board-msm7x30.c 4.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151
  1. /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
  2. *
  3. * This program is free software; you can redistribute it and/or modify
  4. * it under the terms of the GNU General Public License version 2 and
  5. * only version 2 as published by the Free Software Foundation.
  6. *
  7. * This program is distributed in the hope that it will be useful,
  8. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. * GNU General Public License for more details.
  11. *
  12. * You should have received a copy of the GNU General Public License
  13. * along with this program; if not, write to the Free Software
  14. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  15. * 02110-1301, USA.
  16. */
  17. #include <linux/gpio.h>
  18. #include <linux/kernel.h>
  19. #include <linux/irq.h>
  20. #include <linux/gpio.h>
  21. #include <linux/platform_device.h>
  22. #include <linux/delay.h>
  23. #include <linux/io.h>
  24. #include <linux/smsc911x.h>
  25. #include <linux/usb/msm_hsusb.h>
  26. #include <linux/clkdev.h>
  27. #include <linux/memblock.h>
  28. #include <asm/mach-types.h>
  29. #include <asm/mach/arch.h>
  30. #include <asm/memory.h>
  31. #include <asm/setup.h>
  32. #include <mach/board.h>
  33. #include <mach/msm_iomap.h>
  34. #include <mach/dma.h>
  35. #include <mach/vreg.h>
  36. #include "devices.h"
  37. #include "gpiomux.h"
  38. #include "proc_comm.h"
  39. extern struct sys_timer msm_timer;
  40. static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
  41. struct meminfo *mi)
  42. {
  43. for (; tag->hdr.size; tag = tag_next(tag))
  44. if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
  45. tag->u.mem.start = 0;
  46. tag->u.mem.size += SZ_2M;
  47. }
  48. }
  49. static void __init msm7x30_reserve(void)
  50. {
  51. memblock_remove(0x0, SZ_2M);
  52. }
  53. static int hsusb_phy_init_seq[] = {
  54. 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
  55. 0x02, 0x36, /* Disable CDR Auto Reset feature */
  56. -1
  57. };
  58. static struct msm_otg_platform_data msm_otg_pdata = {
  59. .phy_init_seq = hsusb_phy_init_seq,
  60. .mode = USB_PERIPHERAL,
  61. .otg_control = OTG_PHY_CONTROL,
  62. };
  63. struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
  64. #ifdef CONFIG_SERIAL_MSM_CONSOLE
  65. [49] = { /* UART2 RFR */
  66. .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
  67. GPIOMUX_FUNC_2 | GPIOMUX_VALID,
  68. },
  69. [50] = { /* UART2 CTS */
  70. .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
  71. GPIOMUX_FUNC_2 | GPIOMUX_VALID,
  72. },
  73. [51] = { /* UART2 RX */
  74. .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
  75. GPIOMUX_FUNC_2 | GPIOMUX_VALID,
  76. },
  77. [52] = { /* UART2 TX */
  78. .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
  79. GPIOMUX_FUNC_2 | GPIOMUX_VALID,
  80. },
  81. #endif
  82. };
  83. static struct platform_device *devices[] __initdata = {
  84. #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
  85. &msm_device_uart2,
  86. #endif
  87. &msm_device_smd,
  88. &msm_device_otg,
  89. &msm_device_hsusb,
  90. &msm_device_hsusb_host,
  91. };
  92. static void __init msm7x30_init_irq(void)
  93. {
  94. msm_init_irq();
  95. }
  96. static void __init msm7x30_init(void)
  97. {
  98. msm_device_otg.dev.platform_data = &msm_otg_pdata;
  99. msm_device_hsusb.dev.parent = &msm_device_otg.dev;
  100. msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
  101. platform_add_devices(devices, ARRAY_SIZE(devices));
  102. }
  103. static void __init msm7x30_map_io(void)
  104. {
  105. msm_map_msm7x30_io();
  106. msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
  107. }
  108. MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
  109. .atag_offset = 0x100,
  110. .fixup = msm7x30_fixup,
  111. .reserve = msm7x30_reserve,
  112. .map_io = msm7x30_map_io,
  113. .init_irq = msm7x30_init_irq,
  114. .init_machine = msm7x30_init,
  115. .timer = &msm_timer,
  116. MACHINE_END
  117. MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
  118. .atag_offset = 0x100,
  119. .fixup = msm7x30_fixup,
  120. .reserve = msm7x30_reserve,
  121. .map_io = msm7x30_map_io,
  122. .init_irq = msm7x30_init_irq,
  123. .init_machine = msm7x30_init,
  124. .timer = &msm_timer,
  125. MACHINE_END
  126. MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
  127. .atag_offset = 0x100,
  128. .fixup = msm7x30_fixup,
  129. .reserve = msm7x30_reserve,
  130. .map_io = msm7x30_map_io,
  131. .init_irq = msm7x30_init_irq,
  132. .init_machine = msm7x30_init,
  133. .timer = &msm_timer,
  134. MACHINE_END