cmd.c 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487
  1. #include "cmd.h"
  2. #include <linux/module.h>
  3. #include <linux/slab.h>
  4. #include <linux/crc7.h>
  5. #include "wl1251.h"
  6. #include "reg.h"
  7. #include "io.h"
  8. #include "ps.h"
  9. #include "acx.h"
  10. /**
  11. * send command to firmware
  12. *
  13. * @wl: wl struct
  14. * @id: command id
  15. * @buf: buffer containing the command, must work with dma
  16. * @len: length of the buffer
  17. */
  18. int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
  19. {
  20. struct wl1251_cmd_header *cmd;
  21. unsigned long timeout;
  22. u32 intr;
  23. int ret = 0;
  24. cmd = buf;
  25. cmd->id = id;
  26. cmd->status = 0;
  27. WARN_ON(len % 4 != 0);
  28. wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
  29. wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
  30. timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
  31. intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  32. while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
  33. if (time_after(jiffies, timeout)) {
  34. wl1251_error("command complete timeout");
  35. ret = -ETIMEDOUT;
  36. goto out;
  37. }
  38. msleep(1);
  39. intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  40. }
  41. wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
  42. WL1251_ACX_INTR_CMD_COMPLETE);
  43. out:
  44. return ret;
  45. }
  46. /**
  47. * send test command to firmware
  48. *
  49. * @wl: wl struct
  50. * @buf: buffer containing the command, with all headers, must work with dma
  51. * @len: length of the buffer
  52. * @answer: is answer needed
  53. */
  54. int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
  55. {
  56. int ret;
  57. wl1251_debug(DEBUG_CMD, "cmd test");
  58. ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
  59. if (ret < 0) {
  60. wl1251_warning("TEST command failed");
  61. return ret;
  62. }
  63. if (answer) {
  64. struct wl1251_command *cmd_answer;
  65. /*
  66. * The test command got in, we can read the answer.
  67. * The answer would be a wl1251_command, where the
  68. * parameter array contains the actual answer.
  69. */
  70. wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
  71. cmd_answer = buf;
  72. if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
  73. wl1251_error("TEST command answer error: %d",
  74. cmd_answer->header.status);
  75. }
  76. return 0;
  77. }
  78. /**
  79. * read acx from firmware
  80. *
  81. * @wl: wl struct
  82. * @id: acx id
  83. * @buf: buffer for the response, including all headers, must work with dma
  84. * @len: length of buf
  85. */
  86. int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
  87. {
  88. struct acx_header *acx = buf;
  89. int ret;
  90. wl1251_debug(DEBUG_CMD, "cmd interrogate");
  91. acx->id = id;
  92. /* payload length, does not include any headers */
  93. acx->len = len - sizeof(*acx);
  94. ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
  95. if (ret < 0) {
  96. wl1251_error("INTERROGATE command failed");
  97. goto out;
  98. }
  99. /* the interrogate command got in, we can read the answer */
  100. wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
  101. acx = buf;
  102. if (acx->cmd.status != CMD_STATUS_SUCCESS)
  103. wl1251_error("INTERROGATE command error: %d",
  104. acx->cmd.status);
  105. out:
  106. return ret;
  107. }
  108. /**
  109. * write acx value to firmware
  110. *
  111. * @wl: wl struct
  112. * @id: acx id
  113. * @buf: buffer containing acx, including all headers, must work with dma
  114. * @len: length of buf
  115. */
  116. int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
  117. {
  118. struct acx_header *acx = buf;
  119. int ret;
  120. wl1251_debug(DEBUG_CMD, "cmd configure");
  121. acx->id = id;
  122. /* payload length, does not include any headers */
  123. acx->len = len - sizeof(*acx);
  124. ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
  125. if (ret < 0) {
  126. wl1251_warning("CONFIGURE command NOK");
  127. return ret;
  128. }
  129. return 0;
  130. }
  131. int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
  132. void *bitmap, u16 bitmap_len, u8 bitmap_control)
  133. {
  134. struct wl1251_cmd_vbm_update *vbm;
  135. int ret;
  136. wl1251_debug(DEBUG_CMD, "cmd vbm");
  137. vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
  138. if (!vbm) {
  139. ret = -ENOMEM;
  140. goto out;
  141. }
  142. /* Count and period will be filled by the target */
  143. vbm->tim.bitmap_ctrl = bitmap_control;
  144. if (bitmap_len > PARTIAL_VBM_MAX) {
  145. wl1251_warning("cmd vbm len is %d B, truncating to %d",
  146. bitmap_len, PARTIAL_VBM_MAX);
  147. bitmap_len = PARTIAL_VBM_MAX;
  148. }
  149. memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
  150. vbm->tim.identity = identity;
  151. vbm->tim.length = bitmap_len + 3;
  152. vbm->len = cpu_to_le16(bitmap_len + 5);
  153. ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
  154. if (ret < 0) {
  155. wl1251_error("VBM command failed");
  156. goto out;
  157. }
  158. out:
  159. kfree(vbm);
  160. return ret;
  161. }
  162. int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
  163. {
  164. struct cmd_enabledisable_path *cmd;
  165. int ret;
  166. u16 cmd_rx, cmd_tx;
  167. wl1251_debug(DEBUG_CMD, "cmd data path");
  168. cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
  169. if (!cmd) {
  170. ret = -ENOMEM;
  171. goto out;
  172. }
  173. cmd->channel = channel;
  174. if (enable) {
  175. cmd_rx = CMD_ENABLE_RX;
  176. cmd_tx = CMD_ENABLE_TX;
  177. } else {
  178. cmd_rx = CMD_DISABLE_RX;
  179. cmd_tx = CMD_DISABLE_TX;
  180. }
  181. ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
  182. if (ret < 0) {
  183. wl1251_error("rx %s cmd for channel %d failed",
  184. enable ? "start" : "stop", channel);
  185. goto out;
  186. }
  187. wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
  188. enable ? "start" : "stop", channel);
  189. ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
  190. if (ret < 0) {
  191. wl1251_error("tx %s cmd for channel %d failed",
  192. enable ? "start" : "stop", channel);
  193. goto out;
  194. }
  195. wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
  196. enable ? "start" : "stop", channel);
  197. out:
  198. kfree(cmd);
  199. return ret;
  200. }
  201. int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
  202. u16 beacon_interval, u8 dtim_interval)
  203. {
  204. struct cmd_join *join;
  205. int ret, i;
  206. u8 *bssid;
  207. join = kzalloc(sizeof(*join), GFP_KERNEL);
  208. if (!join) {
  209. ret = -ENOMEM;
  210. goto out;
  211. }
  212. wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
  213. bss_type == BSS_TYPE_IBSS ? " ibss" : "",
  214. channel, beacon_interval, dtim_interval);
  215. /* Reverse order BSSID */
  216. bssid = (u8 *) &join->bssid_lsb;
  217. for (i = 0; i < ETH_ALEN; i++)
  218. bssid[i] = wl->bssid[ETH_ALEN - i - 1];
  219. join->rx_config_options = wl->rx_config;
  220. join->rx_filter_options = wl->rx_filter;
  221. join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
  222. RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
  223. join->beacon_interval = beacon_interval;
  224. join->dtim_interval = dtim_interval;
  225. join->bss_type = bss_type;
  226. join->channel = channel;
  227. join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
  228. ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
  229. if (ret < 0) {
  230. wl1251_error("failed to initiate cmd join");
  231. goto out;
  232. }
  233. out:
  234. kfree(join);
  235. return ret;
  236. }
  237. int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
  238. {
  239. struct wl1251_cmd_ps_params *ps_params = NULL;
  240. int ret = 0;
  241. wl1251_debug(DEBUG_CMD, "cmd set ps mode");
  242. ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
  243. if (!ps_params) {
  244. ret = -ENOMEM;
  245. goto out;
  246. }
  247. ps_params->ps_mode = ps_mode;
  248. ps_params->send_null_data = 1;
  249. ps_params->retries = 5;
  250. ps_params->hang_over_period = 128;
  251. ps_params->null_data_rate = 1; /* 1 Mbps */
  252. ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
  253. sizeof(*ps_params));
  254. if (ret < 0) {
  255. wl1251_error("cmd set_ps_mode failed");
  256. goto out;
  257. }
  258. out:
  259. kfree(ps_params);
  260. return ret;
  261. }
  262. int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
  263. size_t len)
  264. {
  265. struct cmd_read_write_memory *cmd;
  266. int ret = 0;
  267. wl1251_debug(DEBUG_CMD, "cmd read memory");
  268. cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
  269. if (!cmd) {
  270. ret = -ENOMEM;
  271. goto out;
  272. }
  273. WARN_ON(len > MAX_READ_SIZE);
  274. len = min_t(size_t, len, MAX_READ_SIZE);
  275. cmd->addr = addr;
  276. cmd->size = len;
  277. ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
  278. if (ret < 0) {
  279. wl1251_error("read memory command failed: %d", ret);
  280. goto out;
  281. }
  282. /* the read command got in, we can now read the answer */
  283. wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
  284. if (cmd->header.status != CMD_STATUS_SUCCESS)
  285. wl1251_error("error in read command result: %d",
  286. cmd->header.status);
  287. memcpy(answer, cmd->value, len);
  288. out:
  289. kfree(cmd);
  290. return ret;
  291. }
  292. int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
  293. void *buf, size_t buf_len)
  294. {
  295. struct wl1251_cmd_packet_template *cmd;
  296. size_t cmd_len;
  297. int ret = 0;
  298. wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
  299. WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
  300. buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
  301. cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
  302. cmd = kzalloc(cmd_len, GFP_KERNEL);
  303. if (!cmd) {
  304. ret = -ENOMEM;
  305. goto out;
  306. }
  307. cmd->size = cpu_to_le16(buf_len);
  308. if (buf)
  309. memcpy(cmd->data, buf, buf_len);
  310. ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
  311. if (ret < 0) {
  312. wl1251_warning("cmd set_template failed: %d", ret);
  313. goto out;
  314. }
  315. out:
  316. kfree(cmd);
  317. return ret;
  318. }
  319. int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
  320. struct ieee80211_channel *channels[],
  321. unsigned int n_channels, unsigned int n_probes)
  322. {
  323. struct wl1251_cmd_scan *cmd;
  324. int i, ret = 0;
  325. wl1251_debug(DEBUG_CMD, "cmd scan");
  326. cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
  327. if (!cmd)
  328. return -ENOMEM;
  329. cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
  330. cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
  331. CFG_RX_MGMT_EN |
  332. CFG_RX_BCN_EN);
  333. cmd->params.scan_options = 0;
  334. cmd->params.num_channels = n_channels;
  335. cmd->params.num_probe_requests = n_probes;
  336. cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
  337. cmd->params.tid_trigger = 0;
  338. for (i = 0; i < n_channels; i++) {
  339. cmd->channels[i].min_duration =
  340. cpu_to_le32(WL1251_SCAN_MIN_DURATION);
  341. cmd->channels[i].max_duration =
  342. cpu_to_le32(WL1251_SCAN_MAX_DURATION);
  343. memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
  344. memset(&cmd->channels[i].bssid_msb, 0xff, 2);
  345. cmd->channels[i].early_termination = 0;
  346. cmd->channels[i].tx_power_att = 0;
  347. cmd->channels[i].channel = channels[i]->hw_value;
  348. }
  349. cmd->params.ssid_len = ssid_len;
  350. if (ssid)
  351. memcpy(cmd->params.ssid, ssid, ssid_len);
  352. ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
  353. if (ret < 0) {
  354. wl1251_error("cmd scan failed: %d", ret);
  355. goto out;
  356. }
  357. wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
  358. if (cmd->header.status != CMD_STATUS_SUCCESS) {
  359. wl1251_error("cmd scan status wasn't success: %d",
  360. cmd->header.status);
  361. ret = -EIO;
  362. goto out;
  363. }
  364. out:
  365. kfree(cmd);
  366. return ret;
  367. }
  368. int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
  369. {
  370. struct wl1251_cmd_trigger_scan_to *cmd;
  371. int ret;
  372. wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
  373. cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
  374. if (!cmd)
  375. return -ENOMEM;
  376. cmd->timeout = timeout;
  377. ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
  378. if (ret < 0) {
  379. wl1251_error("cmd trigger scan to failed: %d", ret);
  380. goto out;
  381. }
  382. out:
  383. kfree(cmd);
  384. return ret;
  385. }