spi_txx9.c 12 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475
  1. /*
  2. * spi_txx9.c - TXx9 SPI controller driver.
  3. *
  4. * Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
  5. * Copyright (C) 2000-2001 Toshiba Corporation
  6. *
  7. * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
  8. * terms of the GNU General Public License version 2. This program is
  9. * licensed "as is" without any warranty of any kind, whether express
  10. * or implied.
  11. *
  12. * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
  13. *
  14. * Convert to generic SPI framework - Atsushi Nemoto (anemo@mba.ocn.ne.jp)
  15. */
  16. #include <linux/init.h>
  17. #include <linux/delay.h>
  18. #include <linux/errno.h>
  19. #include <linux/interrupt.h>
  20. #include <linux/platform_device.h>
  21. #include <linux/sched.h>
  22. #include <linux/spinlock.h>
  23. #include <linux/workqueue.h>
  24. #include <linux/spi/spi.h>
  25. #include <linux/err.h>
  26. #include <linux/clk.h>
  27. #include <linux/io.h>
  28. #include <asm/gpio.h>
  29. #define SPI_FIFO_SIZE 4
  30. #define TXx9_SPMCR 0x00
  31. #define TXx9_SPCR0 0x04
  32. #define TXx9_SPCR1 0x08
  33. #define TXx9_SPFS 0x0c
  34. #define TXx9_SPSR 0x14
  35. #define TXx9_SPDR 0x18
  36. /* SPMCR : SPI Master Control */
  37. #define TXx9_SPMCR_OPMODE 0xc0
  38. #define TXx9_SPMCR_CONFIG 0x40
  39. #define TXx9_SPMCR_ACTIVE 0x80
  40. #define TXx9_SPMCR_SPSTP 0x02
  41. #define TXx9_SPMCR_BCLR 0x01
  42. /* SPCR0 : SPI Control 0 */
  43. #define TXx9_SPCR0_TXIFL_MASK 0xc000
  44. #define TXx9_SPCR0_RXIFL_MASK 0x3000
  45. #define TXx9_SPCR0_SIDIE 0x0800
  46. #define TXx9_SPCR0_SOEIE 0x0400
  47. #define TXx9_SPCR0_RBSIE 0x0200
  48. #define TXx9_SPCR0_TBSIE 0x0100
  49. #define TXx9_SPCR0_IFSPSE 0x0010
  50. #define TXx9_SPCR0_SBOS 0x0004
  51. #define TXx9_SPCR0_SPHA 0x0002
  52. #define TXx9_SPCR0_SPOL 0x0001
  53. /* SPSR : SPI Status */
  54. #define TXx9_SPSR_TBSI 0x8000
  55. #define TXx9_SPSR_RBSI 0x4000
  56. #define TXx9_SPSR_TBS_MASK 0x3800
  57. #define TXx9_SPSR_RBS_MASK 0x0700
  58. #define TXx9_SPSR_SPOE 0x0080
  59. #define TXx9_SPSR_IFSD 0x0008
  60. #define TXx9_SPSR_SIDLE 0x0004
  61. #define TXx9_SPSR_STRDY 0x0002
  62. #define TXx9_SPSR_SRRDY 0x0001
  63. struct txx9spi {
  64. struct workqueue_struct *workqueue;
  65. struct work_struct work;
  66. spinlock_t lock; /* protect 'queue' */
  67. struct list_head queue;
  68. wait_queue_head_t waitq;
  69. void __iomem *membase;
  70. int baseclk;
  71. struct clk *clk;
  72. u32 max_speed_hz, min_speed_hz;
  73. int last_chipselect;
  74. int last_chipselect_val;
  75. };
  76. static u32 txx9spi_rd(struct txx9spi *c, int reg)
  77. {
  78. return __raw_readl(c->membase + reg);
  79. }
  80. static void txx9spi_wr(struct txx9spi *c, u32 val, int reg)
  81. {
  82. __raw_writel(val, c->membase + reg);
  83. }
  84. static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c,
  85. int on, unsigned int cs_delay)
  86. {
  87. int val = (spi->mode & SPI_CS_HIGH) ? on : !on;
  88. if (on) {
  89. /* deselect the chip with cs_change hint in last transfer */
  90. if (c->last_chipselect >= 0)
  91. gpio_set_value(c->last_chipselect,
  92. !c->last_chipselect_val);
  93. c->last_chipselect = spi->chip_select;
  94. c->last_chipselect_val = val;
  95. } else {
  96. c->last_chipselect = -1;
  97. ndelay(cs_delay); /* CS Hold Time */
  98. }
  99. gpio_set_value(spi->chip_select, val);
  100. ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */
  101. }
  102. static int txx9spi_setup(struct spi_device *spi)
  103. {
  104. struct txx9spi *c = spi_master_get_devdata(spi->master);
  105. u8 bits_per_word;
  106. if (!spi->max_speed_hz
  107. || spi->max_speed_hz > c->max_speed_hz
  108. || spi->max_speed_hz < c->min_speed_hz)
  109. return -EINVAL;
  110. bits_per_word = spi->bits_per_word;
  111. if (bits_per_word != 8 && bits_per_word != 16)
  112. return -EINVAL;
  113. if (gpio_direction_output(spi->chip_select,
  114. !(spi->mode & SPI_CS_HIGH))) {
  115. dev_err(&spi->dev, "Cannot setup GPIO for chipselect.\n");
  116. return -EINVAL;
  117. }
  118. /* deselect chip */
  119. spin_lock(&c->lock);
  120. txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz);
  121. spin_unlock(&c->lock);
  122. return 0;
  123. }
  124. static irqreturn_t txx9spi_interrupt(int irq, void *dev_id)
  125. {
  126. struct txx9spi *c = dev_id;
  127. /* disable rx intr */
  128. txx9spi_wr(c, txx9spi_rd(c, TXx9_SPCR0) & ~TXx9_SPCR0_RBSIE,
  129. TXx9_SPCR0);
  130. wake_up(&c->waitq);
  131. return IRQ_HANDLED;
  132. }
  133. static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
  134. {
  135. struct spi_device *spi = m->spi;
  136. struct spi_transfer *t;
  137. unsigned int cs_delay;
  138. unsigned int cs_change = 1;
  139. int status = 0;
  140. u32 mcr;
  141. u32 prev_speed_hz = 0;
  142. u8 prev_bits_per_word = 0;
  143. /* CS setup/hold/recovery time in nsec */
  144. cs_delay = 100 + (NSEC_PER_SEC / 2) / spi->max_speed_hz;
  145. mcr = txx9spi_rd(c, TXx9_SPMCR);
  146. if (unlikely((mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE)) {
  147. dev_err(&spi->dev, "Bad mode.\n");
  148. status = -EIO;
  149. goto exit;
  150. }
  151. mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
  152. /* enter config mode */
  153. txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
  154. txx9spi_wr(c, TXx9_SPCR0_SBOS
  155. | ((spi->mode & SPI_CPOL) ? TXx9_SPCR0_SPOL : 0)
  156. | ((spi->mode & SPI_CPHA) ? TXx9_SPCR0_SPHA : 0)
  157. | 0x08,
  158. TXx9_SPCR0);
  159. list_for_each_entry (t, &m->transfers, transfer_list) {
  160. const void *txbuf = t->tx_buf;
  161. void *rxbuf = t->rx_buf;
  162. u32 data;
  163. unsigned int len = t->len;
  164. unsigned int wsize;
  165. u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
  166. u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
  167. bits_per_word = bits_per_word ? : 8;
  168. wsize = bits_per_word >> 3; /* in bytes */
  169. if (prev_speed_hz != speed_hz
  170. || prev_bits_per_word != bits_per_word) {
  171. u32 n = (c->baseclk + speed_hz - 1) / speed_hz;
  172. if (n < 1)
  173. n = 1;
  174. else if (n > 0xff)
  175. n = 0xff;
  176. /* enter config mode */
  177. txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR,
  178. TXx9_SPMCR);
  179. txx9spi_wr(c, (n << 8) | bits_per_word, TXx9_SPCR1);
  180. /* enter active mode */
  181. txx9spi_wr(c, mcr | TXx9_SPMCR_ACTIVE, TXx9_SPMCR);
  182. prev_speed_hz = speed_hz;
  183. prev_bits_per_word = bits_per_word;
  184. }
  185. if (cs_change)
  186. txx9spi_cs_func(spi, c, 1, cs_delay);
  187. cs_change = t->cs_change;
  188. while (len) {
  189. unsigned int count = SPI_FIFO_SIZE;
  190. int i;
  191. u32 cr0;
  192. if (len < count * wsize)
  193. count = len / wsize;
  194. /* now tx must be idle... */
  195. while (!(txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_SIDLE))
  196. cpu_relax();
  197. cr0 = txx9spi_rd(c, TXx9_SPCR0);
  198. cr0 &= ~TXx9_SPCR0_RXIFL_MASK;
  199. cr0 |= (count - 1) << 12;
  200. /* enable rx intr */
  201. cr0 |= TXx9_SPCR0_RBSIE;
  202. txx9spi_wr(c, cr0, TXx9_SPCR0);
  203. /* send */
  204. for (i = 0; i < count; i++) {
  205. if (txbuf) {
  206. data = (wsize == 1)
  207. ? *(const u8 *)txbuf
  208. : *(const u16 *)txbuf;
  209. txx9spi_wr(c, data, TXx9_SPDR);
  210. txbuf += wsize;
  211. } else
  212. txx9spi_wr(c, 0, TXx9_SPDR);
  213. }
  214. /* wait all rx data */
  215. wait_event(c->waitq,
  216. txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_RBSI);
  217. /* receive */
  218. for (i = 0; i < count; i++) {
  219. data = txx9spi_rd(c, TXx9_SPDR);
  220. if (rxbuf) {
  221. if (wsize == 1)
  222. *(u8 *)rxbuf = data;
  223. else
  224. *(u16 *)rxbuf = data;
  225. rxbuf += wsize;
  226. }
  227. }
  228. len -= count * wsize;
  229. }
  230. m->actual_length += t->len;
  231. if (t->delay_usecs)
  232. udelay(t->delay_usecs);
  233. if (!cs_change)
  234. continue;
  235. if (t->transfer_list.next == &m->transfers)
  236. break;
  237. /* sometimes a short mid-message deselect of the chip
  238. * may be needed to terminate a mode or command
  239. */
  240. txx9spi_cs_func(spi, c, 0, cs_delay);
  241. }
  242. exit:
  243. m->status = status;
  244. m->complete(m->context);
  245. /* normally deactivate chipselect ... unless no error and
  246. * cs_change has hinted that the next message will probably
  247. * be for this chip too.
  248. */
  249. if (!(status == 0 && cs_change))
  250. txx9spi_cs_func(spi, c, 0, cs_delay);
  251. /* enter config mode */
  252. txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
  253. }
  254. static void txx9spi_work(struct work_struct *work)
  255. {
  256. struct txx9spi *c = container_of(work, struct txx9spi, work);
  257. unsigned long flags;
  258. spin_lock_irqsave(&c->lock, flags);
  259. while (!list_empty(&c->queue)) {
  260. struct spi_message *m;
  261. m = container_of(c->queue.next, struct spi_message, queue);
  262. list_del_init(&m->queue);
  263. spin_unlock_irqrestore(&c->lock, flags);
  264. txx9spi_work_one(c, m);
  265. spin_lock_irqsave(&c->lock, flags);
  266. }
  267. spin_unlock_irqrestore(&c->lock, flags);
  268. }
  269. static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
  270. {
  271. struct spi_master *master = spi->master;
  272. struct txx9spi *c = spi_master_get_devdata(master);
  273. struct spi_transfer *t;
  274. unsigned long flags;
  275. m->actual_length = 0;
  276. /* check each transfer's parameters */
  277. list_for_each_entry (t, &m->transfers, transfer_list) {
  278. u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
  279. u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
  280. bits_per_word = bits_per_word ? : 8;
  281. if (!t->tx_buf && !t->rx_buf && t->len)
  282. return -EINVAL;
  283. if (bits_per_word != 8 && bits_per_word != 16)
  284. return -EINVAL;
  285. if (t->len & ((bits_per_word >> 3) - 1))
  286. return -EINVAL;
  287. if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz)
  288. return -EINVAL;
  289. }
  290. spin_lock_irqsave(&c->lock, flags);
  291. list_add_tail(&m->queue, &c->queue);
  292. queue_work(c->workqueue, &c->work);
  293. spin_unlock_irqrestore(&c->lock, flags);
  294. return 0;
  295. }
  296. static int __init txx9spi_probe(struct platform_device *dev)
  297. {
  298. struct spi_master *master;
  299. struct txx9spi *c;
  300. struct resource *res;
  301. int ret = -ENODEV;
  302. u32 mcr;
  303. int irq;
  304. master = spi_alloc_master(&dev->dev, sizeof(*c));
  305. if (!master)
  306. return ret;
  307. c = spi_master_get_devdata(master);
  308. platform_set_drvdata(dev, master);
  309. INIT_WORK(&c->work, txx9spi_work);
  310. spin_lock_init(&c->lock);
  311. INIT_LIST_HEAD(&c->queue);
  312. init_waitqueue_head(&c->waitq);
  313. c->clk = clk_get(&dev->dev, "spi-baseclk");
  314. if (IS_ERR(c->clk)) {
  315. ret = PTR_ERR(c->clk);
  316. c->clk = NULL;
  317. goto exit;
  318. }
  319. ret = clk_enable(c->clk);
  320. if (ret) {
  321. clk_put(c->clk);
  322. c->clk = NULL;
  323. goto exit;
  324. }
  325. c->baseclk = clk_get_rate(c->clk);
  326. c->min_speed_hz = (c->baseclk + 0xff - 1) / 0xff;
  327. c->max_speed_hz = c->baseclk;
  328. res = platform_get_resource(dev, IORESOURCE_MEM, 0);
  329. if (!res)
  330. goto exit_busy;
  331. if (!devm_request_mem_region(&dev->dev,
  332. res->start, res->end - res->start + 1,
  333. "spi_txx9"))
  334. goto exit_busy;
  335. c->membase = devm_ioremap(&dev->dev,
  336. res->start, res->end - res->start + 1);
  337. if (!c->membase)
  338. goto exit_busy;
  339. /* enter config mode */
  340. mcr = txx9spi_rd(c, TXx9_SPMCR);
  341. mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
  342. txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
  343. irq = platform_get_irq(dev, 0);
  344. if (irq < 0)
  345. goto exit_busy;
  346. ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0,
  347. "spi_txx9", c);
  348. if (ret)
  349. goto exit;
  350. c->workqueue = create_singlethread_workqueue(
  351. dev_name(master->dev.parent));
  352. if (!c->workqueue)
  353. goto exit_busy;
  354. c->last_chipselect = -1;
  355. dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
  356. (unsigned long long)res->start, irq,
  357. (c->baseclk + 500000) / 1000000);
  358. /* the spi->mode bits understood by this driver: */
  359. master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
  360. master->bus_num = dev->id;
  361. master->setup = txx9spi_setup;
  362. master->transfer = txx9spi_transfer;
  363. master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */
  364. ret = spi_register_master(master);
  365. if (ret)
  366. goto exit;
  367. return 0;
  368. exit_busy:
  369. ret = -EBUSY;
  370. exit:
  371. if (c->workqueue)
  372. destroy_workqueue(c->workqueue);
  373. if (c->clk) {
  374. clk_disable(c->clk);
  375. clk_put(c->clk);
  376. }
  377. platform_set_drvdata(dev, NULL);
  378. spi_master_put(master);
  379. return ret;
  380. }
  381. static int __exit txx9spi_remove(struct platform_device *dev)
  382. {
  383. struct spi_master *master = spi_master_get(platform_get_drvdata(dev));
  384. struct txx9spi *c = spi_master_get_devdata(master);
  385. spi_unregister_master(master);
  386. platform_set_drvdata(dev, NULL);
  387. destroy_workqueue(c->workqueue);
  388. clk_disable(c->clk);
  389. clk_put(c->clk);
  390. spi_master_put(master);
  391. return 0;
  392. }
  393. /* work with hotplug and coldplug */
  394. MODULE_ALIAS("platform:spi_txx9");
  395. static struct platform_driver txx9spi_driver = {
  396. .remove = __exit_p(txx9spi_remove),
  397. .driver = {
  398. .name = "spi_txx9",
  399. .owner = THIS_MODULE,
  400. },
  401. };
  402. static int __init txx9spi_init(void)
  403. {
  404. return platform_driver_probe(&txx9spi_driver, txx9spi_probe);
  405. }
  406. subsys_initcall(txx9spi_init);
  407. static void __exit txx9spi_exit(void)
  408. {
  409. platform_driver_unregister(&txx9spi_driver);
  410. }
  411. module_exit(txx9spi_exit);
  412. MODULE_DESCRIPTION("TXx9 SPI Driver");
  413. MODULE_LICENSE("GPL");