sta_info.h 16 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506
  1. /*
  2. * Copyright 2002-2005, Devicescape Software, Inc.
  3. *
  4. * This program is free software; you can redistribute it and/or modify
  5. * it under the terms of the GNU General Public License version 2 as
  6. * published by the Free Software Foundation.
  7. */
  8. #ifndef STA_INFO_H
  9. #define STA_INFO_H
  10. #include <linux/list.h>
  11. #include <linux/types.h>
  12. #include <linux/if_ether.h>
  13. #include <linux/workqueue.h>
  14. #include <linux/average.h>
  15. #include "key.h"
  16. /**
  17. * enum ieee80211_sta_info_flags - Stations flags
  18. *
  19. * These flags are used with &struct sta_info's @flags member.
  20. *
  21. * @WLAN_STA_AUTH: Station is authenticated.
  22. * @WLAN_STA_ASSOC: Station is associated.
  23. * @WLAN_STA_PS_STA: Station is in power-save mode
  24. * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
  25. * This bit is always checked so needs to be enabled for all stations
  26. * when virtual port control is not in use.
  27. * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
  28. * frames.
  29. * @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
  30. * @WLAN_STA_WME: Station is a QoS-STA.
  31. * @WLAN_STA_WDS: Station is one of our WDS peers.
  32. * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
  33. * IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
  34. * frame to this station is transmitted.
  35. * @WLAN_STA_MFP: Management frame protection is used with this STA.
  36. * @WLAN_STA_BLOCK_BA: Used to deny ADDBA requests (both TX and RX)
  37. * during suspend/resume and station removal.
  38. * @WLAN_STA_PS_DRIVER: driver requires keeping this station in
  39. * power-save mode logically to flush frames that might still
  40. * be in the queues
  41. * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping
  42. * station in power-save mode, reply when the driver unblocks.
  43. * @WLAN_STA_PS_DRIVER_BUF: Station has frames pending in driver internal
  44. * buffers. Automatically cleared on station wake-up.
  45. */
  46. enum ieee80211_sta_info_flags {
  47. WLAN_STA_AUTH = 1<<0,
  48. WLAN_STA_ASSOC = 1<<1,
  49. WLAN_STA_PS_STA = 1<<2,
  50. WLAN_STA_AUTHORIZED = 1<<3,
  51. WLAN_STA_SHORT_PREAMBLE = 1<<4,
  52. WLAN_STA_ASSOC_AP = 1<<5,
  53. WLAN_STA_WME = 1<<6,
  54. WLAN_STA_WDS = 1<<7,
  55. WLAN_STA_CLEAR_PS_FILT = 1<<9,
  56. WLAN_STA_MFP = 1<<10,
  57. WLAN_STA_BLOCK_BA = 1<<11,
  58. WLAN_STA_PS_DRIVER = 1<<12,
  59. WLAN_STA_PSPOLL = 1<<13,
  60. WLAN_STA_PS_DRIVER_BUF = 1<<14,
  61. };
  62. #define STA_TID_NUM 16
  63. #define ADDBA_RESP_INTERVAL HZ
  64. #define HT_AGG_MAX_RETRIES 0x3
  65. #define HT_AGG_STATE_DRV_READY 0
  66. #define HT_AGG_STATE_RESPONSE_RECEIVED 1
  67. #define HT_AGG_STATE_OPERATIONAL 2
  68. #define HT_AGG_STATE_STOPPING 3
  69. #define HT_AGG_STATE_WANT_START 4
  70. #define HT_AGG_STATE_WANT_STOP 5
  71. /**
  72. * struct tid_ampdu_tx - TID aggregation information (Tx).
  73. *
  74. * @rcu_head: rcu head for freeing structure
  75. * @addba_resp_timer: timer for peer's response to addba request
  76. * @pending: pending frames queue -- use sta's spinlock to protect
  77. * @dialog_token: dialog token for aggregation session
  78. * @timeout: session timeout value to be filled in ADDBA requests
  79. * @state: session state (see above)
  80. * @stop_initiator: initiator of a session stop
  81. * @tx_stop: TX DelBA frame when stopping
  82. * @buf_size: reorder buffer size at receiver
  83. *
  84. * This structure's lifetime is managed by RCU, assignments to
  85. * the array holding it must hold the aggregation mutex.
  86. *
  87. * The TX path can access it under RCU lock-free if, and
  88. * only if, the state has the flag %HT_AGG_STATE_OPERATIONAL
  89. * set. Otherwise, the TX path must also acquire the spinlock
  90. * and re-check the state, see comments in the tx code
  91. * touching it.
  92. */
  93. struct tid_ampdu_tx {
  94. struct rcu_head rcu_head;
  95. struct timer_list addba_resp_timer;
  96. struct sk_buff_head pending;
  97. unsigned long state;
  98. u16 timeout;
  99. u8 dialog_token;
  100. u8 stop_initiator;
  101. bool tx_stop;
  102. u8 buf_size;
  103. };
  104. /**
  105. * struct tid_ampdu_rx - TID aggregation information (Rx).
  106. *
  107. * @reorder_buf: buffer to reorder incoming aggregated MPDUs
  108. * @reorder_time: jiffies when skb was added
  109. * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
  110. * @reorder_timer: releases expired frames from the reorder buffer.
  111. * @head_seq_num: head sequence number in reordering buffer.
  112. * @stored_mpdu_num: number of MPDUs in reordering buffer
  113. * @ssn: Starting Sequence Number expected to be aggregated.
  114. * @buf_size: buffer size for incoming A-MPDUs
  115. * @timeout: reset timer value (in TUs).
  116. * @dialog_token: dialog token for aggregation session
  117. * @rcu_head: RCU head used for freeing this struct
  118. * @reorder_lock: serializes access to reorder buffer, see below.
  119. *
  120. * This structure's lifetime is managed by RCU, assignments to
  121. * the array holding it must hold the aggregation mutex.
  122. *
  123. * The @reorder_lock is used to protect the members of this
  124. * struct, except for @timeout, @buf_size and @dialog_token,
  125. * which are constant across the lifetime of the struct (the
  126. * dialog token being used only for debugging).
  127. */
  128. struct tid_ampdu_rx {
  129. struct rcu_head rcu_head;
  130. spinlock_t reorder_lock;
  131. struct sk_buff **reorder_buf;
  132. unsigned long *reorder_time;
  133. struct timer_list session_timer;
  134. struct timer_list reorder_timer;
  135. u16 head_seq_num;
  136. u16 stored_mpdu_num;
  137. u16 ssn;
  138. u16 buf_size;
  139. u16 timeout;
  140. u8 dialog_token;
  141. };
  142. /**
  143. * struct sta_ampdu_mlme - STA aggregation information.
  144. *
  145. * @tid_rx: aggregation info for Rx per TID -- RCU protected
  146. * @tid_tx: aggregation info for Tx per TID
  147. * @tid_start_tx: sessions where start was requested
  148. * @addba_req_num: number of times addBA request has been sent.
  149. * @dialog_token_allocator: dialog token enumerator for each new session;
  150. * @work: work struct for starting/stopping aggregation
  151. * @tid_rx_timer_expired: bitmap indicating on which TIDs the
  152. * RX timer expired until the work for it runs
  153. * @tid_rx_stop_requested: bitmap indicating which BA sessions per TID the
  154. * driver requested to close until the work for it runs
  155. * @mtx: mutex to protect all TX data (except non-NULL assignments
  156. * to tid_tx[idx], which are protected by the sta spinlock)
  157. */
  158. struct sta_ampdu_mlme {
  159. struct mutex mtx;
  160. /* rx */
  161. struct tid_ampdu_rx __rcu *tid_rx[STA_TID_NUM];
  162. unsigned long tid_rx_timer_expired[BITS_TO_LONGS(STA_TID_NUM)];
  163. unsigned long tid_rx_stop_requested[BITS_TO_LONGS(STA_TID_NUM)];
  164. /* tx */
  165. struct work_struct work;
  166. struct tid_ampdu_tx __rcu *tid_tx[STA_TID_NUM];
  167. struct tid_ampdu_tx *tid_start_tx[STA_TID_NUM];
  168. u8 addba_req_num[STA_TID_NUM];
  169. u8 dialog_token_allocator;
  170. };
  171. /**
  172. * struct sta_info - STA information
  173. *
  174. * This structure collects information about a station that
  175. * mac80211 is communicating with.
  176. *
  177. * @list: global linked list entry
  178. * @hnext: hash table linked list pointer
  179. * @local: pointer to the global information
  180. * @sdata: virtual interface this station belongs to
  181. * @ptk: peer key negotiated with this station, if any
  182. * @gtk: group keys negotiated with this station, if any
  183. * @rate_ctrl: rate control algorithm reference
  184. * @rate_ctrl_priv: rate control private per-STA pointer
  185. * @last_tx_rate: rate used for last transmit, to report to userspace as
  186. * "the" transmit rate
  187. * @last_rx_rate_idx: rx status rate index of the last data packet
  188. * @last_rx_rate_flag: rx status flag of the last data packet
  189. * @lock: used for locking all fields that require locking, see comments
  190. * in the header file.
  191. * @flaglock: spinlock for flags accesses
  192. * @drv_unblock_wk: used for driver PS unblocking
  193. * @listen_interval: listen interval of this station, when we're acting as AP
  194. * @flags: STA flags, see &enum ieee80211_sta_info_flags
  195. * @ps_tx_buf: buffer of frames to transmit to this station
  196. * when it leaves power saving state
  197. * @tx_filtered: buffer of frames we already tried to transmit
  198. * but were filtered by hardware due to STA having entered
  199. * power saving state
  200. * @rx_packets: Number of MSDUs received from this STA
  201. * @rx_bytes: Number of bytes received from this STA
  202. * @wep_weak_iv_count: number of weak WEP IVs received from this station
  203. * @last_rx: time (in jiffies) when last frame was received from this STA
  204. * @last_connected: time (in seconds) when a station got connected
  205. * @num_duplicates: number of duplicate frames received from this STA
  206. * @rx_fragments: number of received MPDUs
  207. * @rx_dropped: number of dropped MPDUs from this STA
  208. * @last_signal: signal of last received frame from this STA
  209. * @avg_signal: moving average of signal of received frames from this STA
  210. * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
  211. * @tx_filtered_count: number of frames the hardware filtered for this STA
  212. * @tx_retry_failed: number of frames that failed retry
  213. * @tx_retry_count: total number of retries for frames to this STA
  214. * @fail_avg: moving percentage of failed MSDUs
  215. * @tx_packets: number of RX/TX MSDUs
  216. * @tx_bytes: number of bytes transmitted to this STA
  217. * @tx_fragments: number of transmitted MPDUs
  218. * @tid_seq: per-TID sequence numbers for sending to this STA
  219. * @ampdu_mlme: A-MPDU state machine state
  220. * @timer_to_tid: identity mapping to ID timers
  221. * @llid: Local link ID
  222. * @plid: Peer link ID
  223. * @reason: Cancel reason on PLINK_HOLDING state
  224. * @plink_retries: Retries in establishment
  225. * @ignore_plink_timer: ignore the peer-link timer (used internally)
  226. * @plink_state: peer link state
  227. * @plink_timeout: timeout of peer link
  228. * @plink_timer: peer link watch timer
  229. * @plink_timer_was_running: used by suspend/resume to restore timers
  230. * @debugfs: debug filesystem info
  231. * @sta: station information we share with the driver
  232. * @dead: set to true when sta is unlinked
  233. * @uploaded: set to true when sta is uploaded to the driver
  234. * @lost_packets: number of consecutive lost packets
  235. */
  236. struct sta_info {
  237. /* General information, mostly static */
  238. struct list_head list;
  239. struct sta_info __rcu *hnext;
  240. struct ieee80211_local *local;
  241. struct ieee80211_sub_if_data *sdata;
  242. struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
  243. struct ieee80211_key __rcu *ptk;
  244. struct rate_control_ref *rate_ctrl;
  245. void *rate_ctrl_priv;
  246. spinlock_t lock;
  247. spinlock_t flaglock;
  248. struct work_struct drv_unblock_wk;
  249. u16 listen_interval;
  250. bool dead;
  251. bool uploaded;
  252. /*
  253. * frequently updated, locked with own spinlock (flaglock),
  254. * use the accessors defined below
  255. */
  256. u32 flags;
  257. /*
  258. * STA powersave frame queues, no more than the internal
  259. * locking required.
  260. */
  261. struct sk_buff_head ps_tx_buf;
  262. struct sk_buff_head tx_filtered;
  263. /* Updated from RX path only, no locking requirements */
  264. unsigned long rx_packets, rx_bytes;
  265. unsigned long wep_weak_iv_count;
  266. unsigned long last_rx;
  267. long last_connected;
  268. unsigned long num_duplicates;
  269. unsigned long rx_fragments;
  270. unsigned long rx_dropped;
  271. int last_signal;
  272. struct ewma avg_signal;
  273. /* Plus 1 for non-QoS frames */
  274. __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES + 1];
  275. /* Updated from TX status path only, no locking requirements */
  276. unsigned long tx_filtered_count;
  277. unsigned long tx_retry_failed, tx_retry_count;
  278. /* moving percentage of failed MSDUs */
  279. unsigned int fail_avg;
  280. /* Updated from TX path only, no locking requirements */
  281. unsigned long tx_packets;
  282. unsigned long tx_bytes;
  283. unsigned long tx_fragments;
  284. struct ieee80211_tx_rate last_tx_rate;
  285. int last_rx_rate_idx;
  286. int last_rx_rate_flag;
  287. u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
  288. /*
  289. * Aggregation information, locked with lock.
  290. */
  291. struct sta_ampdu_mlme ampdu_mlme;
  292. u8 timer_to_tid[STA_TID_NUM];
  293. #ifdef CONFIG_MAC80211_MESH
  294. /*
  295. * Mesh peer link attributes
  296. * TODO: move to a sub-structure that is referenced with pointer?
  297. */
  298. __le16 llid;
  299. __le16 plid;
  300. __le16 reason;
  301. u8 plink_retries;
  302. bool ignore_plink_timer;
  303. bool plink_timer_was_running;
  304. enum nl80211_plink_state plink_state;
  305. u32 plink_timeout;
  306. struct timer_list plink_timer;
  307. #endif
  308. #ifdef CONFIG_MAC80211_DEBUGFS
  309. struct sta_info_debugfsdentries {
  310. struct dentry *dir;
  311. bool add_has_run;
  312. } debugfs;
  313. #endif
  314. unsigned int lost_packets;
  315. /* keep last! */
  316. struct ieee80211_sta sta;
  317. };
  318. static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta)
  319. {
  320. #ifdef CONFIG_MAC80211_MESH
  321. return sta->plink_state;
  322. #endif
  323. return NL80211_PLINK_LISTEN;
  324. }
  325. static inline void set_sta_flags(struct sta_info *sta, const u32 flags)
  326. {
  327. unsigned long irqfl;
  328. spin_lock_irqsave(&sta->flaglock, irqfl);
  329. sta->flags |= flags;
  330. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  331. }
  332. static inline void clear_sta_flags(struct sta_info *sta, const u32 flags)
  333. {
  334. unsigned long irqfl;
  335. spin_lock_irqsave(&sta->flaglock, irqfl);
  336. sta->flags &= ~flags;
  337. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  338. }
  339. static inline u32 test_sta_flags(struct sta_info *sta, const u32 flags)
  340. {
  341. u32 ret;
  342. unsigned long irqfl;
  343. spin_lock_irqsave(&sta->flaglock, irqfl);
  344. ret = sta->flags & flags;
  345. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  346. return ret;
  347. }
  348. static inline u32 test_and_clear_sta_flags(struct sta_info *sta,
  349. const u32 flags)
  350. {
  351. u32 ret;
  352. unsigned long irqfl;
  353. spin_lock_irqsave(&sta->flaglock, irqfl);
  354. ret = sta->flags & flags;
  355. sta->flags &= ~flags;
  356. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  357. return ret;
  358. }
  359. static inline u32 get_sta_flags(struct sta_info *sta)
  360. {
  361. u32 ret;
  362. unsigned long irqfl;
  363. spin_lock_irqsave(&sta->flaglock, irqfl);
  364. ret = sta->flags;
  365. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  366. return ret;
  367. }
  368. void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
  369. struct tid_ampdu_tx *tid_tx);
  370. static inline struct tid_ampdu_tx *
  371. rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid)
  372. {
  373. return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid],
  374. lockdep_is_held(&sta->lock) ||
  375. lockdep_is_held(&sta->ampdu_mlme.mtx));
  376. }
  377. #define STA_HASH_SIZE 256
  378. #define STA_HASH(sta) (sta[5])
  379. /* Maximum number of frames to buffer per power saving station */
  380. #define STA_MAX_TX_BUFFER 128
  381. /* Minimum buffered frame expiry time. If STA uses listen interval that is
  382. * smaller than this value, the minimum value here is used instead. */
  383. #define STA_TX_BUFFER_EXPIRE (10 * HZ)
  384. /* How often station data is cleaned up (e.g., expiration of buffered frames)
  385. */
  386. #define STA_INFO_CLEANUP_INTERVAL (10 * HZ)
  387. /*
  388. * Get a STA info, must be under RCU read lock.
  389. */
  390. struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata,
  391. const u8 *addr);
  392. struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata,
  393. const u8 *addr);
  394. static inline
  395. void for_each_sta_info_type_check(struct ieee80211_local *local,
  396. const u8 *addr,
  397. struct sta_info *sta,
  398. struct sta_info *nxt)
  399. {
  400. }
  401. #define for_each_sta_info(local, _addr, _sta, nxt) \
  402. for ( /* initialise loop */ \
  403. _sta = rcu_dereference(local->sta_hash[STA_HASH(_addr)]),\
  404. nxt = _sta ? rcu_dereference(_sta->hnext) : NULL; \
  405. /* typecheck */ \
  406. for_each_sta_info_type_check(local, (_addr), _sta, nxt),\
  407. /* continue condition */ \
  408. _sta; \
  409. /* advance loop */ \
  410. _sta = nxt, \
  411. nxt = _sta ? rcu_dereference(_sta->hnext) : NULL \
  412. ) \
  413. /* compare address and run code only if it matches */ \
  414. if (memcmp(_sta->sta.addr, (_addr), ETH_ALEN) == 0)
  415. /*
  416. * Get STA info by index, BROKEN!
  417. */
  418. struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
  419. int idx);
  420. /*
  421. * Create a new STA info, caller owns returned structure
  422. * until sta_info_insert().
  423. */
  424. struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
  425. u8 *addr, gfp_t gfp);
  426. /*
  427. * Insert STA info into hash table/list, returns zero or a
  428. * -EEXIST if (if the same MAC address is already present).
  429. *
  430. * Calling the non-rcu version makes the caller relinquish,
  431. * the _rcu version calls read_lock_rcu() and must be called
  432. * without it held.
  433. */
  434. int sta_info_insert(struct sta_info *sta);
  435. int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU);
  436. int sta_info_insert_atomic(struct sta_info *sta);
  437. int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata,
  438. const u8 *addr);
  439. int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata,
  440. const u8 *addr);
  441. void sta_info_set_tim_bit(struct sta_info *sta);
  442. void sta_info_clear_tim_bit(struct sta_info *sta);
  443. void sta_info_init(struct ieee80211_local *local);
  444. void sta_info_stop(struct ieee80211_local *local);
  445. int sta_info_flush(struct ieee80211_local *local,
  446. struct ieee80211_sub_if_data *sdata);
  447. void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
  448. unsigned long exp_time);
  449. void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta);
  450. void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
  451. #endif /* STA_INFO_H */