numaq.h 6.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175
  1. /*
  2. * Written by: Patricia Gaughen, IBM Corporation
  3. *
  4. * Copyright (C) 2002, IBM Corp.
  5. *
  6. * All rights reserved.
  7. *
  8. * This program is free software; you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation; either version 2 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful, but
  14. * WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  16. * NON INFRINGEMENT. See the GNU General Public License for more
  17. * details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22. *
  23. * Send feedback to <gone@us.ibm.com>
  24. */
  25. #ifndef _ASM_X86_NUMAQ_H
  26. #define _ASM_X86_NUMAQ_H
  27. #ifdef CONFIG_X86_NUMAQ
  28. extern int found_numaq;
  29. extern int get_memcfg_numaq(void);
  30. extern void *xquad_portio;
  31. #define XQUAD_PORTIO_BASE 0xfe400000
  32. #define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
  33. #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
  34. /*
  35. * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
  36. */
  37. #define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private
  38. quad space */
  39. /*
  40. * Communication area for each processor on lynxer-processor tests.
  41. *
  42. * NOTE: If you change the size of this eachproc structure you need
  43. * to change the definition for EACH_QUAD_SIZE.
  44. */
  45. struct eachquadmem {
  46. unsigned int priv_mem_start; /* Starting address of this */
  47. /* quad's private memory. */
  48. /* This is always 0. */
  49. /* In MB. */
  50. unsigned int priv_mem_size; /* Size of this quad's */
  51. /* private memory. */
  52. /* In MB. */
  53. unsigned int low_shrd_mem_strp_start;/* Starting address of this */
  54. /* quad's low shared block */
  55. /* (untranslated). */
  56. /* In MB. */
  57. unsigned int low_shrd_mem_start; /* Starting address of this */
  58. /* quad's low shared memory */
  59. /* (untranslated). */
  60. /* In MB. */
  61. unsigned int low_shrd_mem_size; /* Size of this quad's low */
  62. /* shared memory. */
  63. /* In MB. */
  64. unsigned int lmmio_copb_start; /* Starting address of this */
  65. /* quad's local memory */
  66. /* mapped I/O in the */
  67. /* compatibility OPB. */
  68. /* In MB. */
  69. unsigned int lmmio_copb_size; /* Size of this quad's local */
  70. /* memory mapped I/O in the */
  71. /* compatibility OPB. */
  72. /* In MB. */
  73. unsigned int lmmio_nopb_start; /* Starting address of this */
  74. /* quad's local memory */
  75. /* mapped I/O in the */
  76. /* non-compatibility OPB. */
  77. /* In MB. */
  78. unsigned int lmmio_nopb_size; /* Size of this quad's local */
  79. /* memory mapped I/O in the */
  80. /* non-compatibility OPB. */
  81. /* In MB. */
  82. unsigned int io_apic_0_start; /* Starting address of I/O */
  83. /* APIC 0. */
  84. unsigned int io_apic_0_sz; /* Size I/O APIC 0. */
  85. unsigned int io_apic_1_start; /* Starting address of I/O */
  86. /* APIC 1. */
  87. unsigned int io_apic_1_sz; /* Size I/O APIC 1. */
  88. unsigned int hi_shrd_mem_start; /* Starting address of this */
  89. /* quad's high shared memory.*/
  90. /* In MB. */
  91. unsigned int hi_shrd_mem_size; /* Size of this quad's high */
  92. /* shared memory. */
  93. /* In MB. */
  94. unsigned int mps_table_addr; /* Address of this quad's */
  95. /* MPS tables from BIOS, */
  96. /* in system space.*/
  97. unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */
  98. /* local access of MDC. */
  99. unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */
  100. /* remote access of MDC. */
  101. unsigned int mm_port_io_start; /* Starting address of this */
  102. /* quad's memory mapped Port */
  103. /* I/O space. */
  104. unsigned int mm_port_io_size; /* Size of this quad's memory*/
  105. /* mapped Port I/O space. */
  106. unsigned int mm_rmt_io_apic_start; /* Starting address of this */
  107. /* quad's memory mapped */
  108. /* remote I/O APIC space. */
  109. unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/
  110. /* mapped remote I/O APIC */
  111. /* space. */
  112. unsigned int mm_isa_start; /* Starting address of this */
  113. /* quad's memory mapped ISA */
  114. /* space (contains MDC */
  115. /* memory space). */
  116. unsigned int mm_isa_size; /* Size of this quad's memory*/
  117. /* mapped ISA space (contains*/
  118. /* MDC memory space). */
  119. unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/
  120. unsigned int lcl_qmi_addr; /* Local addr to access QMI. */
  121. };
  122. /*
  123. * Note: This structure must be NOT be changed unless the multiproc and
  124. * OS are changed to reflect the new structure.
  125. */
  126. struct sys_cfg_data {
  127. unsigned int quad_id;
  128. unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */
  129. unsigned int scd_version; /* Version number of this table. */
  130. unsigned int first_quad_id;
  131. unsigned int quads_present31_0; /* 1 bit for each quad */
  132. unsigned int quads_present63_32; /* 1 bit for each quad */
  133. unsigned int config_flags;
  134. unsigned int boot_flags;
  135. unsigned int csr_start_addr; /* Absolute value (not in MB) */
  136. unsigned int csr_size; /* Absolute value (not in MB) */
  137. unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */
  138. unsigned int lcl_apic_size; /* Absolute value (not in MB) */
  139. unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */
  140. unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
  141. /* may not be totally populated */
  142. unsigned int split_mem_enbl; /* 0 for no low shared memory */
  143. unsigned int mmio_sz; /* Size of total system memory mapped I/O */
  144. /* (in MB). */
  145. unsigned int quad_spin_lock; /* Spare location used for quad */
  146. /* bringup. */
  147. unsigned int nonzero55; /* For checksumming. */
  148. unsigned int nonzeroaa; /* For checksumming. */
  149. unsigned int scd_magic_number;
  150. unsigned int system_type;
  151. unsigned int checksum;
  152. /*
  153. * memory configuration area for each quad
  154. */
  155. struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
  156. };
  157. void numaq_tsc_disable(void);
  158. #else
  159. static inline int get_memcfg_numaq(void)
  160. {
  161. return 0;
  162. }
  163. #endif /* CONFIG_X86_NUMAQ */
  164. #endif /* _ASM_X86_NUMAQ_H */