sa1100_wdt.c 4.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190
  1. /*
  2. * Watchdog driver for the SA11x0/PXA2xx
  3. *
  4. * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
  5. * Based on SoftDog driver by Alan Cox <alan@redhat.com>
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License
  9. * as published by the Free Software Foundation; either version
  10. * 2 of the License, or (at your option) any later version.
  11. *
  12. * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
  13. * warranty for any of this software. This material is provided
  14. * "AS-IS" and at no charge.
  15. *
  16. * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
  17. *
  18. * 27/11/2000 Initial release
  19. */
  20. #include <linux/module.h>
  21. #include <linux/moduleparam.h>
  22. #include <linux/types.h>
  23. #include <linux/kernel.h>
  24. #include <linux/fs.h>
  25. #include <linux/miscdevice.h>
  26. #include <linux/watchdog.h>
  27. #include <linux/init.h>
  28. #include <linux/bitops.h>
  29. #ifdef CONFIG_ARCH_PXA
  30. #include <asm/arch/pxa-regs.h>
  31. #endif
  32. #include <asm/hardware.h>
  33. #include <asm/uaccess.h>
  34. #define OSCR_FREQ CLOCK_TICK_RATE
  35. static unsigned long sa1100wdt_users;
  36. static int pre_margin;
  37. static int boot_status;
  38. /*
  39. * Allow only one person to hold it open
  40. */
  41. static int sa1100dog_open(struct inode *inode, struct file *file)
  42. {
  43. if (test_and_set_bit(1,&sa1100wdt_users))
  44. return -EBUSY;
  45. /* Activate SA1100 Watchdog timer */
  46. OSMR3 = OSCR + pre_margin;
  47. OSSR = OSSR_M3;
  48. OWER = OWER_WME;
  49. OIER |= OIER_E3;
  50. return nonseekable_open(inode, file);
  51. }
  52. /*
  53. * The watchdog cannot be disabled.
  54. *
  55. * Previous comments suggested that turning off the interrupt by
  56. * clearing OIER[E3] would prevent the watchdog timing out but this
  57. * does not appear to be true (at least on the PXA255).
  58. */
  59. static int sa1100dog_release(struct inode *inode, struct file *file)
  60. {
  61. printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
  62. clear_bit(1, &sa1100wdt_users);
  63. return 0;
  64. }
  65. static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
  66. {
  67. if (len)
  68. /* Refresh OSMR3 timer. */
  69. OSMR3 = OSCR + pre_margin;
  70. return len;
  71. }
  72. static struct watchdog_info ident = {
  73. .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
  74. .identity = "SA1100/PXA255 Watchdog",
  75. };
  76. static int sa1100dog_ioctl(struct inode *inode, struct file *file,
  77. unsigned int cmd, unsigned long arg)
  78. {
  79. int ret = -ENOTTY;
  80. int time;
  81. void __user *argp = (void __user *)arg;
  82. int __user *p = argp;
  83. switch (cmd) {
  84. case WDIOC_GETSUPPORT:
  85. ret = copy_to_user(argp, &ident,
  86. sizeof(ident)) ? -EFAULT : 0;
  87. break;
  88. case WDIOC_GETSTATUS:
  89. ret = put_user(0, p);
  90. break;
  91. case WDIOC_GETBOOTSTATUS:
  92. ret = put_user(boot_status, p);
  93. break;
  94. case WDIOC_SETTIMEOUT:
  95. ret = get_user(time, p);
  96. if (ret)
  97. break;
  98. if (time <= 0 || time > 255) {
  99. ret = -EINVAL;
  100. break;
  101. }
  102. pre_margin = OSCR_FREQ * time;
  103. OSMR3 = OSCR + pre_margin;
  104. /*fall through*/
  105. case WDIOC_GETTIMEOUT:
  106. ret = put_user(pre_margin / OSCR_FREQ, p);
  107. break;
  108. case WDIOC_KEEPALIVE:
  109. OSMR3 = OSCR + pre_margin;
  110. ret = 0;
  111. break;
  112. }
  113. return ret;
  114. }
  115. static const struct file_operations sa1100dog_fops =
  116. {
  117. .owner = THIS_MODULE,
  118. .llseek = no_llseek,
  119. .write = sa1100dog_write,
  120. .ioctl = sa1100dog_ioctl,
  121. .open = sa1100dog_open,
  122. .release = sa1100dog_release,
  123. };
  124. static struct miscdevice sa1100dog_miscdev =
  125. {
  126. .minor = WATCHDOG_MINOR,
  127. .name = "watchdog",
  128. .fops = &sa1100dog_fops,
  129. };
  130. static int margin __initdata = 60; /* (secs) Default is 1 minute */
  131. static int __init sa1100dog_init(void)
  132. {
  133. int ret;
  134. /*
  135. * Read the reset status, and save it for later. If
  136. * we suspend, RCSR will be cleared, and the watchdog
  137. * reset reason will be lost.
  138. */
  139. boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0;
  140. pre_margin = OSCR_FREQ * margin;
  141. ret = misc_register(&sa1100dog_miscdev);
  142. if (ret == 0)
  143. printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
  144. margin);
  145. return ret;
  146. }
  147. static void __exit sa1100dog_exit(void)
  148. {
  149. misc_deregister(&sa1100dog_miscdev);
  150. }
  151. module_init(sa1100dog_init);
  152. module_exit(sa1100dog_exit);
  153. MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
  154. MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
  155. module_param(margin, int, 0);
  156. MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
  157. MODULE_LICENSE("GPL");
  158. MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);