actbl.h 15 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322
  1. /******************************************************************************
  2. *
  3. * Name: actbl.h - Basic ACPI Table Definitions
  4. *
  5. *****************************************************************************/
  6. /*
  7. * Copyright (C) 2000 - 2008, Intel Corp.
  8. * All rights reserved.
  9. *
  10. * Redistribution and use in source and binary forms, with or without
  11. * modification, are permitted provided that the following conditions
  12. * are met:
  13. * 1. Redistributions of source code must retain the above copyright
  14. * notice, this list of conditions, and the following disclaimer,
  15. * without modification.
  16. * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  17. * substantially similar to the "NO WARRANTY" disclaimer below
  18. * ("Disclaimer") and any redistribution must be conditioned upon
  19. * including a substantially similar Disclaimer requirement for further
  20. * binary redistribution.
  21. * 3. Neither the names of the above-listed copyright holders nor the names
  22. * of any contributors may be used to endorse or promote products derived
  23. * from this software without specific prior written permission.
  24. *
  25. * Alternatively, this software may be distributed under the terms of the
  26. * GNU General Public License ("GPL") version 2 as published by the Free
  27. * Software Foundation.
  28. *
  29. * NO WARRANTY
  30. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  31. * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  32. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  33. * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  34. * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  35. * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  36. * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  37. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  38. * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  39. * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  40. * POSSIBILITY OF SUCH DAMAGES.
  41. */
  42. #ifndef __ACTBL_H__
  43. #define __ACTBL_H__
  44. /*
  45. * Values for description table header signatures. Useful because they make
  46. * it more difficult to inadvertently type in the wrong signature.
  47. */
  48. #define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
  49. #define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
  50. #define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */
  51. #define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */
  52. #define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */
  53. #define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */
  54. #define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */
  55. #define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */
  56. #define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */
  57. /*
  58. * All tables and structures must be byte-packed to match the ACPI
  59. * specification, since the tables are provided by the system BIOS
  60. */
  61. #pragma pack(1)
  62. /*
  63. * These are the ACPI tables that are directly consumed by the subsystem.
  64. *
  65. * The RSDP and FACS do not use the common ACPI table header. All other ACPI
  66. * tables use the header.
  67. *
  68. * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
  69. * This is the only type that is even remotely portable. Anything else is not
  70. * portable, so do not use any other bitfield types.
  71. */
  72. /*******************************************************************************
  73. *
  74. * ACPI Table Header. This common header is used by all tables except the
  75. * RSDP and FACS. The define is used for direct inclusion of header into
  76. * other ACPI tables
  77. *
  78. ******************************************************************************/
  79. struct acpi_table_header {
  80. char signature[ACPI_NAME_SIZE]; /* ASCII table signature */
  81. u32 length; /* Length of table in bytes, including this header */
  82. u8 revision; /* ACPI Specification minor version # */
  83. u8 checksum; /* To make sum of entire table == 0 */
  84. char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */
  85. char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */
  86. u32 oem_revision; /* OEM revision number */
  87. char asl_compiler_id[ACPI_NAME_SIZE]; /* ASCII ASL compiler vendor ID */
  88. u32 asl_compiler_revision; /* ASL compiler version */
  89. };
  90. /*
  91. * GAS - Generic Address Structure (ACPI 2.0+)
  92. *
  93. * Note: Since this structure is used in the ACPI tables, it is byte aligned.
  94. * If misalignment is not supported, access to the Address field must be
  95. * performed with care.
  96. */
  97. struct acpi_generic_address {
  98. u8 space_id; /* Address space where struct or register exists */
  99. u8 bit_width; /* Size in bits of given register */
  100. u8 bit_offset; /* Bit offset within the register */
  101. u8 access_width; /* Minimum Access size (ACPI 3.0) */
  102. u64 address; /* 64-bit address of struct or register */
  103. };
  104. /*******************************************************************************
  105. *
  106. * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
  107. *
  108. ******************************************************************************/
  109. struct acpi_table_rsdp {
  110. char signature[8]; /* ACPI signature, contains "RSD PTR " */
  111. u8 checksum; /* ACPI 1.0 checksum */
  112. char oem_id[ACPI_OEM_ID_SIZE]; /* OEM identification */
  113. u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
  114. u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */
  115. u32 length; /* Table length in bytes, including header (ACPI 2.0+) */
  116. u64 xsdt_physical_address; /* 64-bit physical address of the XSDT (ACPI 2.0+) */
  117. u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */
  118. u8 reserved[3]; /* Reserved, must be zero */
  119. };
  120. #define ACPI_RSDP_REV0_SIZE 20 /* Size of original ACPI 1.0 RSDP */
  121. /*******************************************************************************
  122. *
  123. * RSDT/XSDT - Root System Description Tables
  124. *
  125. ******************************************************************************/
  126. struct acpi_table_rsdt {
  127. struct acpi_table_header header; /* Common ACPI table header */
  128. u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
  129. };
  130. struct acpi_table_xsdt {
  131. struct acpi_table_header header; /* Common ACPI table header */
  132. u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */
  133. };
  134. /*******************************************************************************
  135. *
  136. * FACS - Firmware ACPI Control Structure (FACS)
  137. *
  138. ******************************************************************************/
  139. struct acpi_table_facs {
  140. char signature[4]; /* ASCII table signature */
  141. u32 length; /* Length of structure, in bytes */
  142. u32 hardware_signature; /* Hardware configuration signature */
  143. u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */
  144. u32 global_lock; /* Global Lock for shared hardware resources */
  145. u32 flags;
  146. u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
  147. u8 version; /* Version of this table (ACPI 2.0+) */
  148. u8 reserved[31]; /* Reserved, must be zero */
  149. };
  150. /* Flag macros */
  151. #define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
  152. /* Global lock flags */
  153. #define ACPI_GLOCK_PENDING 0x01 /* 00: Pending global lock ownership */
  154. #define ACPI_GLOCK_OWNED 0x02 /* 01: Global lock is owned */
  155. /*******************************************************************************
  156. *
  157. * FADT - Fixed ACPI Description Table (Signature "FACP")
  158. *
  159. ******************************************************************************/
  160. /* Fields common to all versions of the FADT */
  161. struct acpi_table_fadt {
  162. struct acpi_table_header header; /* Common ACPI table header */
  163. u32 facs; /* 32-bit physical address of FACS */
  164. u32 dsdt; /* 32-bit physical address of DSDT */
  165. u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
  166. u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */
  167. u16 sci_interrupt; /* System vector of SCI interrupt */
  168. u32 smi_command; /* 32-bit Port address of SMI command port */
  169. u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
  170. u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
  171. u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
  172. u8 pstate_control; /* Processor performance state control */
  173. u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
  174. u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
  175. u32 pm1a_control_block; /* 32-bit Port address of Power Mgt 1a Control Reg Blk */
  176. u32 pm1b_control_block; /* 32-bit Port address of Power Mgt 1b Control Reg Blk */
  177. u32 pm2_control_block; /* 32-bit Port address of Power Mgt 2 Control Reg Blk */
  178. u32 pm_timer_block; /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
  179. u32 gpe0_block; /* 32-bit Port address of General Purpose Event 0 Reg Blk */
  180. u32 gpe1_block; /* 32-bit Port address of General Purpose Event 1 Reg Blk */
  181. u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */
  182. u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */
  183. u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */
  184. u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */
  185. u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */
  186. u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
  187. u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
  188. u8 cst_control; /* Support for the _CST object and C States change notification */
  189. u16 C2latency; /* Worst case HW latency to enter/exit C2 state */
  190. u16 C3latency; /* Worst case HW latency to enter/exit C3 state */
  191. u16 flush_size; /* Processor's memory cache line width, in bytes */
  192. u16 flush_stride; /* Number of flush strides that need to be read */
  193. u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */
  194. u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */
  195. u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */
  196. u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */
  197. u8 century; /* Index to century in RTC CMOS RAM */
  198. u16 boot_flags; /* IA-PC Boot Architecture Flags (see below for individual flags) */
  199. u8 reserved; /* Reserved, must be zero */
  200. u32 flags; /* Miscellaneous flag bits (see below for individual flags) */
  201. struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */
  202. u8 reset_value; /* Value to write to the reset_register port to reset the system */
  203. u8 reserved4[3]; /* Reserved, must be zero */
  204. u64 Xfacs; /* 64-bit physical address of FACS */
  205. u64 Xdsdt; /* 64-bit physical address of DSDT */
  206. struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
  207. struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
  208. struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
  209. struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
  210. struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
  211. struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
  212. struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
  213. struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
  214. };
  215. /* FADT Boot Architecture Flags (boot_flags) */
  216. #define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
  217. #define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
  218. #define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */
  219. #define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
  220. #define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */
  221. #define FADT2_REVISION_ID 3
  222. /* FADT flags */
  223. #define ACPI_FADT_WBINVD (1) /* 00: [V1] The wbinvd instruction works properly */
  224. #define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] wbinvd flushes but does not invalidate caches */
  225. #define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
  226. #define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
  227. #define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */
  228. #define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */
  229. #define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status not in fixed register space */
  230. #define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */
  231. #define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
  232. #define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */
  233. #define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */
  234. #define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */
  235. #define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */
  236. #define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */
  237. #define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
  238. #define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
  239. #define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
  240. #define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
  241. #define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
  242. #define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
  243. /* FADT Prefered Power Management Profiles */
  244. enum acpi_prefered_pm_profiles {
  245. PM_UNSPECIFIED = 0,
  246. PM_DESKTOP = 1,
  247. PM_MOBILE = 2,
  248. PM_WORKSTATION = 3,
  249. PM_ENTERPRISE_SERVER = 4,
  250. PM_SOHO_SERVER = 5,
  251. PM_APPLIANCE_PC = 6
  252. };
  253. /* Reset to default packing */
  254. #pragma pack()
  255. #define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_fadt, f)
  256. union acpi_name_union {
  257. u32 integer;
  258. char ascii[4];
  259. };
  260. /*
  261. * Internal ACPI Table Descriptor. One per ACPI table
  262. */
  263. struct acpi_table_desc {
  264. acpi_physical_address address;
  265. struct acpi_table_header *pointer;
  266. u32 length; /* Length fixed at 32 bits */
  267. union acpi_name_union signature;
  268. acpi_owner_id owner_id;
  269. u8 flags;
  270. };
  271. /* Flags for above */
  272. #define ACPI_TABLE_ORIGIN_UNKNOWN (0)
  273. #define ACPI_TABLE_ORIGIN_MAPPED (1)
  274. #define ACPI_TABLE_ORIGIN_ALLOCATED (2)
  275. #define ACPI_TABLE_ORIGIN_OVERRIDE (4)
  276. #define ACPI_TABLE_ORIGIN_MASK (7)
  277. #define ACPI_TABLE_IS_LOADED (8)
  278. /*
  279. * Get the remaining ACPI tables
  280. */
  281. #include <acpi/actbl1.h>
  282. #endif /* __ACTBL_H__ */