rx1950_uda1380.c 7.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299
  1. /*
  2. * rx1950.c -- ALSA Soc Audio Layer
  3. *
  4. * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
  5. *
  6. * Based on smdk2440.c and magician.c
  7. *
  8. * Authors: Graeme Gregory graeme.gregory@wolfsonmicro.com
  9. * Philipp Zabel <philipp.zabel@gmail.com>
  10. * Denis Grigoriev <dgreenday@gmail.com>
  11. * Vasily Khoruzhick <anarsoul@gmail.com>
  12. *
  13. * This program is free software; you can redistribute it and/or modify it
  14. * under the terms of the GNU General Public License as published by the
  15. * Free Software Foundation; either version 2 of the License, or (at your
  16. * option) any later version.
  17. *
  18. */
  19. #include <linux/types.h>
  20. #include <linux/gpio.h>
  21. #include <sound/soc.h>
  22. #include <sound/jack.h>
  23. #include <plat/regs-iis.h>
  24. #include <asm/mach-types.h>
  25. #include "s3c24xx-i2s.h"
  26. static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
  27. static int rx1950_startup(struct snd_pcm_substream *substream);
  28. static int rx1950_hw_params(struct snd_pcm_substream *substream,
  29. struct snd_pcm_hw_params *params);
  30. static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
  31. struct snd_kcontrol *kcontrol, int event);
  32. static unsigned int rates[] = {
  33. 16000,
  34. 44100,
  35. 48000,
  36. };
  37. static struct snd_pcm_hw_constraint_list hw_rates = {
  38. .count = ARRAY_SIZE(rates),
  39. .list = rates,
  40. .mask = 0,
  41. };
  42. static struct snd_soc_jack hp_jack;
  43. static struct snd_soc_jack_pin hp_jack_pins[] = {
  44. {
  45. .pin = "Headphone Jack",
  46. .mask = SND_JACK_HEADPHONE,
  47. },
  48. {
  49. .pin = "Speaker",
  50. .mask = SND_JACK_HEADPHONE,
  51. .invert = 1,
  52. },
  53. };
  54. static struct snd_soc_jack_gpio hp_jack_gpios[] = {
  55. [0] = {
  56. .gpio = S3C2410_GPG(12),
  57. .name = "hp-gpio",
  58. .report = SND_JACK_HEADPHONE,
  59. .invert = 1,
  60. .debounce_time = 200,
  61. },
  62. };
  63. static struct snd_soc_ops rx1950_ops = {
  64. .startup = rx1950_startup,
  65. .hw_params = rx1950_hw_params,
  66. };
  67. /* s3c24xx digital audio interface glue - connects codec <--> CPU */
  68. static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
  69. {
  70. .name = "uda1380",
  71. .stream_name = "UDA1380 Duplex",
  72. .cpu_dai_name = "s3c24xx-iis",
  73. .codec_dai_name = "uda1380-hifi",
  74. .init = rx1950_uda1380_init,
  75. .platform_name = "samsung-audio",
  76. .codec_name = "uda1380-codec.0-001a",
  77. .ops = &rx1950_ops,
  78. },
  79. };
  80. /* rx1950 machine dapm widgets */
  81. static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
  82. SND_SOC_DAPM_HP("Headphone Jack", NULL),
  83. SND_SOC_DAPM_MIC("Mic Jack", NULL),
  84. SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power),
  85. };
  86. /* rx1950 machine audio_map */
  87. static const struct snd_soc_dapm_route audio_map[] = {
  88. /* headphone connected to VOUTLHP, VOUTRHP */
  89. {"Headphone Jack", NULL, "VOUTLHP"},
  90. {"Headphone Jack", NULL, "VOUTRHP"},
  91. /* ext speaker connected to VOUTL, VOUTR */
  92. {"Speaker", NULL, "VOUTL"},
  93. {"Speaker", NULL, "VOUTR"},
  94. /* mic is connected to VINM */
  95. {"VINM", NULL, "Mic Jack"},
  96. };
  97. static struct snd_soc_card rx1950_asoc = {
  98. .name = "rx1950",
  99. .dai_link = rx1950_uda1380_dai,
  100. .num_links = ARRAY_SIZE(rx1950_uda1380_dai),
  101. .dapm_widgets = uda1380_dapm_widgets,
  102. .num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets),
  103. .dapm_routes = audio_map,
  104. .num_dapm_routes = ARRAY_SIZE(audio_map),
  105. };
  106. static struct platform_device *s3c24xx_snd_device;
  107. static int rx1950_startup(struct snd_pcm_substream *substream)
  108. {
  109. struct snd_pcm_runtime *runtime = substream->runtime;
  110. runtime->hw.rate_min = hw_rates.list[0];
  111. runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1];
  112. runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
  113. return snd_pcm_hw_constraint_list(runtime, 0,
  114. SNDRV_PCM_HW_PARAM_RATE,
  115. &hw_rates);
  116. }
  117. static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
  118. struct snd_kcontrol *kcontrol, int event)
  119. {
  120. if (SND_SOC_DAPM_EVENT_ON(event))
  121. gpio_set_value(S3C2410_GPA(1), 1);
  122. else
  123. gpio_set_value(S3C2410_GPA(1), 0);
  124. return 0;
  125. }
  126. static int rx1950_hw_params(struct snd_pcm_substream *substream,
  127. struct snd_pcm_hw_params *params)
  128. {
  129. struct snd_soc_pcm_runtime *rtd = substream->private_data;
  130. struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
  131. struct snd_soc_dai *codec_dai = rtd->codec_dai;
  132. int div;
  133. int ret;
  134. unsigned int rate = params_rate(params);
  135. int clk_source, fs_mode;
  136. switch (rate) {
  137. case 16000:
  138. case 48000:
  139. clk_source = S3C24XX_CLKSRC_PCLK;
  140. fs_mode = S3C2410_IISMOD_256FS;
  141. div = s3c24xx_i2s_get_clockrate() / (256 * rate);
  142. if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate))
  143. div++;
  144. break;
  145. case 44100:
  146. case 88200:
  147. clk_source = S3C24XX_CLKSRC_MPLL;
  148. fs_mode = S3C2410_IISMOD_384FS;
  149. div = 1;
  150. break;
  151. default:
  152. printk(KERN_ERR "%s: rate %d is not supported\n",
  153. __func__, rate);
  154. return -EINVAL;
  155. }
  156. /* set codec DAI configuration */
  157. ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
  158. SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
  159. if (ret < 0)
  160. return ret;
  161. /* set cpu DAI configuration */
  162. ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
  163. SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
  164. if (ret < 0)
  165. return ret;
  166. /* select clock source */
  167. ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate,
  168. SND_SOC_CLOCK_OUT);
  169. if (ret < 0)
  170. return ret;
  171. /* set MCLK division for sample rate */
  172. ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
  173. fs_mode);
  174. if (ret < 0)
  175. return ret;
  176. /* set BCLK division for sample rate */
  177. ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
  178. S3C2410_IISMOD_32FS);
  179. if (ret < 0)
  180. return ret;
  181. /* set prescaler division for sample rate */
  182. ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
  183. S3C24XX_PRESCALE(div, div));
  184. if (ret < 0)
  185. return ret;
  186. return 0;
  187. }
  188. static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
  189. {
  190. struct snd_soc_codec *codec = rtd->codec;
  191. struct snd_soc_dapm_context *dapm = &codec->dapm;
  192. int err;
  193. snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
  194. snd_soc_dapm_enable_pin(dapm, "Speaker");
  195. snd_soc_dapm_enable_pin(dapm, "Mic Jack");
  196. snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
  197. &hp_jack);
  198. snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
  199. hp_jack_pins);
  200. snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
  201. hp_jack_gpios);
  202. return 0;
  203. }
  204. static int __init rx1950_init(void)
  205. {
  206. int ret;
  207. if (!machine_is_rx1950())
  208. return -ENODEV;
  209. /* configure some gpios */
  210. ret = gpio_request(S3C2410_GPA(1), "speaker-power");
  211. if (ret)
  212. goto err_gpio;
  213. ret = gpio_direction_output(S3C2410_GPA(1), 0);
  214. if (ret)
  215. goto err_gpio_conf;
  216. s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
  217. if (!s3c24xx_snd_device) {
  218. ret = -ENOMEM;
  219. goto err_plat_alloc;
  220. }
  221. platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
  222. ret = platform_device_add(s3c24xx_snd_device);
  223. if (ret) {
  224. platform_device_put(s3c24xx_snd_device);
  225. goto err_plat_add;
  226. }
  227. return 0;
  228. err_plat_add:
  229. err_plat_alloc:
  230. err_gpio_conf:
  231. gpio_free(S3C2410_GPA(1));
  232. err_gpio:
  233. return ret;
  234. }
  235. static void __exit rx1950_exit(void)
  236. {
  237. platform_device_unregister(s3c24xx_snd_device);
  238. snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
  239. hp_jack_gpios);
  240. gpio_free(S3C2410_GPA(1));
  241. }
  242. module_init(rx1950_init);
  243. module_exit(rx1950_exit);
  244. /* Module information */
  245. MODULE_AUTHOR("Vasily Khoruzhick");
  246. MODULE_DESCRIPTION("ALSA SoC RX1950");
  247. MODULE_LICENSE("GPL");