mpc85xx_mds.c 4.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211
  1. /*
  2. * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
  3. *
  4. * Author: Andy Fleming <afleming@freescale.com>
  5. *
  6. * Based on 83xx/mpc8360e_pb.c by:
  7. * Li Yang <LeoLi@freescale.com>
  8. * Yin Olivia <Hong-hua.Yin@freescale.com>
  9. *
  10. * Description:
  11. * MPC85xx MDS board specific routines.
  12. *
  13. * This program is free software; you can redistribute it and/or modify it
  14. * under the terms of the GNU General Public License as published by the
  15. * Free Software Foundation; either version 2 of the License, or (at your
  16. * option) any later version.
  17. */
  18. #include <linux/stddef.h>
  19. #include <linux/kernel.h>
  20. #include <linux/init.h>
  21. #include <linux/errno.h>
  22. #include <linux/reboot.h>
  23. #include <linux/pci.h>
  24. #include <linux/kdev_t.h>
  25. #include <linux/major.h>
  26. #include <linux/console.h>
  27. #include <linux/delay.h>
  28. #include <linux/seq_file.h>
  29. #include <linux/initrd.h>
  30. #include <linux/module.h>
  31. #include <linux/fsl_devices.h>
  32. #include <asm/of_device.h>
  33. #include <asm/of_platform.h>
  34. #include <asm/system.h>
  35. #include <asm/atomic.h>
  36. #include <asm/time.h>
  37. #include <asm/io.h>
  38. #include <asm/machdep.h>
  39. #include <asm/pci-bridge.h>
  40. #include <asm/mpc85xx.h>
  41. #include <asm/irq.h>
  42. #include <mm/mmu_decl.h>
  43. #include <asm/prom.h>
  44. #include <asm/udbg.h>
  45. #include <sysdev/fsl_soc.h>
  46. #include <sysdev/fsl_pci.h>
  47. #include <asm/qe.h>
  48. #include <asm/qe_ic.h>
  49. #include <asm/mpic.h>
  50. #undef DEBUG
  51. #ifdef DEBUG
  52. #define DBG(fmt...) udbg_printf(fmt)
  53. #else
  54. #define DBG(fmt...)
  55. #endif
  56. /* ************************************************************************
  57. *
  58. * Setup the architecture
  59. *
  60. */
  61. static void __init mpc85xx_mds_setup_arch(void)
  62. {
  63. struct device_node *np;
  64. static u8 *bcsr_regs = NULL;
  65. if (ppc_md.progress)
  66. ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
  67. /* Map BCSR area */
  68. np = of_find_node_by_name(NULL, "bcsr");
  69. if (np != NULL) {
  70. struct resource res;
  71. of_address_to_resource(np, 0, &res);
  72. bcsr_regs = ioremap(res.start, res.end - res.start +1);
  73. of_node_put(np);
  74. }
  75. #ifdef CONFIG_PCI
  76. for_each_node_by_type(np, "pci") {
  77. if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
  78. of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
  79. struct resource rsrc;
  80. of_address_to_resource(np, 0, &rsrc);
  81. if ((rsrc.start & 0xfffff) == 0x8000)
  82. fsl_add_bridge(np, 1);
  83. else
  84. fsl_add_bridge(np, 0);
  85. }
  86. }
  87. #endif
  88. #ifdef CONFIG_QUICC_ENGINE
  89. if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
  90. qe_reset();
  91. of_node_put(np);
  92. }
  93. if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
  94. struct device_node *ucc = NULL;
  95. par_io_init(np);
  96. of_node_put(np);
  97. for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;)
  98. par_io_of_config(ucc);
  99. of_node_put(ucc);
  100. }
  101. if (bcsr_regs) {
  102. #define BCSR_UCC1_GETH_EN (0x1 << 7)
  103. #define BCSR_UCC2_GETH_EN (0x1 << 7)
  104. #define BCSR_UCC1_MODE_MSK (0x3 << 4)
  105. #define BCSR_UCC2_MODE_MSK (0x3 << 0)
  106. /* Turn off UCC1 & UCC2 */
  107. clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
  108. clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
  109. /* Mode is RGMII, all bits clear */
  110. clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
  111. BCSR_UCC2_MODE_MSK);
  112. /* Turn UCC1 & UCC2 on */
  113. setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
  114. setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
  115. iounmap(bcsr_regs);
  116. }
  117. #endif /* CONFIG_QUICC_ENGINE */
  118. }
  119. static struct of_device_id mpc85xx_ids[] = {
  120. { .type = "soc", },
  121. { .compatible = "soc", },
  122. { .type = "qe", },
  123. {},
  124. };
  125. static int __init mpc85xx_publish_devices(void)
  126. {
  127. if (!machine_is(mpc85xx_mds))
  128. return 0;
  129. /* Publish the QE devices */
  130. of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
  131. return 0;
  132. }
  133. device_initcall(mpc85xx_publish_devices);
  134. static void __init mpc85xx_mds_pic_init(void)
  135. {
  136. struct mpic *mpic;
  137. struct resource r;
  138. struct device_node *np = NULL;
  139. np = of_find_node_by_type(NULL, "open-pic");
  140. if (!np)
  141. return;
  142. if (of_address_to_resource(np, 0, &r)) {
  143. printk(KERN_ERR "Failed to map mpic register space\n");
  144. of_node_put(np);
  145. return;
  146. }
  147. mpic = mpic_alloc(np, r.start,
  148. MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
  149. 0, 256, " OpenPIC ");
  150. BUG_ON(mpic == NULL);
  151. of_node_put(np);
  152. mpic_init(mpic);
  153. #ifdef CONFIG_QUICC_ENGINE
  154. np = of_find_node_by_type(NULL, "qeic");
  155. if (!np)
  156. return;
  157. qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
  158. of_node_put(np);
  159. #endif /* CONFIG_QUICC_ENGINE */
  160. }
  161. static int __init mpc85xx_mds_probe(void)
  162. {
  163. unsigned long root = of_get_flat_dt_root();
  164. return of_flat_dt_is_compatible(root, "MPC85xxMDS");
  165. }
  166. define_machine(mpc85xx_mds) {
  167. .name = "MPC85xx MDS",
  168. .probe = mpc85xx_mds_probe,
  169. .setup_arch = mpc85xx_mds_setup_arch,
  170. .init_IRQ = mpc85xx_mds_pic_init,
  171. .get_irq = mpic_get_irq,
  172. .restart = fsl_rstcr_restart,
  173. .calibrate_decr = generic_calibrate_decr,
  174. .progress = udbg_progress,
  175. #ifdef CONFIG_PCI
  176. .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
  177. #endif
  178. };