sas_internal.h 5.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168
  1. /*
  2. * Serial Attached SCSI (SAS) class internal header file
  3. *
  4. * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
  5. * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
  6. *
  7. * This file is licensed under GPLv2.
  8. *
  9. * This program is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License as
  11. * published by the Free Software Foundation; either version 2 of the
  12. * License, or (at your option) any later version.
  13. *
  14. * This program is distributed in the hope that it will be useful, but
  15. * WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  17. * General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  22. * USA
  23. *
  24. */
  25. #ifndef _SAS_INTERNAL_H_
  26. #define _SAS_INTERNAL_H_
  27. #include <scsi/scsi.h>
  28. #include <scsi/scsi_host.h>
  29. #include <scsi/scsi_transport_sas.h>
  30. #include <scsi/libsas.h>
  31. #define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
  32. #ifdef SAS_DEBUG
  33. #define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
  34. #else
  35. #define SAS_DPRINTK(fmt, ...)
  36. #endif
  37. #define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
  38. #define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
  39. void sas_scsi_recover_host(struct Scsi_Host *shost);
  40. int sas_show_class(enum sas_class class, char *buf);
  41. int sas_show_proto(enum sas_protocol proto, char *buf);
  42. int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
  43. int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
  44. int sas_register_phys(struct sas_ha_struct *sas_ha);
  45. void sas_unregister_phys(struct sas_ha_struct *sas_ha);
  46. int sas_register_ports(struct sas_ha_struct *sas_ha);
  47. void sas_unregister_ports(struct sas_ha_struct *sas_ha);
  48. enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
  49. int sas_init_queue(struct sas_ha_struct *sas_ha);
  50. int sas_init_events(struct sas_ha_struct *sas_ha);
  51. void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
  52. void sas_deform_port(struct asd_sas_phy *phy);
  53. void sas_porte_bytes_dmaed(struct work_struct *work);
  54. void sas_porte_broadcast_rcvd(struct work_struct *work);
  55. void sas_porte_link_reset_err(struct work_struct *work);
  56. void sas_porte_timer_event(struct work_struct *work);
  57. void sas_porte_hard_reset(struct work_struct *work);
  58. int sas_notify_lldd_dev_found(struct domain_device *);
  59. void sas_notify_lldd_dev_gone(struct domain_device *);
  60. int sas_smp_phy_control(struct domain_device *dev, int phy_id,
  61. enum phy_func phy_func, struct sas_phy_linkrates *);
  62. int sas_smp_get_phy_events(struct sas_phy *phy);
  63. struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
  64. void sas_hae_reset(struct work_struct *work);
  65. #ifdef CONFIG_SCSI_SAS_HOST_SMP
  66. extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
  67. struct request *rsp);
  68. #else
  69. static inline int sas_smp_host_handler(struct Scsi_Host *shost,
  70. struct request *req,
  71. struct request *rsp)
  72. {
  73. shost_printk(KERN_ERR, shost,
  74. "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
  75. return -EINVAL;
  76. }
  77. #endif
  78. static inline void sas_queue_event(int event, spinlock_t *lock,
  79. unsigned long *pending,
  80. struct work_struct *work,
  81. struct sas_ha_struct *sas_ha)
  82. {
  83. unsigned long flags;
  84. spin_lock_irqsave(lock, flags);
  85. if (test_bit(event, pending)) {
  86. spin_unlock_irqrestore(lock, flags);
  87. return;
  88. }
  89. __set_bit(event, pending);
  90. spin_unlock_irqrestore(lock, flags);
  91. spin_lock_irqsave(&sas_ha->state_lock, flags);
  92. if (sas_ha->state != SAS_HA_UNREGISTERED) {
  93. scsi_queue_work(sas_ha->core.shost, work);
  94. }
  95. spin_unlock_irqrestore(&sas_ha->state_lock, flags);
  96. }
  97. static inline void sas_begin_event(int event, spinlock_t *lock,
  98. unsigned long *pending)
  99. {
  100. unsigned long flags;
  101. spin_lock_irqsave(lock, flags);
  102. __clear_bit(event, pending);
  103. spin_unlock_irqrestore(lock, flags);
  104. }
  105. static inline void sas_fill_in_rphy(struct domain_device *dev,
  106. struct sas_rphy *rphy)
  107. {
  108. rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
  109. rphy->identify.initiator_port_protocols = dev->iproto;
  110. rphy->identify.target_port_protocols = dev->tproto;
  111. switch (dev->dev_type) {
  112. case SATA_DEV:
  113. /* FIXME: need sata device type */
  114. case SAS_END_DEV:
  115. rphy->identify.device_type = SAS_END_DEVICE;
  116. break;
  117. case EDGE_DEV:
  118. rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
  119. break;
  120. case FANOUT_DEV:
  121. rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
  122. break;
  123. default:
  124. rphy->identify.device_type = SAS_PHY_UNUSED;
  125. break;
  126. }
  127. }
  128. static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
  129. {
  130. struct expander_device *ex = &dev->ex_dev;
  131. struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
  132. if (!ex->parent_port) {
  133. ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
  134. /* FIXME: error handling */
  135. BUG_ON(!ex->parent_port);
  136. BUG_ON(sas_port_add(ex->parent_port));
  137. sas_port_mark_backlink(ex->parent_port);
  138. }
  139. sas_port_add_phy(ex->parent_port, ex_phy->phy);
  140. }
  141. #endif /* _SAS_INTERNAL_H_ */