioctl_cfg yi;
  781. struct yamdrv_ioctl_mcs *ym;
  782. int ioctl_cmd;
  783. if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int)))
  784. return -EFAULT;
  785. if (yp->magic != YAM_MAGIC)
  786. return -EINVAL;
  787. if (!capable(CAP_NET_ADMIN))
  788. return -EPERM;
  789. if (cmd != SIOCDEVPRIVATE)
  790. return -EINVAL;
  791. switch (ioctl_cmd) {
  792. case SIOCYAMRESERVED:
  793. return -EINVAL; /* unused */
  794. case SIOCYAMSMCS:
  795. if (netif_running(dev))
  796. return -EINVAL; /* Cannot change this parameter when up */
  797. if ((ym = kmalloc(sizeof(struct yamdrv_ioctl_mcs), GFP_KERNEL)) == NULL)
  798. return -ENOBUFS;
  799. ym->bitrate = 9600;
  800. if (copy_from_user(ym, ifr->ifr_data, sizeof(struct yamdrv_ioctl_mcs))) {
  801. kfree(ym);
  802. return -EFAULT;
  803. }
  804. if (ym->bitrate > YAM_MAXBITRATE) {
  805. kfree(ym);
  806. return -EINVAL;
  807. }
  808. add_mcs(ym->bits, ym->bitrate);
  809. kfree(ym);
  810. break;
  811. case SIOCYAMSCFG:
  812. if (!capable(CAP_SYS_RAWIO))
  813. return -EPERM;
  814. if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg)))
  815. return -EFAULT;
  816. if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev))
  817. return -EINVAL; /* Cannot change this parameter when up */
  818. if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev))
  819. return -EINVAL; /* Cannot change this parameter when up */
  820. if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev))
  821. return -EINVAL; /* Cannot change this parameter when up */
  822. if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev))
  823. return -EINVAL; /* Cannot change this parameter when up */
  824. if (yi.cfg.mask & YAM_IOBASE) {
  825. yp->iobase = yi.cfg.iobase;
  826. dev->base_addr = yi.cfg.iobase;
  827. }
  828. if (yi.cfg.mask & YAM_IRQ) {
  829. if (yi.cfg.irq > 15)
  830. return -EINVAL;
  831. yp->irq = yi.cfg.irq;
  832. dev->irq = yi.cfg.irq;
  833. }
  834. if (yi.cfg.mask & YAM_BITRATE) {
  835. if (yi.cfg.bitrate > YAM_MAXBITRATE)
  836. return -EINVAL;
  837. yp->bitrate = yi.cfg.bitrate;
  838. }
  839. if (yi.cfg.mask & YAM_BAUDRATE) {
  840. if (yi.cfg.baudrate > YAM_MAXBAUDRATE)
  841. return -EINVAL;
  842. yp->baudrate = yi.cfg.baudrate;
  843. }
  844. if (yi.cfg.mask & YAM_MODE) {
  845. if (yi.cfg.mode > YAM_MAXMODE)
  846. return -EINVAL;
  847. yp->dupmode = yi.cfg.mode;
  848. }
  849. if (yi.cfg.mask & YAM_HOLDDLY) {
  850. if (yi.cfg.holddly > YAM_MAXHOLDDLY)
  851. return -EINVAL;
  852. yp->holdd = yi.cfg.holddly;
  853. }
  854. if (yi.cfg.mask & YAM_TXDELAY) {
  855. if (yi.cfg.txdelay > YAM_MAXTXDELAY)
  856. return -EINVAL;
  857. yp->txd = yi.cfg.txdelay;
  858. }
  859. if (yi.cfg.mask & YAM_TXTAIL) {
  860. if (yi.cfg.txtail > YAM_MAXTXTAIL)
  861. return -EINVAL;
  862. yp->txtail = yi.cfg.txtail;
  863. }
  864. if (yi.cfg.mask & YAM_PERSIST) {
  865. if (yi.cfg.persist > YAM_MAXPERSIST)
  866. return -EINVAL;
  867. yp->pers = yi.cfg.persist;
  868. }
  869. if (yi.cfg.mask & YAM_SLOTTIME) {
  870. if (yi.cfg.slottime > YAM_MAXSLOTTIME)
  871. return -EINVAL;
  872. yp->slot = yi.cfg.slottime;
  873. yp->slotcnt = yp->slot / 10;
  874. }
  875. break;
  876. case SIOCYAMGCFG:
  877. yi.cfg.mask = 0xffffffff;
  878. yi.cfg.iobase = yp->iobase;
  879. yi.cfg.irq = yp->irq;
  880. yi.cfg.bitrate = yp->bitrate;
  881. yi.cfg.baudrate = yp->baudrate;
  882. yi.cfg.mode = yp->dupmode;
  883. yi.cfg.txdelay = yp->txd;
  884. yi.cfg.holddly = yp->holdd;
  885. yi.cfg.txtail = yp->txtail;
  886. yi.cfg.persist = yp->pers;
  887. yi.cfg.slottime = yp->slot;
  888. if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg)))
  889. return -EFAULT;
  890. break;
  891. default:
  892. return -EINVAL;
  893. }
  894. return 0;
  895. }
  896. /* --------------------------------------------------------------------- */
  897. static int yam_set_mac_address(struct net_device *dev, void *addr)
  898. {
  899. struct sockaddr *sa = (struct sockaddr *) addr;
  900. /* addr is an AX.25 shifted ASCII mac address */
  901. memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
  902. return 0;
  903. }
  904. /* --------------------------------------------------------------------- */
  905. static void yam_setup(struct net_device *dev)
  906. {
  907. struct yam_port *yp = netdev_priv(dev);
  908. yp->magic = YAM_MAGIC;
  909. yp->bitrate = DEFAULT_BITRATE;
  910. yp->baudrate = DEFAULT_BITRATE * 2;
  911. yp->iobase = 0;
  912. yp->irq = 0;
  913. yp->dupmode = 0;
  914. yp->holdd = DEFAULT_HOLDD;
  915. yp->txd = DEFAULT_TXD;
  916. yp->txtail = DEFAULT_TXTAIL;
  917. yp->slot = DEFAULT_SLOT;
  918. yp->pers = DEFAULT_PERS;
  919. yp->dev = dev;
  920. dev->base_addr = yp->iobase;
  921. dev->irq = yp->irq;
  922. dev->open = yam_open;
  923. dev->stop = yam_close;
  924. dev->do_ioctl = yam_ioctl;
  925. dev->hard_start_xmit = yam_send_packet;
  926. dev->get_stats = yam_get_stats;
  927. skb_queue_head_init(&yp->send_queue);
  928. dev->hard_header = ax25_hard_header;
  929. dev->rebuild_header = ax25_rebuild_header;
  930. dev->set_mac_address = yam_set_mac_address;
  931. dev->type = ARPHRD_AX25;
  932. dev->hard_header_len = AX25_MAX_HEADER_LEN;
  933. dev->mtu = AX25_MTU;
  934. dev->addr_len = AX25_ADDR_LEN;
  935. memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
  936. memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
  937. }
  938. static int __init yam_init_driver(void)
  939. {
  940. struct net_device *dev;
  941. int i, err;
  942. char name[IFNAMSIZ];
  943. printk(yam_drvinfo);
  944. for (i = 0; i < NR_PORTS; i++) {
  945. sprintf(name, "yam%d", i);
  946. dev = alloc_netdev(sizeof(struct yam_port), name,
  947. yam_setup);
  948. if (!dev) {
  949. printk(KERN_ERR "yam: cannot allocate net device %s\n",
  950. dev->name);
  951. err = -ENOMEM;
  952. goto error;
  953. }
  954. err = register_netdev(dev);
  955. if (err) {
  956. printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name);
  957. goto error;
  958. }
  959. yam_devs[i] = dev;
  960. }
  961. yam_timer.function = yam_dotimer;
  962. yam_timer.expires = jiffies + HZ / 100;
  963. add_timer(&yam_timer);
  964. proc_net_fops_create("yam", S_IRUGO, &yam_info_fops);
  965. return 0;
  966. error:
  967. while (--i >= 0) {
  968. unregister_netdev(yam_devs[i]);
  969. free_netdev(yam_devs[i]);
  970. }
  971. return err;
  972. }
  973. /* --------------------------------------------------------------------- */
  974. static void __exit yam_cleanup_driver(void)
  975. {
  976. struct yam_mcs *p;
  977. int i;
  978. del_timer(&yam_timer);
  979. for (i = 0; i < NR_PORTS; i++) {
  980. struct net_device *dev = yam_devs[i];
  981. if (dev) {
  982. unregister_netdev(dev);
  983. free_netdev(dev);
  984. }
  985. }
  986. while (yam_data) {
  987. p = yam_data;
  988. yam_data = yam_data->next;
  989. kfree(p);
  990. }
  991. proc_net_remove("yam");
  992. }
  993. /* --------------------------------------------------------------------- */
  994. MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr");
  995. MODULE_DESCRIPTION("Yam amateur radio modem driver");
  996. MODULE_LICENSE("GPL");
  997. module_init(yam_init_driver);
  998. module_exit(yam_cleanup_driver);
  999. /* --------------------------------------------------------------------- */