at91rm9200.c 9.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369
  1. /*
  2. * arch/arm/mach-at91/at91rm9200.c
  3. *
  4. * Copyright (C) 2005 SAN People
  5. *
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License as published by
  8. * the Free Software Foundation; either version 2 of the License, or
  9. * (at your option) any later version.
  10. *
  11. */
  12. #include <linux/module.h>
  13. #include <asm/irq.h>
  14. #include <asm/mach/arch.h>
  15. #include <asm/mach/map.h>
  16. #include <mach/at91rm9200.h>
  17. #include <mach/at91_pmc.h>
  18. #include <mach/at91_st.h>
  19. #include <mach/cpu.h>
  20. #include "soc.h"
  21. #include "generic.h"
  22. #include "clock.h"
  23. static struct map_desc at91rm9200_io_desc[] __initdata = {
  24. {
  25. .virtual = AT91_VA_BASE_EMAC,
  26. .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
  27. .length = SZ_16K,
  28. .type = MT_DEVICE,
  29. },
  30. };
  31. /* --------------------------------------------------------------------
  32. * Clocks
  33. * -------------------------------------------------------------------- */
  34. /*
  35. * The peripheral clocks.
  36. */
  37. static struct clk udc_clk = {
  38. .name = "udc_clk",
  39. .pmc_mask = 1 << AT91RM9200_ID_UDP,
  40. .type = CLK_TYPE_PERIPHERAL,
  41. };
  42. static struct clk ohci_clk = {
  43. .name = "ohci_clk",
  44. .pmc_mask = 1 << AT91RM9200_ID_UHP,
  45. .type = CLK_TYPE_PERIPHERAL,
  46. };
  47. static struct clk ether_clk = {
  48. .name = "ether_clk",
  49. .pmc_mask = 1 << AT91RM9200_ID_EMAC,
  50. .type = CLK_TYPE_PERIPHERAL,
  51. };
  52. static struct clk mmc_clk = {
  53. .name = "mci_clk",
  54. .pmc_mask = 1 << AT91RM9200_ID_MCI,
  55. .type = CLK_TYPE_PERIPHERAL,
  56. };
  57. static struct clk twi_clk = {
  58. .name = "twi_clk",
  59. .pmc_mask = 1 << AT91RM9200_ID_TWI,
  60. .type = CLK_TYPE_PERIPHERAL,
  61. };
  62. static struct clk usart0_clk = {
  63. .name = "usart0_clk",
  64. .pmc_mask = 1 << AT91RM9200_ID_US0,
  65. .type = CLK_TYPE_PERIPHERAL,
  66. };
  67. static struct clk usart1_clk = {
  68. .name = "usart1_clk",
  69. .pmc_mask = 1 << AT91RM9200_ID_US1,
  70. .type = CLK_TYPE_PERIPHERAL,
  71. };
  72. static struct clk usart2_clk = {
  73. .name = "usart2_clk",
  74. .pmc_mask = 1 << AT91RM9200_ID_US2,
  75. .type = CLK_TYPE_PERIPHERAL,
  76. };
  77. static struct clk usart3_clk = {
  78. .name = "usart3_clk",
  79. .pmc_mask = 1 << AT91RM9200_ID_US3,
  80. .type = CLK_TYPE_PERIPHERAL,
  81. };
  82. static struct clk spi_clk = {
  83. .name = "spi_clk",
  84. .pmc_mask = 1 << AT91RM9200_ID_SPI,
  85. .type = CLK_TYPE_PERIPHERAL,
  86. };
  87. static struct clk pioA_clk = {
  88. .name = "pioA_clk",
  89. .pmc_mask = 1 << AT91RM9200_ID_PIOA,
  90. .type = CLK_TYPE_PERIPHERAL,
  91. };
  92. static struct clk pioB_clk = {
  93. .name = "pioB_clk",
  94. .pmc_mask = 1 << AT91RM9200_ID_PIOB,
  95. .type = CLK_TYPE_PERIPHERAL,
  96. };
  97. static struct clk pioC_clk = {
  98. .name = "pioC_clk",
  99. .pmc_mask = 1 << AT91RM9200_ID_PIOC,
  100. .type = CLK_TYPE_PERIPHERAL,
  101. };
  102. static struct clk pioD_clk = {
  103. .name = "pioD_clk",
  104. .pmc_mask = 1 << AT91RM9200_ID_PIOD,
  105. .type = CLK_TYPE_PERIPHERAL,
  106. };
  107. static struct clk ssc0_clk = {
  108. .name = "ssc0_clk",
  109. .pmc_mask = 1 << AT91RM9200_ID_SSC0,
  110. .type = CLK_TYPE_PERIPHERAL,
  111. };
  112. static struct clk ssc1_clk = {
  113. .name = "ssc1_clk",
  114. .pmc_mask = 1 << AT91RM9200_ID_SSC1,
  115. .type = CLK_TYPE_PERIPHERAL,
  116. };
  117. static struct clk ssc2_clk = {
  118. .name = "ssc2_clk",
  119. .pmc_mask = 1 << AT91RM9200_ID_SSC2,
  120. .type = CLK_TYPE_PERIPHERAL,
  121. };
  122. static struct clk tc0_clk = {
  123. .name = "tc0_clk",
  124. .pmc_mask = 1 << AT91RM9200_ID_TC0,
  125. .type = CLK_TYPE_PERIPHERAL,
  126. };
  127. static struct clk tc1_clk = {
  128. .name = "tc1_clk",
  129. .pmc_mask = 1 << AT91RM9200_ID_TC1,
  130. .type = CLK_TYPE_PERIPHERAL,
  131. };
  132. static struct clk tc2_clk = {
  133. .name = "tc2_clk",
  134. .pmc_mask = 1 << AT91RM9200_ID_TC2,
  135. .type = CLK_TYPE_PERIPHERAL,
  136. };
  137. static struct clk tc3_clk = {
  138. .name = "tc3_clk",
  139. .pmc_mask = 1 << AT91RM9200_ID_TC3,
  140. .type = CLK_TYPE_PERIPHERAL,
  141. };
  142. static struct clk tc4_clk = {
  143. .name = "tc4_clk",
  144. .pmc_mask = 1 << AT91RM9200_ID_TC4,
  145. .type = CLK_TYPE_PERIPHERAL,
  146. };
  147. static struct clk tc5_clk = {
  148. .name = "tc5_clk",
  149. .pmc_mask = 1 << AT91RM9200_ID_TC5,
  150. .type = CLK_TYPE_PERIPHERAL,
  151. };
  152. static struct clk *periph_clocks[] __initdata = {
  153. &pioA_clk,
  154. &pioB_clk,
  155. &pioC_clk,
  156. &pioD_clk,
  157. &usart0_clk,
  158. &usart1_clk,
  159. &usart2_clk,
  160. &usart3_clk,
  161. &mmc_clk,
  162. &udc_clk,
  163. &twi_clk,
  164. &spi_clk,
  165. &ssc0_clk,
  166. &ssc1_clk,
  167. &ssc2_clk,
  168. &tc0_clk,
  169. &tc1_clk,
  170. &tc2_clk,
  171. &tc3_clk,
  172. &tc4_clk,
  173. &tc5_clk,
  174. &ohci_clk,
  175. &ether_clk,
  176. // irq0 .. irq6
  177. };
  178. static struct clk_lookup periph_clocks_lookups[] = {
  179. CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
  180. CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
  181. CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
  182. CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
  183. CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
  184. CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
  185. CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
  186. CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
  187. CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
  188. };
  189. static struct clk_lookup usart_clocks_lookups[] = {
  190. CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
  191. CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
  192. CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
  193. CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
  194. CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
  195. };
  196. /*
  197. * The four programmable clocks.
  198. * You must configure pin multiplexing to bring these signals out.
  199. */
  200. static struct clk pck0 = {
  201. .name = "pck0",
  202. .pmc_mask = AT91_PMC_PCK0,
  203. .type = CLK_TYPE_PROGRAMMABLE,
  204. .id = 0,
  205. };
  206. static struct clk pck1 = {
  207. .name = "pck1",
  208. .pmc_mask = AT91_PMC_PCK1,
  209. .type = CLK_TYPE_PROGRAMMABLE,
  210. .id = 1,
  211. };
  212. static struct clk pck2 = {
  213. .name = "pck2",
  214. .pmc_mask = AT91_PMC_PCK2,
  215. .type = CLK_TYPE_PROGRAMMABLE,
  216. .id = 2,
  217. };
  218. static struct clk pck3 = {
  219. .name = "pck3",
  220. .pmc_mask = AT91_PMC_PCK3,
  221. .type = CLK_TYPE_PROGRAMMABLE,
  222. .id = 3,
  223. };
  224. static void __init at91rm9200_register_clocks(void)
  225. {
  226. int i;
  227. for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
  228. clk_register(periph_clocks[i]);
  229. clkdev_add_table(periph_clocks_lookups,
  230. ARRAY_SIZE(periph_clocks_lookups));
  231. clkdev_add_table(usart_clocks_lookups,
  232. ARRAY_SIZE(usart_clocks_lookups));
  233. clk_register(&pck0);
  234. clk_register(&pck1);
  235. clk_register(&pck2);
  236. clk_register(&pck3);
  237. }
  238. static struct clk_lookup console_clock_lookup;
  239. void __init at91rm9200_set_console_clock(int id)
  240. {
  241. if (id >= ARRAY_SIZE(usart_clocks_lookups))
  242. return;
  243. console_clock_lookup.con_id = "usart";
  244. console_clock_lookup.clk = usart_clocks_lookups[id].clk;
  245. clkdev_add(&console_clock_lookup);
  246. }
  247. /* --------------------------------------------------------------------
  248. * GPIO
  249. * -------------------------------------------------------------------- */
  250. static struct at91_gpio_bank at91rm9200_gpio[] = {
  251. {
  252. .id = AT91RM9200_ID_PIOA,
  253. .offset = AT91_PIOA,
  254. .clock = &pioA_clk,
  255. }, {
  256. .id = AT91RM9200_ID_PIOB,
  257. .offset = AT91_PIOB,
  258. .clock = &pioB_clk,
  259. }, {
  260. .id = AT91RM9200_ID_PIOC,
  261. .offset = AT91_PIOC,
  262. .clock = &pioC_clk,
  263. }, {
  264. .id = AT91RM9200_ID_PIOD,
  265. .offset = AT91_PIOD,
  266. .clock = &pioD_clk,
  267. }
  268. };
  269. static void at91rm9200_reset(void)
  270. {
  271. /*
  272. * Perform a hardware reset with the use of the Watchdog timer.
  273. */
  274. at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
  275. at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
  276. }
  277. /* --------------------------------------------------------------------
  278. * AT91RM9200 processor initialization
  279. * -------------------------------------------------------------------- */
  280. static void __init at91rm9200_map_io(void)
  281. {
  282. /* Map peripherals */
  283. at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE);
  284. iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
  285. }
  286. static void __init at91rm9200_initialize(void)
  287. {
  288. at91_arch_reset = at91rm9200_reset;
  289. at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
  290. | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
  291. | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
  292. | (1 << AT91RM9200_ID_IRQ6);
  293. /* Initialize GPIO subsystem */
  294. at91_gpio_init(at91rm9200_gpio,
  295. cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
  296. }
  297. /* --------------------------------------------------------------------
  298. * Interrupt initialization
  299. * -------------------------------------------------------------------- */
  300. /*
  301. * The default interrupt priority levels (0 = lowest, 7 = highest).
  302. */
  303. static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
  304. 7, /* Advanced Interrupt Controller (FIQ) */
  305. 7, /* System Peripherals */
  306. 1, /* Parallel IO Controller A */
  307. 1, /* Parallel IO Controller B */
  308. 1, /* Parallel IO Controller C */
  309. 1, /* Parallel IO Controller D */
  310. 5, /* USART 0 */
  311. 5, /* USART 1 */
  312. 5, /* USART 2 */
  313. 5, /* USART 3 */
  314. 0, /* Multimedia Card Interface */
  315. 2, /* USB Device Port */
  316. 6, /* Two-Wire Interface */
  317. 5, /* Serial Peripheral Interface */
  318. 4, /* Serial Synchronous Controller 0 */
  319. 4, /* Serial Synchronous Controller 1 */
  320. 4, /* Serial Synchronous Controller 2 */
  321. 0, /* Timer Counter 0 */
  322. 0, /* Timer Counter 1 */
  323. 0, /* Timer Counter 2 */
  324. 0, /* Timer Counter 3 */
  325. 0, /* Timer Counter 4 */
  326. 0, /* Timer Counter 5 */
  327. 2, /* USB Host port */
  328. 3, /* Ethernet MAC */
  329. 0, /* Advanced Interrupt Controller (IRQ0) */
  330. 0, /* Advanced Interrupt Controller (IRQ1) */
  331. 0, /* Advanced Interrupt Controller (IRQ2) */
  332. 0, /* Advanced Interrupt Controller (IRQ3) */
  333. 0, /* Advanced Interrupt Controller (IRQ4) */
  334. 0, /* Advanced Interrupt Controller (IRQ5) */
  335. 0 /* Advanced Interrupt Controller (IRQ6) */
  336. };
  337. struct at91_init_soc __initdata at91rm9200_soc = {
  338. .map_io = at91rm9200_map_io,
  339. .default_irq_priority = at91rm9200_default_irq_priority,
  340. .register_clocks = at91rm9200_register_clocks,
  341. .init = at91rm9200_initialize,
  342. };