| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224 |
- if ARCH_AT91
- menu "Atmel AT91 System-on-Chip"
- choice
- prompt "Atmel AT91 Processor"
- config ARCH_AT91RM9200
- bool "AT91RM9200"
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
- config ARCH_AT91SAM9261
- bool "AT91SAM9261"
- config ARCH_AT91SAM9263
- bool "AT91SAM9263"
- config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
- config ARCH_AT91X40
- bool "AT91x40"
- endchoice
- config AT91_PMC_UNIT
- bool
- default !ARCH_AT91X40
- # ----------------------------------------------------------
- if ARCH_AT91RM9200
- comment "AT91RM9200 Board Type"
- config MACH_ONEARM
- bool "Ajeco 1ARM Single Board Computer"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/products.htm>
- config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
- config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
- config MACH_CSB337
- bool "Cogent CSB337"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Cogent's CSB337 board.
- <http://www.cogcomp.com/csb_csb337.htm>
- config MACH_CSB637
- bool "Cogent CSB637"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Cogent's CSB637 board.
- <http://www.cogcomp.com/csb_csb637.htm>
- config MACH_CARMEVA
- bool "Conitec ARM&EVA"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.htm>
- config MACH_ATEB9200
- bool "Embest ATEB9200"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Embest's ATEB9200 board.
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
- config MACH_KB9200
- bool "KwikByte KB920x"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using KwikByte's KB920x board.
- <http://kwikbyte.com/KB9202_description_new.htm>
- config MACH_PICOTUX2XX
- bool "picotux 200"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using a picotux 200.
- <http://www.picotux.com/>
- config MACH_KAFA
- bool "Sperry-Sun KAFA board"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Sperry-Sun's KAFA board.
- endif
- # ----------------------------------------------------------
- if ARCH_AT91SAM9260
- comment "AT91SAM9260 Variants"
- config ARCH_AT91SAM9260_SAM9XE
- bool "AT91SAM9XE"
- depends on ARCH_AT91SAM9260
- help
- Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
- They are basically AT91SAM9260s with various sizes of embedded Flash.
- comment "AT91SAM9260 / AT91SAM9XE Board Type"
- config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- depends on ARCH_AT91SAM9260
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
- endif
- # ----------------------------------------------------------
- if ARCH_AT91SAM9261
- comment "AT91SAM9261 Board Type"
- config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- depends on ARCH_AT91SAM9261
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
- endif
- # ----------------------------------------------------------
- if ARCH_AT91SAM9263
- comment "AT91SAM9263 Board Type"
- config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- depends on ARCH_AT91SAM9263
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
- endif
- # ----------------------------------------------------------
- if ARCH_AT91SAM9RL
- comment "AT91SAM9RL Board Type"
- config MACH_AT91SAM9RLEK
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- depends on ARCH_AT91SAM9RL
- help
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
- endif
- # ----------------------------------------------------------
- if ARCH_AT91X40
- comment "AT91X40 Board Type"
- config MACH_AT91EB01
- bool "Atmel AT91EB01 Evaluation Kit"
- help
- Select this if you are using Atmel's AT91EB01 Evaluation Kit.
- It is also a popular target for simulators such as GDB's
- ARM simulator (commonly known as the ARMulator) and the
- Skyeye simulator.
- endif
- # ----------------------------------------------------------
- comment "AT91 Board Options"
- config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
- help
- Enable support for the DataFlash card.
- config MTD_NAND_AT91_BUSWIDTH_16
- bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
- help
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
- # ----------------------------------------------------------
- comment "AT91 Feature Selections"
- config AT91_PROGRAMMABLE_CLOCKS
- bool "Programmable Clocks"
- help
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
- endmenu
- endif
|
