iwl-shared.h 7.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212
  1. /******************************************************************************
  2. *
  3. * This file is provided under a dual BSD/GPLv2 license. When using or
  4. * redistributing this file, you may do so under either license.
  5. *
  6. * GPL LICENSE SUMMARY
  7. *
  8. * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
  9. *
  10. * This program is free software; you can redistribute it and/or modify
  11. * it under the terms of version 2 of the GNU General Public License as
  12. * published by the Free Software Foundation.
  13. *
  14. * This program is distributed in the hope that it will be useful, but
  15. * WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  17. * General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  22. * USA
  23. *
  24. * The full GNU General Public License is included in this distribution
  25. * in the file called LICENSE.GPL.
  26. *
  27. * Contact Information:
  28. * Intel Linux Wireless <ilw@linux.intel.com>
  29. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  30. *
  31. * BSD LICENSE
  32. *
  33. * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
  34. * All rights reserved.
  35. *
  36. * Redistribution and use in source and binary forms, with or without
  37. * modification, are permitted provided that the following conditions
  38. * are met:
  39. *
  40. * * Redistributions of source code must retain the above copyright
  41. * notice, this list of conditions and the following disclaimer.
  42. * * Redistributions in binary form must reproduce the above copyright
  43. * notice, this list of conditions and the following disclaimer in
  44. * the documentation and/or other materials provided with the
  45. * distribution.
  46. * * Neither the name Intel Corporation nor the names of its
  47. * contributors may be used to endorse or promote products derived
  48. * from this software without specific prior written permission.
  49. *
  50. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  51. * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  52. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  53. * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  54. * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  55. * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  56. * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  57. * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  58. * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  59. * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  60. * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  61. *
  62. *****************************************************************************/
  63. #ifndef __iwl_shared_h__
  64. #define __iwl_shared_h__
  65. #include <linux/types.h>
  66. #include <linux/spinlock.h>
  67. #include <linux/gfp.h>
  68. #include <net/mac80211.h>
  69. #include "iwl-commands.h"
  70. #include "iwl-fw.h"
  71. #include "iwl-config.h"
  72. /**
  73. * DOC: shared area - role and goal
  74. *
  75. * The shared area contains all the data exported by the upper layer to the
  76. * other layers. Since the bus and transport layer shouldn't dereference
  77. * iwl_priv, all the data needed by the upper layer and the transport / bus
  78. * layer must be here.
  79. * The shared area also holds pointer to all the other layers. This allows a
  80. * layer to call a function from another layer.
  81. *
  82. * NOTE: All the layers hold a pointer to the shared area which must be shrd.
  83. * A few macros assume that (_m)->shrd points to the shared area no matter
  84. * what _m is.
  85. *
  86. * gets notifications about enumeration, suspend, resume.
  87. * For the moment, the bus layer is not a linux kernel module as itself, and
  88. * the module_init function of the driver must call the bus specific
  89. * registration functions. These functions are listed at the end of this file.
  90. * For the moment, there is only one implementation of this interface: PCI-e.
  91. * This implementation is iwl-pci.c
  92. */
  93. struct iwl_priv;
  94. struct iwl_trans;
  95. struct iwl_trans_ops;
  96. #define DRV_NAME "iwlwifi"
  97. #define IWLWIFI_VERSION "in-tree:"
  98. #define DRV_COPYRIGHT "Copyright(c) 2003-2012 Intel Corporation"
  99. #define DRV_AUTHOR "<ilw@linux.intel.com>"
  100. extern struct iwl_mod_params iwlagn_mod_params;
  101. #define IWL_DISABLE_HT_ALL BIT(0)
  102. #define IWL_DISABLE_HT_TXAGG BIT(1)
  103. #define IWL_DISABLE_HT_RXAGG BIT(2)
  104. /**
  105. * struct iwl_mod_params
  106. *
  107. * Holds the module parameters
  108. *
  109. * @sw_crypto: using hardware encryption, default = 0
  110. * @disable_11n: disable 11n capabilities, default = 0,
  111. * use IWL_DISABLE_HT_* constants
  112. * @amsdu_size_8K: enable 8K amsdu size, default = 1
  113. * @restart_fw: restart firmware, default = 1
  114. * @plcp_check: enable plcp health check, default = true
  115. * @wd_disable: enable stuck queue check, default = 0
  116. * @bt_coex_active: enable bt coex, default = true
  117. * @led_mode: system default, default = 0
  118. * @power_save: disable power save, default = false
  119. * @power_level: power level, default = 1
  120. * @debug_level: levels are IWL_DL_*
  121. * @ant_coupling: antenna coupling in dB, default = 0
  122. * @bt_ch_announce: BT channel inhibition, default = enable
  123. * @auto_agg: enable agg. without check, default = true
  124. */
  125. struct iwl_mod_params {
  126. int sw_crypto;
  127. unsigned int disable_11n;
  128. int amsdu_size_8K;
  129. int restart_fw;
  130. bool plcp_check;
  131. int wd_disable;
  132. bool bt_coex_active;
  133. int led_mode;
  134. bool power_save;
  135. int power_level;
  136. u32 debug_level;
  137. int ant_coupling;
  138. bool bt_ch_announce;
  139. bool auto_agg;
  140. };
  141. /**
  142. * struct iwl_shared - shared fields for all the layers of the driver
  143. *
  144. * @wowlan: are we running wowlan uCode
  145. * @bus: pointer to the bus layer data
  146. * @cfg: see struct iwl_cfg
  147. * @priv: pointer to the upper layer data
  148. * @trans: pointer to the transport layer data
  149. * @nic: pointer to the nic data
  150. * @lock: protect general shared data
  151. * @eeprom: pointer to the eeprom/OTP image
  152. */
  153. struct iwl_shared {
  154. const struct iwl_cfg *cfg;
  155. struct iwl_trans *trans;
  156. void *drv;
  157. };
  158. /*Whatever _m is (iwl_trans, iwl_priv, these macros will work */
  159. #define cfg(_m) ((_m)->shrd->cfg)
  160. #define trans(_m) ((_m)->shrd->trans)
  161. static inline bool iwl_have_debug_level(u32 level)
  162. {
  163. return iwlagn_mod_params.debug_level & level;
  164. }
  165. enum iwl_rxon_context_id {
  166. IWL_RXON_CTX_BSS,
  167. IWL_RXON_CTX_PAN,
  168. NUM_IWL_RXON_CTX
  169. };
  170. const char *get_cmd_string(u8 cmd);
  171. #define IWL_CMD(x) case x: return #x
  172. /*****************************************************
  173. * DRIVER STATUS FUNCTIONS
  174. ******************************************************/
  175. #define STATUS_HCMD_ACTIVE 0 /* host command in progress */
  176. /* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
  177. #define STATUS_INT_ENABLED 2
  178. #define STATUS_RF_KILL_HW 3
  179. #define STATUS_CT_KILL 4
  180. #define STATUS_INIT 5
  181. #define STATUS_ALIVE 6
  182. #define STATUS_READY 7
  183. #define STATUS_TEMPERATURE 8
  184. #define STATUS_GEO_CONFIGURED 9
  185. #define STATUS_EXIT_PENDING 10
  186. #define STATUS_STATISTICS 12
  187. #define STATUS_SCANNING 13
  188. #define STATUS_SCAN_ABORTING 14
  189. #define STATUS_SCAN_HW 15
  190. #define STATUS_POWER_PMI 16
  191. #define STATUS_FW_ERROR 17
  192. #define STATUS_DEVICE_ENABLED 18
  193. #define STATUS_CHANNEL_SWITCH_PENDING 19
  194. #define STATUS_SCAN_COMPLETE 20
  195. #endif /* #__iwl_shared_h__ */