iwl-core.c 43 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528
  1. /******************************************************************************
  2. *
  3. * GPL LICENSE SUMMARY
  4. *
  5. * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of version 2 of the GNU General Public License as
  9. * published by the Free Software Foundation.
  10. *
  11. * This program is distributed in the hope that it will be useful, but
  12. * WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  14. * General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  19. * USA
  20. *
  21. * The full GNU General Public License is included in this distribution
  22. * in the file called LICENSE.GPL.
  23. *
  24. * Contact Information:
  25. * Intel Linux Wireless <ilw@linux.intel.com>
  26. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27. *****************************************************************************/
  28. #include <linux/kernel.h>
  29. #include <linux/module.h>
  30. #include <net/mac80211.h>
  31. #include "iwl-eeprom.h"
  32. #include "iwl-dev.h" /* FIXME: remove */
  33. #include "iwl-debug.h"
  34. #include "iwl-core.h"
  35. #include "iwl-io.h"
  36. #include "iwl-rfkill.h"
  37. #include "iwl-power.h"
  38. #include "iwl-sta.h"
  39. MODULE_DESCRIPTION("iwl core");
  40. MODULE_VERSION(IWLWIFI_VERSION);
  41. MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
  42. MODULE_LICENSE("GPL");
  43. #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
  44. [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
  45. IWL_RATE_SISO_##s##M_PLCP, \
  46. IWL_RATE_MIMO2_##s##M_PLCP,\
  47. IWL_RATE_MIMO3_##s##M_PLCP,\
  48. IWL_RATE_##r##M_IEEE, \
  49. IWL_RATE_##ip##M_INDEX, \
  50. IWL_RATE_##in##M_INDEX, \
  51. IWL_RATE_##rp##M_INDEX, \
  52. IWL_RATE_##rn##M_INDEX, \
  53. IWL_RATE_##pp##M_INDEX, \
  54. IWL_RATE_##np##M_INDEX }
  55. /*
  56. * Parameter order:
  57. * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
  58. *
  59. * If there isn't a valid next or previous rate then INV is used which
  60. * maps to IWL_RATE_INVALID
  61. *
  62. */
  63. const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
  64. IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
  65. IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
  66. IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
  67. IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
  68. IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
  69. IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
  70. IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
  71. IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
  72. IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
  73. IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
  74. IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
  75. IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  76. IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
  77. /* FIXME:RS: ^^ should be INV (legacy) */
  78. };
  79. EXPORT_SYMBOL(iwl_rates);
  80. /**
  81. * translate ucode response to mac80211 tx status control values
  82. */
  83. void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
  84. struct ieee80211_tx_info *info)
  85. {
  86. int rate_index;
  87. struct ieee80211_tx_rate *r = &info->control.rates[0];
  88. info->antenna_sel_tx =
  89. ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
  90. if (rate_n_flags & RATE_MCS_HT_MSK)
  91. r->flags |= IEEE80211_TX_RC_MCS;
  92. if (rate_n_flags & RATE_MCS_GF_MSK)
  93. r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
  94. if (rate_n_flags & RATE_MCS_FAT_MSK)
  95. r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
  96. if (rate_n_flags & RATE_MCS_DUP_MSK)
  97. r->flags |= IEEE80211_TX_RC_DUP_DATA;
  98. if (rate_n_flags & RATE_MCS_SGI_MSK)
  99. r->flags |= IEEE80211_TX_RC_SHORT_GI;
  100. rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
  101. if (info->band == IEEE80211_BAND_5GHZ)
  102. rate_index -= IWL_FIRST_OFDM_RATE;
  103. r->idx = rate_index;
  104. }
  105. EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
  106. int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
  107. {
  108. int idx = 0;
  109. /* HT rate format */
  110. if (rate_n_flags & RATE_MCS_HT_MSK) {
  111. idx = (rate_n_flags & 0xff);
  112. if (idx >= IWL_RATE_MIMO3_6M_PLCP)
  113. idx = idx - IWL_RATE_MIMO3_6M_PLCP;
  114. else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
  115. idx = idx - IWL_RATE_MIMO2_6M_PLCP;
  116. idx += IWL_FIRST_OFDM_RATE;
  117. /* skip 9M not supported in ht*/
  118. if (idx >= IWL_RATE_9M_INDEX)
  119. idx += 1;
  120. if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
  121. return idx;
  122. /* legacy rate format, search for match in table */
  123. } else {
  124. for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
  125. if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
  126. return idx;
  127. }
  128. return -1;
  129. }
  130. EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
  131. u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant)
  132. {
  133. int i;
  134. u8 ind = ant;
  135. for (i = 0; i < RATE_ANT_NUM - 1; i++) {
  136. ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
  137. if (priv->hw_params.valid_tx_ant & BIT(ind))
  138. return ind;
  139. }
  140. return ant;
  141. }
  142. const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
  143. EXPORT_SYMBOL(iwl_bcast_addr);
  144. /* This function both allocates and initializes hw and priv. */
  145. struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
  146. struct ieee80211_ops *hw_ops)
  147. {
  148. struct iwl_priv *priv;
  149. /* mac80211 allocates memory for this device instance, including
  150. * space for this driver's private structure */
  151. struct ieee80211_hw *hw =
  152. ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
  153. if (hw == NULL) {
  154. printk(KERN_ERR "%s: Can not allocate network device\n",
  155. cfg->name);
  156. goto out;
  157. }
  158. priv = hw->priv;
  159. priv->hw = hw;
  160. out:
  161. return hw;
  162. }
  163. EXPORT_SYMBOL(iwl_alloc_all);
  164. void iwl_hw_detect(struct iwl_priv *priv)
  165. {
  166. priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
  167. priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
  168. pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
  169. }
  170. EXPORT_SYMBOL(iwl_hw_detect);
  171. int iwl_hw_nic_init(struct iwl_priv *priv)
  172. {
  173. unsigned long flags;
  174. struct iwl_rx_queue *rxq = &priv->rxq;
  175. int ret;
  176. /* nic_init */
  177. spin_lock_irqsave(&priv->lock, flags);
  178. priv->cfg->ops->lib->apm_ops.init(priv);
  179. iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
  180. spin_unlock_irqrestore(&priv->lock, flags);
  181. ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
  182. priv->cfg->ops->lib->apm_ops.config(priv);
  183. /* Allocate the RX queue, or reset if it is already allocated */
  184. if (!rxq->bd) {
  185. ret = iwl_rx_queue_alloc(priv);
  186. if (ret) {
  187. IWL_ERR(priv, "Unable to initialize Rx queue\n");
  188. return -ENOMEM;
  189. }
  190. } else
  191. iwl_rx_queue_reset(priv, rxq);
  192. iwl_rx_replenish(priv);
  193. iwl_rx_init(priv, rxq);
  194. spin_lock_irqsave(&priv->lock, flags);
  195. rxq->need_update = 1;
  196. iwl_rx_queue_update_write_ptr(priv, rxq);
  197. spin_unlock_irqrestore(&priv->lock, flags);
  198. /* Allocate and init all Tx and Command queues */
  199. ret = iwl_txq_ctx_reset(priv);
  200. if (ret)
  201. return ret;
  202. set_bit(STATUS_INIT, &priv->status);
  203. return 0;
  204. }
  205. EXPORT_SYMBOL(iwl_hw_nic_init);
  206. void iwl_reset_qos(struct iwl_priv *priv)
  207. {
  208. u16 cw_min = 15;
  209. u16 cw_max = 1023;
  210. u8 aifs = 2;
  211. bool is_legacy = false;
  212. unsigned long flags;
  213. int i;
  214. spin_lock_irqsave(&priv->lock, flags);
  215. /* QoS always active in AP and ADHOC mode
  216. * In STA mode wait for association
  217. */
  218. if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
  219. priv->iw_mode == NL80211_IFTYPE_AP)
  220. priv->qos_data.qos_active = 1;
  221. else
  222. priv->qos_data.qos_active = 0;
  223. /* check for legacy mode */
  224. if ((priv->iw_mode == NL80211_IFTYPE_ADHOC &&
  225. (priv->active_rate & IWL_OFDM_RATES_MASK) == 0) ||
  226. (priv->iw_mode == NL80211_IFTYPE_STATION &&
  227. (priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK) == 0)) {
  228. cw_min = 31;
  229. is_legacy = 1;
  230. }
  231. if (priv->qos_data.qos_active)
  232. aifs = 3;
  233. priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
  234. priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
  235. priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
  236. priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
  237. priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
  238. if (priv->qos_data.qos_active) {
  239. i = 1;
  240. priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
  241. priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
  242. priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
  243. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  244. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  245. i = 2;
  246. priv->qos_data.def_qos_parm.ac[i].cw_min =
  247. cpu_to_le16((cw_min + 1) / 2 - 1);
  248. priv->qos_data.def_qos_parm.ac[i].cw_max =
  249. cpu_to_le16(cw_max);
  250. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  251. if (is_legacy)
  252. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  253. cpu_to_le16(6016);
  254. else
  255. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  256. cpu_to_le16(3008);
  257. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  258. i = 3;
  259. priv->qos_data.def_qos_parm.ac[i].cw_min =
  260. cpu_to_le16((cw_min + 1) / 4 - 1);
  261. priv->qos_data.def_qos_parm.ac[i].cw_max =
  262. cpu_to_le16((cw_max + 1) / 2 - 1);
  263. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  264. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  265. if (is_legacy)
  266. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  267. cpu_to_le16(3264);
  268. else
  269. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  270. cpu_to_le16(1504);
  271. } else {
  272. for (i = 1; i < 4; i++) {
  273. priv->qos_data.def_qos_parm.ac[i].cw_min =
  274. cpu_to_le16(cw_min);
  275. priv->qos_data.def_qos_parm.ac[i].cw_max =
  276. cpu_to_le16(cw_max);
  277. priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
  278. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  279. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  280. }
  281. }
  282. IWL_DEBUG_QOS("set QoS to default \n");
  283. spin_unlock_irqrestore(&priv->lock, flags);
  284. }
  285. EXPORT_SYMBOL(iwl_reset_qos);
  286. #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
  287. #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
  288. static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
  289. struct ieee80211_sta_ht_cap *ht_info,
  290. enum ieee80211_band band)
  291. {
  292. u16 max_bit_rate = 0;
  293. u8 rx_chains_num = priv->hw_params.rx_chains_num;
  294. u8 tx_chains_num = priv->hw_params.tx_chains_num;
  295. ht_info->cap = 0;
  296. memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
  297. ht_info->ht_supported = true;
  298. ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
  299. ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
  300. ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
  301. (WLAN_HT_CAP_SM_PS_DISABLED << 2));
  302. max_bit_rate = MAX_BIT_RATE_20_MHZ;
  303. if (priv->hw_params.fat_channel & BIT(band)) {
  304. ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
  305. ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
  306. ht_info->mcs.rx_mask[4] = 0x01;
  307. max_bit_rate = MAX_BIT_RATE_40_MHZ;
  308. }
  309. if (priv->cfg->mod_params->amsdu_size_8K)
  310. ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
  311. ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
  312. ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
  313. ht_info->mcs.rx_mask[0] = 0xFF;
  314. if (rx_chains_num >= 2)
  315. ht_info->mcs.rx_mask[1] = 0xFF;
  316. if (rx_chains_num >= 3)
  317. ht_info->mcs.rx_mask[2] = 0xFF;
  318. /* Highest supported Rx data rate */
  319. max_bit_rate *= rx_chains_num;
  320. WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
  321. ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
  322. /* Tx MCS capabilities */
  323. ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
  324. if (tx_chains_num != rx_chains_num) {
  325. ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
  326. ht_info->mcs.tx_params |= ((tx_chains_num - 1) <<
  327. IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
  328. }
  329. }
  330. static void iwlcore_init_hw_rates(struct iwl_priv *priv,
  331. struct ieee80211_rate *rates)
  332. {
  333. int i;
  334. for (i = 0; i < IWL_RATE_COUNT; i++) {
  335. rates[i].bitrate = iwl_rates[i].ieee * 5;
  336. rates[i].hw_value = i; /* Rate scaling will work on indexes */
  337. rates[i].hw_value_short = i;
  338. rates[i].flags = 0;
  339. if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
  340. /*
  341. * If CCK != 1M then set short preamble rate flag.
  342. */
  343. rates[i].flags |=
  344. (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
  345. 0 : IEEE80211_RATE_SHORT_PREAMBLE;
  346. }
  347. }
  348. }
  349. /**
  350. * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
  351. */
  352. static int iwlcore_init_geos(struct iwl_priv *priv)
  353. {
  354. struct iwl_channel_info *ch;
  355. struct ieee80211_supported_band *sband;
  356. struct ieee80211_channel *channels;
  357. struct ieee80211_channel *geo_ch;
  358. struct ieee80211_rate *rates;
  359. int i = 0;
  360. if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
  361. priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
  362. IWL_DEBUG_INFO("Geography modes already initialized.\n");
  363. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  364. return 0;
  365. }
  366. channels = kzalloc(sizeof(struct ieee80211_channel) *
  367. priv->channel_count, GFP_KERNEL);
  368. if (!channels)
  369. return -ENOMEM;
  370. rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
  371. GFP_KERNEL);
  372. if (!rates) {
  373. kfree(channels);
  374. return -ENOMEM;
  375. }
  376. /* 5.2GHz channels start after the 2.4GHz channels */
  377. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  378. sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
  379. /* just OFDM */
  380. sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
  381. sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
  382. if (priv->cfg->sku & IWL_SKU_N)
  383. iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
  384. IEEE80211_BAND_5GHZ);
  385. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  386. sband->channels = channels;
  387. /* OFDM & CCK */
  388. sband->bitrates = rates;
  389. sband->n_bitrates = IWL_RATE_COUNT;
  390. if (priv->cfg->sku & IWL_SKU_N)
  391. iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
  392. IEEE80211_BAND_2GHZ);
  393. priv->ieee_channels = channels;
  394. priv->ieee_rates = rates;
  395. iwlcore_init_hw_rates(priv, rates);
  396. for (i = 0; i < priv->channel_count; i++) {
  397. ch = &priv->channel_info[i];
  398. /* FIXME: might be removed if scan is OK */
  399. if (!is_channel_valid(ch))
  400. continue;
  401. if (is_channel_a_band(ch))
  402. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  403. else
  404. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  405. geo_ch = &sband->channels[sband->n_channels++];
  406. geo_ch->center_freq =
  407. ieee80211_channel_to_frequency(ch->channel);
  408. geo_ch->max_power = ch->max_power_avg;
  409. geo_ch->max_antenna_gain = 0xff;
  410. geo_ch->hw_value = ch->channel;
  411. if (is_channel_valid(ch)) {
  412. if (!(ch->flags & EEPROM_CHANNEL_IBSS))
  413. geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
  414. if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
  415. geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
  416. if (ch->flags & EEPROM_CHANNEL_RADAR)
  417. geo_ch->flags |= IEEE80211_CHAN_RADAR;
  418. geo_ch->flags |= ch->fat_extension_channel;
  419. if (ch->max_power_avg > priv->tx_power_channel_lmt)
  420. priv->tx_power_channel_lmt = ch->max_power_avg;
  421. } else {
  422. geo_ch->flags |= IEEE80211_CHAN_DISABLED;
  423. }
  424. /* Save flags for reg domain usage */
  425. geo_ch->orig_flags = geo_ch->flags;
  426. IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
  427. ch->channel, geo_ch->center_freq,
  428. is_channel_a_band(ch) ? "5.2" : "2.4",
  429. geo_ch->flags & IEEE80211_CHAN_DISABLED ?
  430. "restricted" : "valid",
  431. geo_ch->flags);
  432. }
  433. if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
  434. priv->cfg->sku & IWL_SKU_A) {
  435. IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
  436. "Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
  437. priv->pci_dev->device,
  438. priv->pci_dev->subsystem_device);
  439. priv->cfg->sku &= ~IWL_SKU_A;
  440. }
  441. IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
  442. priv->bands[IEEE80211_BAND_2GHZ].n_channels,
  443. priv->bands[IEEE80211_BAND_5GHZ].n_channels);
  444. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  445. return 0;
  446. }
  447. /*
  448. * iwlcore_free_geos - undo allocations in iwlcore_init_geos
  449. */
  450. static void iwlcore_free_geos(struct iwl_priv *priv)
  451. {
  452. kfree(priv->ieee_channels);
  453. kfree(priv->ieee_rates);
  454. clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
  455. }
  456. static bool is_single_rx_stream(struct iwl_priv *priv)
  457. {
  458. return !priv->current_ht_config.is_ht ||
  459. ((priv->current_ht_config.mcs.rx_mask[1] == 0) &&
  460. (priv->current_ht_config.mcs.rx_mask[2] == 0));
  461. }
  462. static u8 iwl_is_channel_extension(struct iwl_priv *priv,
  463. enum ieee80211_band band,
  464. u16 channel, u8 extension_chan_offset)
  465. {
  466. const struct iwl_channel_info *ch_info;
  467. ch_info = iwl_get_channel_info(priv, band, channel);
  468. if (!is_channel_valid(ch_info))
  469. return 0;
  470. if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
  471. return !(ch_info->fat_extension_channel &
  472. IEEE80211_CHAN_NO_FAT_ABOVE);
  473. else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
  474. return !(ch_info->fat_extension_channel &
  475. IEEE80211_CHAN_NO_FAT_BELOW);
  476. return 0;
  477. }
  478. u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
  479. struct ieee80211_sta_ht_cap *sta_ht_inf)
  480. {
  481. struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
  482. if ((!iwl_ht_conf->is_ht) ||
  483. (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
  484. (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE))
  485. return 0;
  486. if (sta_ht_inf) {
  487. if ((!sta_ht_inf->ht_supported) ||
  488. (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)))
  489. return 0;
  490. }
  491. return iwl_is_channel_extension(priv, priv->band,
  492. le16_to_cpu(priv->staging_rxon.channel),
  493. iwl_ht_conf->extension_chan_offset);
  494. }
  495. EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
  496. void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
  497. {
  498. struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
  499. u32 val;
  500. if (!ht_info->is_ht) {
  501. rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
  502. RXON_FLG_CHANNEL_MODE_PURE_40_MSK |
  503. RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
  504. RXON_FLG_FAT_PROT_MSK |
  505. RXON_FLG_HT_PROT_MSK);
  506. return;
  507. }
  508. /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */
  509. if (iwl_is_fat_tx_allowed(priv, NULL))
  510. rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  511. else
  512. rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
  513. RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
  514. /* Note: control channel is opposite of extension channel */
  515. switch (ht_info->extension_chan_offset) {
  516. case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
  517. rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
  518. break;
  519. case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
  520. rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
  521. break;
  522. case IEEE80211_HT_PARAM_CHA_SEC_NONE:
  523. default:
  524. rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  525. break;
  526. }
  527. val = ht_info->ht_protection;
  528. rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
  529. iwl_set_rxon_chain(priv);
  530. IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
  531. "rxon flags 0x%X operation mode :0x%X "
  532. "extension channel offset 0x%x\n",
  533. ht_info->mcs.rx_mask[0],
  534. ht_info->mcs.rx_mask[1],
  535. ht_info->mcs.rx_mask[2],
  536. le32_to_cpu(rxon->flags), ht_info->ht_protection,
  537. ht_info->extension_chan_offset);
  538. return;
  539. }
  540. EXPORT_SYMBOL(iwl_set_rxon_ht);
  541. #define IWL_NUM_RX_CHAINS_MULTIPLE 3
  542. #define IWL_NUM_RX_CHAINS_SINGLE 2
  543. #define IWL_NUM_IDLE_CHAINS_DUAL 2
  544. #define IWL_NUM_IDLE_CHAINS_SINGLE 1
  545. /* Determine how many receiver/antenna chains to use.
  546. * More provides better reception via diversity. Fewer saves power.
  547. * MIMO (dual stream) requires at least 2, but works better with 3.
  548. * This does not determine *which* chains to use, just how many.
  549. */
  550. static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
  551. {
  552. bool is_single = is_single_rx_stream(priv);
  553. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  554. /* # of Rx chains to use when expecting MIMO. */
  555. if (is_single || (!is_cam && (priv->current_ht_config.sm_ps ==
  556. WLAN_HT_CAP_SM_PS_STATIC)))
  557. return IWL_NUM_RX_CHAINS_SINGLE;
  558. else
  559. return IWL_NUM_RX_CHAINS_MULTIPLE;
  560. }
  561. static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
  562. {
  563. int idle_cnt;
  564. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  565. /* # Rx chains when idling and maybe trying to save power */
  566. switch (priv->current_ht_config.sm_ps) {
  567. case WLAN_HT_CAP_SM_PS_STATIC:
  568. case WLAN_HT_CAP_SM_PS_DYNAMIC:
  569. idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
  570. IWL_NUM_IDLE_CHAINS_SINGLE;
  571. break;
  572. case WLAN_HT_CAP_SM_PS_DISABLED:
  573. idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
  574. break;
  575. case WLAN_HT_CAP_SM_PS_INVALID:
  576. default:
  577. IWL_ERR(priv, "invalid mimo ps mode %d\n",
  578. priv->current_ht_config.sm_ps);
  579. WARN_ON(1);
  580. idle_cnt = -1;
  581. break;
  582. }
  583. return idle_cnt;
  584. }
  585. /* up to 4 chains */
  586. static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
  587. {
  588. u8 res;
  589. res = (chain_bitmap & BIT(0)) >> 0;
  590. res += (chain_bitmap & BIT(1)) >> 1;
  591. res += (chain_bitmap & BIT(2)) >> 2;
  592. res += (chain_bitmap & BIT(4)) >> 4;
  593. return res;
  594. }
  595. /**
  596. * iwl_is_monitor_mode - Determine if interface in monitor mode
  597. *
  598. * priv->iw_mode is set in add_interface, but add_interface is
  599. * never called for monitor mode. The only way mac80211 informs us about
  600. * monitor mode is through configuring filters (call to configure_filter).
  601. */
  602. static bool iwl_is_monitor_mode(struct iwl_priv *priv)
  603. {
  604. return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
  605. }
  606. /**
  607. * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
  608. *
  609. * Selects how many and which Rx receivers/antennas/chains to use.
  610. * This should not be used for scan command ... it puts data in wrong place.
  611. */
  612. void iwl_set_rxon_chain(struct iwl_priv *priv)
  613. {
  614. bool is_single = is_single_rx_stream(priv);
  615. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  616. u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
  617. u32 active_chains;
  618. u16 rx_chain;
  619. /* Tell uCode which antennas are actually connected.
  620. * Before first association, we assume all antennas are connected.
  621. * Just after first association, iwl_chain_noise_calibration()
  622. * checks which antennas actually *are* connected. */
  623. if (priv->chain_noise_data.active_chains)
  624. active_chains = priv->chain_noise_data.active_chains;
  625. else
  626. active_chains = priv->hw_params.valid_rx_ant;
  627. rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
  628. /* How many receivers should we use? */
  629. active_rx_cnt = iwl_get_active_rx_chain_count(priv);
  630. idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
  631. /* correct rx chain count according hw settings
  632. * and chain noise calibration
  633. */
  634. valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
  635. if (valid_rx_cnt < active_rx_cnt)
  636. active_rx_cnt = valid_rx_cnt;
  637. if (valid_rx_cnt < idle_rx_cnt)
  638. idle_rx_cnt = valid_rx_cnt;
  639. rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
  640. rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
  641. /* copied from 'iwl_bg_request_scan()' */
  642. /* Force use of chains B and C (0x6) for Rx for 4965
  643. * Avoid A (0x1) because of its off-channel reception on A-band.
  644. * MIMO is not used here, but value is required */
  645. if (iwl_is_monitor_mode(priv) &&
  646. !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
  647. ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) {
  648. rx_chain = 0x07 << RXON_RX_CHAIN_VALID_POS;
  649. rx_chain |= 0x06 << RXON_RX_CHAIN_FORCE_SEL_POS;
  650. rx_chain |= 0x07 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
  651. rx_chain |= 0x01 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
  652. }
  653. priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
  654. if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
  655. priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
  656. else
  657. priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
  658. IWL_DEBUG_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
  659. priv->staging_rxon.rx_chain,
  660. active_rx_cnt, idle_rx_cnt);
  661. WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
  662. active_rx_cnt < idle_rx_cnt);
  663. }
  664. EXPORT_SYMBOL(iwl_set_rxon_chain);
  665. /**
  666. * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  667. * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
  668. * @channel: Any channel valid for the requested phymode
  669. * In addition to setting the staging RXON, priv->phymode is also set.
  670. *
  671. * NOTE: Does not commit to the hardware; it sets appropriate bit fields
  672. * in the staging RXON flag structure based on the phymode
  673. */
  674. int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch)
  675. {
  676. enum ieee80211_band band = ch->band;
  677. u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
  678. if (!iwl_get_channel_info(priv, band, channel)) {
  679. IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
  680. channel, band);
  681. return -EINVAL;
  682. }
  683. if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
  684. (priv->band == band))
  685. return 0;
  686. priv->staging_rxon.channel = cpu_to_le16(channel);
  687. if (band == IEEE80211_BAND_5GHZ)
  688. priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
  689. else
  690. priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
  691. priv->band = band;
  692. IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
  693. return 0;
  694. }
  695. EXPORT_SYMBOL(iwl_set_rxon_channel);
  696. int iwl_setup_mac(struct iwl_priv *priv)
  697. {
  698. int ret;
  699. struct ieee80211_hw *hw = priv->hw;
  700. hw->rate_control_algorithm = "iwl-agn-rs";
  701. /* Tell mac80211 our characteristics */
  702. hw->flags = IEEE80211_HW_SIGNAL_DBM |
  703. IEEE80211_HW_NOISE_DBM |
  704. IEEE80211_HW_AMPDU_AGGREGATION |
  705. IEEE80211_HW_SUPPORTS_PS;
  706. hw->wiphy->interface_modes =
  707. BIT(NL80211_IFTYPE_STATION) |
  708. BIT(NL80211_IFTYPE_ADHOC);
  709. hw->wiphy->custom_regulatory = true;
  710. /* Default value; 4 EDCA QOS priorities */
  711. hw->queues = 4;
  712. /* queues to support 11n aggregation */
  713. if (priv->cfg->sku & IWL_SKU_N)
  714. hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
  715. hw->conf.beacon_int = 100;
  716. hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
  717. if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
  718. priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
  719. &priv->bands[IEEE80211_BAND_2GHZ];
  720. if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
  721. priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
  722. &priv->bands[IEEE80211_BAND_5GHZ];
  723. ret = ieee80211_register_hw(priv->hw);
  724. if (ret) {
  725. IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
  726. return ret;
  727. }
  728. priv->mac80211_registered = 1;
  729. return 0;
  730. }
  731. EXPORT_SYMBOL(iwl_setup_mac);
  732. int iwl_set_hw_params(struct iwl_priv *priv)
  733. {
  734. priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
  735. priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
  736. priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
  737. if (priv->cfg->mod_params->amsdu_size_8K)
  738. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
  739. else
  740. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
  741. priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
  742. if (priv->cfg->mod_params->disable_11n)
  743. priv->cfg->sku &= ~IWL_SKU_N;
  744. /* Device-specific setup */
  745. return priv->cfg->ops->lib->set_hw_params(priv);
  746. }
  747. EXPORT_SYMBOL(iwl_set_hw_params);
  748. int iwl_init_drv(struct iwl_priv *priv)
  749. {
  750. int ret;
  751. priv->ibss_beacon = NULL;
  752. spin_lock_init(&priv->lock);
  753. spin_lock_init(&priv->power_data.lock);
  754. spin_lock_init(&priv->sta_lock);
  755. spin_lock_init(&priv->hcmd_lock);
  756. INIT_LIST_HEAD(&priv->free_frames);
  757. mutex_init(&priv->mutex);
  758. /* Clear the driver's (not device's) station table */
  759. iwl_clear_stations_table(priv);
  760. priv->data_retry_limit = -1;
  761. priv->ieee_channels = NULL;
  762. priv->ieee_rates = NULL;
  763. priv->band = IEEE80211_BAND_2GHZ;
  764. priv->iw_mode = NL80211_IFTYPE_STATION;
  765. priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
  766. /* Choose which receivers/antennas to use */
  767. iwl_set_rxon_chain(priv);
  768. iwl_init_scan_params(priv);
  769. iwl_reset_qos(priv);
  770. priv->qos_data.qos_active = 0;
  771. priv->qos_data.qos_cap.val = 0;
  772. priv->rates_mask = IWL_RATES_MASK;
  773. /* If power management is turned on, default to AC mode */
  774. priv->power_mode = IWL_POWER_AC;
  775. priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
  776. ret = iwl_init_channel_map(priv);
  777. if (ret) {
  778. IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
  779. goto err;
  780. }
  781. ret = iwlcore_init_geos(priv);
  782. if (ret) {
  783. IWL_ERR(priv, "initializing geos failed: %d\n", ret);
  784. goto err_free_channel_map;
  785. }
  786. return 0;
  787. err_free_channel_map:
  788. iwl_free_channel_map(priv);
  789. err:
  790. return ret;
  791. }
  792. EXPORT_SYMBOL(iwl_init_drv);
  793. int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
  794. {
  795. int ret = 0;
  796. if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
  797. IWL_WARN(priv, "Requested user TXPOWER %d below limit.\n",
  798. priv->tx_power_user_lmt);
  799. return -EINVAL;
  800. }
  801. if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
  802. IWL_WARN(priv, "Requested user TXPOWER %d above limit.\n",
  803. priv->tx_power_user_lmt);
  804. return -EINVAL;
  805. }
  806. if (priv->tx_power_user_lmt != tx_power)
  807. force = true;
  808. priv->tx_power_user_lmt = tx_power;
  809. if (force && priv->cfg->ops->lib->send_tx_power)
  810. ret = priv->cfg->ops->lib->send_tx_power(priv);
  811. return ret;
  812. }
  813. EXPORT_SYMBOL(iwl_set_tx_power);
  814. void iwl_uninit_drv(struct iwl_priv *priv)
  815. {
  816. iwl_calib_free_results(priv);
  817. iwlcore_free_geos(priv);
  818. iwl_free_channel_map(priv);
  819. kfree(priv->scan);
  820. }
  821. EXPORT_SYMBOL(iwl_uninit_drv);
  822. void iwl_disable_interrupts(struct iwl_priv *priv)
  823. {
  824. clear_bit(STATUS_INT_ENABLED, &priv->status);
  825. /* disable interrupts from uCode/NIC to host */
  826. iwl_write32(priv, CSR_INT_MASK, 0x00000000);
  827. /* acknowledge/clear/reset any interrupts still pending
  828. * from uCode or flow handler (Rx/Tx DMA) */
  829. iwl_write32(priv, CSR_INT, 0xffffffff);
  830. iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
  831. IWL_DEBUG_ISR("Disabled interrupts\n");
  832. }
  833. EXPORT_SYMBOL(iwl_disable_interrupts);
  834. void iwl_enable_interrupts(struct iwl_priv *priv)
  835. {
  836. IWL_DEBUG_ISR("Enabling interrupts\n");
  837. set_bit(STATUS_INT_ENABLED, &priv->status);
  838. iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
  839. }
  840. EXPORT_SYMBOL(iwl_enable_interrupts);
  841. int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
  842. {
  843. u32 stat_flags = 0;
  844. struct iwl_host_cmd cmd = {
  845. .id = REPLY_STATISTICS_CMD,
  846. .meta.flags = flags,
  847. .len = sizeof(stat_flags),
  848. .data = (u8 *) &stat_flags,
  849. };
  850. return iwl_send_cmd(priv, &cmd);
  851. }
  852. EXPORT_SYMBOL(iwl_send_statistics_request);
  853. /**
  854. * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
  855. * using sample data 100 bytes apart. If these sample points are good,
  856. * it's a pretty good bet that everything between them is good, too.
  857. */
  858. static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
  859. {
  860. u32 val;
  861. int ret = 0;
  862. u32 errcnt = 0;
  863. u32 i;
  864. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  865. ret = iwl_grab_nic_access(priv);
  866. if (ret)
  867. return ret;
  868. for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
  869. /* read data comes through single port, auto-incr addr */
  870. /* NOTE: Use the debugless read so we don't flood kernel log
  871. * if IWL_DL_IO is set */
  872. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
  873. i + IWL49_RTC_INST_LOWER_BOUND);
  874. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  875. if (val != le32_to_cpu(*image)) {
  876. ret = -EIO;
  877. errcnt++;
  878. if (errcnt >= 3)
  879. break;
  880. }
  881. }
  882. iwl_release_nic_access(priv);
  883. return ret;
  884. }
  885. /**
  886. * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
  887. * looking at all data.
  888. */
  889. static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
  890. u32 len)
  891. {
  892. u32 val;
  893. u32 save_len = len;
  894. int ret = 0;
  895. u32 errcnt;
  896. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  897. ret = iwl_grab_nic_access(priv);
  898. if (ret)
  899. return ret;
  900. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
  901. IWL49_RTC_INST_LOWER_BOUND);
  902. errcnt = 0;
  903. for (; len > 0; len -= sizeof(u32), image++) {
  904. /* read data comes through single port, auto-incr addr */
  905. /* NOTE: Use the debugless read so we don't flood kernel log
  906. * if IWL_DL_IO is set */
  907. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  908. if (val != le32_to_cpu(*image)) {
  909. IWL_ERR(priv, "uCode INST section is invalid at "
  910. "offset 0x%x, is 0x%x, s/b 0x%x\n",
  911. save_len - len, val, le32_to_cpu(*image));
  912. ret = -EIO;
  913. errcnt++;
  914. if (errcnt >= 20)
  915. break;
  916. }
  917. }
  918. iwl_release_nic_access(priv);
  919. if (!errcnt)
  920. IWL_DEBUG_INFO
  921. ("ucode image in INSTRUCTION memory is good\n");
  922. return ret;
  923. }
  924. /**
  925. * iwl_verify_ucode - determine which instruction image is in SRAM,
  926. * and verify its contents
  927. */
  928. int iwl_verify_ucode(struct iwl_priv *priv)
  929. {
  930. __le32 *image;
  931. u32 len;
  932. int ret;
  933. /* Try bootstrap */
  934. image = (__le32 *)priv->ucode_boot.v_addr;
  935. len = priv->ucode_boot.len;
  936. ret = iwlcore_verify_inst_sparse(priv, image, len);
  937. if (!ret) {
  938. IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
  939. return 0;
  940. }
  941. /* Try initialize */
  942. image = (__le32 *)priv->ucode_init.v_addr;
  943. len = priv->ucode_init.len;
  944. ret = iwlcore_verify_inst_sparse(priv, image, len);
  945. if (!ret) {
  946. IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
  947. return 0;
  948. }
  949. /* Try runtime/protocol */
  950. image = (__le32 *)priv->ucode_code.v_addr;
  951. len = priv->ucode_code.len;
  952. ret = iwlcore_verify_inst_sparse(priv, image, len);
  953. if (!ret) {
  954. IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
  955. return 0;
  956. }
  957. IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
  958. /* Since nothing seems to match, show first several data entries in
  959. * instruction SRAM, so maybe visual inspection will give a clue.
  960. * Selection of bootstrap image (vs. other images) is arbitrary. */
  961. image = (__le32 *)priv->ucode_boot.v_addr;
  962. len = priv->ucode_boot.len;
  963. ret = iwl_verify_inst_full(priv, image, len);
  964. return ret;
  965. }
  966. EXPORT_SYMBOL(iwl_verify_ucode);
  967. static const char *desc_lookup_text[] = {
  968. "OK",
  969. "FAIL",
  970. "BAD_PARAM",
  971. "BAD_CHECKSUM",
  972. "NMI_INTERRUPT_WDG",
  973. "SYSASSERT",
  974. "FATAL_ERROR",
  975. "BAD_COMMAND",
  976. "HW_ERROR_TUNE_LOCK",
  977. "HW_ERROR_TEMPERATURE",
  978. "ILLEGAL_CHAN_FREQ",
  979. "VCC_NOT_STABLE",
  980. "FH_ERROR",
  981. "NMI_INTERRUPT_HOST",
  982. "NMI_INTERRUPT_ACTION_PT",
  983. "NMI_INTERRUPT_UNKNOWN",
  984. "UCODE_VERSION_MISMATCH",
  985. "HW_ERROR_ABS_LOCK",
  986. "HW_ERROR_CAL_LOCK_FAIL",
  987. "NMI_INTERRUPT_INST_ACTION_PT",
  988. "NMI_INTERRUPT_DATA_ACTION_PT",
  989. "NMI_TRM_HW_ER",
  990. "NMI_INTERRUPT_TRM",
  991. "NMI_INTERRUPT_BREAK_POINT"
  992. "DEBUG_0",
  993. "DEBUG_1",
  994. "DEBUG_2",
  995. "DEBUG_3",
  996. "UNKNOWN"
  997. };
  998. static const char *desc_lookup(int i)
  999. {
  1000. int max = ARRAY_SIZE(desc_lookup_text) - 1;
  1001. if (i < 0 || i > max)
  1002. i = max;
  1003. return desc_lookup_text[i];
  1004. }
  1005. #define ERROR_START_OFFSET (1 * sizeof(u32))
  1006. #define ERROR_ELEM_SIZE (7 * sizeof(u32))
  1007. void iwl_dump_nic_error_log(struct iwl_priv *priv)
  1008. {
  1009. u32 data2, line;
  1010. u32 desc, time, count, base, data1;
  1011. u32 blink1, blink2, ilink1, ilink2;
  1012. int ret;
  1013. if (priv->ucode_type == UCODE_INIT)
  1014. base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
  1015. else
  1016. base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
  1017. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  1018. IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
  1019. return;
  1020. }
  1021. ret = iwl_grab_nic_access(priv);
  1022. if (ret) {
  1023. IWL_WARN(priv, "Can not read from adapter at this time.\n");
  1024. return;
  1025. }
  1026. count = iwl_read_targ_mem(priv, base);
  1027. if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
  1028. IWL_ERR(priv, "Start IWL Error Log Dump:\n");
  1029. IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
  1030. priv->status, count);
  1031. }
  1032. desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
  1033. blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
  1034. blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
  1035. ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
  1036. ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
  1037. data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
  1038. data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
  1039. line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
  1040. time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
  1041. IWL_ERR(priv, "Desc Time "
  1042. "data1 data2 line\n");
  1043. IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
  1044. desc_lookup(desc), desc, time, data1, data2, line);
  1045. IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
  1046. IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
  1047. ilink1, ilink2);
  1048. iwl_release_nic_access(priv);
  1049. }
  1050. EXPORT_SYMBOL(iwl_dump_nic_error_log);
  1051. #define EVENT_START_OFFSET (4 * sizeof(u32))
  1052. /**
  1053. * iwl_print_event_log - Dump error event log to syslog
  1054. *
  1055. * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  1056. */
  1057. static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
  1058. u32 num_events, u32 mode)
  1059. {
  1060. u32 i;
  1061. u32 base; /* SRAM byte address of event log header */
  1062. u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
  1063. u32 ptr; /* SRAM byte address of log data */
  1064. u32 ev, time, data; /* event log data */
  1065. if (num_events == 0)
  1066. return;
  1067. if (priv->ucode_type == UCODE_INIT)
  1068. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1069. else
  1070. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1071. if (mode == 0)
  1072. event_size = 2 * sizeof(u32);
  1073. else
  1074. event_size = 3 * sizeof(u32);
  1075. ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
  1076. /* "time" is actually "data" for mode 0 (no timestamp).
  1077. * place event id # at far right for easier visual parsing. */
  1078. for (i = 0; i < num_events; i++) {
  1079. ev = iwl_read_targ_mem(priv, ptr);
  1080. ptr += sizeof(u32);
  1081. time = iwl_read_targ_mem(priv, ptr);
  1082. ptr += sizeof(u32);
  1083. if (mode == 0) {
  1084. /* data, ev */
  1085. IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
  1086. } else {
  1087. data = iwl_read_targ_mem(priv, ptr);
  1088. ptr += sizeof(u32);
  1089. IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
  1090. time, data, ev);
  1091. }
  1092. }
  1093. }
  1094. void iwl_dump_nic_event_log(struct iwl_priv *priv)
  1095. {
  1096. int ret;
  1097. u32 base; /* SRAM byte address of event log header */
  1098. u32 capacity; /* event log capacity in # entries */
  1099. u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
  1100. u32 num_wraps; /* # times uCode wrapped to top of log */
  1101. u32 next_entry; /* index of next entry to be written by uCode */
  1102. u32 size; /* # entries that we'll print */
  1103. if (priv->ucode_type == UCODE_INIT)
  1104. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1105. else
  1106. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1107. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  1108. IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
  1109. return;
  1110. }
  1111. ret = iwl_grab_nic_access(priv);
  1112. if (ret) {
  1113. IWL_WARN(priv, "Can not read from adapter at this time.\n");
  1114. return;
  1115. }
  1116. /* event log header */
  1117. capacity = iwl_read_targ_mem(priv, base);
  1118. mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
  1119. num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
  1120. next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
  1121. size = num_wraps ? capacity : next_entry;
  1122. /* bail out if nothing in log */
  1123. if (size == 0) {
  1124. IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
  1125. iwl_release_nic_access(priv);
  1126. return;
  1127. }
  1128. IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
  1129. size, num_wraps);
  1130. /* if uCode has wrapped back to top of log, start at the oldest entry,
  1131. * i.e the next one that uCode would fill. */
  1132. if (num_wraps)
  1133. iwl_print_event_log(priv, next_entry,
  1134. capacity - next_entry, mode);
  1135. /* (then/else) start at top of log */
  1136. iwl_print_event_log(priv, 0, next_entry, mode);
  1137. iwl_release_nic_access(priv);
  1138. }
  1139. EXPORT_SYMBOL(iwl_dump_nic_event_log);
  1140. void iwl_rf_kill_ct_config(struct iwl_priv *priv)
  1141. {
  1142. struct iwl_ct_kill_config cmd;
  1143. unsigned long flags;
  1144. int ret = 0;
  1145. spin_lock_irqsave(&priv->lock, flags);
  1146. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
  1147. CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
  1148. spin_unlock_irqrestore(&priv->lock, flags);
  1149. cmd.critical_temperature_R =
  1150. cpu_to_le32(priv->hw_params.ct_kill_threshold);
  1151. ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
  1152. sizeof(cmd), &cmd);
  1153. if (ret)
  1154. IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
  1155. else
  1156. IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
  1157. "critical temperature is %d\n",
  1158. cmd.critical_temperature_R);
  1159. }
  1160. EXPORT_SYMBOL(iwl_rf_kill_ct_config);
  1161. /*
  1162. * CARD_STATE_CMD
  1163. *
  1164. * Use: Sets the device's internal card state to enable, disable, or halt
  1165. *
  1166. * When in the 'enable' state the card operates as normal.
  1167. * When in the 'disable' state, the card enters into a low power mode.
  1168. * When in the 'halt' state, the card is shut down and must be fully
  1169. * restarted to come back on.
  1170. */
  1171. int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
  1172. {
  1173. struct iwl_host_cmd cmd = {
  1174. .id = REPLY_CARD_STATE_CMD,
  1175. .len = sizeof(u32),
  1176. .data = &flags,
  1177. .meta.flags = meta_flag,
  1178. };
  1179. return iwl_send_cmd(priv, &cmd);
  1180. }
  1181. EXPORT_SYMBOL(iwl_send_card_state);
  1182. void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
  1183. {
  1184. unsigned long flags;
  1185. if (test_bit(STATUS_RF_KILL_SW, &priv->status))
  1186. return;
  1187. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n");
  1188. iwl_scan_cancel(priv);
  1189. /* FIXME: This is a workaround for AP */
  1190. if (priv->iw_mode != NL80211_IFTYPE_AP) {
  1191. spin_lock_irqsave(&priv->lock, flags);
  1192. iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
  1193. CSR_UCODE_SW_BIT_RFKILL);
  1194. spin_unlock_irqrestore(&priv->lock, flags);
  1195. /* call the host command only if no hw rf-kill set */
  1196. if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
  1197. iwl_is_ready(priv))
  1198. iwl_send_card_state(priv,
  1199. CARD_STATE_CMD_DISABLE, 0);
  1200. set_bit(STATUS_RF_KILL_SW, &priv->status);
  1201. /* make sure mac80211 stop sending Tx frame */
  1202. if (priv->mac80211_registered)
  1203. ieee80211_stop_queues(priv->hw);
  1204. }
  1205. }
  1206. EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
  1207. int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
  1208. {
  1209. unsigned long flags;
  1210. if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
  1211. return 0;
  1212. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n");
  1213. spin_lock_irqsave(&priv->lock, flags);
  1214. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
  1215. /* If the driver is up it will receive CARD_STATE_NOTIFICATION
  1216. * notification where it will clear SW rfkill status.
  1217. * Setting it here would break the handler. Only if the
  1218. * interface is down we can set here since we don't
  1219. * receive any further notification.
  1220. */
  1221. if (!priv->is_open)
  1222. clear_bit(STATUS_RF_KILL_SW, &priv->status);
  1223. spin_unlock_irqrestore(&priv->lock, flags);
  1224. /* wake up ucode */
  1225. msleep(10);
  1226. spin_lock_irqsave(&priv->lock, flags);
  1227. iwl_read32(priv, CSR_UCODE_DRV_GP1);
  1228. if (!iwl_grab_nic_access(priv))
  1229. iwl_release_nic_access(priv);
  1230. spin_unlock_irqrestore(&priv->lock, flags);
  1231. if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
  1232. IWL_DEBUG_RF_KILL("Can not turn radio back on - "
  1233. "disabled by HW switch\n");
  1234. return 0;
  1235. }
  1236. /* when driver is up while rfkill is on, it wont receive
  1237. * any CARD_STATE_NOTIFICATION notifications so we have to
  1238. * restart it in here
  1239. */
  1240. if (priv->is_open && !test_bit(STATUS_ALIVE, &priv->status)) {
  1241. clear_bit(STATUS_RF_KILL_SW, &priv->status);
  1242. if (!iwl_is_rfkill(priv))
  1243. queue_work(priv->workqueue, &priv->up);
  1244. }
  1245. /* If the driver is already loaded, it will receive
  1246. * CARD_STATE_NOTIFICATION notifications and the handler will
  1247. * call restart to reload the driver.
  1248. */
  1249. return 1;
  1250. }
  1251. EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);
  1252. void iwl_bg_rf_kill(struct work_struct *work)
  1253. {
  1254. struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
  1255. wake_up_interruptible(&priv->wait_command_queue);
  1256. if (test_bit(STATUS_EXIT_PENDING, &priv->status))
  1257. return;
  1258. mutex_lock(&priv->mutex);
  1259. if (!iwl_is_rfkill(priv)) {
  1260. IWL_DEBUG(IWL_DL_RF_KILL,
  1261. "HW and/or SW RF Kill no longer active, restarting "
  1262. "device\n");
  1263. if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
  1264. test_bit(STATUS_ALIVE, &priv->status))
  1265. queue_work(priv->workqueue, &priv->restart);
  1266. } else {
  1267. /* make sure mac80211 stop sending Tx frame */
  1268. if (priv->mac80211_registered)
  1269. ieee80211_stop_queues(priv->hw);
  1270. if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
  1271. IWL_DEBUG_RF_KILL("Can not turn radio back on - "
  1272. "disabled by SW switch\n");
  1273. else
  1274. IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n"
  1275. "Kill switch must be turned off for "
  1276. "wireless networking to work.\n");
  1277. }
  1278. mutex_unlock(&priv->mutex);
  1279. iwl_rfkill_set_hw_state(priv);
  1280. }
  1281. EXPORT_SYMBOL(iwl_bg_rf_kill);