shpchp_pci.c 3.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117
  1. /*
  2. * Standard Hot Plug Controller Driver
  3. *
  4. * Copyright (C) 1995,2001 Compaq Computer Corporation
  5. * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  6. * Copyright (C) 2001 IBM Corp.
  7. * Copyright (C) 2003-2004 Intel Corporation
  8. *
  9. * All rights reserved.
  10. *
  11. * This program is free software; you can redistribute it and/or modify
  12. * it under the terms of the GNU General Public License as published by
  13. * the Free Software Foundation; either version 2 of the License, or (at
  14. * your option) any later version.
  15. *
  16. * This program is distributed in the hope that it will be useful, but
  17. * WITHOUT ANY WARRANTY; without even the implied warranty of
  18. * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  19. * NON INFRINGEMENT. See the GNU General Public License for more
  20. * details.
  21. *
  22. * You should have received a copy of the GNU General Public License
  23. * along with this program; if not, write to the Free Software
  24. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25. *
  26. * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  27. *
  28. */
  29. #include <linux/module.h>
  30. #include <linux/kernel.h>
  31. #include <linux/types.h>
  32. #include <linux/pci.h>
  33. #include "../pci.h"
  34. #include "shpchp.h"
  35. int __ref shpchp_configure_device(struct slot *p_slot)
  36. {
  37. struct pci_dev *dev;
  38. struct controller *ctrl = p_slot->ctrl;
  39. struct pci_dev *bridge = ctrl->pci_dev;
  40. struct pci_bus *parent = bridge->subordinate;
  41. int num, fn;
  42. dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
  43. if (dev) {
  44. ctrl_err(ctrl, "Device %s already exists "
  45. "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
  46. pci_domain_nr(parent), p_slot->bus, p_slot->device);
  47. pci_dev_put(dev);
  48. return -EINVAL;
  49. }
  50. num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
  51. if (num == 0) {
  52. ctrl_err(ctrl, "No new device found\n");
  53. return -ENODEV;
  54. }
  55. for (fn = 0; fn < 8; fn++) {
  56. dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
  57. if (!dev)
  58. continue;
  59. if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
  60. (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS))
  61. pci_hp_add_bridge(dev);
  62. pci_dev_put(dev);
  63. }
  64. pci_assign_unassigned_bridge_resources(bridge);
  65. for (fn = 0; fn < 8; fn++) {
  66. dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
  67. if (!dev)
  68. continue;
  69. pci_configure_slot(dev);
  70. pci_dev_put(dev);
  71. }
  72. pci_bus_add_devices(parent);
  73. return 0;
  74. }
  75. int shpchp_unconfigure_device(struct slot *p_slot)
  76. {
  77. int rc = 0;
  78. int j;
  79. u8 bctl = 0;
  80. struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
  81. struct controller *ctrl = p_slot->ctrl;
  82. ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
  83. __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
  84. for (j = 0; j < 8 ; j++) {
  85. struct pci_dev *temp = pci_get_slot(parent,
  86. (p_slot->device << 3) | j);
  87. if (!temp)
  88. continue;
  89. if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
  90. pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
  91. if (bctl & PCI_BRIDGE_CTL_VGA) {
  92. ctrl_err(ctrl,
  93. "Cannot remove display device %s\n",
  94. pci_name(temp));
  95. pci_dev_put(temp);
  96. rc = -EINVAL;
  97. break;
  98. }
  99. }
  100. pci_stop_and_remove_bus_device(temp);
  101. pci_dev_put(temp);
  102. }
  103. return rc;
  104. }