vpe.c 37 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626
  1. /*
  2. * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
  3. *
  4. * This program is free software; you can distribute it and/or modify it
  5. * under the terms of the GNU General Public License (Version 2) as
  6. * published by the Free Software Foundation.
  7. *
  8. * This program is distributed in the hope it will be useful, but WITHOUT
  9. * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10. * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  11. * for more details.
  12. *
  13. * You should have received a copy of the GNU General Public License along
  14. * with this program; if not, write to the Free Software Foundation, Inc.,
  15. * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  16. */
  17. /*
  18. * VPE support module
  19. *
  20. * Provides support for loading a MIPS SP program on VPE1.
  21. * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
  22. * (or partially linked). You should initialise your stack in the startup
  23. * code. This loader looks for the symbol __start and sets up
  24. * execution to resume from there. The MIPS SDE kit contains suitable examples.
  25. *
  26. * To load and run, simply cat a SP 'program file' to /dev/vpe1.
  27. * i.e cat spapp >/dev/vpe1.
  28. */
  29. #include <linux/kernel.h>
  30. #include <linux/device.h>
  31. #include <linux/module.h>
  32. #include <linux/fs.h>
  33. #include <linux/init.h>
  34. #include <asm/uaccess.h>
  35. #include <linux/slab.h>
  36. #include <linux/list.h>
  37. #include <linux/vmalloc.h>
  38. #include <linux/elf.h>
  39. #include <linux/seq_file.h>
  40. #include <linux/smp_lock.h>
  41. #include <linux/syscalls.h>
  42. #include <linux/moduleloader.h>
  43. #include <linux/interrupt.h>
  44. #include <linux/poll.h>
  45. #include <linux/bootmem.h>
  46. #include <asm/mipsregs.h>
  47. #include <asm/mipsmtregs.h>
  48. #include <asm/cacheflush.h>
  49. #include <asm/atomic.h>
  50. #include <asm/cpu.h>
  51. #include <asm/mips_mt.h>
  52. #include <asm/processor.h>
  53. #include <asm/system.h>
  54. #include <asm/vpe.h>
  55. #include <asm/kspd.h>
  56. typedef void *vpe_handle;
  57. #ifndef ARCH_SHF_SMALL
  58. #define ARCH_SHF_SMALL 0
  59. #endif
  60. /* If this is set, the section belongs in the init part of the module */
  61. #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
  62. /*
  63. * The number of TCs and VPEs physically available on the core
  64. */
  65. static int hw_tcs, hw_vpes;
  66. static char module_name[] = "vpe";
  67. static int major;
  68. static const int minor = 1; /* fixed for now */
  69. #ifdef CONFIG_MIPS_APSP_KSPD
  70. static struct kspd_notifications kspd_events;
  71. static int kspd_events_reqd;
  72. #endif
  73. /* grab the likely amount of memory we will need. */
  74. #ifdef CONFIG_MIPS_VPE_LOADER_TOM
  75. #define P_SIZE (2 * 1024 * 1024)
  76. #else
  77. /* add an overhead to the max kmalloc size for non-striped symbols/etc */
  78. #define P_SIZE (256 * 1024)
  79. #endif
  80. extern unsigned long physical_memsize;
  81. #define MAX_VPES 16
  82. #define VPE_PATH_MAX 256
  83. enum vpe_state {
  84. VPE_STATE_UNUSED = 0,
  85. VPE_STATE_INUSE,
  86. VPE_STATE_RUNNING
  87. };
  88. enum tc_state {
  89. TC_STATE_UNUSED = 0,
  90. TC_STATE_INUSE,
  91. TC_STATE_RUNNING,
  92. TC_STATE_DYNAMIC
  93. };
  94. struct vpe {
  95. enum vpe_state state;
  96. /* (device) minor associated with this vpe */
  97. int minor;
  98. /* elfloader stuff */
  99. void *load_addr;
  100. unsigned long len;
  101. char *pbuffer;
  102. unsigned long plen;
  103. unsigned int uid, gid;
  104. char cwd[VPE_PATH_MAX];
  105. unsigned long __start;
  106. /* tc's associated with this vpe */
  107. struct list_head tc;
  108. /* The list of vpe's */
  109. struct list_head list;
  110. /* shared symbol address */
  111. void *shared_ptr;
  112. /* the list of who wants to know when something major happens */
  113. struct list_head notify;
  114. unsigned int ntcs;
  115. };
  116. struct tc {
  117. enum tc_state state;
  118. int index;
  119. struct vpe *pvpe; /* parent VPE */
  120. struct list_head tc; /* The list of TC's with this VPE */
  121. struct list_head list; /* The global list of tc's */
  122. };
  123. struct {
  124. spinlock_t vpe_list_lock;
  125. struct list_head vpe_list; /* Virtual processing elements */
  126. spinlock_t tc_list_lock;
  127. struct list_head tc_list; /* Thread contexts */
  128. } vpecontrol = {
  129. .vpe_list_lock = SPIN_LOCK_UNLOCKED,
  130. .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
  131. .tc_list_lock = SPIN_LOCK_UNLOCKED,
  132. .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
  133. };
  134. static void release_progmem(void *ptr);
  135. /* get the vpe associated with this minor */
  136. static struct vpe *get_vpe(int minor)
  137. {
  138. struct vpe *res, *v;
  139. if (!cpu_has_mipsmt)
  140. return NULL;
  141. res = NULL;
  142. spin_lock(&vpecontrol.vpe_list_lock);
  143. list_for_each_entry(v, &vpecontrol.vpe_list, list) {
  144. if (v->minor == minor) {
  145. res = v;
  146. break;
  147. }
  148. }
  149. spin_unlock(&vpecontrol.vpe_list_lock);
  150. return res;
  151. }
  152. /* get the vpe associated with this minor */
  153. static struct tc *get_tc(int index)
  154. {
  155. struct tc *res, *t;
  156. res = NULL;
  157. spin_lock(&vpecontrol.tc_list_lock);
  158. list_for_each_entry(t, &vpecontrol.tc_list, list) {
  159. if (t->index == index) {
  160. res = t;
  161. break;
  162. }
  163. }
  164. spin_unlock(&vpecontrol.tc_list_lock);
  165. return NULL;
  166. }
  167. /* allocate a vpe and associate it with this minor (or index) */
  168. static struct vpe *alloc_vpe(int minor)
  169. {
  170. struct vpe *v;
  171. if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
  172. return NULL;
  173. INIT_LIST_HEAD(&v->tc);
  174. spin_lock(&vpecontrol.vpe_list_lock);
  175. list_add_tail(&v->list, &vpecontrol.vpe_list);
  176. spin_unlock(&vpecontrol.vpe_list_lock);
  177. INIT_LIST_HEAD(&v->notify);
  178. v->minor = minor;
  179. return v;
  180. }
  181. /* allocate a tc. At startup only tc0 is running, all other can be halted. */
  182. static struct tc *alloc_tc(int index)
  183. {
  184. struct tc *tc;
  185. if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
  186. goto out;
  187. INIT_LIST_HEAD(&tc->tc);
  188. tc->index = index;
  189. spin_lock(&vpecontrol.tc_list_lock);
  190. list_add_tail(&tc->list, &vpecontrol.tc_list);
  191. spin_unlock(&vpecontrol.tc_list_lock);
  192. out:
  193. return tc;
  194. }
  195. /* clean up and free everything */
  196. static void release_vpe(struct vpe *v)
  197. {
  198. list_del(&v->list);
  199. if (v->load_addr)
  200. release_progmem(v);
  201. kfree(v);
  202. }
  203. static void __maybe_unused dump_mtregs(void)
  204. {
  205. unsigned long val;
  206. val = read_c0_config3();
  207. printk("config3 0x%lx MT %ld\n", val,
  208. (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
  209. val = read_c0_mvpcontrol();
  210. printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
  211. (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
  212. (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
  213. (val & MVPCONTROL_EVP));
  214. val = read_c0_mvpconf0();
  215. printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
  216. (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
  217. val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
  218. }
  219. /* Find some VPE program space */
  220. static void *alloc_progmem(unsigned long len)
  221. {
  222. void *addr;
  223. #ifdef CONFIG_MIPS_VPE_LOADER_TOM
  224. /*
  225. * This means you must tell Linux to use less memory than you
  226. * physically have, for example by passing a mem= boot argument.
  227. */
  228. addr = pfn_to_kaddr(max_low_pfn);
  229. memset(addr, 0, len);
  230. #else
  231. /* simple grab some mem for now */
  232. addr = kzalloc(len, GFP_KERNEL);
  233. #endif
  234. return addr;
  235. }
  236. static void release_progmem(void *ptr)
  237. {
  238. #ifndef CONFIG_MIPS_VPE_LOADER_TOM
  239. kfree(ptr);
  240. #endif
  241. }
  242. /* Update size with this section: return offset. */
  243. static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
  244. {
  245. long ret;
  246. ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
  247. *size = ret + sechdr->sh_size;
  248. return ret;
  249. }
  250. /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
  251. might -- code, read-only data, read-write data, small data. Tally
  252. sizes, and place the offsets into sh_entsize fields: high bit means it
  253. belongs in init. */
  254. static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
  255. Elf_Shdr * sechdrs, const char *secstrings)
  256. {
  257. static unsigned long const masks[][2] = {
  258. /* NOTE: all executable code must be the first section
  259. * in this array; otherwise modify the text_size
  260. * finder in the two loops below */
  261. {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
  262. {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
  263. {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
  264. {ARCH_SHF_SMALL | SHF_ALLOC, 0}
  265. };
  266. unsigned int m, i;
  267. for (i = 0; i < hdr->e_shnum; i++)
  268. sechdrs[i].sh_entsize = ~0UL;
  269. for (m = 0; m < ARRAY_SIZE(masks); ++m) {
  270. for (i = 0; i < hdr->e_shnum; ++i) {
  271. Elf_Shdr *s = &sechdrs[i];
  272. // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
  273. if ((s->sh_flags & masks[m][0]) != masks[m][0]
  274. || (s->sh_flags & masks[m][1])
  275. || s->sh_entsize != ~0UL)
  276. continue;
  277. s->sh_entsize =
  278. get_offset((unsigned long *)&mod->core_size, s);
  279. }
  280. if (m == 0)
  281. mod->core_text_size = mod->core_size;
  282. }
  283. }
  284. /* from module-elf32.c, but subverted a little */
  285. struct mips_hi16 {
  286. struct mips_hi16 *next;
  287. Elf32_Addr *addr;
  288. Elf32_Addr value;
  289. };
  290. static struct mips_hi16 *mips_hi16_list;
  291. static unsigned int gp_offs, gp_addr;
  292. static int apply_r_mips_none(struct module *me, uint32_t *location,
  293. Elf32_Addr v)
  294. {
  295. return 0;
  296. }
  297. static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
  298. Elf32_Addr v)
  299. {
  300. int rel;
  301. if( !(*location & 0xffff) ) {
  302. rel = (int)v - gp_addr;
  303. }
  304. else {
  305. /* .sbss + gp(relative) + offset */
  306. /* kludge! */
  307. rel = (int)(short)((int)v + gp_offs +
  308. (int)(short)(*location & 0xffff) - gp_addr);
  309. }
  310. if( (rel > 32768) || (rel < -32768) ) {
  311. printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: "
  312. "relative address 0x%x out of range of gp register\n",
  313. rel);
  314. return -ENOEXEC;
  315. }
  316. *location = (*location & 0xffff0000) | (rel & 0xffff);
  317. return 0;
  318. }
  319. static int apply_r_mips_pc16(struct module *me, uint32_t *location,
  320. Elf32_Addr v)
  321. {
  322. int rel;
  323. rel = (((unsigned int)v - (unsigned int)location));
  324. rel >>= 2; // because the offset is in _instructions_ not bytes.
  325. rel -= 1; // and one instruction less due to the branch delay slot.
  326. if( (rel > 32768) || (rel < -32768) ) {
  327. printk(KERN_DEBUG "VPE loader: "
  328. "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
  329. return -ENOEXEC;
  330. }
  331. *location = (*location & 0xffff0000) | (rel & 0xffff);
  332. return 0;
  333. }
  334. static int apply_r_mips_32(struct module *me, uint32_t *location,
  335. Elf32_Addr v)
  336. {
  337. *location += v;
  338. return 0;
  339. }
  340. static int apply_r_mips_26(struct module *me, uint32_t *location,
  341. Elf32_Addr v)
  342. {
  343. if (v % 4) {
  344. printk(KERN_DEBUG "VPE loader: apply_r_mips_26 "
  345. " unaligned relocation\n");
  346. return -ENOEXEC;
  347. }
  348. /*
  349. * Not desperately convinced this is a good check of an overflow condition
  350. * anyway. But it gets in the way of handling undefined weak symbols which
  351. * we want to set to zero.
  352. * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
  353. * printk(KERN_ERR
  354. * "module %s: relocation overflow\n",
  355. * me->name);
  356. * return -ENOEXEC;
  357. * }
  358. */
  359. *location = (*location & ~0x03ffffff) |
  360. ((*location + (v >> 2)) & 0x03ffffff);
  361. return 0;
  362. }
  363. static int apply_r_mips_hi16(struct module *me, uint32_t *location,
  364. Elf32_Addr v)
  365. {
  366. struct mips_hi16 *n;
  367. /*
  368. * We cannot relocate this one now because we don't know the value of
  369. * the carry we need to add. Save the information, and let LO16 do the
  370. * actual relocation.
  371. */
  372. n = kmalloc(sizeof *n, GFP_KERNEL);
  373. if (!n)
  374. return -ENOMEM;
  375. n->addr = location;
  376. n->value = v;
  377. n->next = mips_hi16_list;
  378. mips_hi16_list = n;
  379. return 0;
  380. }
  381. static int apply_r_mips_lo16(struct module *me, uint32_t *location,
  382. Elf32_Addr v)
  383. {
  384. unsigned long insnlo = *location;
  385. Elf32_Addr val, vallo;
  386. struct mips_hi16 *l, *next;
  387. /* Sign extend the addend we extract from the lo insn. */
  388. vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
  389. if (mips_hi16_list != NULL) {
  390. l = mips_hi16_list;
  391. while (l != NULL) {
  392. unsigned long insn;
  393. /*
  394. * The value for the HI16 had best be the same.
  395. */
  396. if (v != l->value) {
  397. printk(KERN_DEBUG "VPE loader: "
  398. "apply_r_mips_lo16/hi16: \t"
  399. "inconsistent value information\n");
  400. goto out_free;
  401. }
  402. /*
  403. * Do the HI16 relocation. Note that we actually don't
  404. * need to know anything about the LO16 itself, except
  405. * where to find the low 16 bits of the addend needed
  406. * by the LO16.
  407. */
  408. insn = *l->addr;
  409. val = ((insn & 0xffff) << 16) + vallo;
  410. val += v;
  411. /*
  412. * Account for the sign extension that will happen in
  413. * the low bits.
  414. */
  415. val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
  416. insn = (insn & ~0xffff) | val;
  417. *l->addr = insn;
  418. next = l->next;
  419. kfree(l);
  420. l = next;
  421. }
  422. mips_hi16_list = NULL;
  423. }
  424. /*
  425. * Ok, we're done with the HI16 relocs. Now deal with the LO16.
  426. */
  427. val = v + vallo;
  428. insnlo = (insnlo & ~0xffff) | (val & 0xffff);
  429. *location = insnlo;
  430. return 0;
  431. out_free:
  432. while (l != NULL) {
  433. next = l->next;
  434. kfree(l);
  435. l = next;
  436. }
  437. mips_hi16_list = NULL;
  438. return -ENOEXEC;
  439. }
  440. static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
  441. Elf32_Addr v) = {
  442. [R_MIPS_NONE] = apply_r_mips_none,
  443. [R_MIPS_32] = apply_r_mips_32,
  444. [R_MIPS_26] = apply_r_mips_26,
  445. [R_MIPS_HI16] = apply_r_mips_hi16,
  446. [R_MIPS_LO16] = apply_r_mips_lo16,
  447. [R_MIPS_GPREL16] = apply_r_mips_gprel16,
  448. [R_MIPS_PC16] = apply_r_mips_pc16
  449. };
  450. static char *rstrs[] = {
  451. [R_MIPS_NONE] = "MIPS_NONE",
  452. [R_MIPS_32] = "MIPS_32",
  453. [R_MIPS_26] = "MIPS_26",
  454. [R_MIPS_HI16] = "MIPS_HI16",
  455. [R_MIPS_LO16] = "MIPS_LO16",
  456. [R_MIPS_GPREL16] = "MIPS_GPREL16",
  457. [R_MIPS_PC16] = "MIPS_PC16"
  458. };
  459. static int apply_relocations(Elf32_Shdr *sechdrs,
  460. const char *strtab,
  461. unsigned int symindex,
  462. unsigned int relsec,
  463. struct module *me)
  464. {
  465. Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
  466. Elf32_Sym *sym;
  467. uint32_t *location;
  468. unsigned int i;
  469. Elf32_Addr v;
  470. int res;
  471. for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
  472. Elf32_Word r_info = rel[i].r_info;
  473. /* This is where to make the change */
  474. location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
  475. + rel[i].r_offset;
  476. /* This is the symbol it is referring to */
  477. sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
  478. + ELF32_R_SYM(r_info);
  479. if (!sym->st_value) {
  480. printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
  481. me->name, strtab + sym->st_name);
  482. /* just print the warning, dont barf */
  483. }
  484. v = sym->st_value;
  485. res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
  486. if( res ) {
  487. char *r = rstrs[ELF32_R_TYPE(r_info)];
  488. printk(KERN_WARNING "VPE loader: .text+0x%x "
  489. "relocation type %s for symbol \"%s\" failed\n",
  490. rel[i].r_offset, r ? r : "UNKNOWN",
  491. strtab + sym->st_name);
  492. return res;
  493. }
  494. }
  495. return 0;
  496. }
  497. static inline void save_gp_address(unsigned int secbase, unsigned int rel)
  498. {
  499. gp_addr = secbase + rel;
  500. gp_offs = gp_addr - (secbase & 0xffff0000);
  501. }
  502. /* end module-elf32.c */
  503. /* Change all symbols so that sh_value encodes the pointer directly. */
  504. static void simplify_symbols(Elf_Shdr * sechdrs,
  505. unsigned int symindex,
  506. const char *strtab,
  507. const char *secstrings,
  508. unsigned int nsecs, struct module *mod)
  509. {
  510. Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
  511. unsigned long secbase, bssbase = 0;
  512. unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
  513. int size;
  514. /* find the .bss section for COMMON symbols */
  515. for (i = 0; i < nsecs; i++) {
  516. if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) {
  517. bssbase = sechdrs[i].sh_addr;
  518. break;
  519. }
  520. }
  521. for (i = 1; i < n; i++) {
  522. switch (sym[i].st_shndx) {
  523. case SHN_COMMON:
  524. /* Allocate space for the symbol in the .bss section.
  525. st_value is currently size.
  526. We want it to have the address of the symbol. */
  527. size = sym[i].st_value;
  528. sym[i].st_value = bssbase;
  529. bssbase += size;
  530. break;
  531. case SHN_ABS:
  532. /* Don't need to do anything */
  533. break;
  534. case SHN_UNDEF:
  535. /* ret = -ENOENT; */
  536. break;
  537. case SHN_MIPS_SCOMMON:
  538. printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
  539. "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
  540. sym[i].st_shndx);
  541. // .sbss section
  542. break;
  543. default:
  544. secbase = sechdrs[sym[i].st_shndx].sh_addr;
  545. if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
  546. save_gp_address(secbase, sym[i].st_value);
  547. }
  548. sym[i].st_value += secbase;
  549. break;
  550. }
  551. }
  552. }
  553. #ifdef DEBUG_ELFLOADER
  554. static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
  555. const char *strtab, struct module *mod)
  556. {
  557. Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
  558. unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
  559. printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
  560. for (i = 1; i < n; i++) {
  561. printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
  562. strtab + sym[i].st_name, sym[i].st_value);
  563. }
  564. }
  565. #endif
  566. /* We are prepared so configure and start the VPE... */
  567. static int vpe_run(struct vpe * v)
  568. {
  569. unsigned long flags, val, dmt_flag;
  570. struct vpe_notifications *n;
  571. unsigned int vpeflags;
  572. struct tc *t;
  573. /* check we are the Master VPE */
  574. local_irq_save(flags);
  575. val = read_c0_vpeconf0();
  576. if (!(val & VPECONF0_MVP)) {
  577. printk(KERN_WARNING
  578. "VPE loader: only Master VPE's are allowed to configure MT\n");
  579. local_irq_restore(flags);
  580. return -1;
  581. }
  582. dmt_flag = dmt();
  583. vpeflags = dvpe();
  584. if (!list_empty(&v->tc)) {
  585. if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
  586. evpe(vpeflags);
  587. emt(dmt_flag);
  588. local_irq_restore(flags);
  589. printk(KERN_WARNING
  590. "VPE loader: TC %d is already in use.\n",
  591. t->index);
  592. return -ENOEXEC;
  593. }
  594. } else {
  595. evpe(vpeflags);
  596. emt(dmt_flag);
  597. local_irq_restore(flags);
  598. printk(KERN_WARNING
  599. "VPE loader: No TC's associated with VPE %d\n",
  600. v->minor);
  601. return -ENOEXEC;
  602. }
  603. /* Put MVPE's into 'configuration state' */
  604. set_c0_mvpcontrol(MVPCONTROL_VPC);
  605. settc(t->index);
  606. /* should check it is halted, and not activated */
  607. if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
  608. evpe(vpeflags);
  609. emt(dmt_flag);
  610. local_irq_restore(flags);
  611. printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
  612. t->index);
  613. return -ENOEXEC;
  614. }
  615. /* Write the address we want it to start running from in the TCPC register. */
  616. write_tc_c0_tcrestart((unsigned long)v->__start);
  617. write_tc_c0_tccontext((unsigned long)0);
  618. /*
  619. * Mark the TC as activated, not interrupt exempt and not dynamically
  620. * allocatable
  621. */
  622. val = read_tc_c0_tcstatus();
  623. val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
  624. write_tc_c0_tcstatus(val);
  625. write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
  626. /*
  627. * The sde-kit passes 'memsize' to __start in $a3, so set something
  628. * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
  629. * DFLT_HEAP_SIZE when you compile your program
  630. */
  631. mttgpr(6, v->ntcs);
  632. mttgpr(7, physical_memsize);
  633. /* set up VPE1 */
  634. /*
  635. * bind the TC to VPE 1 as late as possible so we only have the final
  636. * VPE registers to set up, and so an EJTAG probe can trigger on it
  637. */
  638. write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
  639. write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
  640. back_to_back_c0_hazard();
  641. /* Set up the XTC bit in vpeconf0 to point at our tc */
  642. write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
  643. | (t->index << VPECONF0_XTC_SHIFT));
  644. back_to_back_c0_hazard();
  645. /* enable this VPE */
  646. write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
  647. /* clear out any left overs from a previous program */
  648. write_vpe_c0_status(0);
  649. write_vpe_c0_cause(0);
  650. /* take system out of configuration state */
  651. clear_c0_mvpcontrol(MVPCONTROL_VPC);
  652. /*
  653. * SMTC/SMVP kernels manage VPE enable independently,
  654. * but uniprocessor kernels need to turn it on, even
  655. * if that wasn't the pre-dvpe() state.
  656. */
  657. #ifdef CONFIG_SMP
  658. evpe(vpeflags);
  659. #else
  660. evpe(EVPE_ENABLE);
  661. #endif
  662. emt(dmt_flag);
  663. local_irq_restore(flags);
  664. list_for_each_entry(n, &v->notify, list)
  665. n->start(minor);
  666. return 0;
  667. }
  668. static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
  669. unsigned int symindex, const char *strtab,
  670. struct module *mod)
  671. {
  672. Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
  673. unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
  674. for (i = 1; i < n; i++) {
  675. if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
  676. v->__start = sym[i].st_value;
  677. }
  678. if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
  679. v->shared_ptr = (void *)sym[i].st_value;
  680. }
  681. }
  682. if ( (v->__start == 0) || (v->shared_ptr == NULL))
  683. return -1;
  684. return 0;
  685. }
  686. /*
  687. * Allocates a VPE with some program code space(the load address), copies the
  688. * contents of the program (p)buffer performing relocatations/etc, free's it
  689. * when finished.
  690. */
  691. static int vpe_elfload(struct vpe * v)
  692. {
  693. Elf_Ehdr *hdr;
  694. Elf_Shdr *sechdrs;
  695. long err = 0;
  696. char *secstrings, *strtab = NULL;
  697. unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
  698. struct module mod; // so we can re-use the relocations code
  699. memset(&mod, 0, sizeof(struct module));
  700. strcpy(mod.name, "VPE loader");
  701. hdr = (Elf_Ehdr *) v->pbuffer;
  702. len = v->plen;
  703. /* Sanity checks against insmoding binaries or wrong arch,
  704. weird elf version */
  705. if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
  706. || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
  707. || !elf_check_arch(hdr)
  708. || hdr->e_shentsize != sizeof(*sechdrs)) {
  709. printk(KERN_WARNING
  710. "VPE loader: program wrong arch or weird elf version\n");
  711. return -ENOEXEC;
  712. }
  713. if (hdr->e_type == ET_REL)
  714. relocate = 1;
  715. if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
  716. printk(KERN_ERR "VPE loader: program length %u truncated\n",
  717. len);
  718. return -ENOEXEC;
  719. }
  720. /* Convenience variables */
  721. sechdrs = (void *)hdr + hdr->e_shoff;
  722. secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
  723. sechdrs[0].sh_addr = 0;
  724. /* And these should exist, but gcc whinges if we don't init them */
  725. symindex = strindex = 0;
  726. if (relocate) {
  727. for (i = 1; i < hdr->e_shnum; i++) {
  728. if (sechdrs[i].sh_type != SHT_NOBITS
  729. && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
  730. printk(KERN_ERR "VPE program length %u truncated\n",
  731. len);
  732. return -ENOEXEC;
  733. }
  734. /* Mark all sections sh_addr with their address in the
  735. temporary image. */
  736. sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
  737. /* Internal symbols and strings. */
  738. if (sechdrs[i].sh_type == SHT_SYMTAB) {
  739. symindex = i;
  740. strindex = sechdrs[i].sh_link;
  741. strtab = (char *)hdr + sechdrs[strindex].sh_offset;
  742. }
  743. }
  744. layout_sections(&mod, hdr, sechdrs, secstrings);
  745. }
  746. v->load_addr = alloc_progmem(mod.core_size);
  747. if (!v->load_addr)
  748. return -ENOMEM;
  749. pr_info("VPE loader: loading to %p\n", v->load_addr);
  750. if (relocate) {
  751. for (i = 0; i < hdr->e_shnum; i++) {
  752. void *dest;
  753. if (!(sechdrs[i].sh_flags & SHF_ALLOC))
  754. continue;
  755. dest = v->load_addr + sechdrs[i].sh_entsize;
  756. if (sechdrs[i].sh_type != SHT_NOBITS)
  757. memcpy(dest, (void *)sechdrs[i].sh_addr,
  758. sechdrs[i].sh_size);
  759. /* Update sh_addr to point to copy in image. */
  760. sechdrs[i].sh_addr = (unsigned long)dest;
  761. printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n",
  762. secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
  763. }
  764. /* Fix up syms, so that st_value is a pointer to location. */
  765. simplify_symbols(sechdrs, symindex, strtab, secstrings,
  766. hdr->e_shnum, &mod);
  767. /* Now do relocations. */
  768. for (i = 1; i < hdr->e_shnum; i++) {
  769. const char *strtab = (char *)sechdrs[strindex].sh_addr;
  770. unsigned int info = sechdrs[i].sh_info;
  771. /* Not a valid relocation section? */
  772. if (info >= hdr->e_shnum)
  773. continue;
  774. /* Don't bother with non-allocated sections */
  775. if (!(sechdrs[info].sh_flags & SHF_ALLOC))
  776. continue;
  777. if (sechdrs[i].sh_type == SHT_REL)
  778. err = apply_relocations(sechdrs, strtab, symindex, i,
  779. &mod);
  780. else if (sechdrs[i].sh_type == SHT_RELA)
  781. err = apply_relocate_add(sechdrs, strtab, symindex, i,
  782. &mod);
  783. if (err < 0)
  784. return err;
  785. }
  786. } else {
  787. struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
  788. for (i = 0; i < hdr->e_phnum; i++) {
  789. if (phdr->p_type == PT_LOAD) {
  790. memcpy((void *)phdr->p_paddr,
  791. (char *)hdr + phdr->p_offset,
  792. phdr->p_filesz);
  793. memset((void *)phdr->p_paddr + phdr->p_filesz,
  794. 0, phdr->p_memsz - phdr->p_filesz);
  795. }
  796. phdr++;
  797. }
  798. for (i = 0; i < hdr->e_shnum; i++) {
  799. /* Internal symbols and strings. */
  800. if (sechdrs[i].sh_type == SHT_SYMTAB) {
  801. symindex = i;
  802. strindex = sechdrs[i].sh_link;
  803. strtab = (char *)hdr + sechdrs[strindex].sh_offset;
  804. /* mark the symtab's address for when we try to find the
  805. magic symbols */
  806. sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
  807. }
  808. }
  809. }
  810. /* make sure it's physically written out */
  811. flush_icache_range((unsigned long)v->load_addr,
  812. (unsigned long)v->load_addr + v->len);
  813. if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
  814. if (v->__start == 0) {
  815. printk(KERN_WARNING "VPE loader: program does not contain "
  816. "a __start symbol\n");
  817. return -ENOEXEC;
  818. }
  819. if (v->shared_ptr == NULL)
  820. printk(KERN_WARNING "VPE loader: "
  821. "program does not contain vpe_shared symbol.\n"
  822. " Unable to use AMVP (AP/SP) facilities.\n");
  823. }
  824. printk(" elf loaded\n");
  825. return 0;
  826. }
  827. static void cleanup_tc(struct tc *tc)
  828. {
  829. unsigned long flags;
  830. unsigned int mtflags, vpflags;
  831. int tmp;
  832. local_irq_save(flags);
  833. mtflags = dmt();
  834. vpflags = dvpe();
  835. /* Put MVPE's into 'configuration state' */
  836. set_c0_mvpcontrol(MVPCONTROL_VPC);
  837. settc(tc->index);
  838. tmp = read_tc_c0_tcstatus();
  839. /* mark not allocated and not dynamically allocatable */
  840. tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
  841. tmp |= TCSTATUS_IXMT; /* interrupt exempt */
  842. write_tc_c0_tcstatus(tmp);
  843. write_tc_c0_tchalt(TCHALT_H);
  844. mips_ihb();
  845. /* bind it to anything other than VPE1 */
  846. // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
  847. clear_c0_mvpcontrol(MVPCONTROL_VPC);
  848. evpe(vpflags);
  849. emt(mtflags);
  850. local_irq_restore(flags);
  851. }
  852. static int getcwd(char *buff, int size)
  853. {
  854. mm_segment_t old_fs;
  855. int ret;
  856. old_fs = get_fs();
  857. set_fs(KERNEL_DS);
  858. ret = sys_getcwd(buff, size);
  859. set_fs(old_fs);
  860. return ret;
  861. }
  862. /* checks VPE is unused and gets ready to load program */
  863. static int vpe_open(struct inode *inode, struct file *filp)
  864. {
  865. enum vpe_state state;
  866. struct vpe_notifications *not;
  867. struct vpe *v;
  868. int ret;
  869. if (minor != iminor(inode)) {
  870. /* assume only 1 device at the moment. */
  871. pr_warning("VPE loader: only vpe1 is supported\n");
  872. return -ENODEV;
  873. }
  874. if ((v = get_vpe(tclimit)) == NULL) {
  875. pr_warning("VPE loader: unable to get vpe\n");
  876. return -ENODEV;
  877. }
  878. state = xchg(&v->state, VPE_STATE_INUSE);
  879. if (state != VPE_STATE_UNUSED) {
  880. printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
  881. list_for_each_entry(not, &v->notify, list) {
  882. not->stop(tclimit);
  883. }
  884. release_progmem(v->load_addr);
  885. cleanup_tc(get_tc(tclimit));
  886. }
  887. /* this of-course trashes what was there before... */
  888. v->pbuffer = vmalloc(P_SIZE);
  889. v->plen = P_SIZE;
  890. v->load_addr = NULL;
  891. v->len = 0;
  892. v->uid = filp->f_cred->fsuid;
  893. v->gid = filp->f_cred->fsgid;
  894. #ifdef CONFIG_MIPS_APSP_KSPD
  895. /* get kspd to tell us when a syscall_exit happens */
  896. if (!kspd_events_reqd) {
  897. kspd_notify(&kspd_events);
  898. kspd_events_reqd++;
  899. }
  900. #endif
  901. v->cwd[0] = 0;
  902. ret = getcwd(v->cwd, VPE_PATH_MAX);
  903. if (ret < 0)
  904. printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret);
  905. v->shared_ptr = NULL;
  906. v->__start = 0;
  907. unlock_kernel();
  908. return 0;
  909. }
  910. static int vpe_release(struct inode *inode, struct file *filp)
  911. {
  912. struct vpe *v;
  913. Elf_Ehdr *hdr;
  914. int ret = 0;
  915. v = get_vpe(tclimit);
  916. if (v == NULL)
  917. return -ENODEV;
  918. hdr = (Elf_Ehdr *) v->pbuffer;
  919. if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
  920. if (vpe_elfload(v) >= 0) {
  921. vpe_run(v);
  922. } else {
  923. printk(KERN_WARNING "VPE loader: ELF load failed.\n");
  924. ret = -ENOEXEC;
  925. }
  926. } else {
  927. printk(KERN_WARNING "VPE loader: only elf files are supported\n");
  928. ret = -ENOEXEC;
  929. }
  930. /* It's good to be able to run the SP and if it chokes have a look at
  931. the /dev/rt?. But if we reset the pointer to the shared struct we
  932. lose what has happened. So perhaps if garbage is sent to the vpe
  933. device, use it as a trigger for the reset. Hopefully a nice
  934. executable will be along shortly. */
  935. if (ret < 0)
  936. v->shared_ptr = NULL;
  937. // cleanup any temp buffers
  938. if (v->pbuffer)
  939. vfree(v->pbuffer);
  940. v->plen = 0;
  941. return ret;
  942. }
  943. static ssize_t vpe_write(struct file *file, const char __user * buffer,
  944. size_t count, loff_t * ppos)
  945. {
  946. size_t ret = count;
  947. struct vpe *v;
  948. if (iminor(file->f_path.dentry->d_inode) != minor)
  949. return -ENODEV;
  950. v = get_vpe(tclimit);
  951. if (v == NULL)
  952. return -ENODEV;
  953. if (v->pbuffer == NULL) {
  954. printk(KERN_ERR "VPE loader: no buffer for program\n");
  955. return -ENOMEM;
  956. }
  957. if ((count + v->len) > v->plen) {
  958. printk(KERN_WARNING
  959. "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
  960. return -ENOMEM;
  961. }
  962. count -= copy_from_user(v->pbuffer + v->len, buffer, count);
  963. if (!count)
  964. return -EFAULT;
  965. v->len += count;
  966. return ret;
  967. }
  968. static const struct file_operations vpe_fops = {
  969. .owner = THIS_MODULE,
  970. .open = vpe_open,
  971. .release = vpe_release,
  972. .write = vpe_write
  973. };
  974. /* module wrapper entry points */
  975. /* give me a vpe */
  976. vpe_handle vpe_alloc(void)
  977. {
  978. int i;
  979. struct vpe *v;
  980. /* find a vpe */
  981. for (i = 1; i < MAX_VPES; i++) {
  982. if ((v = get_vpe(i)) != NULL) {
  983. v->state = VPE_STATE_INUSE;
  984. return v;
  985. }
  986. }
  987. return NULL;
  988. }
  989. EXPORT_SYMBOL(vpe_alloc);
  990. /* start running from here */
  991. int vpe_start(vpe_handle vpe, unsigned long start)
  992. {
  993. struct vpe *v = vpe;
  994. v->__start = start;
  995. return vpe_run(v);
  996. }
  997. EXPORT_SYMBOL(vpe_start);
  998. /* halt it for now */
  999. int vpe_stop(vpe_handle vpe)
  1000. {
  1001. struct vpe *v = vpe;
  1002. struct tc *t;
  1003. unsigned int evpe_flags;
  1004. evpe_flags = dvpe();
  1005. if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
  1006. settc(t->index);
  1007. write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
  1008. }
  1009. evpe(evpe_flags);
  1010. return 0;
  1011. }
  1012. EXPORT_SYMBOL(vpe_stop);
  1013. /* I've done with it thank you */
  1014. int vpe_free(vpe_handle vpe)
  1015. {
  1016. struct vpe *v = vpe;
  1017. struct tc *t;
  1018. unsigned int evpe_flags;
  1019. if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
  1020. return -ENOEXEC;
  1021. }
  1022. evpe_flags = dvpe();
  1023. /* Put MVPE's into 'configuration state' */
  1024. set_c0_mvpcontrol(MVPCONTROL_VPC);
  1025. settc(t->index);
  1026. write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
  1027. /* halt the TC */
  1028. write_tc_c0_tchalt(TCHALT_H);
  1029. mips_ihb();
  1030. /* mark the TC unallocated */
  1031. write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
  1032. v->state = VPE_STATE_UNUSED;
  1033. clear_c0_mvpcontrol(MVPCONTROL_VPC);
  1034. evpe(evpe_flags);
  1035. return 0;
  1036. }
  1037. EXPORT_SYMBOL(vpe_free);
  1038. void *vpe_get_shared(int index)
  1039. {
  1040. struct vpe *v;
  1041. if ((v = get_vpe(index)) == NULL)
  1042. return NULL;
  1043. return v->shared_ptr;
  1044. }
  1045. EXPORT_SYMBOL(vpe_get_shared);
  1046. int vpe_getuid(int index)
  1047. {
  1048. struct vpe *v;
  1049. if ((v = get_vpe(index)) == NULL)
  1050. return -1;
  1051. return v->uid;
  1052. }
  1053. EXPORT_SYMBOL(vpe_getuid);
  1054. int vpe_getgid(int index)
  1055. {
  1056. struct vpe *v;
  1057. if ((v = get_vpe(index)) == NULL)
  1058. return -1;
  1059. return v->gid;
  1060. }
  1061. EXPORT_SYMBOL(vpe_getgid);
  1062. int vpe_notify(int index, struct vpe_notifications *notify)
  1063. {
  1064. struct vpe *v;
  1065. if ((v = get_vpe(index)) == NULL)
  1066. return -1;
  1067. list_add(&notify->list, &v->notify);
  1068. return 0;
  1069. }
  1070. EXPORT_SYMBOL(vpe_notify);
  1071. char *vpe_getcwd(int index)
  1072. {
  1073. struct vpe *v;
  1074. if ((v = get_vpe(index)) == NULL)
  1075. return NULL;
  1076. return v->cwd;
  1077. }
  1078. EXPORT_SYMBOL(vpe_getcwd);
  1079. #ifdef CONFIG_MIPS_APSP_KSPD
  1080. static void kspd_sp_exit( int sp_id)
  1081. {
  1082. cleanup_tc(get_tc(sp_id));
  1083. }
  1084. #endif
  1085. static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
  1086. const char *buf, size_t len)
  1087. {
  1088. struct vpe *vpe = get_vpe(tclimit);
  1089. struct vpe_notifications *not;
  1090. list_for_each_entry(not, &vpe->notify, list) {
  1091. not->stop(tclimit);
  1092. }
  1093. release_progmem(vpe->load_addr);
  1094. cleanup_tc(get_tc(tclimit));
  1095. vpe_stop(vpe);
  1096. vpe_free(vpe);
  1097. return len;
  1098. }
  1099. static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr,
  1100. char *buf)
  1101. {
  1102. struct vpe *vpe = get_vpe(tclimit);
  1103. return sprintf(buf, "%d\n", vpe->ntcs);
  1104. }
  1105. static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
  1106. const char *buf, size_t len)
  1107. {
  1108. struct vpe *vpe = get_vpe(tclimit);
  1109. unsigned long new;
  1110. char *endp;
  1111. new = simple_strtoul(buf, &endp, 0);
  1112. if (endp == buf)
  1113. goto out_einval;
  1114. if (new == 0 || new > (hw_tcs - tclimit))
  1115. goto out_einval;
  1116. vpe->ntcs = new;
  1117. return len;
  1118. out_einval:
  1119. return -EINVAL;
  1120. }
  1121. static struct device_attribute vpe_class_attributes[] = {
  1122. __ATTR(kill, S_IWUSR, NULL, store_kill),
  1123. __ATTR(ntcs, S_IRUGO | S_IWUSR, show_ntcs, store_ntcs),
  1124. {}
  1125. };
  1126. static void vpe_device_release(struct device *cd)
  1127. {
  1128. kfree(cd);
  1129. }
  1130. struct class vpe_class = {
  1131. .name = "vpe",
  1132. .owner = THIS_MODULE,
  1133. .dev_release = vpe_device_release,
  1134. .dev_attrs = vpe_class_attributes,
  1135. };
  1136. struct device vpe_device;
  1137. static int __init vpe_module_init(void)
  1138. {
  1139. unsigned int mtflags, vpflags;
  1140. unsigned long flags, val;
  1141. struct vpe *v = NULL;
  1142. struct tc *t;
  1143. int tc, err;
  1144. if (!cpu_has_mipsmt) {
  1145. printk("VPE loader: not a MIPS MT capable processor\n");
  1146. return -ENODEV;
  1147. }
  1148. if (vpelimit == 0) {
  1149. printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
  1150. "initializing VPE loader.\nPass maxvpes=<n> argument as "
  1151. "kernel argument\n");
  1152. return -ENODEV;
  1153. }
  1154. if (tclimit == 0) {
  1155. printk(KERN_WARNING "No TCs reserved for AP/SP, not "
  1156. "initializing VPE loader.\nPass maxtcs=<n> argument as "
  1157. "kernel argument\n");
  1158. return -ENODEV;
  1159. }
  1160. major = register_chrdev(0, module_name, &vpe_fops);
  1161. if (major < 0) {
  1162. printk("VPE loader: unable to register character device\n");
  1163. return major;
  1164. }
  1165. err = class_register(&vpe_class);
  1166. if (err) {
  1167. printk(KERN_ERR "vpe_class registration failed\n");
  1168. goto out_chrdev;
  1169. }
  1170. device_initialize(&vpe_device);
  1171. vpe_device.class = &vpe_class,
  1172. vpe_device.parent = NULL,
  1173. dev_set_name(&vpe_device, "vpe1");
  1174. vpe_device.devt = MKDEV(major, minor);
  1175. err = device_add(&vpe_device);
  1176. if (err) {
  1177. printk(KERN_ERR "Adding vpe_device failed\n");
  1178. goto out_class;
  1179. }
  1180. local_irq_save(flags);
  1181. mtflags = dmt();
  1182. vpflags = dvpe();
  1183. /* Put MVPE's into 'configuration state' */
  1184. set_c0_mvpcontrol(MVPCONTROL_VPC);
  1185. /* dump_mtregs(); */
  1186. val = read_c0_mvpconf0();
  1187. hw_tcs = (val & MVPCONF0_PTC) + 1;
  1188. hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
  1189. for (tc = tclimit; tc < hw_tcs; tc++) {
  1190. /*
  1191. * Must re-enable multithreading temporarily or in case we
  1192. * reschedule send IPIs or similar we might hang.
  1193. */
  1194. clear_c0_mvpcontrol(MVPCONTROL_VPC);
  1195. evpe(vpflags);
  1196. emt(mtflags);
  1197. local_irq_restore(flags);
  1198. t = alloc_tc(tc);
  1199. if (!t) {
  1200. err = -ENOMEM;
  1201. goto out;
  1202. }
  1203. local_irq_save(flags);
  1204. mtflags = dmt();
  1205. vpflags = dvpe();
  1206. set_c0_mvpcontrol(MVPCONTROL_VPC);
  1207. /* VPE's */
  1208. if (tc < hw_tcs) {
  1209. settc(tc);
  1210. if ((v = alloc_vpe(tc)) == NULL) {
  1211. printk(KERN_WARNING "VPE: unable to allocate VPE\n");
  1212. goto out_reenable;
  1213. }
  1214. v->ntcs = hw_tcs - tclimit;
  1215. /* add the tc to the list of this vpe's tc's. */
  1216. list_add(&t->tc, &v->tc);
  1217. /* deactivate all but vpe0 */
  1218. if (tc >= tclimit) {
  1219. unsigned long tmp = read_vpe_c0_vpeconf0();
  1220. tmp &= ~VPECONF0_VPA;
  1221. /* master VPE */
  1222. tmp |= VPECONF0_MVP;
  1223. write_vpe_c0_vpeconf0(tmp);
  1224. }
  1225. /* disable multi-threading with TC's */
  1226. write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
  1227. if (tc >= vpelimit) {
  1228. /*
  1229. * Set config to be the same as vpe0,
  1230. * particularly kseg0 coherency alg
  1231. */
  1232. write_vpe_c0_config(read_c0_config());
  1233. }
  1234. }
  1235. /* TC's */
  1236. t->pvpe = v; /* set the parent vpe */
  1237. if (tc >= tclimit) {
  1238. unsigned long tmp;
  1239. settc(tc);
  1240. /* Any TC that is bound to VPE0 gets left as is - in case
  1241. we are running SMTC on VPE0. A TC that is bound to any
  1242. other VPE gets bound to VPE0, ideally I'd like to make
  1243. it homeless but it doesn't appear to let me bind a TC
  1244. to a non-existent VPE. Which is perfectly reasonable.
  1245. The (un)bound state is visible to an EJTAG probe so may
  1246. notify GDB...
  1247. */
  1248. if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) {
  1249. /* tc is bound >vpe0 */
  1250. write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
  1251. t->pvpe = get_vpe(0); /* set the parent vpe */
  1252. }
  1253. /* halt the TC */
  1254. write_tc_c0_tchalt(TCHALT_H);
  1255. mips_ihb();
  1256. tmp = read_tc_c0_tcstatus();
  1257. /* mark not activated and not dynamically allocatable */
  1258. tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
  1259. tmp |= TCSTATUS_IXMT; /* interrupt exempt */
  1260. write_tc_c0_tcstatus(tmp);
  1261. }
  1262. }
  1263. out_reenable:
  1264. /* release config state */
  1265. clear_c0_mvpcontrol(MVPCONTROL_VPC);
  1266. evpe(vpflags);
  1267. emt(mtflags);
  1268. local_irq_restore(flags);
  1269. #ifdef CONFIG_MIPS_APSP_KSPD
  1270. kspd_events.kspd_sp_exit = kspd_sp_exit;
  1271. #endif
  1272. return 0;
  1273. out_class:
  1274. class_unregister(&vpe_class);
  1275. out_chrdev:
  1276. unregister_chrdev(major, module_name);
  1277. out:
  1278. return err;
  1279. }
  1280. static void __exit vpe_module_exit(void)
  1281. {
  1282. struct vpe *v, *n;
  1283. device_del(&vpe_device);
  1284. unregister_chrdev(major, module_name);
  1285. /* No locking needed here */
  1286. list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
  1287. if (v->state != VPE_STATE_UNUSED)
  1288. release_vpe(v);
  1289. }
  1290. }
  1291. module_init(vpe_module_init);
  1292. module_exit(vpe_module_exit);
  1293. MODULE_DESCRIPTION("MIPS VPE Loader");
  1294. MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
  1295. MODULE_LICENSE("GPL");