linux-vybrid_public/arch/powerpc/boot/dts/p1010si.dtsi

/*
 * P1010si Device Tree Source
 *
 * Copyright 2011 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;
/ {
	compatible = "fsl,P1010";
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,P1010@0 {
			device_type = "cpu";
			reg = <0x0>;
			next-level-cache = <&L2>;
		};
	};

	ifc@ffe1e000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,ifc", "simple-bus";
		reg = <0x0 0xffe1e000 0 0x2000>;
		interrupts = <16 2 19 2>;
		interrupt-parent = <&mpic>;
	};

	soc@ffe00000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "fsl,p1010-immr", "simple-bus";
		ranges = <0x0  0x0 0xffe00000 0x100000>;
		bus-frequency = <0>;		// Filled out by uboot.

		ecm-law@0 {
			compatible = "fsl,ecm-law";
			reg = <0x0 0x1000>;
			fsl,num-laws = <12>;
		};

		ecm@1000 {
			compatible = "fsl,p1010-ecm", "fsl,ecm";
			reg = <0x1000 0x1000>;
			interrupts = <16 2>;
			interrupt-parent = <&mpic>;
		};

		memory-controller@2000 {
			compatible = "fsl,p1010-memory-controller";
			reg = <0x2000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <16 2>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x3100 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>;
			clock-frequency = <0>;
			interrupts = <42 2>;
			interrupt-parent = <&mpic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4600 0x100>;
			clock-frequency = <0>;
			interrupts = <42 2>;
			interrupt-parent = <&mpic>;
		};

		spi@7000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,mpc8536-espi";
			reg = <0x7000 0x1000>;
			interrupts = <59 0x2>;
			interrupt-parent = <&mpic>;
			fsl,espi-num-chipselects = <1>;
		};

		gpio: gpio-controller@f000 {
			#gpio-cells = <2>;
			compatible = "fsl,mpc8572-gpio";
			reg = <0xf000 0x100>;
			interrupts = <47 0x2>;
			interrupt-parent = <&mpic>;
			gpio-controller;
		};

		sata@18000 {
			compatible = "fsl,pq-sata-v2";
			reg = <0x18000 0x1000>;
			cell-index = <1>;
			interrupts = <74 0x2>;
			interrupt-parent = <&mpic>;
		};

		sata@19000 {
			compatible = "fsl,pq-sata-v2";
			reg = <0x19000 0x1000>;
			cell-index = <2>;
			interrupts = <41 0x2>;
			interrupt-parent = <&mpic>;
		};

		can0@1c000 {
			compatible = "fsl,flexcan-v1.0";
			reg = <0x1c000 0x1000>;
			interrupts = <48 0x2>;
			interrupt-parent = <&mpic>;
			fsl,flexcan-clock-divider = <2>;
		};

		can1@1d000 {
			compatible = "fsl,flexcan-v1.0";
			reg = <0x1d000 0x1000>;
			interrupts = <61 0x2>;
			interrupt-parent = <&mpic>;
			fsl,flexcan-clock-divider = <2>;
		};

		L2: l2-cache-controller@20000 {
			compatible = "fsl,p1010-l2-cache-controller",
					"fsl,p1014-l2-cache-controller";
			reg = <0x20000 0x1000>;
			cache-line-size = <32>;	// 32 bytes
			cache-size = <0x40000>; // L2,256K
			interrupt-parent = <&mpic>;
			interrupts = <16 2>;
		};

		dma@21300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
			reg = <0x21300 0x4>;
			ranges = <0x0 0x21100 0x200>;
			cell-index = <0>;
			dma-channel@0 {
				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupt-parent = <&mpic>;
				interrupts = <20 2>;
			};
			dma-channel@80 {
				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupt-parent = <&mpic>;
				interrupts = <21 2>;
			};
			dma-channel@100 {
				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupt-parent = <&mpic>;
				interrupts = <22 2>;
			};
			dma-channel@180 {
				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupt-parent = <&mpic>;
				interrupts = <23 2>;
			};
		};

		usb@22000 {
			compatible = "fsl-usb2-dr";
			reg = <0x22000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupt-parent = <&mpic>;
			interrupts = <28 0x2>;
			dr_mode = "host";
		};

		mdio@24000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,etsec2-mdio";
			reg = <0x24000 0x1000 0xb0030 0x4>;
		};

		mdio@25000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,etsec2-tbi";
			reg = <0x25000 0x1000 0xb1030 0x4>;
			tbi0: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};

		mdio@26000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,etsec2-tbi";
			reg = <0x26000 0x1000 0xb1030 0x4>;
			tbi1: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};

		sdhci@2e000 {
			compatible = "fsl,esdhc";
			reg = <0x2e000 0x1000>;
			interrupts = <72 0x8>;
			interrupt-parent = <&mpic>;
			/* Filled in by U-Boot */
			clock-frequency = <0>;
			fsl,sdhci-auto-cmd12;
		};

		enet0: ethernet@b0000 {
			#address-cells = <1>;
			#size-cells = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "fsl,etsec2";
			fsl,num_rx_queues = <0x8>;
			fsl,num_tx_queues = <0x8>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupt-parent = <&mpic>;

			queue-group@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0xb0000 0x1000>;
				fsl,rx-bit-map = <0xff>;
				fsl,tx-bit-map = <0xff>;
				interrupts = <29 2 30 2 34 2>;
			};

		};

		enet1: ethernet@b1000 {
			#address-cells = <1>;
			#size-cells = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "fsl,etsec2";
			fsl,num_rx_queues = <0x8>;
			fsl,num_tx_queues = <0x8>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupt-parent = <&mpic>;

			queue-group@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0xb1000 0x1000>;
				fsl,rx-bit-map = <0xff>;
				fsl,tx-bit-map = <0xff>;
				interrupts = <35 2 36 2 40 2>;
			};

		};

		enet2: ethernet@b2000 {
			#address-cells = <1>;
			#size-cells = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "fsl,etsec2";
			fsl,num_rx_queues = <0x8>;
			fsl,num_tx_queues = <0x8>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupt-parent = <&mpic>;

			queue-group@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0xb2000 0x1000>;
				fsl,rx-bit-map = <0xff>;
				fsl,tx-bit-map = <0xff>;
				interrupts = <31 2 32 2 33 2>;
			};

		};

		mpic: pic@40000 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x40000 0x40000>;
			compatible = "chrp,open-pic";
			device_type = "open-pic";
		};

		msi@41600 {
			compatible = "fsl,p1010-msi", "fsl,mpic-msi";
			reg = <0x41600 0x80>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xe0 0
				0xe1 0
				0xe2 0
				0xe3 0
				0xe4 0
				0xe5 0
				0xe6 0
				0xe7 0>;
			interrupt-parent = <&mpic>;
		};

		global-utilities@e0000 {	//global utilities block
			compatible = "fsl,p1010-guts";
			reg = <0xe0000 0x1000>;
			fsl,has-rstcr;
		};
	};

	pci0: pcie@ffe09000 {
		compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe09000 0 0x1000>;
		bus-range = <0 255>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <16 2>;
	};

	pci1: pcie@ffe0a000 {
		compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0 0xffe0a000 0 0x1000>;
		bus-range = <0 255>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <16 2>;
	};
};